My Overland Trailer Build - DIY Camping Trailer Walkaround

This is my custom homebuilt Overland/Camper Trailer I built to make camping easier, more comfortable and more fun to get out and have a good time. This is definitely something I looked to KZbin a ton for inspiration and thought I'd give back by showing what KZbin helped me accomplish. I learned to weld for this and am pretty happy with how it turned out, if you enjoyed this video be sure to like and subscribe to see more!
Thanks for watching!

[@scottstewartar]

Nice job! Starting a build this week! Great inspiration!

[@JonathanShidler]

Thank you for so succinctly showing your build

[@joanies6778]

Nice build. Very utilitarian, which is what you need. My only issue is getting my dog into the tent, or I'd get a roof tent in a heartbeat.

[@GoXplr]

Nice job sir. Building one now. Cant wait to get it on the road ...

[@NavigatingwithNafe]

Not a bad build, not bad at all! 👍... I agree with you about building a drawer system for the back. It would definitely help keep your gear more secure & organized. Great job!!

[@javilee98]

If you enjoyed this video and want to see more of my work, check out below. I'm building another trailer! You can see episode 1 here where we discuss tools and planning needed: kzbin.info/www/bejne/oIK1eaatYtR2b7M Episode 2 - Where we start on the frame construction! - kzbin.info/www/bejne/iHXNdWqIiKaae7M Thanks for watching!

[@janzgormysyny5830]

Projekt wspaniały, ale najpiękniejsze jest to że się dzielisz swoim doswiadczeniem.👍

[@606302989]

Awesome realistic trailer.

[@detngator]

I have seen that light set up in a cabin and it works better than light bulbs 😊

[@mainelybuds8543]

That's a very cool, functional build. The only thing I would change is the rear door. I think a drop down tailgate style would better suit my needs. I can always use a large, flat surface to work from. Thanks for sharing!

[@javilee98]

I think my back area is too deep so if I did a drop down tailgate it would've been too difficult to reach the very back items. Definitely would work great with a drawer system though!

[@mainelybuds8543]

@@javilee98 You're right, it would be too far of a reach. A drop down table mounted to that door makes way more sense. Thanks for sharing and replying, every bit helps me plan my build.

[@desertd2609]

Nice budget build, I like it! The only thing I would have to do differently is an over under swap on the axle for more clearance out in my area of Overlanding. I have some items I removed from an old cab-over camper I plan to use to save me some money on a build but first I need to get my tow pig in order which I just purchased 2 weeks ago!

[@javilee98]

I actually do have the springs over the axle specifically for the ground clearance like you said! Although, not needed much here in FL.

[@overland_dadsfl]

That is an impressive build. Kudos 👍👍

[@javilee98]

Thanks!

[@cjg6064]

Love it. I've got an 8ft Utility trailer that I want to convert to a camping trailer and this build is a perfect foundation.

[@javilee98]

Go for it! Building one to fit your needs specifically is a great feeling.

[@JonathanShidler]

Same thought goes through my head every week. Update us when you do it!

[@cjg6064]

@@JonathanShidler I've been designing it and I just bought the metal cutting band saw I need to cut material. Gonna start welding soon. 😍

[@Dagreenberg68]

I have almost literally the same trailer but I have independent suspension 15 inch wheels and I have trailer brakes. I have a Smitty built Tent, but mine is suspended on almost 4 foot high rack and then I have a smaller rack for canoes or kayaks.

[@Iyanrach]

Nice work Man.

[@javilee98]

Thank you!

[@1800dontcare]

Very nice setup. I am currently in the process of modifying our Tradies Trailer into a Camper it has a bit of work to go lol however just starting out with the trailer to store all of the camping gear etc however yea eventually like you and a few other builders I cannot wait to have it finally completed but a long way to go yet and eventually it will cost thousands less than pre-built setups!

[@javilee98]

It's a lot of work, costs more to make than initially planned, but after all said and done it's still thousands cheaper than anything else.

[@1800dontcare]

@@javilee98 that is the yes. the trailer is brand new with a fully enclosed canopy with ladder racks on it so some of the work is already done lol except the RTT I want to get needs an additional 2 racks to secure it properly which isn’t an issue. It’s the 12v system install that is doing my head in 🤣

[@gopackgo69]

Great build and looks very functional.

[@livingworkingoutsidebox]

Nice build thanks for sharing. About how much did you spend on it. Building it yourself.

[@javilee98]

Overall I believe the total came out to $2000 - $2500, Including the tent.

[@livingworkingoutsidebox]

@@javilee98 thanks for sharing 👍

[@offroadlander9357]

Nice job man. I am thinking of building a trailer. Just looking for a good foundation.

[@javilee98]

Thank you! This one started it's first life as a harbor freight trailer and then I spiced it up a bit :D

[@offroadlander9357]

@@javilee98 what model/size?

[@javilee98]

This one started as the 40"x48" that I chopped up and reused the metal to create the 4'x6' frame. I should've looked for a 4x8 folding model initially as it would've been easier/cheaper.

[@b.a.1147]

Hey. Just found this video. Great Job! I have a shell I’m working with that is very similar to yours. A couple questions…What size is the opening for your slide out drawer and how high is the platform for your RTT? Thanks!

[@javilee98]

I don't have the trailer anymore but I believe the side opening was right around 18 inches and the roof rack was sitting around 5 ½ ft.

[@bluemax_overland]

Hi there. Nice trailer you built. Can you share the link of the website for the springs/shock combo you purchased? Thanks

[@javilee98]

The shocks are Monroe 555002 from Amazon - a.co/iQydlFJ Leaf springs are from www.stengelbros.com/trailer-suspension-parts/trailer-leaf-springs/ and are US -1030 28" 740LB springs. A pretty cheap suspension setup that works pretty well for what I ask of it!

[@danielbichokov1340]

Hi, very nice build. Can you give more details on how you did the edge where the weather strip is laying ? Also what size square tubing you used for the build and how thick ? Thank you for the great content.

[@javilee98]

Sure i'll do my best! So square tubing for the bottom of the frame is 1/8" thick 2x2 tubing. The walls are 1/16" thick 1½x1½ tubing to reduce weight and I didn't find any issues with structural issues. How i did the weather stripping edge was taking some 1/2" angle iron and just welding it in place to be flush with the inside edge of the square tubing. Here is a decent image during the build process to show it. imgur.com/atSiiUv

[@patrickdoyle6519]

So you welded the angle iron inside the box, then fit the door to those dimensions? And what just glued on some weather stripping to the door? Or is that it, just the angle iron?

[@patrickdoyle6519]

Nevermind, rewarched.

[@projectdren806]

Do you think it would be possible to build something like this but have some sort of fold out hammock attachments on the top? That would be ideal for my needs :D

[@javilee98]

Definitely possible, would just have to design something and fabricate it.

[@kylefleming1144]

What kind of sheet metal did you end up using for the interior sides? I'm really liking the build!

[@javilee98]

It was just the other side of the sheet aluminum, it worked nicely.

[@aurtuswolf]

Hi i live in Miami, Fl. I like this trailer and would like to build something like it for my setup. That way i can still use my Ford Expedition and not have to tear down camp every time to go to the store or go explore the areas around camp grounds.

[@aurtuswolf]

Wouldn't know where to begin or have the know how of what to do any help would be helpful

[@javilee98]

I think first off is a plan of what you need/want, general size/shape etc. After that it's a lotttt of research on KZbin, forums, blogs to get other ideas on what you want to do. Determine if you can/want to build it yourself and understand it takes a lot of patience and time since it's the first time.

[@_onthemike_]

Is this sold? I’m in miami and looking to get first overland trailer. I really like this build.

[@javilee98]

It has been sold :/

[@eastcoastexplorers4x415]

why don't ypu see many side awnings on your trailers in America, here in Australia every trailer has a side or even a 180 awning to protect us from the weather, does it not rain in America?

[@javilee98]

It depends where you are in America, where I live it rains quite a bit but I keep the awning on my truck. I was going to add one to the trailer but I haven't gotten around to it.

[@ZAPP9]

Amazing build. Is there any chance you want to build me one for the right price?

[@javilee98]

Unfortunately what I'd charge to build another one is probably wayyy to unreasonable for someone to pay.

[@Patriot3791]

Maybe someone can answer this question. What’s the point of having off-road tires on a trailer anyway?

[@javilee98]

Off-road tires can be good if you're going over harsh terrain since they're more resistant to punctures. If going on uneven slippery trails the extra traction will help with keeping the trailer on the trail. If you get the wheel/tire combo to match your tow vehicle you can also use 1 spare across truck/trailer and also use the trailer wheels as spares for the truck if need be. Both of those are more of absolute 0.1% worst case though. On my new trailer build I'm using off road tires mainly because I found them cheap locally :P

[@t.e.h.7711]

How much ?

[@C-TOS]

Did you sold it?

[@javilee98]

Yep, hopefully making good memories for someone else!

[@patriotsleepercell4060]

I think your axle is the weak link!

[@javilee98]

It's a 2000lb axle from Northern Tool so I believe I should be well within spec, I've not weighed the trailer but I don't think I'm even breaking 1000lbs fully loaded!

[@jrambo7495]

Thumbs down for the use of the phrase "easy peasy."

[@dylanjohnson3286]

Do you have an instagram?

[@javilee98]

Yep, but I don't post much. instagram.com/javlee98?igshid=MzNlNGNkZWQ4Mg==

[@dylanjohnson3286]

@@javilee98oh ok, I was hoping to see some pictures of the trailer