My Shop Will NEVER Be The Same!

[@ericellis4103]

All I ask is, please as you grow and expand, don't become like some of the others - names I won't mention - and become so big your site becomes one of those that become more about bells and whistles instead of craft. Keep the little guy in mind. Now, I watch quite a few DIY channels and yours is hands down one of the most informative and entertaining sites around. And so many of the better ones are just like yours - down to earth, with some amusement and endless tips and hacks delivered in an easy-to-follow way.

[@Gazman299]

I agree. I can't stand those 'Woodworking journey' guru sounding twits. Just build some stuff, share tips, and throw in some laughs for good measure. I love this channel.

[@FlynndoggWoodwork]

Thanks so much Eric! I don't intend on changing any time soon. I'm learning all this stuff as I go, so I can't even fake being an expert on anything. Really appreciate the comment and thanks for watching!

[@ramosc3]

Nice job , especially with the way you explained your process. Just note that. Butcher block recommends you fish within 24 hour of opening package to avoid future twisting

[@FlynndoggWoodwork]

Oh man! Thank you so much for your kind words, and also the information on the finishing. I had no idea. It's sort of too late now, but I should get to finishing it in the next week or so. I'll have to remember that for the future. Thanks so much for sharing and watching ramosc3!

[@williamroozenboom3269]

Great work. I've actually used ratchet straps as "clamps" for large glue ups. Works in a pinch.

[@FlynndoggWoodwork]

Oh man! That would have been perfect for this application. Thank you so much for reminder. I have a bunch of them in the back of my truck and I need to bring them down to the shop so they can get used more often. Great suggestion and thanks for watching William!

[@Sly_Wolf_1]

Great idea 👍🏻

[@startmaking1]

They look great Bryan and a well explained voice over too. Thank you.

[@FlynndoggWoodwork]

Thanks so much Mark! Really appreciate it. I've been so busy this week I haven't had a chance to check out your latest! Looking forward to it!

[@peteg4526]

Great looking cabinets. My shop furniture has always been mobile. While they are functional they were all built around strength, speed of the build, and whatever scraps I had. I’ve never built anything as well designed as this. I’m looking forward to the door and drawer video that I hope is coming soon.

[@FlynndoggWoodwork]

Awesome, I was exactly the same way as you with the mobile benches. In fact the bench that these are replacing are on wheels! I found that that bench was staying in one place so I decided with this one to make them permanent. I also have that small desk in the middle so if I eventually want to turn this into a miter saw stand in the future I've got that option as well. Thanks so much for watching Pete!

[@patcross5799]

Happy Saturday, thanks for the video today.... I've been watching closely, I have a similar project coming up. Enjoy your long weekend.

[@FlynndoggWoodwork]

Awesome! Thanks so much Pat! You have a wonderful weekend as well!

[@afpitbull60]

Great job! The approach you took made it easy to follow along. You made it look easy. Keep up the awesomeness!

[@FlynndoggWoodwork]

Thanks so much AfPitbull! I appreciate it. I had fun doing this video. Always enjoy the builds a little more!

[@afpitbull60]

@@FlynndoggWoodwork I plan to do the same for my tuff shed. I just have to wait until I recover from rotator cuff surgery.

[@FlynndoggWoodwork]

@@afpitbull60 Oof! I hope you're back to 100% soon!

[@rayansandysteward7474]

Looks really good, very nice build!

[@FlynndoggWoodwork]

Thanks so much Rayansandysteward! Really appreciate it, have a great labor day!

[@thomasvispisiano4663]

I really enjoy your content!!! Thanks for sharing!

[@FlynndoggWoodwork]

Thanks so much Thomas! I appreciate that. I really appreciate you watching!

[@Gazman299]

The butcher block is perfect for your shop. It looks great, and can take a beating :-) Nice looking build. Take care.

[@FlynndoggWoodwork]

Really appreciate that Gazman! I thought so too! Thanks so much for watching as always, I really appreciate it!

[@rogerweaver7686]

I use different colored pencils to mark centers when drilling for dowels/dominoes, a lot less likely to get them confused.

[@FlynndoggWoodwork]

Oh what a great idea Roger! Thank you so much for sharing, I've not heard of this before and I love it. Thanks so much for watching!

[@Sly_Wolf_1]

Great job, love the use of the butcher block top, looks great. We always appreciate the work that goes in to your videos, aside from the project itself. I don't know why but I was trying to keep a mental log of all the different camera angles, camera location set ups for each tool or procedure used, along with the narration clips. It rally gives a sense of all the stop/start you are doing whilst actually trying to complete a project in a timely fashion. Then add in the editing time! Thank you for educating, inspiring and motivating many people. Also love the T shirt too😂 Best wishes to you and your family, see you on the next one.

[@FlynndoggWoodwork]

You are way too kind to me Sly Wolf. I really appreciate that. You are absolutely correct, it does take a lot of takes to make these videos. In fact this one had well over 1,000 video clips with all my mess ups etc. I really enjoy doing it though. I really like the way channels like foureyes etc do it and I'm trying to take lessons from channels like that. Thanks as always for your ever so kind words. Really really appreciate it!

[@HerselLawson]

Looking fantastic so far. Cant wait to see it complete.

[@FlynndoggWoodwork]

Thanks so much HershelLawson! I really appreciate that!

[@jimrosson6702]

Great job Bryan the cabinets are looking great. Can’t wait to see them finished. Hope you and your family have a great holiday weekend. Thanks for sharing

[@FlynndoggWoodwork]

THank you so much Jim! Really pleased with the results so far. I'm dreading doing the next video of drawers etc. :(. Have a great labor day as well!

[@jimrosson6702]

I’m sure it will be great as always looking forward to seeing it. I’m looking forward to having a place to finally start building a shop of my own as soon as we move and use your build videos to build my shop. Thanks Bryan

[@FlynndoggWoodwork]

@@jimrosson6702 I hope you are able to build your shop sooner than later! :). You'll do amazing I'm sure

[@danmac4132]

I'll be using this build for my new shop, Thanks!

[@FlynndoggWoodwork]

Oh my pleasure! Best of luck to you Danmac! Thanks so much for watching!

[@mikec2810]

The cabinets are looking good Bryan!

[@FlynndoggWoodwork]

Thanks so much Mike! I appreciate that and thanks for watching! :)

[@richpeggyfranks490]

Sup. Thx for a new look at your space. The butcher block tops come in an island size which make a good, solid and cost-effective workbench top.

[@FlynndoggWoodwork]

I totally agree! Thanks so much as always for watchign richpeggyfranks! Have a great weekend!

[@BrandonCabanillas]

I have been thinking about welding also.. this is awesome and the price you can not beat. Ty. Also, great video. Really appreciate it

[@FlynndoggWoodwork]

My pleasure Brandon, I've got a lot to learn on the welding. I think I need to find a good youtube beginner channel for welding. Anyone know one? THanks so much for watching! Really appreciate it!

[@joegutierrez4197]

Beautiful work Bryan! Blessings!!!

[@FlynndoggWoodwork]

Thanks so much Joe! Blessings to you as well!

[@JoeL-zx2tl]

Nice build. Great video. Thank you

[@FlynndoggWoodwork]

I appreciate that Joel! Thanks for watching!

[@michaelleas]

I love the idea of using 2x4's as the base. That can definitely save a lot of time, thank you! Do you mill them at all? Or just use them as they come with rounded edges and all?

[@FlynndoggWoodwork]

Great question Michael. I probably should have milled the 2x4s but I didn't. I did spend a heck of a lot of time at home depot sifting through the product to find the ones that were the straightest I could though. I knew that I'd be wrapping them so I wasn't as concerned about the looks of them. Luckily I got some pretty decent ones and everything was level right off the bat. Either that or they were exactly curved in the opposite direction of my floors. Hard to tell with Home Depot Lumber! :). Thanks for watching!

[@gteam53]

Excellent video. Thanks!

[@FlynndoggWoodwork]

Thanks so much gteam53! I appreciate you watching! :)

[@jeffgass89]

Nice job Bryan! Looks like these will be a great addition to your shop. Very informative video, with some awesome tips and tricks! Not in the market for a welder, but that compact size and portability looks handy.

[@FlynndoggWoodwork]

Thanks so much Jeff! Really appreciate that. I'm dreading making all the drawers, but I think it will be great to get all my stuff organized. Thanks for watching!

[@jeffgass89]

@@FlynndoggWoodwork I’m sure the drawers will turn out great. Really looks good so far. Are you using pocket holes or dove tails for the joinery?

[@FlynndoggWoodwork]

@@jeffgass89 I'm leaning towards pocket holes at this point. It's so much quicker and easier.

[@scaryfriend1]

Great project - looking forward to rest - but if the center is for a chop saw - i missed that shouldn't both sides be level across the entire spread ?

[@FlynndoggWoodwork]

Great question. The center is "flexible" right now. I'm planning on making it a small desk for now, but I wanted the ability to convert it down the road for a miter saw. The good news is that both sides are completely level, so will just need to adjust the middle cleats if I want to convert it. Thanks so much for watching scaryfriend1!

[@lespaulguitarmn1]

Love the Butcher block Idea over Formica tops. Always hate cutting down 4x8 sheets in my cramped shop for projects in winter/ also harder to get in big box these days too. Guessing that center spot is for the mini fridge under your peperoni and salami slicer! : ). Looks great nice design and build. Will you be adding an adjustable stop when you add the drawers and doors? Happy welding! So glad you getting to do a new shop a lot of us just dream about!

[@FlynndoggWoodwork]

Great questions Lespaulguitarman! What a great place for a mini fridge! :). I actually have an idea that if I don't like that spot for a desk, I made it that way so that I could potentially add a miter saw to the top and have a really big miter station. Not sure if that will happen eventually or not! I'm still in the planning process for the drawers and doors that I'll be adding. I have 10 drawer slides and tons of hinges.... I'm guessing I'll do 3 cabinets with 3 drawers and maybe the other 3 with cabinet doors. Thanks again for watching!

[@lespaulguitarmn1]

I'm so embarrassed I thought you were making a miter station! Can't wait for the next video. Will source the #1 video and get the old timer up to speed here....eventually!! Sorry I missed the first one Mr. Flyndogg! have a great 3 day weekend I hope!

[@FlynndoggWoodwork]

@@lespaulguitarmn1 Haha! No it get it, it totally looks like a miter station and as I was making I thought it would be a great way to have a desk that could ultmately become a miter station. If I do the miter station though I will absolutely try the stops in the the butcher block. Maybe with some tracks or some other new gadget that may come out at that time. :)

[@Damon_Barber]

Awesome job!! I was thinking caulk for the gap at the wall, but 1/4 round works. What finish are you planning to use for the tops and for the cabinets?

[@FlynndoggWoodwork]

Thanks so much Damon, I was toying with caulk as well, but I always seem to get separation when I use caulk. To be honest I haven't yet decided on the finish. I may do a slight stain on the butcher block depending on what I decide to do with the drawers etc. I used danish oil on the drill press stand that I did with bucher block and it's ok but not my favorite! Thanks as always for watching Damon!

[@Damon_Barber]

@@FlynndoggWoodwork caulk dries fairly hard and does not allow for movement. So silicone would actually be a better choice than caulk, to be more specific. Silicone is what is used to seal tile at kitchen countertops, shower pans and bath tubs. But the trim adds a degree of finish to your shop furniture that Travis at Shop Nation would likely approve of. #ShopGreatness #UpYours (shop level) 🤪

[@FlynndoggWoodwork]

@@Damon_Barber Excellent point. I haven't watched shop nation in quite some time! Thanks for the reminder to see what he's been up to lately. Having a youtube channel makes me want to do things to a higher standard than i might if no one else was watching I guess. I've found myself getting more and more detailed oriented the older I get!

[@jeffstanley4593]

Great build but you might want to remove the overhang in the middle. Also, I am sure the Amana countersink works great but Snappy makes one that works great as well and it is cheaper to change bit sizes. On the overhang, I would just shift the slabs over rather than cut them. That would make a longer than usual overhang on each end but unless it is in the way, what harm is that?

[@FlynndoggWoodwork]

You know that is a very valid point. I guess I was thinking originally I could clamp on that overhang, but it's not quite enough. Great idea on shifting it over that might give me at least enough to clamp on the other end. Great suggestion and thanks for watching. Really appreciate it!

[@thebrentfamily7602]

You do know they sell both maple and walnut butcher block countertops like that?

[@thebrentfamily7602]

Not that I'd spend extra for shop furniture, but you said you wanted hardwood.

[@FlynndoggWoodwork]

Oh yes, I thought about getting one of those, but thought it was a little bit of overkill for shop furniture. Thank you so much for watching thebrentfamily! Really appreciate it!

[@Ted_James]

Looooking gooood! Is that just over $300 per butcher block or just over $300 total?

[@FlynndoggWoodwork]

great question Ted, the $300 was for one butcher block. I actually have a short coming out in a week or so where I compare the cost of buying a piece of butcher block and making a peice. It's about 20% cheaper to buy it pre made. Kind of surprising. Maybe you can get birch cheaper somewhere near you though! Thanks so much for watching!

[@Ted_James]

@@FlynndoggWoodwork Right after hearing you mention the cost, I checked Home Depot's website and saw the prices. I thought maybe you had some top secret insider info on buying these things. It is a little odd about the lower price for pre-made. Then again, I'm sure that the factory can make a lot of things cheaper than you could make yourself. I do like the way it looks. I might have to replace the old Formica top on our island with a butcher block. Can't wait to see how your cabinets/desk come out.

[@FlynndoggWoodwork]

@@Ted_James Yeah, unfortunately it's still not cheap, even though it is a little cheaper. I do like the fact that I should be able to put anything I want on these countertops and they won't chip or create any major damage. Plus I can mount some tools on them as well. I intend on putting my lathe on it as well as my shaper workstation as well as hopefully a new vise!

[@Ted_James]

@@FlynndoggWoodwork It is shop furniture, but you've built it to last and to put up with a lot.

[@FlynndoggWoodwork]

@@Ted_James yessir! :)

[@themeat5053]

Dogg man, nice crotch shot at the very beginning. We didn't know that the channel was going in that direction. Some old cabinet makers would make the face frame before the cabinets and then the cabinets to the frames measurements. They'd tell you that it makes a little more room for adjustment. The cabinet screws are really meant to attach the cabinet to the wall as the washer head affords more surface area giving more support that a flat head or bugle headed screw. Did you level the cabinets? Sometimes, depending the how level the floor is, even though you've measured on the cabinet, it could be not on the bubble. Dogg man, with the way you throw your walnut around, think how sharp those toe kicks would have looked wrapped in that dark, rich wood. Be proud of those cabinets, you've done well so far. As the cabinet maker who taught me would say, "Wood working is all about smoke and mirrors;" hence, mouldings and wood filler are exactly the correct answer. Thumbs up brother 👍.

[@FlynndoggWoodwork]

Oh man, you don't know the 1/2 of it. I accidentily clicked on one of those half naked women woodworking videos on my personal youtube channel and I'm still getting recommendations from 1/2 naked women. Try explaining that to my wife! :). Thank you so much for your kind words. These are the only cabinets I've made other than the trash compactor replacment I did in the kitchen and I've really enjoyed the process. Takes me forever with filming but it's been a lot of fun. I did level out toe kicks and surprisingly the cabinets were dead level once I attached them. I think I got really lucky there. Didn't even need to place one shim. Thanks for the tips on the cabinet screws. I did not realize that and I will remember that next time. I still have to build the doors and drawers as well as the cabinets on top, I've inturruped this project htis week with my wife's desk build so it will probably be a couple of weeks until I can get back to these. I need to make these a priority though as I've got sh#t everywhere with old bench in the corner. Getting harder and harder to find things! Thanks as always for watching Meat!

[@themeat5053]

@@FlynndoggWoodwork Sounds like your overworked and underloved; but, buck up because you are doing good stuff. Hey you're from Indiana, how about making a Hooiser cabinet?

[@FlynndoggWoodwork]

@@themeat5053 That's not a bad idea. I've had a couple ideas I've been kicking around for a little bit of shop decor like that. I'm also a huge "old school" van halen fan so I've thought about doing the backdrop of the cabients in the famous red black and white patern that eddie had for his guitars. We will see though! :)

[@gregsavant9595]

Where did you get your butcher block?

[@FlynndoggWoodwork]

Great question Greg, I just got it at Home Depot. It's nothing special. Thanks so much for watching!

[@gregsavant9595]

@FlynndoggWoodwork at my home depot they are $400 a piece

[@FlynndoggWoodwork]

@@gregsavant9595 Damn! I edited a short today for a couple weeks from now and they have gone up in price here to $169. Wonder if we are looking at different pieces. mine is 6' X 25"" X1.5"

[@gregsavant9595]

@FlynndoggWoodwork they only had 4 foot here but the 6 foot were priced $650

[@FlynndoggWoodwork]

@@gregsavant9595 holy cow. That's too much! :(

[@josephconsuegra6420]

👍

[@FlynndoggWoodwork]

Thanks for watching Joseph!

[@smg51218]

Great video. Unfortunately the like button seems to have disappeared.

[@FlynndoggWoodwork]

Thanks so much smg! KZbin Probably did that on purpose for me! :). Thanks so much for watching!

[@robgolding8803]

It's just *drilling* not *pre-drilling' :p

[@FlynndoggWoodwork]

Haha! You know you have a valid point there! 😂

[@robgolding8803]

@@FlynndoggWoodwork because 'pre-drilling' is using an awl , but kudos on the cabinet look with that w/top.

[@FlynndoggWoodwork]

@@robgolding8803 I see! excellent point!

[@kenerickson4923]

Pin nails wouldn't need filler.

[@hansangb]

But it also wouldn't add too much holding power. And timbermate does work well. If it were long grain to long grain, glue would be more than enough (and pin nailer to act as clamps). But for end grain (even in ply) I would take the safer 18g brad or finish head screws.

[@FlynndoggWoodwork]

Oh great point. I also agree with hansangb, as I was really worried about the face from coming away from the cabinets, so I think that is why I chose the brad nails. Now that they have been in the shop for a couple of weeks and i've filled the holes, they seem to be holding up well so I'm happy with that. I saw I got an email from you. Haven't read it, I'm excited to see what trouble you've gotten into lately! :)

[@kenerickson4923]

@hansangb I use pin nailer for lots of projects. It's my method of clamping, and the glue adds strength. I have not used my pneumatic 18 Guage Brad nailer in years. I may be buying a battery power 18 gage nailer soon.

[@kenerickson4923]

@@FlynndoggWoodwork I probably used about 500 pin nails in the project in the email plus 24 hidden screws.

[@FlynndoggWoodwork]

@@kenerickson4923 Hey if it works, it works! :)

[@russmeier8269]

That welder looks dangerous. Please don’t try to weld in your workshop. Also be careful welding galvanized material.

[@FlynndoggWoodwork]

Thanks, I appreciate it