My Throw-Out Bearing Exploded On My Drift Car

Last week I test drove my car and things went south. I had to pull the transmission to find a nice surprise! Now I have one weekend to get my car ready for it's next drift event!
~Follow My Instagram~
/ its_black
Thanks for watching! Please Subscribe ITS FREE!
*Amazon Links to all my most used gear*
Video:
DJI Osmo Pocket: amzn.to/3jWYxc8
Osmo Wide Angle Lens: amzn.to/311mZQV
Osmo Scroll Wheel: amzn.to/2Xf0map
Osmo Suction Cup: amzn.to/3ggPWyE
Go Pro Hero 7 Black: amzn.to/2EwdsJP
Go Pro Hero 6 Silver: amzn.to/3fnwK13
Photos:
Nikon D750: amzn.to/3gfrtcR
Tamron 24-70mm F2.8: amzn.to/2Etz9dw
Nikon 85mm F1.8: amzn.to/3jSCBPn
Nikon 50mm F1.4: amzn.to/33bFdSn
Sigma 14mm 2.8: amzn.to/3hNKcfW
Garage and Tools:
Tire Loft: amzn.to/2PhnnVH
Auto-leveling Laser Level: amzn.to/3fhaBkS
4 in 1 Stud Finder: amzn.to/2Xffi8v
$89 Electric Ratchet: amzn.to/2CY0Yum
$29 Cordless Rotary Tool: amzn.to/2D7DVwZ

[@itsBlack]

I actually googled it. An E36 ZF transmission is 77lbs 😂

[@Super_Android]

Lmfaoo

[@juniorrat17]

Lmao I took out the same trans recently and I respect ur confidence pulling it out like that 😂😂😂 bro I thought that shit was gonna crush me i thought it was wayyy heavier 💀💀

[@aidenronquillo7302]

That black insolation material in the transmission tunnel is the bane of my existence.

[@justinglavin9484]

Perfect timing. I need to drop my transmission before an upcoming track day and I've been dreading it. Thanks for that motivation.

[@justinglavin9484]

BTW - should have used an OEM throw out bearing. Those FX bearings are ass, but you know that lol

[@adamaziz87]

Pulled the ZF out of my e36 on my back in my garage 3 times while I was troubleshooting issues on my manual swap...it's not a fun time, but the way you man handled that transmission by yourself was impressive

[@EricTheBuddha]

I am doing this over a dollar part, had me rolling

[@JorgeRodriguez-qs1wz]

Can't wait to see the 15 e36s keep up the great work!

[@LopacGaming]

Watching you put that transmission in was painful ! Glad you got it !

[@ZoneKei]

That rubbing totally explains the low-speed spins! I had to go E39 wheels with low offset and 195s to avoid rubbing inside and out after installing denofa's tierods. 205s still rubbed.

[@redjstc9123]

Maan...the struggle...I felt that

[@extremistindustries]

You the man bro. Really surprising how much you've learnt in such a short time

[@ronaldotrevinobasson5490]

Love your channel, if i was near i wudve loved to help you did a few clutches in my day on e36 and e30 its kinda fun and its a good idea to get a garage keep on growing man.

[@Andries..]

Thank you for the content 🙌🏿🙌🏿 From south africa 🇿🇦

[@BillyHarcrow]

recently discovered your channel and I'm lovin it my man

[@ShutUpAndDriveIt]

in the middle of dropping the trans to do TOB on my e36 and having to hulk it without a lift too. Sometimes it pays to be a thicc boi

[@notphew7281]

In the future Can I work at the shop 😂. I love working on my e36

[@lololololololololo66]

Lets goooo 🔥🔥

[@ekene1950]

Can you please do a vid re explaining your race ignition/push to start

[@lamonthardy6411]

Invest in some quick jacks!

[@itsBlack]

Yeah those are cool but I'll still be on my back

[@KerryDrift]

🙌🏽🙌🏽🙌🏽🙌🏽Keep up the good work bro

[@jaredsword4668]

gotta do the same thing this week

[@luluhus1]

Quick Jack's my guy

[@itsBlack]

Yeah those are cool but I'll still be on my back lol

[@Jessersadler]

I you're real about selling that clutch, I'm all about it *wrote before watching whole video

[@itsBlack]

Yeah sold it pretty quick. My friends clutch was slipping

[@uscp2]

So a throw out bearing and clutch can be a one man job... good to know.

[@Super_Android]

Strong n out of breath job, but seems so.

[@khalid749]

Let's help get this man a lift...

[@Unko_landon]

Let me get that clutch 💀

[@hatersgonnahateyo]

Bosozoku e36 incoming?

[@wagnerhenriquez4861]

A thousand likes if I could. Hope your channel grows. And yeah working on your back sucks.

[@phillipeggers4125]

Get a stainless steel pivot pin and a new throw out bearing input shaft sleeve that one is damaged pretty good and a rear main seal and clutch fork

[@itsBlack]

Next time. Not going back in there for a while. I got everything new for the turbo car but I had 2 days to make it to an event that was already payed for

[@phillipeggers4125]

Also quick tip for installing the transmission on the floor like you did having the bench press it take a piece of wood place it on the crank pulley and Jack left until it's tilted a little bit to give you a better angle to slide it in without without having to fight the trans tunnel

[@eriqrosado3337]

Don’t sell that clutch bro. It won’t hurt to have one back up.

[@itsBlack]

Too late lol

[@eriqrosado3337]

@@itsBlack yeah seen that at the end. 😕

[@jamesguirand8243]

I won't miss a video

[@itsBlack]

Love it!

[@thykingdomcome1]

would the segmented ceramic clutch be dd’ able and better for drifting? or would the organic work just fine too?

[@briankennedy6693]

Taking a break from struggling getting my exhaust off my e36... figured i would watch someone else struggle under their e36 to make me feel a little better about lyfe, things we do for obnoxious drift cars 🙄

[@juniorrat17]

What clutch kit is this lmkkk

[@jpatrick260]

Didn’t hit me until a while ago that you have 3-4 bmw’s

[@bm-garage]

How bad is the flywheel rattle?

[@itsBlack]

I'm so used to flywheel rattle that I probably haven't noticed. Turbo car has a lightweight flywheel and factory E9X M3s have rattle too

[@JorgeRodriguez-qs1wz]

16:01 is it just me or is that ratchet pretty bent? Looking like it's on its last leg

[@Camoflaugepencil]

Would y’all I sell the old clutch setup?