MY TOP 3 UPGRADES ON THE BASS TRACKER CLASSIC XL!!

[@stevesteve4350]

Great show. Really like any information on your boat. Getting the on board charger installed on Tuesday. I thought I had mine tricked out but dude that is a sweet ride. Thanks

[@BredForBass]

Thanks bud appreciate it! I’ll have more videos coming involving my boat soon.

[@bradhulburt9917]

Good stuff bro. Keep it coming

[@BredForBass]

Thanks bud will do!

[@josephrobertfilms7707]

Great video! Can you post the Amazon link to the rubber furniture edge guard? Thanks!

[@BredForBass]

Thanks and yes www.amazon.com/gp/aw/d/B01MQIEWCV?psc=1&ref=ppx_pop_mob_b_asin_title

[@josephrobertfilms7707]

@@BredForBass awesome thank you! About how much did you order, 40ft?

[@BredForBass]

@@josephrobertfilms7707 yes I ordered two of those 18’ roles.That covered my classic all the way around accept for the last 1 ft from motor on both sides.Start at the nose of boat use one roll per side

[@josephrobertfilms7707]

@@BredForBass awesome great info! Appreciate it!

[@BredForBass]

@@josephrobertfilms7707 no problem

[@jeffreyau1286]

Where did you get ur mount plate underneath ur terrova?

[@morbuenogroup3092]

All your mods are real clean and professional looking! If you were in Texas, I’d def contract you to add the decking to mine.

[@BredForBass]

Thanks buddy I appreciate it I try my best!

[@RCBassin]

Nice mods and great tips!

[@BredForBass]

Thanks buddy!

[@targetshot]

Wondering where you got the matching carpet. Trying to do the same. Can seem to find a colour name other than “grey”.

[@BredForBass]

Boatcarpetbuys.com it’s the 16oz color is midnight star

[@targetshot]

@@BredForBass awesome!!!! Now how much did you order? Thanks for your help!

[@BredForBass]

@@targetshot I ordered whatever the minimum amount was at the time that was enough with only a little bit of extra

[@DoubleTFishing]

Great video, thanks for sharing, I put my Terrova on 1st thing. The foot pedal is only about 1-1/2” high that works well when “beating the bank”

[@BredForBass]

Yes I agree I’m glad I didn’t cut the recess tray in now since the terrova pedal so low profile

[@taylorwhatley8061]

How’s you do the aluminum casting deck?

[@BredForBass]

I got some earlier videos on my channel showing how I did some of it.Let me know if you got any specific questions

[@Jay-mv5th]

Great video 👍

[@BredForBass]

Thanks buddy appreciate it!

[@bobwc629]

In addition to the onboard charger I also added a alternator charger for the batteries. Topping off the batteries while running the outboard. Nice setup!

[@danbarber67]

Does the alternator work good? I'm thinking of going to a 24V system from a 12V. I like the idea of keeping the batteries charged.

[@bobwc629]

@@danbarber67 I run two 12 Vs. I spend a lot of time on the trolling motor. I like the idea that when I'm burning gas going from spot to spot that some of that expense (gas) is going back into charging my batteries...starter first and when that tops off it switches over to the trolling battery. All I know is that I have enough power throughout the day. Coming back to the dock I plug in the onboard charger. I'm no expert but I feel I'm getting some benefit from this setup. It's putting some "juice" back into the system depending on how much you're running and gunning. As for products I have no recommendations. Hope this helps, sorry for being long winded.

[@BredForBass]

Thanks buddy! The alternator charger sounds like a good idea.

[@danbarber67]

@@bobwc629 Thanks for the reply. I will definitely consider it.

[@crankbait918]

Nice upgrades and you made them look professionally installed. BFB Family.

[@BredForBass]

Thanks bud appreciate it! I always try to make it look the best I can.

[@anthonygoodwin6971]

I seen you added lights I missed that video if you had one. Wanting to add some to my boat. I’ve looked at a bunch of different brands. If you don’t mind me asking what did you end up using

[@BredForBass]

I did not post a video of the lights I bought but will have a video soon with all my upgrades/modifications because there are a few things nobody has seen.The lights I got off Amazon I can’t seem to find the link though I tried looking .Easy to install I didn’t even hard wire them just plugged them into the 12v plug at console.

[@bobwc629]

@@BredForBass I want to do this as well. I would appreciate details and tips. Thanks.

[@Jonathan_Gantz1]

Great video👍 I'm going with the same trolling motor but the 24v 80lb first and have a helix 5 for the front for now

[@BredForBass]

Awesome! I strongly considered the 80lb but ultimately decided on the 55.I’m sure the 80 will be nice though

[@jameswright9647]

Do you have any issues operating the terrova in shallow water? I know a lot of people say cable steer trolling motors are the way to go when fishing shallow and that electric steer foot pedals have alot of lag.

[@BredForBass]

I have not had it much in shallow water yet as it’s still fairly new to me.I’ve heard the same thing though but it don’t feel like much of a lag to me.Like anything else your not used to probably need to just get used to it.

[@jameswright9647]

@@BredForBass I tend to agree with you. I went with a 55lb edge on my pro 170. I'm kinda kicking myself right now probably should have gone with the terrova or maxxum 55 instead. I would be extremely interested in what you think after you get out and fish shallow. Really enjoy your content!

[@BredForBass]

@@jameswright9647 thanks I’ll definitely give an update once I get to use it more unfortunately that won’t be for another two months as our lakes are frozen solid lol

[@FranklinHicks-qs4gs]

Why did you select the terrova? I see you added a plate for install ? Is there a motor that install with the original edge mounting holes ??

[@BredForBass]

I went with the terrova because of spot lock.I’m not sure if there is a trolling motor that lines up with the same holes or not.I put the plate there to give extra strength people have had issues with the front weld breaking when using the terrova.The way the terrova mounts so far up on the bow it puts a lot of pressure on that weld.I have videos showing how and why I put the plate there.