My treadmill keeps going to one side?? Treadmill Belt Centering (Matrix)

Here is a short easy video on how to move your running belt from one side back to the center.
Have any other questions or want to know more, leave a comment or visit: coloradocardio.com

[@nikkimunir]

Thanks for your help! This helped me troubleshoot a different treadmill. Didn’t realize I was adjusting the wrong side

[@coloradocardio]

Awesome, glade it helped

[@yolandatanner1509]

Thank you for sharing this video,I was getting aggravated but Ima try it again tomorrow.

[@coloradocardio]

You got this! Good luck

[@yolandatanner1509]

Thank you and I did it so thanks a bunch for sharing this video again 😉

[@arose3104]

Thank you for this! I had a different treadmill and spent two days trying to fix the belt. After watching this I fixed it under 10 minutes 😅 thanks!

[@coloradocardio]

Glad it helped!

[@ethanmiller5105]

Same here, we thought it would take hours to fix it😂. Thanks for the video

[@numafc]

Are you releasing the tension or tightening it?

[@savedbychrist23]

How do you fix the belt moving forward?

[@gildasp875]

Thanks 👍

[@coloradocardio]

Welcome 👍

[@monroe2245]

Wow that seemed like a lot of adjustment (turns) for that amount of movement. I'm new to this so not a criticism just an observation. The manual on mine (Spirit) says to quarter turn maybe twice, so half turn max on a belt that's all the way over to one side.

[@coloradocardio]

These belts were newly placed on the treadmill and hadn't been tightened to the spec before this.

[@namename3139]

yeah i fix the botom of the belt, its centered, but at the top of belt, on the left, its too xlose and rubbing against the smaller belt

[@coloradocardio]

Good sounds great.

[@mayramata872]

My belt is all the way to the left . What should I do

[@coloradocardio]

Here is a video I made for this: kzbin.info/www/bejne/Y4S8f6Gsa8ejY5o

[@megijamika]

It doesn’t work at all. Once I step on it it moves again. And when I tighten other side, it’s straight, but goes crooked once I step on it again.

[@coloradocardio]

It needs to be reset back in the middle and count the number of screws you do on eachside

[@megijamika]

Would be great, but it won't open up. The screws are so loose now, but wont come out. My treadmill is eqi smart walkingpad, and it's a lot different than treadmills and especially ones in america or any other country :(

[@patrickthomas8890]

I had the same problem and figured out the floor itself was slightly uneven…check for hyd that

[@valarmorghulis3773]

Been sitting here for hours and dont understand The tighter side is pulling

[@coloradocardio]

Loosen the tighter side, you can keep tightening one side or even both sides. You might just have to restart the process

[@valarmorghulis3773]

@@coloradocardio called the manufacturer and took an hour to figure it out. Had to remove pieces to completely start over but I figured it out and understand now Your video encouraged me to call for help lol

[@Chris-zp6eh]

Mine is centered perfect………until I start walking on it. Then it goes to the left ……???

[@coloradocardio]

You might be heavier on your left side, just saying. You can comp for this

[@tetsuth]

I had this same problem then I discovered that the floor wasn't level. I put a piece of plywood under the feet of the treadmill on lower side and now the belt stays centered.

[@nadiarivera3460]

So I need to tighten it up so it goes back to the middle?

[@coloradocardio]

Yes, if your belt is to the right then tighten the right side and it will move back and if it is too far on the left then tighten 1/4" each time don't over tighten