MY WELDING MACHINE BROKE DOWN

[@sasquachbigfoot9070]

I started as a helper in 1978 when I graduated from hs, broke out as a rig welder in 1985 and worked all over the country out of local 250 in los angeles. I ended my pipeliner career in 1995 due to a pretty bad on the job accident, I look back now with very very fond memories, but let me tell you my life didn’t really begin until after I got out of pipelining, my father started pipelining with a 1970 Ford pickup and a sa200 worked 35 years pipelining and passed away a multi-millionaire, my advice to all you guys is invest every penny you make don’t spend your money trying to out do every other yayhoo. Make the money and do your time it will end at some point.

[@LPJMagicmusic]

Respect to you and your father sir

[@brandonthornborough4433]

That's exactly how I feel when I run out of coffee. I done messed up. Great videos dude. Hope your staying busy.

[@chrisbustos7955]

That welder uses a sensor in the alternator if it grounds out it will throw the protection and kill the welder after 60sec ,oil , temp, and alternator are all on tied together for that engine protection

[@aramirez8427]

Damn Chris.......thanks for the tip.....

[@ElConquistador24]

i just ate a bag of white popcorn yesterday. Austin, you're like my new hero. cheers

[@modzelfamilyfarms8492]

I'm about 2 hours north of you . we have a shop up here that you could've gotten your parts at all they do is starters alternaters and ect . very well stocked. if you ever need something you can't find while your in Pennsylvania send me a message and I'll hook you up

[@arosswelding]

Dennis Modzel I sure appreciate it.

[@alaskanken2132]

I hope you get her fixed soon. New vs old that's a tough call. I would pray over it before pulling the trigger 👍

[@jamesmannette]

I hope you got her running again! Keep up the awesome content! Sending best wishes to you and Kayla from Maine!

[@CD38325]

I know this video is fairly old, but I have recently been having trouble with my Lincoln 300 breaking arc. At first I thought it was just me doing something wrong, but I’ve had several older more experienced welders use it and they have the same problem with it. One older gentleman referred me to a local Lincoln repair shop. Once I got in touch with them they told me they was going to steam wash my welder, generator and all. I was assured it wouldn’t mess it up. They should be finished with my welder this week so fingers crossed 🤞 I’m ready to get back on the line

[@jerryking1434]

Did steam.cleaming it fix it ...???

[@wadewittman8510]

Nice '60s model truck at 2:13! Sure don't make stuff like they used to. Hope you get it all fixed.

[@bartbley1269]

If you talked to a welder repair guy there, would it have been easier to bring your machine to him ? Parts and pieces?

[@arosswelding]

bart bley I def would have if I wouldn’t have figured it out. I always try to fix it myself for the simple fact of not being down any longer than I have to. Sometimes them shops have several people in front of you, so it might be a week or 4 before they even look at at.

[@Matt-mb5vr]

Beautiful machine! Hope your back on the ROW soon. Be safe

[@chriswilson3484]

Just bought a early 90s sa250 perkins diesel the other day. Thing is a champ.

[@beaugodwin7306]

Dont know if u got it fixed but take your fuel filter off n c if your getting fuel there if not, and idk if yours has it or not, but SOME have a little external fuel pump that feeds the injectors its below the fuel filter an it bolts to the side of the frame got a wire running to it, that pump may POSSIBLY be bad IF yours has it

[@benabusthethird9751]

I know this is an old video but I hope you didn't beat yourself up too much. Shit happens, unfortunately to the best of us. You did your best getting it repaired and that's all anyone can ask.

[@stevewarner8880]

Hang in there Austin.

[@chrisbow99]

Sounds to me like your floot bowl is just running empty. it will slowly fill up with gas when but cant keep up with the usage and it dies. Pretty common problem with any carburetor on a small engine. I know this was months ago but figured id throw some information about what it could be in case someone else is having the issue.

[@paulpaulie]

Like he said it’s diesel...sounds fuel related change fuel filter...idk if protection circuit as far as welder portion goes..some guys said that..w.o welder knowledge hard to say but I really doubt its gauges either way..

[@QuanTanRs]

You and Sam remind me of the Winchester brothers from Supernatural

[@Rhino5.0]

qt f they v reminds me of deja and koohlo

[@pipeline_hank5277]

When ever I go to the tractor supply near my house, they never have the things I need. Couldn't find any D rings, No mud flaps, no 1/4 npt air fittings, and they dont even have job box locks. I looked at every hardware store and big box store for master lock #5 one inch lock. Which is the lock needed for pretty much all job boxes. Bought my job box at home depot, they didnt have the right locks, went to another home depot no locks. Went to tractor supply, no locks. Went to lowes, no #5 master lock one inch. Holy shit people. If you sell job boxes, sell the fucking locks for them too. FUCK.

[@jacktheaviator4938]

I invested in a fitted cover for my big Lincoln. The old machines were all solid state and could live outside, but all of the electronics, and especially the gauges, seem to die on the new ones if they live outside. And buying the high dollar stainless model doesn't actually get a more weather resistant machine. It might not rust, but all of the electronics corrode and cause issues. The cover might be a pain in the ass, but downtime is expensive.

[@miguelsalinas009]

Any updates? Interested in how it turns out. Best of luck.

[@alfredflores1278]

I know that feeling Keep your head up bro

[@danielstarr636]

Awesome video!! Hey I liked your t shirts they look great 👍🏻

[@arosswelding]

Daniel Starr Thanks! Yes we are excited about the t-shirts.

[@justincampbell4114]

Try Starcher Welding Spencer, WV they keep lots of Lincoln parts ask for Clint.

[@arosswelding]

Justin Campbell Thanks for the suggestion

[@KawiManSam]

hey austin, would u suggest a used ranger 305 or go with a sae 200 or 300

[@lorendisney6573]

Austin if the machine dies slowly is probably a fuel problem if it quits it's electrical problem

[@user-mt9tn1ni4g]

At 40 minutes and 30 seconds you make a very good point and I've been there myself.. you have to plan ahead and do your research.. you buy a used machine whether it be gas or diesel.. you've got to know your machine.. with a used machine you're never going to get an owners manual.. or a specification manual.. with schematics specific replacement part numbers.. there are no guarantees with used equipment and you could be running around for a long time and out of work.. buy a new Miller welding machine. Make sure you have the full extended warranty.. and get it insured .. if your machine breaks down.. you get a temporary replacement while it's being fixed.. keep in touch with the manufacture and local authorized dealers and. Find out who your local authorized dealer uses for they're authorized repair shop...

[@dnvautoperformancewelding445]

check your low oil cutoff sensor, or is that gauge the sensor?

[@lindabingham394]

wheres your union mechanic 798er

[@bentodd3859]

Should just slide one of those pipe pros on there at 2:40 and call it done lol.

[@jonl40]

Hope you get up and running Austin just curious tho how many hours is on your machine? Take care

[@arosswelding]

bould_weldin 5000 + Thanks you too

[@MC-hs4mf]

@@arosswelding sled????

[@rileybracht7266]

Millers the way to go.

[@jimflynn5707]

fule filter?

[@haileybanks6813]

Hello, I'm interested in becoming a pipeline welder.. any advice?

[@DASmith-oj9nq]

How Kool is your frustration? Rate it 4 me.

[@masonmeek684]

Is it surging? My small engines sometimes do this if the gas tank vent is covered. It will start for a while then the gas can't go anywhere so it does till the pressure balences out

[@masonmeek684]

Welp never mind guess u found out ur problem lol.

[@tyharvey7636]

Myself and others I am sure are wondering what a “sled” is?

[@shaneserpa6453]

A welding machine thats not his thats either hooked up to a trailer, on a small trackhoe or something of the sorts. I dont know exactly what the sled he will be using is but it's an extra welding machine on something movable so you can have it out in the field/on the ROW

[@DASmith-oj9nq]

Where's Micheal and Jeremy Lewis at.

[@NoahStricklingSPWS]

So looking to get in pipeline work as a welder helper to work in to a welder position I have no idea what to do to start I'm ready to work hard and give my all dont know where to start any advise

[@arosswelding]

You are in the right place. I just started a basic helper duties series a couple weeks ago. These videos will help you when you actually get out in the field. We have several other videos you might find that should help give you some insight. Stay tuned. And first thing first is to just place yourself in the general welding construction world. Wether it’s pipeline or not.

[@NoahStricklingSPWS]

@@arosswelding ok awesome and thank you

[@lrlapua8035]

multimeter.....get one....check battery and alternator in about 30 seconds....

[@commercialelectrician133]

did you make a video when you fixed your machine

[@arosswelding]

No. But I put a new alternator on it and that fixed it.

[@SuperProfessional201]

If you have problems in the future I know couple welding supply stores (York, Pa) with-in 20 miles of the pipe line you are working on.

[@frederickbowes2926]

Steven Shaffer what’s the name of them? I go to York pretty often.

[@SuperProfessional201]

Earlbeck in Emigsville & Cunningham in Manchester. See alot of guys with pipeline rigs in and out of those places. I personally like Cunningham real nice people to talk to and answer questions, but I believe Earlbeck is a lincoln dealer. If they can't help, they will get you pointed in the right direction.

[@miguelulloa8358]

Best way to fix a Lincoln is getting a miller just playing only welder I ever used is a 220 multimatic

[@willgentry7205]

I've had new welders and old, the only thing is for sure is that they all brake down

[@arosswelding]

Will Gentry You got that right.

[@tylerhunt9885]

What job are you on? I’m green just went through orientation yesterday in canton. Monday will be my very first day on the row. Any suggestions for me?

[@arosswelding]

Tyler Hunt Head down, mouth closed and ears open. Be like a sponge. Ask questions. Learn something everyday. I’m on the Atlantic sunrise job in pa. I’m glad you are on a job. Wish you the best.

[@tylerhunt9885]

Austin Ross thanks man! Hope to see you on a job someday! Your videos helped me into making this step. So far I love it but I have a lot to learn that’s for sure!

[@user-mt9tn1ni4g]

You got some explaining to do!!#1 What type of company are you doing this welding for?? Union or open shop??#2. What is your hourly rate?? I saw in one of your previous videos where you said and I quote "" I've been doing this for 7 years;; and I've worked for 21 different companies...?? If you answer questions number one into which you probably won't I got a whole bunch more question for you

[@arosswelding]

Union

[@arosswelding]

54/hr on the arm 18 on the truck and 120 a day for per diem.

[@arosswelding]

That’s correct, give or take 21 dif companies.

[@arosswelding]

Yes, in 7 years. What other questions do you have?

[@kevinhornbuckle]

Today I fired up my Libby Welding 2-71 Detroit Diesel - hadn't run in 20 years. It's from the military; Viet Nam era.

[@arosswelding]

Kevin Hornbuckle That’s awesome

[@Graveltrucking]

Time for a new Miller Big Blue 👌

[@arosswelding]

Graveltrucking Haha maybe so

[@ivanadame1093]

What machine would you get if you where to get one ?

[@arosswelding]

Ivan Adame Not sure. Prob a cross country. I would even try a miller. Il try anything. I like welding with different machines and getting to know the differences in the way they all weld.

[@ZILAwelds]

Austin Ross i have 2 vantage 400.... that way i can never be down long .... always have to have a backup

[@doinjusfine1]

Lincoln or miller... isn't that THE question

[@chrisberseygay45]

Are those work pants FR ? If so what brand?

[@arosswelding]

Chris Berseygay Yes they are fr. the brand is Martin brothers. Here is a link to an apparel video on this channel. Cloths I use and have tried in the past. kzbin.info/www/bejne/i6DCoqKJesZ1oK8

[@chrisberseygay45]

Austin Ross thanks for the reply!!

[@TheXxchazzxx]

Did Sam pass his test

[@arosswelding]

Mario Herrera Yes he did

[@TheXxchazzxx]

That's awesome I like seeing people break out in the business work hard and stay humble sam.

[@logantoney4525]

Let’s do some videos of that truck more!

[@keithparady2594]

Ur truck looks naked with no welding machine on it lol

[@arosswelding]

Ronald Parady Yes I know it lol

[@jonnyb.5023]

@@arosswelding if you dont mind me asking.... How much did your whole setup cost, truck tools and all, so i know what im getting into?...

[@ifitaintrounditurnitdown1735]

They all do lol

[@billmcyrus]

At least the coffee and food problem is solvable with the Sheetz app.

[@arosswelding]

Bill Cyrus That’s roght

[@keithcronk7980]

WHY DIDN'T YOU CALL LINCOLN WELDER COMPANY ? OR AIR GAS ¿

[@raybosflorida4928]

why did u hv to take it off the truck

[@arosswelding]

Raybo sflorida Just easier to work on that way.

[@rigweldernomad932]

I wouldn't buy a new machine just yet. Just take care of what you got. Maintenance it properly. And keep it at it's top shape. Always have a back up machine.

[@rigweldernomad932]

By the way Austin ross I put in an application for the local Union 798. I hope I get a call soon.

[@jakewilliams4370]

Did you check the fuel lines?

[@stevesmith-wc2gb]

Miller all the way

[@codydayton3573]

Tractor supply dosent have shit that welders need that is odd

[@parkermckowen3781]

Cody Dayton they never have shit at least the one around here

[@pipeline_hank5277]

This is why fords and Miller’s were built.

[@louisnemick317]

Did you check the fuel system.

[@arosswelding]

Louis Nemick Yes.

[@0901sandman]

Sounds like fuel filter to me too.

[@fnhscar1727]

When you have time or laid off from work. Time for some maintenance..

[@jerryking1434]

Keep a multi meter on board...youll need it again... What would up being wrong with your welder .. ???

[@brodieberriochoa1775]

Miller 325 trailblazer homie

[@alainmiclette7634]

sounds like fuel delivery issue

[@fishjunkie7040]

So when your welder breaks down and you work on it at the yard, are you still being paid for being on the job site or are you out an early day?

[@fishjunkie7040]

If you wouldn’t care to make a video explaining what happens when your equipment fails on the right of way, weather your paid for remaining on the job site or an early quit, if you paid for a full day or till your equipment breaks, and weather or not the union will help pay to have your equipment repaired please, TIA!!!

[@darrenmccomic7325]

Austin do you like ice coffee

[@Ruben901]

Ive missed out on 2k at a construction site because my '68 lincoln redface kept overheating...oh well, at least i got paid for that one day lol

[@mikecubes1642]

thats why you leave the thermostat out

[@jamesdice1284]

Wen u hav a break down do you stop getting paid

[@arosswelding]

james dice Depends on the job. Some times you do have to take off to get it fixed. On this job they have us a sled to weld off of. So I didn’t miss any time.

[@mikecubes1642]

just think how bad a new machine with computers on it would be.

[@user-mt9tn1ni4g]

I'm at 2 minutes in.. and just a guess but yeah fuel filter.. I'll watch the rest of the video let's see what happens??

[@Mlgradar713]

Ol? Oil

[@robertedward7961]

Time for a miller

[@tturtle3032]

Dude call nApa they got em

[@twinx70]

My buddy has the pipe pro 400, that is a slick runnin machine, seeing more and more pipe pros out here in Colorado

[@arosswelding]

twinx70 Ya that’s what we are welding with on the sled out here. They’re not bad...

[@josecabrera5908]

Get a miller bro

[@mikecubes1642]

then he will know what major problems are when it wont even weld

[@jessicarose9724]

Get you a Miller my friend. You will be one happy camper!

[@chriswelds9889]

Jessica Rose hahahahaha

[@arosswelding]

Jessica Rose It’s crossed my mind lol

[@beaugodwin7306]

Jessica Rose thats what i have is a pipe pro 350 and i LOVE IT!! use to only ever run lincolns then bougt the 350 now i wouldnt trade it for the world!

[@yellowflame1000]

Why not just buy a new one you make extremely good money.

[@gregorioramos9414]

show some welding videos.

[@dirtychina5331]

I'm that way with marijuana cigarettes.

[@stevedepew3650]

Please wear your seatbelt...

[@dwighthickerson4106]

Time to upgrade . Get a Miller Pipe Pro like Jacob Shcofield!!

[@keithparady2594]

Fuel pump

[@kevinhornbuckle]

Or maybe air getting into a fitting or fuel line.

[@joshuajohnson8740]

Definitely fuel issue, be willing to bet it’s something very simple

[@davidrios9094]

If your getting an New one can I have that one since its not working. And I me free.jk Lol need you a coffee maker in that goat. Hope you get er running thats money being lose. Good luck

[@arosswelding]

David Rios Haha I almost gave it away real cheap that day. Luckily I was able to use the sled. So didn’t miss out on any work.

[@davidrios9094]

Austin Ross but like you said buying new is like replacing the old. Only with money saving on two parts. One saving thousands on something having new parts you know will last and 2 saving one your account lol.

[@MC-hs4mf]

@@arosswelding sled??

[@traceedmiston2532]

Get a new one!!!

[@brando8214]

Miller!!

[@arosswelding]

Brand O Haha never know... might be around the corner..

[@brando8214]

Austin Ross oh yeah I’m a miller man all the way. Thanks for the reply. Really liking your guys channel thanks for all the hard work

[@Liquid12322]

Miller sucks

[@mikecubes1642]

do you want him doing major repairs every week? i have seen millers puff smoke out the vents and stop working a few times. generators keep working.

[@michaelbrame8594]

I love me some coffee, but can't stand the Sheetz brand.

[@arosswelding]

Michael Brame Ya... I was in a pinch. Had to have a fix lol

[@chaseallen9707]

first

[@drummerguy676]

Maybe fuel filter

[@stoudt]

Miller!!!