MYLES 2002 CHEVY SUBURBAN GETS 2020 SILVERADO 4 PISTON BRAKE UPGRADE

Todd works on getting Myles' 2002 Chevy Suburban brakes upgraded to the 2020 Silverado 4 piston Brakes!
Thanks for watching THE COMBUSTION GUYS!
Check out Links!
campsite.bio/t...
Check out our Merch Shop!
thecombustiong...
Check out Our Instagram!
/ thecombustionguys
Support the Channel!
ko-fi.com/tcgs...
#thecombustionguys #2020silverado #brakeupgrade #carguys #youtubevideos #chevysuburban #autosandvehicles #gmcsierra2500 #thecombustionguysgarage

[@blosgmc9219]

Very cool! By any chance would you have part numbers for all these parts to do this upgrade?

[@TheBuelliganRides]

He gave you what year number the donor is. (Sorry if that sounded snarky.) But you can go on AutoZone or O'Reilly's. Calm and look it up and they'll have the oe part number on the page.

[@41johndeere]

My 2006 GMC Sierra these fit but with stock rim I had to add a 1- 1/2" wheel spacer to clear caliper I have 17 inch rims

[@orlandobennett9247]

How are they doing now?

[@Taz43055]

Name of the parts and Parts Number and possibly Links to them?

[@henrysmifth536]

1st time on your channel Great video I see you like super clean 👍👍👍

[@TheCombustionGuys]

Thanks! Yes, Superclean is a great product made by great people!

[@robertburton295]

Looks like a pretty sweet upgrade was you able to tell a difference

[@TheCombustionGuys]

Yes, Improved the initial bite and Improved the Braking Force a Lot!

[@threefoursix3940]

How many washers 2 or 1 on each bolt. Did two on each n rotor won’t even spin

[@timbowalk]

Use a flat head screw driver to push the pistons in when you’re changing brakes pry against the old pads do it 1 by 1 replace pads easily in 20 minutes

[@Mr572u]

Doesn’t the dust shield dragging on the rotor bother you?

[@PeterHatch-mx7zc]

Thks for the video im about to put 2020 4 piston calibers and rotors on my 1990 silverado !what are your rims off thks

[@dennislawson7306]

Your caliper paint job looks good for cast iron. What did you use?

[@Mr572u]

He said rustoleum

[@bobbyeslick8726]

You answered my question.. 07 to 13 sierra.. I'm trying to find calipers.. can you give the part number for that caliper. I can not find any

[@tjnoer3749]

Link's please!

[@jaybrown679]

nice video ....use the old pads to compress the pistons back in before removing them

[@slimsecret6522]

What size washer did you use? I didn't hear that part.

[@gzoman5]

1/2" ID washer will work, just needs to be ~.120"-.150". The floating pistons will center themselves.

[@edwardmikidadi5912]

Did you used 2 washers per bolt so 4 for each caliper?

[@edwardmikidadi5912]

Never mind I figured it out it is 2 washers per bolt

[@TheBuelliganRides]

Will my 17 inch snowflakes on my 03 avalanche clear all that? Or will I have to go up to 18s?

[@peterkelly4869]

Diameter is ok...problem is offset. The stock calipers only have pistons on one side...these calipers have pistons on both sides, so it's thick against the rim. Therefore, you don't need bigger wheels, you need spacers

[@Alan_5.3_Z71]

Do you use the 2020 brake rotors too or do you have to order rotors for them

[@toddfoxx9945]

Very cool upgrade !!

[@salgguzman05]

Just wondering what size was the rotors?

[@allanb3222]

13.5"

[@ichiara07]

does this setup work on 14-18 models too?

[@JavisZ28]

@TheCombustionGuys Hello. Will the 2023 front rotors and calipers work or do they have to be 2020?? I found a very good deal on 2023 front rotors and all calipers with only 15miles.. thanks

[@TheCombustionGuys]

As Far as we Know They Haven't Changed, So they Should Work!

[@davidleeshawnstansbury6204]

I have a 2000 Tahoe running 18 inch Dodge Ram rims....will this up grade work with 18 inch rims?

[@TheCombustionGuys]

Yes, these brakes came standard on 17s

[@davntelisha19]

What's the part number for the calibers

[@wesleytejeda]

What type of paint did you use ? Brake caliper Rust-Oleum red ?

[@TheCombustionGuys]

That's correct

[@faridgadimov5955]

Do you know if I can install this calipers on 2016 escalade?

[@TheCombustionGuys]

Simple answer is, it should work... Not totally sure if there's any difference on the caddy's vs chevy/GMCs... but it should be a compatible upgrade.

[@bkgeneral1]

@@TheCombustionGuys could I get away with using a 13 rotor instead of a 13.5 rotor? Alot of sites say 19-21 silverado are compatible with a 13 rotor 🤷🏾‍♂️

[@jemetricallen8825]

What about the 2017 Silverado

[@faridgadimov5955]

@@jemetricallen882514-18 silverado and 15-20 escalade have same brakes.

[@michaelsuarez720]

Great video! Do you know if I can do this to my 2008 Escalade as well?

[@TheCombustionGuys]

Yes, you should be able to upgrade on a 2008.

[@JoseLuis-fb2kw]

@@TheCombustionGuys can I do this to my 08 Tahoe front and rear or only front ?

[@bansheemopar]

Brembo Calipers are always Aluminum.

[@capman911]

With putting a bigger set of calipers on your vehicle do you see a need for a bigger or heavier duty master cylinder?

[@fartzinacan]

No, it's a direct swap so no other changes to the brake system needs to be made. M14 washers to center the calipers is the only addition to be made.

[@castleclubclipz]

@@fartzinacan Actually, a larger 1.31” vs the stock 1.125” or even 1.25” MC would help, especially given that you are adding 2 pistons up front (and stock has 2 piston rears vs single piston rears on the T1 Silvy). The 1.31” (aka 34mm) bore size out of the 2006 Escalade/Suburban will bolt right on.

[@fartzinacan]

@@castleclubclipz good to know, thank you. The OEM system has held up flawlessly though for the past 18 months or so I've had my 4 piston swap in. Have you added the larger master cylinder?

[@castleclubclipz]

@@fartzinacan Indeed, these will work with the stock 1.125” MC, but since the T1 (2019+) Silvy/Sierra use a larger 1.31” MC, upsizing the stock to correctly match really allows these calipers to perform as they should. And so yes, I did upsize the MC… I now have better modulation control with braking, less pedal travel/sinking, and alleviates the problem of not being able to lock up and activate ABS as well during a panic stop (which is the only drawback of these bigger calipers with undersized MC). Well, well worth it imo. Cherry on top for this upgrade. Just make sure to bleed the system well.

[@AnthonyGonzalez-lw1ek]

What would be the minimum size rim to make this upgrade?

[@davntelisha19]

You think those fit 2007 caddilac escalade awd

[@TheCombustionGuys]

As long as your running 17 inch rims yes!

[@randyd474]

Can this upgrade work on an 09?

[@DarrenWS6]

Yes.

[@jdavisfabrication2401]

Has anyone used 2020 rear brakes on a 03 1500

[@jhermaineharris2142]

By any chance can anyone let me know if you can also upgrade rears too or only front? I have an 02 Tahoe LT 4wd.

[@danieljones8587]

You can do the rears too. Get the 30mm rotors ànd make sure you get the larger caliper bracket and pads that go with the new calipers. You might have to do some spacing if you don't get all compatible parts but if all parts are compatible it's all direct bolt on. Sometimes the parts people don't get it right.

[@jhermaineharris2142]

@@danieljones8587 so the fronts and backs can both be upgraded from the same truck that’s 2020? If so I’m doing that.

[@danieljones8587]

@Jhermaine Harris Yes, both front and rear can be upgraded. If you use your original caliper holders, you will need .15" spacers which can be accomplished with 1/2" washers and new brake lines to fit the calipers. Forget what I said about 30mm rotors just go with rotors that fit the new calipers.

[@gzoman5]

The information below...or above, however this posts, is incorrect. The vehicles that came with the 4 piston calipers have an electric parking brake on a single piston caliper. The 99-19 trucks used a drum style parking brake therefore the offset of the caliper in relation to the mounting and rotor is going to be different. It's also not an upgrade, especially on the 99-06-ish trucks. They came with a two piston caliper in the back. 2WD only SUVs and vans up to 02-06 (I think...) came with a 1.25" thick rotor whereas 4wd had a .750" thick. Look for smooth calipers on the thicker rotor, ribbed on the thinner. 07+ all had a single piston caliper and 13" rotor in the back. Options for upgrade are from Baer who sells a bracket and 14" rotor kit.

[@keepitthoro6768]

Do those fit a 2015 escalade?

[@gzoman5]

Yes

[@adrenalinehigh2070]

8 minutes into it so far, and all I’ve seen is him talk and nothing has been removed yet. NEXT!!!! There’s many others who’ve done this already and their videos are 10 minutes long.

[@emmanuelvelazquez9640]

Too much blah blah blah, buddy we just want to see the before and after

[@danieljones8587]

For a few bucks, you can buy the correct caliper holders and eliminate the spacing. Also, the right caliper holders are more heavy-duty. This dude would make a minister sware like a sailor. 😮

[@threefoursix3940]

​@danieljones8587 you got the part number for that ?

[@emmanuelvelazquez9640]

@@threefoursix3940 I got the part number for the calipers

[@threefoursix3940]

​@emmanuelvelazquez9640 late reply, can u shoot me the part number thanks appreciate it 👍

[@slurge21]

Can this work with a 17 inch rim?

[@castleclubclipz]

100% for sure won’t work with 17” rims.

[@AnthonyGonzalez-lw1ek]

16” ? Og rims

[@davntelisha19]

And rotors

[@kerlioclassics6440]

your jounces are missing, you should replace them!

[@lloydchristmas8282]

880258 part number on those washers if my eyes are correct!