Myplasm Tutorial part 2 STV CNC Sparx 4800 Gear Reduction settings revamped. Please Subscribe

[@campbellcustom]

Another idea for a vid would be how to bring the book settings my plasm. Still checking out your vids and other resources. I appreciate you making these.

[@raymcar]

Michael Thanks again. I just used this video to set my parameters in My plasm. I am putting the finishing touches, drain fill plumbing, cable management, etc. on building my 4400 Modular. I went about solving the long work/ground cable a bit differently I ordered the Dinse 10 25 male and female connectors and will cut the work/ground cable to a length that works for the table and when I need to manual cut I can just plug it into the extra cable to regain the long length.

[@juggernautweldfab]

That's a great idea, hope all is well.

[@campbellcustom]

I appreciate you making these vids. I'm going thru the training vids and yours and making notes. Might end up hollering at ya thru fb if I get in a jam. Keep up the good work. Thanks.

[@dylanreed9188]

Hey Michael, My company recently bought the same model table as the one you have and its a used one. But i set it all up and have the motors and everything moving but when i go to cut my first practice part the software is giving me a no material detection error. I doubled checked my cables,ground to plasma box,height of torch and nothing works. The torch head will go down and touch the steel plate then go up a bit than it gives me the no material error. Wondering if you have any suggestions to help. Thanks

[@juggernautweldfab]

Go to your settings and make sure you have the floating head switch checked and not ohmic

[@curtishatfield9629]

Really good information as I'm in the process of setting up a new plasma table my self. What solution are you using in your water pan?

[@juggernautweldfab]

Sodium nitrite, physan, water, and tracer dye

[@matthiasl5253]

gerat Video got job

[@anthonyphillips5561]

Thank you!

[@AndrzejKutaszewsky]

What you mean by control box ?

[@MattyM110]

Maybe you will understand this,from the point the tip collides with metal on myplasm,then i zero it,,so if i do a standard 1.5mm high cut,it drags along the metal,it seems theres several mm of play from the time the tip hits the metal to the switch getting triggered,so when i lift the z axis so its not colliding on screen the tip is still touching the metal,would floating head switxh settings fix this

[@juggernautweldfab]

It possibly could, is your torch 7.5" from the bottom torch clamp mount to the tip of the torch?

[@MattyM110]

@@juggernautweldfab i feel like every machine has this and i just dont get it,it crashes on screen,i zero it,i have to lift it 0.120 from 0 it so its physically a hair just touching the metal,so for roughly 0.120 its not crashed on screen nomore but the tips still on the metal because if u look at the z trigger when u move it with your hand its has play until u hear the click I go down till crash,0 then i raise 0.120 and it gives me perfect accurate height,a 1.5 cut is truly 1.5 doing that

[@betterbuilt1114]

What fluid do you use in your table?

[@juggernautweldfab]

Water, sodium NITRITE (not nitrate), anti algae for fish ponds and tracer die.

[@Fonseeker]

@JuggernautWelfFab Would these settings suite the Pro 4 version to this table?

[@juggernautweldfab]

yes they will

[@matthewwiltshire6263]

What’s the rubber boot on your pencil or we’re can I get one ? Thanks

[@Windburned]

I’m wondering the same

[@juggernautweldfab]

it's just a silicone kitchen funnel

[@birdsiflight1091]

Can i buy a copy of your google drive . I have a home made table with the controller

[@juggernautweldfab]

I apologize I can't do that per STVCNC

[@erkamotorpompaerkan2894]

Hello