The RV Propane Regulator Review -- My RV Works

Support us on Patreon: / myrvworks
Tools & Parts - myrvworksstore.square.site/
My RV Works, Inc. main site - myrvworks.com
RV Service Manuals - myrvworks.com/manuals
Don’t forget to like 👍, subscribe, and hit the notification bell 🔔 so you don’t miss a video!
Looking for our LP Tap Jig Tool?
Looking for our other RV Tech Tools?
** Click the “Tools & Parts” link (shown above) and go to our store! **
============================================================
My RV Works, Inc., Certified RV Technician, Darren Koepp, discusses Liquid Propane Regulators for RV’s and provides information about the different parts and components that are involved with the successful operation of Propane Regulators that are used on RV’s.
Darren goes over:
- Single Stage Regulators
- Two-Stage Regulators
- Auto-Changeover Switches
- Pigtail Hoses (and what’s inside the hoses)
- Regulator Vents (and keeping them clean)
- Oil in your Regulators
- Protective covers for Regulators
- Regulator Vent Orientation
- The NFPA 1192 Manual
Link to the NFPA 1192 Manual:
www.nfpa.org/codes-and-standa...
===========================================================
Video Mentioned In This Video:
“My RV Works - LP Regulator Discussion and Regulator Installation”
• LP Regulator Discussio...
My
===========================================================
New videos every Friday! And bonus videos here and there!
If you are in need of RV Repairs in the Olympic Peninsula area of Washington state, submit a service request on our website at myrvworks.com today!

[@montanaboy3777]

I love the fact that with this propane subject - you take the time to repeat issues and do's & Don'ts with respects myths and the over all workings of the regulators. I appreciate you taking the time too DRILL IT in our heads as to what and how the regulators really work!! No doubt you are saving people a lot of trouble...damage & most likely lives!! Thank you for all the work you put into this...greatly appreciated!!

[@russellhancock9765]

I can't walk very good anymore, but I am sure that this can help a lot of people.

[@daviscrt]

Just finished my level 1 course on propane. Great informational video. Thanks Don

[@lonimarrocco3278]

This was so helpful, took notes , and learned about the regulator being a vital part of the propane system. I know nothing about an RV but hoping to learn so much more.

[@stnkyp8]

Excellent video with a wealth of information. Thank you.

[@lonimarrocco3278]

Repetition is necessary for all of us "Baby Boomers" who have to take notes so please continue stressing certain important content in your classes sir. You do a great job explaining everything ! 😊

[@patrickstiltner1207]

Awesome video as always Darren! 👌

[@douggheen1653]

Thank for this video. I was able to determine I need a new regulator due to gas escaping from the vent port. I really appreciate you sharing your knowledge.

[@henrymorgan3982]

Great video! I learned something today! Thank you!

[@larrydeforrest5744]

Good info, Thanks Darren.

[@Eralston814]

Outstanding explanation…Thank you!

[@berlinjackson1847]

Great video on rv propane regulators. Thanks

[@renemarcoux1333]

Vraiment intéressant et tellement bien expliqué!

[@oysterjohn5669]

Thanks. I learned a bunch about regulators and hoses.

[@timf6916]

Good information

[@thomasfleming2593]

Thank You for the free refresher course.

[@MyRVWorks]

Our pleasure!

[@jonrico7937]

Hello Darren, you mentioned you took Organic Chemistry. I was a Biology major and that course was no joke as half the class failed. The most difficult two couses in the program

[@verncommet1798]

Excellent video again, I’m restoring a 71 chinook replaced the h20 heater and fridge should I replace the furnace? For safety thanks again

[@multifamily4059]

great video

[@dakotafisher6874]

Hi, Thank you for such expert advise. I am still having trouble on my ice fishing house. (The season is almost upon us!) The fish house has an Atwood stove/oven and the burners are "pulsing" when I light it. Last winter the flame completely shut off and I couldn't light the range until i warmed up the tanks and regulator. Prior to the ice fishing season, I had the pigtails disconnected for most of the summer. Could moisture/humidity gotten into the regulator and iced up when the temps dropped? Is it an oil issue? I have replace the tanks in the mean time and even in the summer weather, the flame on the range pulses. You had mentioned that the lines need to be "blown" out. How do I do that. Thank you so much for all your help, I need to be able to make coffee this winter you know!! Keith

[@chrisssmallengines7163]

Great video , Is there any conditions where the regulator could freeze even though regulator is adjusted and mounted properly . Is there a temperature that you should stop using propane heat because of low temperature .

[@ogleo8775]

The #41 hole for the 50% load test, does that correspond to a hole made with a #41 drill bit. I know this may be obvious to some but I'd rather confirm this with you. Thank you again.

[@stuartstuart866]

What propane hoses are impervious to drying out?

[@artpureblood3946]

I did a newbie mustake turned my regulater knob the wrong way kinda broke the plastic piece 😅 but seems to still work so i guess im fine its the Type 924n

[@robbypro3370]

I was a mechanical and electrical Engineer for a medical and aerospace silicone manufacturer so I like your videos to see if you know what your talking about. You explain everything very well. Getting too technical will lose viewers.

[@aaronward2952]

This was an awesome video. I’ve subscribed to your Patreon for about a year now. I am wondering though if there is more to the oil in the lines than just the pigtail leaching oil into the system. I’ve had a couple of customers with a decent amount of oil that filled the regulator and was up the line. It still definitely could have just been the leaching, but I’ve read in a few places that tanks being overfilled is the lead cause of oil in the lines. I’ve also heard that bad batches of propane where too much additive for smell was added can cause oil build up. I’m curious what your thoughts are?

[@michaela.aguilar2921]

Great info. A class on all propane related, how exciting. I recently was researching the difference between single and 2 stage regulators. I lost the propane hose with regulator to my Champion 4500 watt generator, which I haven’t used yet. Unsure of what type of regulator and hose size would be required? Please help!

[@tonyastokley5165]

I’d go with a two stage regular so you are sure that you have enough juice so to speak to fuel up everything and to be able to hold up to that size of a generator as well ! Okay ! Ty hon hope that helps

[@michaela.aguilar2921]

@@tonyastokley5165 Thank you!

[@josephchonka1594]

My local shop replaced my lp regulator but it makes noise. kind of a chirping or dinging noise. only when i am operating an appliance or the fridge is working. could it be it just needs adjusting or does it need replacing?

[@rhvreramon]

Is there still a need for rv techs.

[@riseup3117]

demand is huge for mobile techs. dealerships take months to fix simple issues that we has mobile techs get done in hours

[@JoseOrtiz-zb7gq]

Awesome

[@doug1olson]

I’ve noticed that when my travel trailer is using propane that there is a slight high pitch sound coming from the propane tanks/regulator system. Is that normal? Thx.

[@collettesnoozy7950]

The regulator we bought for our pop up doesn’t have a vent. We do have a heater, hot water tank and stove. We also have a stove connection on the outside. Two size hoses and my husband had to get brass fittings to adapt that. We’re going to use it for the first time next month. 1993 Fleetwood. What are your thoughts?

[@jshawley824]

I changed my regulator and it makes weird noise when a appliance is running?

[@dpatt007able]

Good evening I have a question I think you can help me with. I have a westinghouse wgen 12000DF generator and it already has a pressure regulator on it from the factory. I purchased a camco Propane Double stage auto-changeover regulator thinking i could connect it to my 2 60 pound tanks. It will not run on propane because its not getting enough propane. Can the pressure be raised on the changeover regular to allow more propane to flow through the second regulator normally to run.

[@rachaelb9164]

I have an older (30 years) class c and it has no cover over the regulator. I’m getting ready to replace it but do they sell the covers somewhere or can I just use a plastic box or something to cover it? Also, my tank reads full but there’s nothing in it. Of course it ran out halfway through a meal. They couldn’t fill the tank because it read full. Do you think it’s a float problem or a gauge/sender problem? The whole thing is annoying. I haven’t been able to use my propane system for over a year now. They put a domestic fridge in it so I don’t need propane for that at least but I’m looking to boondock next month and it’s going to be chilly without a furnace running.

[@blj859]

Your a great teacher… would like to hear any insights regarding the addition of “Gas Stop”, on regulators. Thanks !

[@sr71ramjet44]

I would have thought someone would have asked about the effect of traveling/staying at altitudes above a mile. Is it presumed the diaphragm adjusts to varying heights?

[@katvazquez1]

Would love that class. When is it coming out?

[@MyRVWorks]

We're putting together the course content now.

[@johnr5545]

Thanks god bless

[@heavyjunk77]

Is the vent supposed to be down whether it is a vertical or horizontal regulator?

[@ogleo8775]

What brand/model of Manometer do you use? Thank you.

[@MyRVWorks]

You can find parts and tools we like on our website at myrvworks.com/myrvworks-store/. You can find a manometer in this list: myrvworks.com/resources/darrens-tool-list/#testequip

[@tombryan5653]

I have use a tank with out a regulator use on a Buren for grill

[@FiveGunsWest]

My old flat in San Francisco was gas lighting.

[@ObamaoZedong]

Link to course?

[@chuckmac6541]

How often should you change your regulator

[@tonyastokley5165]

They say a two stage I know is every ten to fifteen yrs is recommended by the companies

[@chouck0101]

Never mind he examined I need a pressure gauge to adjust it.

[@ghorn3136]

Really LIKE your videos…especially how you usually get right-to-the-point…..but you dragged this one out a bit (repetitive) on venting. I’d suggest a bit more expeditious rate of delivering the info. But THANKS.

[@tombryan5653]

I'm wondering if it is dangerous

[@chouck0101]

My dual auto changeover regulator stopped working. Replaced it, but I would like to fix the broken one. Who knows what breaks internally and how to fix them. Took it completely apart and everything looks fine and operated fine. It’s all cleaned out but does not work. Any suggestions?

[@MrONHcP9]

Great information but if I can make a suggestion, I wish the author would cut down on repetition... my 2 cents to help improve the videos.

[@TraconWizard]

I think that's just Darren's style & manner. Usually it's to emphasize an important point. Sometimes it's funny. he's like watching some of my teachers in college.

[@jamesalles139]

please be careful of the abbreviated (short-cut) units of measurement in a tutorial wow psi == pounds‐force per square inch unit of measurement. 1 psi = 16 ozf/in^2 (ounces-force per square-inch) 6 ozf/in^2 = *0.375 psi* pick one. 6 ozf/in^2 = 10.38 "wc Your temperature may vary!

[@ewicky]

10.38" WC is darn close to the 11" WC rating of appliances. It would technically be 6.36 ozf/in2. Which, once rounded, is 6. The PSI ratings that he focused on in the video were tank pressure and an intermediary 10 PSI between the primary and secondary regulators. Since they are part of the same assembly, the 10 PSI is not accessible to the user. Translating it to different units is not relevant and your bolded "0.375 psi" is pointless. Why ask him to "pick one"? The unit of measure changes, depending on the magnitude of the pressure and the application. This is fine and relevant, since tanks, pigtail hoses, fittings, and inputs are specified in PSI, but appliance nameplates and burners are specified in inches-WC. Regulators do a magnitude conversion, in this case, resulting in a change in units. A baker may pay their water bill in centi-cubic-feet, but they measure that very same water in cups or even fl oz. The facet is "a regulator" in the analogy. This isn't rocket science. Sure, a chemist would be annoyed with units change. But a good instructor like the gentleman in the video keeps things relevant to his students by using industry terms. The number of times I've heard BTU's misused is insane. Even on official manufacturer spec sheets. But guess what? We all know they mean "BTU/hr" so it's fine.

[@jamesalles139]

@@ewicky Thanks for the discussion - _that_ is my point. I agree on the BTU unit misuse as well - it made me pause looking at ratings of regulators, as I needed a higher flow rate for a medium size portable generator. The regulator I got my hands on states "140,000 BTU capacity" - huh? that's it? 140k and it shuts down? So many safety mechanisms built-in, it is hard to get any work done!

[@ewicky]

why it kills us... HAH HAH

[@michaelbutler8999]

Bbp

[@scottwall4669]

You said OK 116 times. OK?

[@MyRVWorks]

Oh shoot, I missed my mark. We were shooting for no less than 120. I'll work harder to meet my quota. I know we can count on you to keep the counting accurate. Thanks for performing that task for us it means a lot. I know the channel will be much better knowing that there's people like you out there counting for us. Keep up the great work!

[@scottwall4669]

ok got it, you fellers are simply ok. ok? And a reference from Debs RV is OK because she is simply an OK dream devine!!@@MyRVWorks