These PS5 Accessories & Faceplates Are Getting Creative.. And Underwhelming

[@dis6wood]

The ring lighting actually looks pretty good with solid plates

[@graphicsgod]

I also love the ring light on the solid plates!! Sold!! Thanks for the heads up. 👍👍😍😍

[@anubrakahn2970]

I saw that and thought it looked dumb AF. But then it grew on me and I think I might actually like it now 🤷‍♂️

[@vintendio]

@@anubrakahn2970 what a useless comment

[@Themooseknuckle]

@@vintendio ironic.

[@anubrakahn2970]

@@Themooseknuckle was thinking the same thing 😂

[@phantom3827]

The fan LED showing through the plates, looks like a loading screen when it’s animated. A contrast to the console loading so fast lol.

[@madarasoun3018]

For people who miss the loading screen 😂

[@MellowUzi]

Ngl I think it looks nice

[@rebels_finest7436]

@@MellowUzi right it wasn't the worst... also the fact you can change brightness it might not even bother

[@McKuc]

kzbin.info4-SrP-_awnQ?feature=share

[@Tuntira]

LED Ring + the Frosted plates could look SIIIICK! Make it happen Ryan!

[@unknown........]

the gold looks like a old white console that color faded out for all the grime through out the years

[@CraigSteelyard]

My old Super Nintendo console, looked like that

[@anubrakahn2970]

@@CraigSteelyard Yes, the aged Super NES yellow/brown. That discoloration is actually created from a fire-retardant chemical that was in the plastic of the Super NES. Doesn't age well and very hard to clean up.

[@AnthonyDunlap]

I was coming here to say the same thing haha

[@McKuc]

I used LED-strips that are really dense and made holes in the Plates to get better cooling too. (150LEDs/50cm/ WS2812C-2020/4mm)

[@yam7624]

I would love to see the ring used with transparent-frosted side panels so the individual LEDs weren't so obvious and the light could be blurred through the whole panel.

[@VEE0034]

Yam Hi Yam

[@crackinlackin9105]

I agree with you!

[@McKuc]

I used LED-strips that are really dense and made holes in the Plates to get better cooling too. (150LEDs/50cm/ WS2812C-2020/4mm)

[@l4ndst4nder]

I think it would be difficult. The ring of LEDs were visible through the solid color replacement panels. I think there needs to be an additional defuser in addition to a frosted side panel.

[@adriangavida6617]

That would look sick

[@D71219ONE]

The gold plates are just stock white plates that have been in a smoker’s house for 5 years.

[@jonathanwessner3456]

or the old NES plastic after 5 years

[@twichy12295]

I can smell this comment

[@rfh9560]

@@jonathanwessner3456 5 years in the sun, my head old SNES was 15 years old when I sold it and in mint condition, because my house was always dark, it’s the same with the NES

[@RBRT02]

PlayStation Labo

[@Devious-oh7tc]

Day 27 of asking mystic for a video game tour video 🤘🎮

[@NefHack]

I'm definitely going to get the ring light

[@charlietroop]

Same

[@ScarletGaming95]

Same here

[@Ste2]

Same

[@Xemnas283]

Got it ordered and coming in the mail today. Looks super sick

[@Ste2]

@@Xemnas283 where did you order it from?

[@pepelaugh6404]

To be honest the “gold” one actually looks like cardboard so in a way it actually creates a pretty unique style.

[@josephcasais2463]

I liked that one

[@MyManJFKTV]

I thought the same exact thing and liked it for that reason.

[@HazmatPyro]

It looks like Noctua's pc case fans

[@Faisalthefist]

Fr tho

[@SICresinwrks]

I thought it was the cardboard when he opened the box

[@BiggHead_T]

I like the LED lights shining through the solid plates. That’s dope as hell

[@ericalderson8702]

The “Gold” plates remind me of the SNES, after the plastic yellows over time. 😄

[@Frank7G]

That color reminds me of the gold N64 controller

[@li_B4shar_il]

14:31 this just gave me PS2 XMB flashbacks

[@chiefdabwinning]

looks kinda sick 🔥🔥⭕️

[@Neopumper666]

Xmb was released until the PSX/psp

[@Neopumper666]

@HoloKola that would make sense

[@TheGodJames]

I just ordered my black faceplate and I can’t wait to equip it on my PlayStation 5 but man! I’m glad people are doing Sony’s job at providing us with customizing

[@pepelaugh6404]

Back when the 360 used to make custom faceplates and crazy custom consoles was so awesome. It’s a shame Sony never really gets into the customisation as much as the competition does.

[@Xemnas283]

@@pepelaugh6404 I mean its a matter of time at this point. I can see them uploading a video on official custom plates end of the year but if they don’t then they’re missing out on a huge opportunity. I just hope we don’t get plain full colors but actually see designs on the plates

[@liammchugh9439]

What'll you do with the old faceplates? The ones that came with your PlayStation 5

[@iHaveTheDocuments]

There's a reason we all must admit the well known objective fact that Sony is anti consumer and does not care

[@TheGodJames]

@@liammchugh9439 Probably leave them to the side because their official faceplates by Sony so no need to throw them out.

[@MarcusG2G]

I think you’d sold me on the clear plates and Led lights. I have the dbrand dark plates and the original white too.

[@waferboy2k7]

6:14 PS5 Smokers Edition

[@anubrakahn2970]

Lol yeah the PS5 from 1975

[@_Shinasu]

I think getting a plate that has a clear circle for the fans but coloured everywhere else. The led circles would be pretty nice

[@li_B4shar_il]

How to turn your PS5 into a PC tutorial

[@Gac3la]

My man Mystic, always with the quality content. I'm interested in the LED ring and rainbow decal!

[@viniciusribeiro7279]

15:20 holy hell, if the plates were matte black it would look insane

[@luuketaylor]

Found MKBHD.

[@EnriqueCanoYT]

I would love some “RBG” lighting for my nonexistent PS5 🤣🔥

[@MetaSynForYourSoul]

15:45 At last my dream of a Sith console shall be realized!

[@steveminla]

If you want to block the lights form leaking through the after market plates, you could try to apply some "Aluminum Tape/Aluminum Foil Tape" to the inside as a light block. It will also help to reflect the lights more as well.

[@TheViper4Life]

Damn, I love the clear plates! I've always loved transparent console stuff. I'm waiting until we get a transparent DualSense....I've had one for every PlayStation, so definitely want to keep that going. I really wish Sony would get on to selling custom plates themselves...there's a definite market for it, Sony going with White on the PS5 has really created interest for people to want to make it literally any other color. Third party just never has the PS logo, or the tiny Triangle, Circle, X, Square design that's become synonymous with the PS5 now. It's the big reason I refuse to pay the prices for them...I have a thing with it not feeling official. Like it doesn't matter in the long run...but I'll always know.

[@genefactor007]

I completely get you. I finally purchased the D-Brand Dark Plates but for the longest time I refused to do so due to the lack of the PS emblem. I really hope Sony would produce official plates but I have this sinking feeling they won't. At most I see Sony doing a black PS5 but no separate plates. I do hope I'm wrong. I remember the plates they did for the original PS4. They only did two plates.. TWO! The PS4 was out for some time but they only gave us two plates. (sigh) Fingers crossed they make official plates.

[@Haktuar]

@@genefactor007 Looks like you're in luck - Sony just announced official plates, and in a bunch of colors too. Red, black, blue, purple, and pink. I picked up some third party black ones myself as I felt the official ones are far too expensive ($55!) for two hunks of plastic.

[@genefactor007]

@@Haktuar Hey, Heartsbane! You know I was really pumped when I saw Sony finally released the official ones. I did pre-order the midnight black in spite of having a pair of D-Brand Dark Plates (1.0) on my PS5. I'm also considering the red one as well. :)

[@Haktuar]

@@genefactor007 how are the D Brand Darkplates? I picked up some pretty good third party ones off Amazon as I didn't wanna pay a huge amount but the Darkplates seem like they're the best quality.

[@genefactor007]

@@Haktuar The quality are insane! So, so good. Very thick. I'd go so far as to say the quality is on par if not better than the official plates. No seams or anything like that. I do like them. I'm just getting the Sony plates because I wanted the PS cutout; I wanted the more 'official' look.

[@mronissopwnage]

Oh the clear plates look absolutely amazing. Now Sony please do the transparent controller because I’m not taking one apart. No way.

[@TFconfused]

I've had the DBrand dark plates for months and love em. Those clear plates might be really good for people to paint and customize them themselves. Might consider that myself

[@HonorarySaiyan]

I love the design of the PS5. Looks almost alien. The color is perfect. Every other color kinda ruins it for me, but I still appreciate the fact that they gave us the option, whether intentional or not.

[@genefactor007]

Hey Ryan! I think it's so cool of you to take the time to switch out all of those plates for us. It's nice getting a visual of the many different colors out there. Question, do you plan to get the D-Brand Dark Plates? I finally broke down and purchased a set and await their arrival. From what I understand they are made very well and even weighs a bit more than the official plates. I plan to use those until (hopefully) Sony releases some official plates. Oh and of the ones shown in this vid, I think the clear is my favorite. I personally wouldn't display my PS5 that way but it looked pretty cool.

[@manuelsanchez5028]

It would be so much better if the PS5 light changed colors. Would be so much better to customize and match with the faceplates. Maybe even similar to the PS3 xmb colors

[@ErrkNjerk]

And it would be so easy for Sony to add that customization

[@Mirra2003-f9s]

I think HW wise it can change since it already can make itself blue,white,orange an red if it overheats.It mostly depends on Sony to let you change it in software

[@BoSaGuy]

2:03 Yes, that is quite indeed a very nice piece of RBG lighting.

[@realghostxd]

Lol RBG, give him a break XD

[@TomDobo1992]

I heard that too haha

[@UssyMustyYS]

The ring led with the white plate is very cool.

[@rrwholloway]

Black plates with a wood skin looks awesome and it just blends into my living room.

[@Kappachino1911]

Not a fan of the clear case. Would look better if it were frosted honestly. Diffuses light better and still hides the internal details. Love the right LED though mosdef!

[@enchanted469]

The clear faceplate with the led lights gives off that 90s clear phone vibe

[@vKobie_TTV]

just got darkplates and ring light. My living room is black and red and its finally going to match my room with this set up. Wouldnt have known about the lights without this vid.

[@brandon_nope]

Those clear ones are so cool looking! Also have you bought the dbrand Darkplates yet?

[@MarcusG2G]

I have they are nice

[@mronissopwnage]

I love my ps5 with the dark plates. The quality is so good and paired with the midnight black controller it slapppppsss!

[@mydogeatspuke]

He answers this in the video. Try watching it before commenting.

[@brandon_nope]

@@mydogeatspuke I did and he only commented that he doesn't have it, not whether or not he bought it.

[@mydogeatspuke]

@@brandon_nope he said he hasn't been able to get hold of them. If he had bought them he would have said that instead. Stop being ridiculous.

[@Ali-ew9gv]

2:04 RBG lighting??

[@NeutralGenericUser]

I love your videos. Thank you so much for doing these. Also, I LOVE YOUR CAT!

[@WLChronicles]

The LED ring is a cool mod and would look much better with a frosted case. Thanks for sharing!

[@justgrayyy105]

The Ring light when it's blue looks just like the seconds leading up to the PS5's full design reveal, where the blue lights blink through the vents!

[@gulla04]

Ordered them at Walmart for 18 just for that effect. I may even do solid breathing red

[@Mr-bp8ef]

Bruh the ring lighting shinning through looks pretty cool ngl

[@PatSmashYT]

The mustard yellow is a good insight on what used ps5s will look like in 10 years

[@Flanders989]

The LED bleeding through the face plate actually looks pretty cool imo.

[@urfavoritehumanbean879]

6:05 white PS5 in a hot and lit room after 3 years simulator

[@charkellerule]

The blue lights shining through the after market plates reminds me of the PS2 UI when trying to load up a game

[@Karim94222]

14:55 the PS5 is so fast you wont have any loading screens. Alright then lets put the loading screen on the console

[@lavayuki]

These LED ones are pretty cool, I never thought about those. I only got the nova pink plates, but the logo colour ones seem like a good idea

[@BoSaGuy]

14:54 Teacher: Why are you laughing Me: no reason My brain: *Evil Windows Update*

[@BrklynRoses]

That "Gold" will match all your old kitchen appliances

[@jaycos3]

The clear and the L.e.d's look awesome. Cool mod.👍

[@max_91]

Last week for the first time here in argentina, i found a seller of a black faceplate and i bought it instantly. No regrets looks perfect and it should have been like that.

[@GhostofKaioken]

That all red remind me of the PlayStation two error

[@StarionX]

That gold one reminds me of kitchen appliances of the 70s. Harvest gold was the name. Now we need an avocado green version.

[@kyndakind]

Thanks for doing these to give us a taste of the customs out there. I'm keeping mine stock 😎

[@YoungShizzie]

how much are the clear ones ? I got a ps5 alredy

[@ToxMod]

Those Clear plates give the PS5 an industrial look. Great Video

[@noobgamer91613]

I've just received my ring and clean plates... can't wait to put it together tonight... already got the colour stripes for the led in front in double rainbow..... going to look nice i think

[@throwsnbrews9516]

the clear with the RGB is pretty freakin sweet. I'm not into RGB enough to do this, but that's definitely the coolest one - especially if your setup has a ton of rgb.

[@Colonelwalterekhurtz]

I just got the smoked out black transparent faceplates and the rgb ring 🤪

[@josephdikedi7697]

Why do we not ever talk about how good Ryan's spoken English is? As someone whose second language is English I'm really quite impressed by it.

[@Carl-G]

I really wish when the PS5 is on it has a Blue light on really :( Even in standby I would like it to be Blue to(yep I like Blue) :D Shame we can't select whatever colours we want because that would of been COOL :P Oh well.

[@mappybc6097]

Choosing the LED color eventually became an option for the DS4's light bar so maybe via a patch down the road?

[@TanmaySankolli]

Blue for the win!!!!!!!!! Blue supremacy

[@maybebutwhatever]

@@mappybc6097 you can ds4 choose the color only on a pc.

[@mappybc6097]

@@maybebutwhatever So?

[@timsmyth7942]

get a blue nightlight, no one wants the ps5 to glow bright 💀

[@Drebe73]

Frosted Translucent White with the LED rings would look sweet.

[@slycer4387]

How much for the clear ps5 shells? I painted mine black but I would love a pair of those with rgb lights that would very mint

[@travisbrown941]

The molded area you mentioned are called ribs. We add those in certain locations to help with dimensional aspects. Keeps the plates from worping.

[@rfh9560]

I can’t be bothered to pay anything for faceplates, then have to store the original ones… white looks good. I loved the “gold” actually

[@jonnyfive5000]

The black plates are the most appealing for me. But I feel the same. I don’t want to store my white plates or sell them off. The white is good and actually looks fresh in my tv stand. The black looks to bulky honestly. I’ll probably go for a black when they slim down the console in the future

[@rfh9560]

@@jonnyfive5000 i kind of like the unique design of the PS5 but it is very unpractical to handle, those plates with the edges sticking out, the PS4 was beautiful but more simplistic and solid, especially the original with the light strip on the top

[@jonnyfive5000]

@@rfh9560 the ps5 design has grown on me. I appreciate the boldness and the sophisticated tech look Sony went for. They used to be the top of the line when it came to audio and video technology. The design harkens back to that mindset Sony had in the 90s and up to the ps3. I hope they continue to to take risks in new games tho. The ps4 they played it safe because they were at their worst financially. So everything was very minimalist all the way to the design esthetic. I didn’t have a ps4 until the slim and pro models but do wish they included the light strip somehow. It’d be great if Sony gave us the option to change the light color and/or dim it on the ps5 thru the settings in the UI.

[@rfh9560]

@@jonnyfive5000 although i like the PS4 design better, the PS5 is more iconic already, they went for a really bold design especially compared to the new Xbox, it’s something that won’t be forgotten. It has its practical uses too, being able to easily remove the faceplates come in handy. The lights are used to convey information, it makes sense not being able to change the colours. I don’t even want them too bright either, could be too distracting

[@chijiokeuche4363]

This dude really likes the PS3 home console. Love the dedication you put in making this LTPS.

[@weird-manYT]

when he grabbed the "gold" plates, I thought it was just cardboard packaging from the box

[@jovonnebarclay5500]

It looks good the ring LED’s where would I go to get this and the face plates?

[@unbearifiedbear1885]

Iron man suit/panel design on the plate, blue breathing LED in the fan, with an Arc reactor style cut-out/insert in the faceplate First thing I thought when I saw Sonys original PS5 teardown video

[@filude305]

Do they have a kit to make it smaller so it can fit on my shelf?

[@Zinkolo]

I'm definitely getting that transparent one. I've been waiting for one to come for so long... AHHH

[@Neo_X90X]

I used to do all of this stuff to my wii, 360, and ps3 back in the day.

[@chocolatemilk9102]

Where do you get clear side panels?

[@Deedric_Kee]

Dope vid "Ryan some of that sht was clean 💯👍🏽

[@Lingham]

ADORE those LED strips. Just sucks your links dont send to the UK :(

[@graphicsgod]

I think the clear with dark window tint on it would be fire! Plus add the RGB, and you got a sexy PS5!! 😍😍👍👍🔥🔥🔥

[@artistikmiind5511]

I can do that at my job … lol

[@D71219ONE]

I have the dbrand plates. They do not have those markings on that part of the plate.

[@FreeAimDog]

i have an RGB keyboard and the lights lasted for years, when do the lights give out?

[@Xemnas283]

Damn the clear faceplates with the RGB lighting looks so clean

[@souljastation5463]

Normally I don't like clear shells but this looks pretty good, it's not showing the naked printed circuit board like most clear mods.

[@Rdwini]

I can’t be the only one that had a headache when he said “RBG” right?

[@lmShakeFTW]

Would be cool to get the clear plates on digit. But i can't find any for the digital

[@night_fiend6]

That "gold" one looks like aged PC cases from the 90s that used to be white. I like the LED shining through the solid plastic but only on one side because my monitor us right next to my PS5.

[@lanceparrish8352]

Frosted plates with the LEDs would look awesome

[@NotChris03]

why does the second link on PS5 Faceplates (Disc - Ships Fast) takes you to a Cadillac CUE Radio 13 - 20 ATS CTS ELR ESCALADE SRX XTS System Touch Screen Nav?

[@theyframedme]

I did the red lights around the fan, then on the interior of the ps Face plate I glued aluminum foil about 1/2 inch wider than the rings and it keeps the lights from shining through the face plates and reflects the light brighter where the ps5 led's shine out by the vents. Cheap and effective.

[@michaelappleseed1993]

Heeeeeey my favorite PS KZbin channel has made yet another video

[@adriangavida6617]

If u do end up testing the black face plate with led ring please let us know if it shows

[@paulbailey1276]

PS5 Manilla Folder edition! Also that ring light with a frosted panels or a diffuser layer with the clear panel.

[@easypeasy7161]

How does the ring light looks in the dark with the clear plates?

[@_sinkorswim_3927]

I ordered the led strips for the fans and a purple consol cover. To match my galactic purple handcontroller 😍

[@DBLCreations]

Man, i actually do like that clear plate with the LED Rings in it! 😍

[@aye3678]

Awesome video. Thinking of buying some of those ring lights for my PS5.

[@canadianty]

I see your BladeHQ exclusive Bugout there! Very nice! I didn't manage to get one of those exclusive models unfortunatley, however I did get a Bugout in blue G10, also with 20CV steel. I absolutley love it. Since I've gotten the Bugout, I've officially become a Benchmade guy lool. It was awesome to catch that in your intro. Do you have any other Benchmades? In a few years I'm considering getting a 940 Osborne.

[@KXZero]

Black plates, red lights, and some sticker decals, and you'd have a sweet Darth Vader vibe.

[@ShadowDeus]

Probably going with clear and RGB... drfinitly dwemeling more vents though... might cut the collar off too lol

[@mikesaintjulesmusic]

Nice. Might give this a try.

[@SonyEnthusiast]

Who didn't buy from scalpers?

[@SolarSkyline]

The LED light might be good if you just have the original faceplate on. It could shine that blue color we saw and make it show for longer.

[@eddi3401]

is it possible to keep the light bar on the controller while playing ps5 games? i know its on during ps4 games but i like the way it looks on the controller but on ps5 games the light bar turns off

[@pdg90]

The Interstellar Black plates from the Amazon link are a frost tinted black, looks amazing!

[@onlyAKZZ]

How do u put the ring lights on I wanna see a video on that sorry not a techy guy

[@henrysarson7417]

The clearplate set-up is really nice