Mytee Dry Upholstery Tool Review Part II

[@JoshJecklinDetailing]

8 years old and one of the best videos on this tool. Actually maybe the very best.

[@SweatTheDetails]

Thank you so much

[@tonymoore9128]

got mine yesterday and used it a lot today. I own a carpet cleaning and stone restoration company so we use it on furniture. We did several sofas and recliners and this thing is amazing! No over spray, wiping up water on the floor afterwards, continuous hot water and super easy to use. Makes our job faster but most of all we can do a better job and leave the furniture dryer. 5 stars!

[@SweatTheDetails]

It's really a nice tool, not to much buzz about it. It was hard for me to find much information before deciding to drop the 300 bones on it.

[@littlebeebs1]

Tony , you use the exact machine he uses and the dry attachment to clean upholstery ? I want to add upholstery cleaning to my cleaning business . Been looking for a machine I could clean upholstery and mattresses with while leaving fairly dry . You recommend this machine over any others ?

[@tonymoore9128]

Jennifer Liebo. I did not research the video but we use truck mounted carpet cleaning equipment. it is extremely powerful equipment however I turned my buddy on to this tool and he uses a portable cleaner and he loves it. in fact sense my last post we spent 700 on a different tool and we like the one in the video better. you can't go wrong with it.

[@tonymoore9128]

Jennifer Liebo I mean rewatch the video lol. spell check...

[@ansela3948]

Great detailed video! Very well explained and demonstrated. Pros and cons the whole 9.

[@supercharged00gtp]

Great video, I'm on the fence on ordering an extractor due to some of the challenges that you covered.

[@sam3d]

I use metal tool with see thru window and Internal spray jet... super fast dry times, and it didn't costa an arm and a leg.

[@michaelgardner5843]

I'm in love with this cleaning tool!!!!

[@leemorgan4037]

Found Formula 409 spray foam carpet cleaner last week, it is the best stuff I have ever used got all the stains out.

[@Scoot8428]

They do make a crevice tool, with a sprayer on it for hard to reach areas.

[@SweatTheDetails]

+bing crosby yeah I have a sweet one with a internal sprayer, may do a video on it. It's not a Mytee.

[@sam3d]

a clear plastic regular tool with internal jet is better and $250 cheaper.

[@buffboyzauto]

Which one

[@XtremeproDetailers]

Which one is better when you’re going mobile detailing all the time

[@1minibean]

Have you had any issues with the HP60 with the pump ? I used mine once, and then on the second use it wouldn’t spray and the pump ran continuously. I had to open it up and disconnect the clean water feed and blow air/water through it into the pump and then it worked. I agree that the supplied tool is a pain in the ass for car interior. Seems like this new attachment you got is way more useable.

[@SweatTheDetails]

I just did a review on my HP60. Been pretty lucky with it. No real issues in 10 years.

[@buffboyzauto]

Maybe hydro lock? Be sure to prime the pump for at least 30 sec before turning on the heat and then priming until it gets hot

[@josephmcvey9195]

I JUST GOT MINE AND IT WONT HEAT AFTER 3 MINUTES OF USE NOMATTER THE TEMP OF THE WATER I PUT IN OR IF I LET IT HEAT UP FPR 20 MINUTES ITL GET THE BRASS SUPER HOT THEN NOTHING AFTER USING FPR 3 MINUTES MY UNIT IS BRAND NEW ANY SUGGESTIONS BEFORE I SEND IT BACK

[@sherifnabil50]

By the time you're done with the backseat the seat is dry? That's a lie!

[@SweatTheDetails]

This tool really does not get the material very wet. It’s really good in that aspect. But it also doesn’t clean as well as a pressurized sprayer.

[@JoshJecklinDetailing]

He’s not lying. If it’s a hot dry summers day the seat dry out super fast. If you add a commercial drying fan seats will be dry so fast.

[@metrowash]

Great video! Question-Do you have to use a defoamer with folex?

[@SweatTheDetails]

+metrowash no it doesn't really foam.

[@samuelhannan5532]

What kind of cleaner?

[@raulvalle4920]

Hey what's up men good video the mytee nozzle 8400 ot doesn't have a trigger so how it works and how much is it

[@SweatTheDetails]

There is a thumb controller on the top to control water flow. It uses a lot of water. You believe the price was around $300.

[@creeplife2802]

LOL sorry but this is no longer a mytee test once you brought in the tornador. Those products are killer.

[@tobytyler4223]

What was that Tornado sprayer? Link please

[@c6z061]

Did you have the solution on full blast?

[@gillkanis6341]

how much is this steam machine?

[@RealMyToys]

Hows it working out for you? Still feel good about your purchase?

[@SweatTheDetails]

+MyToys yup it's a great tool. Little pricey but if you do this for money it's well worth it.

[@jaimesoto5513]

Good video!!