today we start a engine rebuild that will be done on the tail gate of a pick-up truck video one is tear down
Пікірлер: 177
@alexrobinson25202 жыл бұрын
Thank goodness you’re back !!! Keep the content coming thank you so much for sharing your knowledge!!!
@robertbeckler50582 жыл бұрын
I am going to get to have my two sons over this week end. Know we will have something to spend time doing together. Watching this guy and talking iron. It's my one son's birthday. He will be 15 so it's time to have fun.
@Myvintageiron75122 жыл бұрын
nice, I always say get your kids into cars and they will never have money for drugs
@robertbeckler50582 жыл бұрын
@@Myvintageiron7512 yep my ex was asking me why I get them tools they will not use and I tell her so I can borrow them.
@Patrick_12272 жыл бұрын
@@robertbeckler5058 i am 14 and i will be building a 540, a 327 and some other motors with my dad soon.
@robertbeckler50582 жыл бұрын
@@Patrick_1227 yep we have a 78 f250 and a 68 f100 to start on as soon as we build a garage. All kinds of good stuff
@Roadglide9112 жыл бұрын
Brings back old memories of my youth. No special tools just the basics. We didn’t even have torque wrench. Never had one come apart and that amazing.
@jackstandracing74002 жыл бұрын
This is a great idea, man she got mad when I rebuilt one on the kitchen table. so I moved to the porch, tailgate sounds a little better! 😆
@Myvintageiron75122 жыл бұрын
Go for it!
@allanexteminator11 ай бұрын
I love this engine! For me it is the best that has ever been made.
@stevegarrett48692 жыл бұрын
Great video!! Love seeing this done shade tree style! Love the tire for the engine to sit on. I did the same thing as a kid when I painted my engine when it was out of the car as a teenager.
@Uppercut3142 жыл бұрын
Thanks. Glad to see you once again👍
@LionWithTheLamb2 жыл бұрын
Glad that you're back, i am sure that we all have missed you and your videos.
@jackbrennan84762 ай бұрын
Thanks for all the good information
@jamesbergman49172 жыл бұрын
Appreciate the return. Good video.
@2old2rodeo2 жыл бұрын
I always enjoy your videos. A lot of guys know their stuff but can't present it in a way that the average guy can understand. You do an excellent job. Thanks for the video.
@Myvintageiron75122 жыл бұрын
I appreciate that!
@TopSecretGarage22 жыл бұрын
Glad to see you again!! Thank for sharing all your knowledge👍🏽
@Myvintageiron75122 жыл бұрын
thx
@cesarmagdaleno60092 жыл бұрын
Good to see you back. I love all the stuff you show. Especially the ford stuff. I also loved all the background noises.
@philipolah7279 Жыл бұрын
Love That pushrod trick for removing plugs!😜
@ibm_businessman60337 ай бұрын
Thank you so much man, Passing on the torch of knowledge!
@jamesscimone14472 жыл бұрын
One of THEE BEST channels right here for SURE !!!
@waynelemieux51112 жыл бұрын
I like your show I watch a lot of these mechanic shows one thing nobody talks about and rebuild straightness the block or straightness of the head for warpage
@dwighttravis54842 жыл бұрын
I can't tell you enough how good it is to have you back making the best engine videos that are on UTube !!!!!!!!!
@Myvintageiron75122 жыл бұрын
thx
@MRtucnakCZE2 жыл бұрын
Great comeback! Looking forward more of your vids. Keep them comming on your own pace.
@92BiminiCoupe2 жыл бұрын
SO Glad you're back!
@f100unibody92 жыл бұрын
Glad to see you back!
@Myvintageiron75122 жыл бұрын
thx
@brianmaynard73202 жыл бұрын
Glad you're back!!! Hope things are going well! Great little video and I hope you can give us an update on the S10 and Clevor block. Hp etc. Take care and looking forward to your next video!!
@fornowok2 жыл бұрын
Glad you're back! I missed your content and I enjoyed your episodes, I've seen em' all. Keep well.
@tomross90702 жыл бұрын
so glad your back!! while you were gone i built an ICE tesla for a prank,in my back yard but not on my tailgate.lol
@20alphabet2 жыл бұрын
Good to see a new upload !
@HeadFlowInc2 жыл бұрын
It’s amazing what can be done with a decent core. Thanks for the build series! JD
@Myvintageiron75122 жыл бұрын
Thanks for watching!
@stippett1292 жыл бұрын
So glad for the new video
@lukepokrajac10572 жыл бұрын
Great video...and great core to build. That block was in nice shape.
@rockfordhx2768 Жыл бұрын
Your the 4 bolt main master any 350 I see on this channel it’s always a 4 BOLT
@enginebuilder73932 жыл бұрын
Welcome back, was wondering where you went. Amazing what you can do with only a tool set
@garywood602 жыл бұрын
Happy to see you back with us again. Always enjoy your videos. God Bless and keep y'all safe.
@Myvintageiron75122 жыл бұрын
Thanks 👍
@Sloppyjalopy1232 жыл бұрын
I appreciate your style of teaching! I can tell your an instructor. My dad is a collision repair instructor at our local college. And you guys are 2 peas in a pod, how you relay the information👍👌!
@Myvintageiron75122 жыл бұрын
That is awesome!
@parkeranderson50742 жыл бұрын
Glad to see you’re back 👍 Hope all is well with you and yours.
@Bill_N_ATX2 жыл бұрын
Glad to see you sir after more than a minute.
@aascher40392 жыл бұрын
Pittsville Wisconsin checking in!
@BubbaAyers19692 жыл бұрын
Glad to see you again, Great video Thanks for sharing with us 👍
@Myvintageiron75122 жыл бұрын
you bet
@MrTaskforce552 жыл бұрын
Welcome Back!! keep 'em coming...
@Myvintageiron75122 жыл бұрын
Thanks! Will do!
@moya0342 жыл бұрын
Cool project, thanks for sharing!
@Myvintageiron75122 жыл бұрын
Thanks for watching!
@Gammaflat2 жыл бұрын
So cranked to see you back. Nice synergy... On a trip... do an engine with tools anyone could get. Welcome back!
@Myvintageiron75122 жыл бұрын
Thank you!
@jimbonettles2 жыл бұрын
Hey man, glad you are back, just wanted to say your camshaft selection video was invaluable as a newbie building his first engine. Thank you for the great content and for making hot rodding seem accessible to just about anyone.
@Myvintageiron75122 жыл бұрын
Glad I could help
@jeeptk Жыл бұрын
Backin the day the lifter tick was caused by excessive bearing clearance on many of these 5.7s. Did quite a few sets of bearings at Chevy and GMC dealerships.
@jasonfenn33912 жыл бұрын
Hi.. well I'm very happy to that you're still alive..and like some wondering what happened to you . Please take care.. and if you really enjoy doing the videos then keep them coming and I'll keep watching them.. stay safe and welcome back 🙏
@numlockkilla2 жыл бұрын
Awesome.
@StevenPfeiffer2 жыл бұрын
Yes…. He’s back!!!
@harryrobert852 жыл бұрын
Glad you’re back making videos…….so informative.
@Myvintageiron75122 жыл бұрын
Thank you!
@ccsV82 жыл бұрын
Great! regarding from Chile!!
@Myvintageiron75122 жыл бұрын
Thanks for watching!
@Tinman973012 жыл бұрын
I've missed you bud. Glad you're back with a video 👍
@Myvintageiron75122 жыл бұрын
Thanks 👍
@ClassicRideSociety2 жыл бұрын
Was beginning to think you weren't coming back
@jasonolds76112 жыл бұрын
Favorite builder hands down..
@Myvintageiron75122 жыл бұрын
nice
@mikkokuorttinen31132 жыл бұрын
It's really nice to see you again! Great thanks for all of your videos, they have been an inspiration for me!
@mikkokuorttinen31132 жыл бұрын
I have a Vortec engine project with those .0006 std rod bearings. Could I replace the Vortec crank with LT-1 Crank to avoid the machining cost?
@Myvintageiron75122 жыл бұрын
yes
@superduty45562 жыл бұрын
Oh, you're alive
@smi1722 жыл бұрын
Sir, where have you been? Please make more content. Thank you for your channel.
@uniquehorn14802 жыл бұрын
You make really excellent and useful content...thanks! You explain and visualize things so well.
@captainwhiplash2 жыл бұрын
Man where ya been. Curious as hell about the s-10 and the S-10 big block.
@juangarza77322 жыл бұрын
Good to see you glad you are doing good
@Myvintageiron75122 жыл бұрын
I am!
@mgermca2 жыл бұрын
Great stuff! Glad to see you're back! Thx!
@mr.obvious4371 Жыл бұрын
I asked an old timer one time if he had an engine stand he said it's easier to build it does rolling around on the bench put the cam in vertically too
@blackbuttecruizr2 жыл бұрын
Welcome back, AWESOME content!
@Myvintageiron75122 жыл бұрын
Hey, thanks!
@shootermcgavin28192 жыл бұрын
PB Blaster 👍🏻
@ibrahim-chevelleMalibuman2 жыл бұрын
It’s nice to see you back
@TheDamnGarage2 жыл бұрын
I'm glad you're back! I have missed watching you. I don't do much real engine work but I do like learning what you have to say.
@Myvintageiron75122 жыл бұрын
I appreciate that!
@Stainlessslayer2 жыл бұрын
Nice part of an sbc is a 9/16 wrench will do a lot of the work.
@dougkinney45212 жыл бұрын
Terry, great video,.
@Myvintageiron75122 жыл бұрын
Thanks 👍
@Dboyquicks102 жыл бұрын
I wish I had watched this video last month. I tore down my vortec block and removed the lifters thru the top. They were hard to get out in fact I had to clamp on to them with vise grip pliers to get them out. Probably ruined my block.
@jrod264winmag2 жыл бұрын
I’m putting a set of Ik180 brodix heads and a nice rollercam in a TBI block right now
@Myvintageiron75122 жыл бұрын
Good choice!
@tobywhitaker42462 жыл бұрын
I hope there is going to be a part two!
@justinemery4153 Жыл бұрын
Bad ass video !!
@Myvintageiron7512 Жыл бұрын
THX
@maskedmotorsdiy35752 жыл бұрын
This is a very cool idea, cheers!
@Myvintageiron75122 жыл бұрын
Glad you like it!
@marcusmaddenov24512 жыл бұрын
Welcome back missed you.
@Myvintageiron75122 жыл бұрын
Thank you!
@oldcarnocar2 жыл бұрын
Damn good engines,87-95 tbi 350's had 210 hp 300tq stock,torqey as F! i had a 89 chev with one,total badazz hauler(1/2 ton stepside)700r4 and 3.08's it pulled HARD at the stoplight drags. damn i miss that truck
@Myvintageiron75122 жыл бұрын
yea and if you upgrade the cam and install flat top pistons it wakes em up pretty good
@oldcarnocar2 жыл бұрын
@@Myvintageiron7512 true,but i was good with a stock LO5, enjoyed the video, too many "LS" engines out there,need more 350 sbc!
@brianbudzinski97342 жыл бұрын
glad you are back!
@cdpperformance26132 жыл бұрын
I’m doing my first build it’s a 95 Chevy 305 tbi .030 over was all done by my local machine shop on machining but I purchased 10 boxes of Hastings rings for pistons the part # 5499 030 bore was supposed to be 3.7660 but all ring gaps are around top .025 I am going hypereutectic pistons but I have alittle more movement side to side in afew pistons then others really none skirt to skirt movement I can flip same size and brand piston and put a filler gauge into it skirt to wall and .003 is max it drags pulling out now others .002 drags is this normal was going to close up with heads over the weekend it’s my late fathers truck I’m re-doing I’d never just do a 305 but it made it to 635k! 3rd trans 2nd rearend same engine !
@Gratitude6ixty9ine2 жыл бұрын
Hello good sir ! Huge fan here
@MinnesotaisRust2 жыл бұрын
We have missed you!
@darrellbriggs66742 жыл бұрын
Great to see you back mate, love your work. From
@Myvintageiron75122 жыл бұрын
Awesome, thank you!
@100amps2 жыл бұрын
Welcome back. Great idea for a series. Can I rebuild an LS core with minimal tools as well? That's been a bit of a mental showstopper for me. I'm worried I'll be committing myself to $10k of tool purchases, that would be better spent on parts.
@Gammaflat2 жыл бұрын
LS's do kind of require some specialized tools. Notables are front and rear seal alignment tools. Covers don't have locating dowls?!
@100amps2 жыл бұрын
@@Gammaflat Thanks Cicero.
@prevost86862 жыл бұрын
Glad to see you again. I was beginning to think that you retired to Hawaii.
@Myvintageiron75122 жыл бұрын
well the thought has crossed my mind
@philipmazzuca22692 жыл бұрын
Nice to see your back
@bartsarton22122 жыл бұрын
And his front.
@randy1ization2 жыл бұрын
after u pull the heads, and valve covers, spray them down with easy off oven cleaner. then the next day respray to loosen the crud because it will dry flaky overnight., then in abt 2 hours, go to the local carwash and spray them with high pressure water.. -take all of your bolts and nuts, and put them in a large pickle jar, and spray oven cleaner in there and roll them around until well coated.. next day, rinse them with hot water, dry well, then light oil.. this will save you DAYS of scraping and scrubbing. if you want to check your block and heads for cracks, once clean, LIGHTLY sprinkle baby powder on the heads and block. if there is a crack, it will show as a line in the powder.
@randy1ization2 жыл бұрын
after your nuts are clean as well as your bolts, use a wire wheel on a drill to clean the old teflon sealant. off of the bolts.
@overbuiltautomotive12992 жыл бұрын
nice
@CITYBORNDESERTBRED2 жыл бұрын
Welcome back dude 🤘🏾
@Myvintageiron75122 жыл бұрын
Appreciate it
@justintornes66222 жыл бұрын
Any experience drilling fuel pump rod hole in late model vortec 5.7 to run a manual fuel pump? I understand I may need a different cam with the pump lobe. Also what about the cooling passage differences between old and late model blocks? Thanks. Love the content!
@bartsarton22122 жыл бұрын
So glad you're back! I only trust you to show me how to do things the right way. With regard to the special-sized connecting rod bearings, can you not go to the Chevy dealer and get 0.0006" bearings?
@Myvintageiron75122 жыл бұрын
no they don't sell the bearings it's something that was done at the factory them make their own bearings as needed for each engine
@biastv12342 жыл бұрын
Welcome back , I thought the silly cough cough flu got you. Cheers from Australia
@Myvintageiron75122 жыл бұрын
thx
@CITYBORNDESERTBRED2 жыл бұрын
Can we request a LS tailgate rebuild next?
@samtruglio65442 жыл бұрын
Question sir, what is purpose of that round tube connected to the timing cover tab? I'm about to assemble my sbc 355. Thank you
@Myvintageiron75122 жыл бұрын
I still haven't figured that out as far as I know it's factory thing never done anything with it the timing is on the flat tab, I just ignore it
@samtruglio65442 жыл бұрын
@@Myvintageiron7512 thank you for the reply. Really enjoy your videos, they are what inspired me after a 35 year hiatus. Lol thanks again
@JOMaMa..2 жыл бұрын
That’s for a magnetic resonance style timing pick up..not sure if this the correct terminology yet the tab is for a magnetic pickup
@Paul-oo6uu2 жыл бұрын
You were saying you can not reuse the 1/2 head bolts. Will the 5/8 bolts fit right in?
@Myvintageiron75122 жыл бұрын
no the head bolts that take a 1/2 socket on the head should not be reused the bolts that take a 5/8 socket can be they are both 7/16 bolts, but they changed the head size for the TQ to Yield bolts to distinguish them from the earlier reusable bolts
@jjmccloud2 жыл бұрын
If I wanted to swap the stock pistons to flat top pistons will I need to balance the rotating assembly. I know it would be best to do so but is it a must to have done
@Myvintageiron75122 жыл бұрын
I would
@jjmccloud2 жыл бұрын
@@Myvintageiron7512 Damn it lol I knew the answer but was hoping 😅 back to the machine shop lol
@terrybishop41192 жыл бұрын
Missed seeing new videos
@michaelfrancis32612 жыл бұрын
Hello please keep these videos coming, you're impacting more people than you. Love your videos. I have a few questions please, 1. can a roller lifter or the port it sits in cause low oil pressure? 2. can the camshaft cause low oil pressure?
@Myvintageiron75122 жыл бұрын
Yes and yes
@petesanchez38122 жыл бұрын
I just built one on my tile gste
@mackbee57632 жыл бұрын
I glad your back..I have a issue I've a sbc 400/406 with brodix aluminum heads had all the machine work done engine is complete but my issue is when the engine running the cooling temp start to rise i can say it will get to 190 to 200 with in like 10 15 minutes at idle the steam hole was supposed to been drilled in the heads but don't really know but what's else will cause this..thanks
@Myvintageiron75122 жыл бұрын
There is nothing at all wrong with 200 degrees if that's all the hotter it gets just run it also 10 to 15 minutes seems like a long time to warm up it should be faster than that do you have a T stat in it?
@mackbee57632 жыл бұрын
@@Myvintageiron7512 yes I do have the stat but I went and removed both of the heads and found no steam holes drilled in my aftermarket heads do u think thats an issue for a daily driver
@Myvintageiron75122 жыл бұрын
@@mackbee5763 I would get them drilled now that they are off any decant machine shop can do it but like I said 200 to 210 is no problem for that engine in fact most modern engines run over 200 degrees and they wear much slower at that temp as opposed to the 160 to 180 range
@mackbee57632 жыл бұрын
Yes im going to get the steam holes drill and milled im going to reach out to r&r and thank you for corresponding with me about my issue i appreciated
@HeadFlowInc2 жыл бұрын
I’m going to go ahead and say there’s no reason to worry about (.0001”) differences in bearing clearance on a tailgate rebuild. Not only is the average plasti-gauge rebuilder not able to measure accurately at .0001” but average builder is looking at the .001” accuracy. Please don’t automatically assume you have to turn the crankshaft when a polish or less might work fine. JD
@Myvintageiron75122 жыл бұрын
I agree that you don't need to worry about .0001 but .0006 is going to put this out of spec and I can't do that
@richardbates2367 Жыл бұрын
How did you like the working with the harbor freight Pittsburgh socket and ratchet mechanic tool set just wondering sir...
@Guepard_Motors Жыл бұрын
Hello! Could you please tell how heavy is empty cylinder block? Can one person lift it? Thank you! 🙏🏻
@easyjerryl692 жыл бұрын
I really like your videos ! I have a question. I have an 1989 350 chevy block that is TBI. I want to buy an 880 casting short block because of the 4 bolt and roller cam setup. Can I put a 450-480 lift cam shaft and run that with TBI ? Ive watched one of your videos about too big is a waste because power los.
@jcanfixall1585 Жыл бұрын
I'm not 100% positive and i have not watched the whole video yet (and i know it's an old video) but I think if the fuel pump location is capped it is drilled for a pump, if there is no cap then it's not drilled... They would cap it to seal the "hole" in the block...
@vettegreaser65902 жыл бұрын
I have a 350 block that was supposedly rebuilt. The pistons look brand new. It was supposedly bored 30 over. I have no information on the cam or anything else. What do you recommend I do?
@jrod264winmag2 жыл бұрын
$300 bucks? A clapped out 350 in my area is around 700 or 800
@Myvintageiron75122 жыл бұрын
I see them for that here also you need to look around
@robakagyser2300 Жыл бұрын
@myvintageiron7512 is a there a specific way to identify a 5.7L TBI block like this with the 4 bolt main journals, and the drilled bosses for the spider bracket for the roller cam lifters? What donor vehicles would have this 4 bolt block? I am considering a 350 build, for a daily driver, and used the 350 Vortec factory heads.