N Scale Layout Update 17 - Loading Facility Installed

Installing the custom 3D printed Oil Refinery Loading Facility on the layout.
Build video:
• N Scale - Oil Refinery...
Follow on Instagram:
/ nscaler454
If you would like to support the channel:
www.paypal.me/S...
/ nscaler454
Amazon Affiliate Links:
10 Pack of Paint Jars: amzn.to/3BWkFh9
Tamiya Lemon Yellow: amzn.to/3cfH0a7
Tamiya Metallic Grey: amzn.to/2Xvw8B0
Tamiya Old Iron: amzn.to/2WBneBp
Tamiya Sky Grey: amzn.to/2xVgTXd
Vallejo Model Wash Black: amzn.to/34utaxs
Model Air Aluminum: amzn.to/3uBmImO
Rustoleum Semi Gloss white: amzn.to/2RdwKGY
Rustoleum Flat white: amzn.to/33PLwaJ
Tamiya Cement: amzn.to/2textPo
Elmers Glue-All: amzn.to/2J7kROL
Micro Spoons: amzn.to/3bmiOCQ
Klien Flush Cutters: amzn.to/2QUIFum
Micro LED's: amzn.to/3Y6eUap
AnyCubic Mono X 3D printer: amzn.to/3uAcEut
AnyCubic Wash & Cure: amzn.to/3BpNFhf
Elegoo Water Washable Resin: amzn.to/3HpWgo2
--------------------------------------
Music:
After the Rain by Tokyo Music Walker Stream & Download : fanlink.to/tmw... Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Sunset Drive by Tokyo Music Walker Stream & Download : fanlink.to/sun... Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Slowly by Tokyo Music Walker Stream & Download : fanlink.to/tmw... Creative Commons - Attribution 3.0 Unported - CC BY 3.0

[@Stew-jz8dz]

Your loading facility is fantastic looking!!!!!

[@nscaler454]

thanks!

[@cncpgreatlakesdiv4896]

great work looks good thx for the update.😊😊👍👍

[@dougkinney3207]

Nice video! Thanks for doing

[@nscaler454]

Thanks for watching!

[@Longshadowsmodeltrees]

Outstanding job, like the detail. Bob

[@tommythomason6187]

Never seen an oil loading facility and I'm modeling Texas in N-scale, lol. I have built a couple, but not seen the sheds before, so learned something new. That plastic makes good passenger depot platforms, also.

[@dale9632]

So waiting for next clip on this , I'm already wishing I could wave a magic wand and transport to my layout.

[@gerdeguelle1967]

Very nice video

[@markcentola2817]

nice work

[@brandonnawrocki9004]

Fantastic! Great work.

[@dacuzzz]

hello Nscaler454 i like your idea with the track bumpers... sanding the [plastic to fit over the nail is a awesome idea. .the finished scene looks great... i am new to our channel & have subbed with the bell...i am an N scaler. i'll be doing m 3D printed loading dock soon...thx 4 sharing... vinny

[@nscaler454]

I have been planning a 3D loading dock as well. I would love to see how yours turns out.

[@rhikdavis]

Coming right along!!!

[@RudiVDS]

NIce build and great video

[@nscaler454]

Thanks!

[@randysrockandrollrailroad8207]

😊

[@elleryparsons2433]

Your Layout will Look Sharp when Done Don’t Rush it.

[@baronjutter]

I'm glad to see even a pro like you has a very slight kink where the flex meets the turnout. I really struggle with that with peco flex. Never had that problem when I was using ME flex. I honestly don't care for peco flex very much but their turnouts are so good. I wish peco was true c55 so it could join up with other brands of C55 track easily.

[@nscaler454]

I learned my lesson. Solder track that is going to be in a corner.

[@JohnAPrescott]

This turned out great!

[@zozocreek8327]

👍

[@cpwhiskycreek]

Looks really good

[@seanspennywisemiserrr]

Fantastic looking loading facility. Did you print these yourself?

[@nscaler454]

I designed and printed them myself. Thanks!

[@seanspennywisemiserrr]

@@nscaler454 do you sell them?

[@nscaler454]

@@seanspennywisemiserrr I don't think I would sell this one. The print time alone would never make it worth it.

[@seanspennywisemiserrr]

@@nscaler454 how about a single track with two bays?

[@nscaler454]

@@seanspennywisemiserrr If you watch the build video you will see it's not very adaptable to be used as a single track or even half the size. Id have to do modifications in the design files to make it work. I did put some sections up on Shapeways for a quote, and it'd be well over $200, maybe $300. Yikes.

[@Stew-jz8dz]

Who did your 3D Custom Loading facility? I have been trying to build one but running into problems for the actual hose arrangement to fill the tankers.

[@nscaler454]

I designed and printed it myself. How is your hose arrangement posing a problem?

[@ActAshira]

That is so cool! What program did you use to design the 3D parts?

[@nscaler454]

Fusion360

[@ActAshira]

@@nscaler454 Thank you for the swift reply! I just found your channel today, very useful stuff! Do you print the parts yourself / what printer do you use? I just started collecting US trains and I'd love to learn as much as I can before I proceed.

[@nscaler454]

@@ActAshira I print on an Anycubic Mono X. There are better printers now though. Thanks for checking out the channel. You can see my prints at www.nscaler454.com

[@elleryparsons2433]

If you Want Bend The Coupler Hose Upward With players =no Problem.

[@asparks65]

Great video! Did you buy the file (if yes where may I ask?) or model the tanker platform yourself?

[@nscaler454]

Thanks. I designed it myself.

[@baronjutter]

Another question: I have trouble soldering without a heavy dollop of nasty lead based solder paste, but I don't see you using any flux at all. Are you just soldering straight with nothing but the iron and solder? What's your secret?

[@nscaler454]

I use a flux paste, but only enough to coat the rails. No globs. Also I use a fine tip on the soldering iron. Lastly, make sure there is enough heat in the rail, that heat will pull the solder in.

[@baronjutter]

@@nscaler454 any particular brand or type of flux you like? I got a non-lead style but it's so thick, more like wood-filler.

[@marioxerxescastelancastro8019]

The music is annoying.

[@KatoOnTheTrack1]

Wasn’t that bad

[@dougkinney3207]

Nice video! Thanks for doing