Building the TAMIYA 1/12 Kawasaki Ninja H2R Plastic Model

[@lanza1st]

初コメ、失礼します。 タミヤのH2R、作り始める直前にこちらの動画に出会いました。 微に入り細に入り、作り込みがすごくて圧倒されました。 また、丁寧な基本工作は非常に参考になります。 自分にできる範囲でこちらの動画をお手本にしながら、自身のスキルアップができればと思います。 実は私は仕事中の事故が原因で左半身に麻痺があり、リハビリ目的でプラモ作りに戻ってきた 所謂「出戻りモデラー」です。 私自身、元々バイク乗りで主にヤマハ車に乗り継ぎ、バイクのプラモもヤマハ車メインで作っていた時期があります。 まぁ出戻り前はガンプラとバイク模型オンリーで、基本的な塗装のみでほぼ素組みで、 とにかくバイク模型に関してはコレクションするのが楽しい時期でした。 特に自分が所有したことのある、初期型のFZ250フェザー（初めての中型）と初代YZF-R1は模型化されていることもあり、 色違いとかいくつも作りました。 現在は怪我起因の障害が原因で通院リハビリしながらの自宅療養の身。 そのせいか、過去に寿命まで乗り潰したバイクや泣く泣く手放したバイク、高嶺の花で憧れたバイク等、 自宅での手や指先のリハビリ（私の症例では主治医が模型製作をリハビリの一環として推奨）を兼ねて、 いろんなプラモに手を出しており、今回は行きつけの模型屋の福袋にて YZF-R1、YZF-R1M、ドゥカティ1199パニガーレSとH2Rを引き当て、早速純正ディテールアップパーツや タミヤ汎用カーボンデカール等を買いそろえ、コメント入力時点でYZF-R1の製作中。 製作開始時にこの忘我を閲覧させていただき、少々まごつきながらも今まで以上に基本工作を」丁寧に行いながら、 『まずは完成させる事』を念頭に置いて車種は違いますが動画をお手本に組み立てています。 流石に細かい部分の改造や省略個所の再現はできそうにありませんが、少しでも完成度を高められるよう 自分なりのマシンを作れるよう頑張ってみます。 長文コメント、失礼いたしました。

[@kenji-plasticmodels]

ありがとうございます😃 思うように体が動かせない辛さ、想像を絶しますが、プラモデルをリハビリにされているとのことでさらに驚きました。 とても難しい作業の連続になると思いますが、是非楽しみながら頑張ってください👍

[@michaelbaykara2322]

Quite possibly the BEST modeler of the world!

[@michelecasella9085]

Yesss

[@demazejr]

I agree 🤙

[@janvanrenselaar5998]

No doubt about that. My chin is falling at every build from this ARTIST 1 meter more down, this a builder on GOD level.Have no other words for that. Seen the Ninja 9 and the Nissan gtr builds,but this is freaking awesome.

[@michaelbaykara2322]

@@janvanrenselaar5998 you'll feel like that on every video he has posted, I've watched them all several times, it's like an education.

[@janvanrenselaar5998]

@@michaelbaykara2322 Yes very true. I got a good level of building models. But this man is making the models he build so much better with so much preciscion that i feel like a beginner in modelling. It is a lust for the eye to see this masterbuilder dooing those things. I have now holidays and gonna watch all his builds. Cannot get enough of it.

[@今安規夫-h5o]

この人が作ると１/12のエンジンが1/1に見えますね。そしてBGMが素晴らしい。深夜に眺めていると心が和らぎます。

[@kenji-plasticmodels]

ありがとうございます！

[@泰介太田]

やはりかっこいい！！それに主さんの技術すごすぎ

[@k2yoshhy]

神の手とはこのことをいうのでしょう。前のめりになって見せていただきました。 すべてがすごいですが、カーボンデカールは醍醐味でした。

[@kenji-plasticmodels]

ありがとうございます😃

[@makih3426]

実物に乗っていますが細かいところまで作り込まれていてすごいですね

[@kenji-plasticmodels]

実物のオーナーさんに言われると余計に嬉しいです、ありがとうございます。

[@kinteeen_aries_a3116]

サーキットで走られてる方なんですねぇ

[@u2552]

いや～凄い！凄すぎてヒーリング動画のような感じで全部見てしまったわ。 センスが素晴らしいんやろう、技術だけでなく調色なんかも神レベル！ホントキレイ。

[@okok1681]

信じられないことの連続で片時も目が離せない・・・

[@devilbed9781]

何という贅沢な動画！カラーリングめちゃくちゃ似合っててかっこいい。

[@Rodrigoo00403]

Hi my name is Rodrigo I'm from Brazil I like your videos 🇧🇷🇧🇷

[@kenji-plasticmodels]

Hello Rodrigo, Thank you!

[@bendenden]

Excellent video and a stunning result. A huge inspiration to tackle my first motorbike model.

[@BulbEvil]

The most beautiful H2R model i have ever seen

[@kenji-plasticmodels]

Thanks👍

[@joe_i]

人間の手というものはかくも細かい仕事ができるのですね。「素晴らしい」のひと言しか思いつきません。今年一番短く感じた１時間半でした。

[@kenji-plasticmodels]

ありがとうございます！

[@alessandrosalvi4836]

Ne ho assemblate un centinaio. Peccato aver visto il video solo ora. Ho imparato molto. Complimenti bellissimo lavoro

[@shawng7902]

you seriously drilled out the holes for the ABS sensor?? wow!! that's wild. I really like the steel braided hose idea also. I've never seen that .04mm tube like that before. But after you made those steep braided brake lines with it, I cant live without it anymore. That looks absolutely perfect for rubber-coated steel braided lines. the grip detail is phenomenal on this one. Even the safety wire groves in grips. The screws on the bottom of the turn signal switches. Then you just blew it all away with push rods and all. The exhaust was worth a whole video in itself.

[@kenji-plasticmodels]

Thank you!

[@ふるっち-p8v]

凄すぎる🥲 ずっと見ていられる！

[@齋藤チャパヘイ-g9z]

これは、ある意味スターウォーズの特撮レベルですよ、"帝国の逆襲"においてのミニチュア技術を追い抜いてます。ここまで細部まで表現できるとは見事なものです。日本人ならですね。

[@種子田聡]

今回も最高でした。次回も楽しみです！

[@nemokat09]

I am about to build my Yamaha YZF-R1M. Your work is truly inspirational. Amazing craftmanship.

[@kenji-plasticmodels]

Thank you!😊

[@JeffreyStrader]

Absolutely Beautiful!..................信じられないほどの技量！

[@joemoore4027]

I'm a little late, but it's beautiful. I love the red and white versus the black look !

[@kenji-plasticmodels]

I'm glad you like my original color. Thanks

[@frankierzucekjr]

This one is super cool. Had a lot of parts. Unbelievable job, it's so clean and precise. You're one talented guy. Just incredible 👏 👏 👏 👏

[@kenji-plasticmodels]

Thank you!!😀

[@潘軍-d3s]

您的摩托车仿真模型做工真好！👍👍👍あなたのオートバイシミュレーションモデルは本当にうまくいきます！ 👍👍👍

[@shallteargf5974]

Awesome work. I also tried using the MrColor products for the muffler but when i try to use it in airbrush it clogs and breaks the airbrush. Any pointers on what i may be doing wrong?

[@kenji-plasticmodels]

-Are you using the right thinner? -The paint is too thick, so try using 1 part paint and 2 to 3 thinner liquid.

[@shallteargf5974]

@kenji-plasticmodels alright i will try. Thank you!

[@modelerarnold3125]

Wow... …とてもBeautiful!! 37:13 円筒の側面を伸ばすと sine-cosine function graphになるので、断面の radiusと slope angleを measureすれば Masking Tapeに直接 drawing 可能です。

[@kuri369kuri]

Every video is amazing. The craftsmanship of your work leaves me speechless

[@yuk4429]

色のバランスが美しいなぁ

[@kenji-plasticmodels]

ありがとうございます😃

[@calvinsstuff]

Absolutely mind blowing skills! That oil cooler was truly a work of art. Why do the kit manufacturers insist on cross head screws for engine & subframe mounts, it draws my eyes away every time

[@gerryedwards523]

You can always disguise the Phillips screw heads by making some large nuts,with bolts protruding, from hex styrene rod. Painted and weathered, it is hard to tell they are not real and you don’t have to see those ugly, and out of scale, screws.

[@Leviathan0709]

凄いクオリティのパーツ群　を！更に本物に近づける神業のような技術！最初にじっくりパーツを眺めながら「このパーツじゃこういう風にしよう！」とか考えてるんでしょうか？ そこで思いつく改良技術は凡人には到底及ばない領域なんだろうなと思いながらいつも見ています

[@アンチョメとキャンチョビ]

キタァ〜！総集編！待ってました！

[@竹内吉行-i3s]

今回も感動ものでした。有難うございました！是非これまでの作り上げた作品の個展をお願いします！実際に近くで見てみたいです！！

[@BarricaG]

Congratulations on such a great model. Beautiful workmanship and technique.

[@bluephantomtetra]

ニュータイプしか乗れなそうなマシンに見えますね もとのカラーでもそういう雰囲気のバイクなのに 造形がより際立って、スーパーマシン感もスーパーチャージされてます

[@nightcrow6965]

お疲れ様です。 最初から見ていたので、まあ軽く流して完成のとこだけじっくり見ようと思っていたのですが、通しでガン見してしまいました。 毎度月並みな賛辞で申し訳ないのですが、素晴らしいです。 実車と見紛うばかりのクオリティ。 徹底した拘りには敬服するばかりです。 900Rの総集編も楽しみです。

[@HapticzRotMG]

What is the piece of wood you are sticking parts to? That looks incredibly useful.

[@kenji-plasticmodels]

What minute does it appear in the video?

[@HapticzRotMG]

@@kenji-plasticmodels A few places, you used it at 9:30 on the turbo, and what amazed me was how you secured the cover at 14:40. How did you do it? Is it simply double sided tape?

[@kenji-plasticmodels]

Okay, this is just pieces of wood (offcuts) pasted together, and the parts are attached with double-sided tape.

[@smolbodybuilder1602]

Wow this is really the best i've seen! I start with scale models too and wanted to know what airbrush and compressor can you recommend for motorcycle and car models.

[@kenji-plasticmodels]

I think it's okay if you look at product reviews and choose the one with a good evaluation. I think the airbrush should be 0.3mm with double action at first.

[@smolbodybuilder1602]

@@kenji-plasticmodels thanks I will watch out for something. What do you currently use?

[@kenji-plasticmodels]

The airbrush is 101 of Olympus, 0.2mm of GSI Creos, and the compressor is L7 of GSI Creos.

[@久寿軒真左繁]

素晴らしい!これは素晴らしい！

[@美術教材作業集]

所作が美しいです。

[@daimor1544]

ただ一言、素晴らしい。

[@keisukenotsu8521]

ななな「まな「 「ま

[@shawng7902]

your masking techniques are really impressive. Those valve cover bolts really impressed me. Zoomed in that far they have to be perfect to look good and you killed it! I don't know why but hose clamp bands add so much detail for me. They even showed the clamp deformity on the boost tube for the intake. That is amazing. This model detail-wise is as good as I have ever seen before.

[@kenji-plasticmodels]

Thank you for watching the details😃

[@davidh3858]

Love the hour plus builds, keep'm coming🏍

[@spaeron]

I am positively awestruck. Thank you.

[@schrodingerscat1863]

Every single one of your videos is true artistry, insane levels of detail and skill on display.

[@Reddog08]

So glad we live in an age of technology where you are able to share the beauty of your talent with the world. Awesome attention to detail. You are amazing

[@kenji-plasticmodels]

Thank you, it's interesting to see various things around the world on the Internet.

[@elanalau8948]

Where did you get the idea to change the color?

[@bluesoul8117]

あんたぁ鬼だよ！　モデルの鬼だぁ～。(笑) その上このダイジェスト動画、まるで映画じゃないか、とうとうモデル製作だけじゃなく動画編集まで拘り始めた。 もう正座しないと観れなくなりそうだ、BGMもいつものと変えて来てるし、GPZ編も楽しみでしょうがない。 お疲れ様でした～、次回作も楽しみにしてます。

[@dipling.pitzler7650]

Fantastic work, but why a Kawasaki in Yamaha colors? And yes, I know that white and red symbolises luck in Japanese mythology but these colors are specially linked to Yamaha company.

[@kenji-plasticmodels]

nandemo-seisaku.com/wp-content/uploads/2023/01/hondasuzuki-redwhite.jpg The red and white coloring is not linked to Yamaha's image. Both Honda and Suzuki have red and white coloring. The Japanese flag is white and red, so it's not strange.

[@5phutsangtao-iQ]

you are very creative

[@els46]

Incredible build 🔥🔥🔥 Where is the mirror film used for the fork stanchions from?

[@kenji-plasticmodels]

It is Hasegawa's Mirror Finish, Thanks!

[@els46]

@@kenji-plasticmodels ... Amazing, thank you 😘

[@川本隆史-s7x]

最初、フレーム赤色⁉️って違和感あると思っていましたが、出来上がるとしっくりくると言うか、センスがいいです🎵　流石です☀️

[@Adz456]

You are a master builder 👏

[@kenji-plasticmodels]

Thanks!☺️

[@trc1973]

プラモ系KZbinrの動画を片っ端らから拝見してますが、間違いなくガチ勢のお一人だと思っています。

[@musumeshima5202]

世界1位かと存じます。 この方は私も尊敬するモデラーの一人です。 自分もその辺のプロモデラーに負けてない自負がありまして少々やるほうですが、この方にはかないません。 工作のセンス、塗装のセンス、太陽系で１位かと思います。

[@hminamitom1]

技術が凄すぎる！ディテールのこだわりが。。。時間を忘れて見終わった

[@elkysunnykuri]

所々、思わず息を止めてしまいます。今仕事で自分では造る時間が無いので、自分で造っている様な気がして(勿論此処まで凄くはないのだけけど）楽しかったです。

[@didierpernin5207]

very good work The model is beautiful .congratulations . Greetings from FRANCE

[@kenji-plasticmodels]

Merci!

[@normroter633]

Absolutely stunning craftsmanship ❤ Bravo🙏

[@kenji-plasticmodels]

Thank you!!

[@アキヤマタカノブ]

動画で素晴らしい作品を見るのも勉強になっていいですが、どれだけ稚拙でも自分の手元に3Dモデルがある喜びにはかなわないと思います。 　この動画を見て、モチベーションアップして自らの作品に向き合っていきます！

[@jefferychow1099]

Does plastic cement actually work against lacquer painted parts?

[@kenji-plasticmodels]

It sticks better if you scrape off the paint only on the adhesive surface.

[@AI.art.Tiz001]

なんでもさん、細部の作り込みには、只々驚かされます。 細かな作業されてる時はやはり何故か私の方が息が出来ずに緊張しながら見てましたよw あっ、確かインドの方で同じ模型で、メタルパーツを使用して作られてる方がいましたよ。 チェーン等をメタルパーツで超〜細かい作業で、その方のコンテンツも素晴らしいですからお勧めです👌 イヤ〜凡人の私には作れませんorz

[@taketoohtani6202]

The pinnacle of plastic model building. No one can match his skills and tenacity to build perfect models.

[@kenji-plasticmodels]

Thank you. But there are many more people who are good at it😅

[@charlesdavis9937]

Wow. Beautiful work. I’m switching back to cars and motorcycle models from military models.

[@toluohspringwater1037]

作り込むべき細部と簡略しても良い部分の判断、工作による効果の判断レベルと加工手順、造型精度がまぁ凡人の私には何かSFファンタジーを観ているような、そんな気分になりました。

[@jetpack5]

Mķpppp0pppp⁰ò plop òk ppl

[@jetpack5]

5 55566665

[@jetpack5]

5 5 5

[@stacc_962]

Che meraviglia! Complimenti per la cura dei particolari.

[@godfatherofphil]

Hi Nandemo, once again you did an amazing job, the build looks so realistic, i enjoyed every episode. Your skills are fantastic👍 I am a great fan of your Channel

[@jcsrst]

Nicer than the real thing! Absolutely the most skilled model maker on KZbin! I can't even watch anyone else make models! Stunning!

[@karl53133]

Excellent work and finish....

[@kenji-plasticmodels]

Thanks!

[@PBRCN-br5sv]

so weird to rewatch it in full, seeing the unboxing and thinking oh you started from a normal kit! amazing....

[@cemdrahsan270]

Dear Master, do you have any plan to built Meng H2R 1/9 scale?

[@kenji-plasticmodels]

I'm building a Yamaha YZR500 right now.

[@mjlitratista3346]

very generous on sharing step by step. Very informative for a beginner like me. thanks for sharing

[@kenji-plasticmodels]

I am very happy if this was helpful. Please watch the other videos!

[@samtu5862]

It's so enjoying to watch you put this kit together 👍👍👍

[@kenji-plasticmodels]

Thank you! Check out my other videos📼

[@samtu5862]

Definitely will do

[@ryo-tea9197]

感動しました。 凄いなぁ、、、

[@blumidgetgaming6883]

how long is ur fuse dude i dont have the patients to go to this much detail when i build models

[@神崎川一太郎]

買いたい！！ 芸術！！

[@rcpete7055]

Beautiful 👍 good skills..

[@kenji-plasticmodels]

Thank you👍

[@manoman0]

That's the kind of feeling when you get in your Toyota and you turn the key. You just know it will do well.

[@Noobie_ZACO]

本物の変態ですね！尊敬します

[@Builtbyronny]

Thank you for sharing your great work greetings from Norway 🇳🇴

[@Zskilledfeam]

I wanna ask some question,if the white part is gaia ultimate white(003),then what is the red color?

[@kenji-plasticmodels]

The color of the red part is "Silk Red" of Finisher's.

[@Shaggydishi]

I want to be like you when I grow up!!! :) Awesome work!!!

[@kenji-plasticmodels]

Thanks!!

[@attackheart-uw6bj]

素晴らしいですね魅入ってしまいました。できればサイドスタンドは強度のあるものに 新造した方が良いかも…

[@kenji-plasticmodels]

ありがとうございます。 完成後何年か経ち、先日持ち運びをして飾りましたがまだなんともないです👍

[@cemdrahsan270]

Dear Nandemo-san thank you very much I learn a lot.. and I boomed the warehouse of HLJ:)

[@MuazzHanapi]

can u make Honda CBR 250 year 2021?

[@kenc1547]

Hello, why did you use acrylic paint instead of enamal for the wheel? Thank you

[@kenji-plasticmodels]

Hi😃, I don't really like enamel paint because it comes off after repeated touches.

[@kenc1547]

@@kenji-plasticmodels i agree, thank you for answering :)

[@kenc1547]

@@kenji-plasticmodels My follow up question is if I paint MR hobby Topcoat on top of Tamiya Acrylic, will it damage the acrylic paint? Thank you

[@kenji-plasticmodels]

There are two types of The Mr.hobby Topcoat, solvent-based and water-based. If it is water-based, you can coat it on top of Tamiya acrylic, but not solvent-based.

[@kenc1547]

@@kenji-plasticmodels thank you

[@渡邊烈]

完成おめでとうございます㊗️ あらためてズゴイバイクだ！ 現代のサイクロン号だ！

[@Zddcffggfgv]

Thanks for the subtitles, love this channel!!!

[@santaklaus2489]

Красота. Смотрю и наслаждаюсь. У парня золотые руки.

[@sierrahobbys1883]

That's very impressive work and the color scheme looks a lot better than the original colors. I like how you modify the chain, that looks like a very handy tool to have and you could save a lot of money not buying after-market chain sets.💯💯💥

[@kenji-plasticmodels]

Thank you! Digging the chain is very difficult but worth the challenge👍

[@RR_1138]

How does the model kits scale w Maisto, and how does it scale w 6 inch GIJoe and Marvel Legends ? Thanks

[@kenji-plasticmodels]

1/12 scale, so it matches 6 inch figures

[@ramanjeet1111]

how do u apply glue to such models...is it mentioned in the instruction booklet

[@kenji-plasticmodels]

The instruction manual only mentions where to use the adhesive, but you can buy the adhesive for the plastic model and use the brush attached to the cap.

[@ramanjeet1111]

@@kenji-plasticmodels thx for replying, am using a general glue to stick the model parts......is that ok

[@rodgercox2770]

Where can I get mirror finish sheets for models from

[@kenji-plasticmodels]

amazon amzn.to/3Ii5397

[@jamesfield5346]

I wish I had your ability and creativity. You do amazing and beautiful work. I do not have the patients nor knowledge.

[@kenji-plasticmodels]

Thank you. I'm just doing it slowly and slowly.👍

[@RatulGhosh89]

Absolutely amazing! Kudos to your hard work and keep it up!

[@nickpanico5441]

I would like to thank you forr your video . you have a great passion for detail . Thank you for sharing !!

[@kenji-plasticmodels]

Thanks!

[@まろまろカリス]

カッコ良すぎやんこのカラー

[@mabulblue]

素晴らしすぎる‼️ プラスのネジのところはヘックスにしたいと思うのですが小径のヘックスって無いんですかね？

[@kenji-plasticmodels]

ネジあたまを隠すのはいくらでも出来るのですが、このときはあえてプラモだよというのを残しました。

[@ModelCarHobbyist]

I can't wait to build one of those kits. I'm pretty sure that I'm not going to be building new parts for it though. My skill level isn't there yet. Amazing work!!!

[@philippeleleu4730]

Beautiful work i would like to do the same quality with my model Your French Admirator

[@manjago9821]

Yes you can..if you're the person who can negotiate with the very little tiny thing in making something like this one

[@bucingaming2459]

dari indonesia ikut hadir nyimak video ini 😇 sangat kreatif dan detail banget. i like it. lanjutkan kreasinya brother.

[@kenji-plasticmodels]

Banyak orang dari Indonesia yang menontonnya karena suatu alasan. Terima kasih! 😊

[@SomeGuyInSandy]

You nailed every texture, and material color. This is easily museum quality work! Thanks for the great videos! They have been great to watch, and I am looking forward to more!

[@kenji-plasticmodels]

Thank you! See also the next video!

[@MrGardman]

Very nice touch with the aluminum tape or foil. Great detail work

[@kenji-plasticmodels]

Thanks!