Thank you soooo much for showing a shortcut! I've watched a handful of videos that seem to make it more complicated or extra steps. And thanks for the detailed explanations for this newbie!!
@genalipscomb25965 ай бұрын
I am so new at this. Your tutorial is wonderful and so easy to understand THANK YOU
@aseal551111 ай бұрын
This is the 10th video I've watched and finally understood how to keep the card the size I wanted it, and the first video I've understood "the how to" make an edge card. Not even the Cricut "how to" videos helped. THANK YOU FOR MAKING IT SIMPLE - EASY! ♥ ALMEDIA.
@jilldavis50077 ай бұрын
I just used this tutorial to create the cutest Valentine's cards! Thank you!!!
@phyllis610 Жыл бұрын
Excellent instructions. Phyllis in Virginia, USA
@MDLady19656 ай бұрын
Thank you! I've watched so many people do it so much harder! I knew slice was the way to go. Excellent!
@ceejay13203 жыл бұрын
OMG, you are amazing, you taught me so much in this video and not just the card!! Alignment, contour, how to do back to back without trying to match it up, you are the bomb!!! Thank you so much for all of this. and the card is AWESOME!!!
@K-Fred Жыл бұрын
I just discovered your page. For whatever reason I totally get your style of teaching and explanation. Thank you!!!
@Judy92482 жыл бұрын
I am so happy I came across this video and I am thankful that you shared your knowledge. You explain this so clearly as I was looking for something different to make my Valentines cards. I want to thank you so much for your generosity. Happy and healthy New Year.
@cathyr79013 жыл бұрын
Thank you. As others have said this is a very easy but detailed tutorial. I know I will refer to it again. This group is so generous with their knowledge and I am grateful.
@gsdmama22 жыл бұрын
Hi Narelle, I have watched several videos and found yours to be the most easiest to follow. I came from Tamara's you tube channel that was suggested on my feed as I was searching for new card folds.
@zoedoodle98242 жыл бұрын
Thank you for that. I recently watched Tamara's tutorial and while it was a bit easier than the others I've seen, the technique is still imprecise and fiddly. I knew there was a way to do it this way and began to play with it but didn't have the patience to figure it out. LOL. Thank you for all the work that it took go through the trial and error of figuring it out for me!
@Britgirl582 жыл бұрын
Fantastic tutorial - nothing missed, not one smallest of details. Easily understandable. Thank you!!
@girlmisty23 жыл бұрын
Great tutorial, Narelle! I can't stop making Over the Edge cards, they are so fun! Thank you so much for sharing your expertise using Cricut Design Space. I'll be sharing your tutorial and also the link to your group in my group so everyone can learn and have fun too. Thank you again! You're the Best! Misty
@thenoncraftycrafter3 жыл бұрын
Thanks Misty. They’re so much fun to make! :)
@tracybridgens4288 Жыл бұрын
Thank you much for sharing your project and your ideas! This is great! I'm also thrilled to have found an Aussie crafter to follow! You have my heart!
@deanneb50393 жыл бұрын
Thank you, Narelle. Your tutorial is very easy to follow and you explain everything so well. You have taught me a different way to make the Side Edge cards which I am eager to try now. I think using the Slice tool, as you have done, will make it a bit easier to create the card base and layers.
@jodisteuber39453 жыл бұрын
Very helpful! Thank you for taking the time to show the process and suggestions!
@teresacrawford56512 жыл бұрын
This is a great tutorial! I've watched a few others on this subject and by far, yours is the easiest to follow and execute! Great job!
@gramme5963 жыл бұрын
You instructions are very easy to follow, thank you for putting this together!! Such cute cards, I am excited to make some.
@carolynfisher89183 жыл бұрын
Thank you Narelle. Your tutorial is Amazing. You take the time and explain everything so perfectly. Tomorrow I will watch this again and try and make my own. Thank you again.
@CandiB307 Жыл бұрын
Perfect! Thank you for this. Great instructions.
@denisesandulak5794 Жыл бұрын
Thank you so much for making this video. Now this makes total sense and I actually made a card!! Best Regards from Canada
@doriskilbane60893 жыл бұрын
You showed just what I wanted to learn--side edge cards WITH DOUBLE OFFSET! Now I need to know how to make side edge cards of the A2 size: 5.5 tall by 4.25 wide.
@thenoncraftycrafter3 жыл бұрын
You would make them the same way. Start with a rectangle that is H5.5 X W8.5 with the score line at 4.25".
@doriskilbane60893 жыл бұрын
@@thenoncraftycrafter ok. Thank you.
@sandravavonese65652 жыл бұрын
Thank you! I’ve been struggling with this concept as I am trying to create escort cards with the design edge on top. I can’t seem to get it to work but your video has inspired me to try a workaround with your tutorial! I just joined your Fb group!! Thank you again!
@anthonyaustwick41652 жыл бұрын
Thank you for this video! I have been trying to work out how to do this for a long time. Really good presentation, clear and easy instructions
@pigeonpair67963 жыл бұрын
Great tutorial Narelle! Thank you so much for taking the time to do it 😊
@Mizowi753 жыл бұрын
Thank you so much! You really explained things well and I can't wait try this technique! Additionally, thank you for the map in finding the files in the group! I struggled with that while I have been searching for files.
@surgicaltechcrafter21692 жыл бұрын
Fabulous tutorial. Thank you
@TheSuzyfick2 жыл бұрын
Hello from Illinois, thanks for sharing your inspiration. These cards are wonderful.
@betsycecconi13613 жыл бұрын
Thank you so much, can't wait to make a few of these for my grandkids..you explained everything so well :)
@donnabischof97973 жыл бұрын
This is such a great tutorial! Thank you for taking the time to help us.
@lorifrease57073 жыл бұрын
Thanks so much, just designed my first side edge card. Great tutorial.
@Knkchihuahuas3 жыл бұрын
Thank you for such an easy to follow tutorial
@lindanielsenthecraftyshesh70532 жыл бұрын
I love this tutorial! You made it so easy to do! Lot of steps but I want to do one. Thank you so much!
@cherylwood14543 жыл бұрын
Thank you so much for this video Narelle! I'm going to try to make a card now.
@alainegrieser2 жыл бұрын
You are amazing! Thank you for all you do to enrich my cricut crafting obsession!
@scottmaryannelewandowski51063 жыл бұрын
Excellent video - very easy to follow along! Thank you!
@freedomofreligion32482 жыл бұрын
Super finished tutorial, excellent help, thank you!
@berryparker2 жыл бұрын
excellent tutorial . Thank you
@stacyjones2003 жыл бұрын
Wonderfully creative video. Can't wait to try this. Thanks so much 😊
@vickynollam88312 жыл бұрын
Thank you for a very clear video on this technique, that I will use going forward. I have looked at the other video you linked, unfortunately it is in German.
@gailphillips20322 жыл бұрын
Such a well done tutorial. Thank you very much
@dbustard98253 жыл бұрын
Awesome video!!! Thank you for taking the time to make it! 👍🏻👍🏻
@rondasheive42803 жыл бұрын
This video was so good and so easy to follow. Thank you
@carlagross71823 жыл бұрын
Thank you for this amazing tutorial. So informative.
@debbieesterline64913 жыл бұрын
Wow thanks so much so easy to follow and learned some new tricks !
@janiceforest4082 жыл бұрын
Thank you, very helpful
@lisarichbourg47963 жыл бұрын
Thank you so much for this detailed video....I’m going to try this today!
@debraparker97043 жыл бұрын
Thank you so much ! you have the best video going !! I finally know how to make some nice cards without pulling out my hair lol! again Thank YOU!!
@vnlindsay2 жыл бұрын
Great tutorial!!!
@debjohnson73893 жыл бұрын
Thank you!! So easy to follow your instructions!
@pokii94773 жыл бұрын
This is such a great easy seeming tutorial. Thank you!
@kimlee31363 жыл бұрын
Love the video so easy to follow! Thank you!!
@jackieg25453 жыл бұрын
Fantastic tutorial as usual, thank you :) After all these years how did I not know about the members projects album? haha I've shared a few of my cards there now.
@cindymcfarland54993 жыл бұрын
I enjoyed this tutorial very much Thank you
@teresagarber33613 жыл бұрын
Love it. Great tutorial. Thank you.
@barbarakirshner98663 жыл бұрын
This is a great tutorial. Thank you so much 😊
@conniesobczak21773 жыл бұрын
Thank u great tutorial
@starlit-hw65232 жыл бұрын
Great instuctions.
@ginettelegendre40243 жыл бұрын
Super et tu l'as bien expliqué. merci beaucoup j'aime beaucoup!
@nanataylor94653 жыл бұрын
I love these!!! Thank you
@lauradavidson53752 жыл бұрын
Thank you for the wonderful tutorial... I am following along now and I have my two offsets done. When I press on the offsets the contour button does not go bold so I can't do that.. I am not understanding why
@thenoncraftycrafter2 жыл бұрын
The Contour option will only be available if there is more than one contour. If it’s just a solid shape you can skip that step. If you need more troubleshooting help feel free to tag me in a post at facebook.com/groups/cricutexploreandmore with a screenshot of your project. 🙂
@lyndahollins2881 Жыл бұрын
I have watched the video from start to finish 3 times now, but how do you get the icecream to look the same when making the card please. do you have a tutorial on card making?
@jeanettenewman4789 Жыл бұрын
Wanting to add waves to the border of cards or other edging designs. Any ideas from Cricut?
@AliciaWag3 жыл бұрын
Hi Narelle, & thanks for this tutorial! I just have one question. When you make the double side edge card, & you make 2 squares to put inside of it, wouldn’t you have to make them thinner, in order to not stick out beyond the edge of the card? When I’ve done this, I just put a square over the one side of the card, unlock it, & size it by eye, so it won’t stick out. If you have another way to do it, I’d love to know! Thanks again. 🙂
@thenoncraftycrafter3 жыл бұрын
I did forget that bit in the video in my rush to get it recorded. You do indeed need to make the inside pieces shaped the same as the card base. You can use the original shaped piece and use the offset button but make them insets by using -0.125. 😊
@janetmenchyk97782 жыл бұрын
the two inside papers, where are they suppose to go since they don't fit the card?
@joanfricker2 жыл бұрын
Joan Fricker 0 seconds ago Your tutorial was great. I do have a question though...when I close the card the bottom shows behind the cut out image. Is it supposed to? I only cut one side.
@thenoncraftycrafter2 жыл бұрын
Yes, the only way to avoid that is to make the back shaped as well.
@jeanrenard17303 жыл бұрын
This was a very good video, and a project I wish I could make, but......my "offset" feature does not work, and Cricut has not yet come up with a fix for me :(
@thenoncraftycrafter3 жыл бұрын
Are you using a PC running Windows 64 bit? If so, have you tried downloading and installing this: aka.ms/vs/16/release/vc_redist.x64.exe It doesn't work for everyone, but has for many.
@lyndahollins2881 Жыл бұрын
Thankyou, I am very much a newbie Cricuter and wanted to know how to use the slice and contour. but how does the main image apear on the cut card?
@thenoncraftycrafter Жыл бұрын
The main image is cut seperately and adhered to the front of the card.
@thenoncraftycrafter Жыл бұрын
The PDF might be more helpful. u.pc.cd/GhuctalK
@catherinepci75942 жыл бұрын
Using the offset behind the image at the end of each project, is that just a design choice or does it serve a function? In other words, can you just place the flowers or ice cream directly on the card or do you need that offset shadow piece? Thx.
@thenoncraftycrafter2 жыл бұрын
It’s totally a design choice.
@suewilson6835 ай бұрын
this is great. i'm trying to get to tamar's video but when i press the link it says' not found '
@thenoncraftycrafter5 ай бұрын
Try this link: www.cricutambassador.nl/?p=934
@BeverleighscraftychaosHQ2 жыл бұрын
Great video I can’t find your group though xx
@thenoncraftycrafter2 жыл бұрын
Hope you found it. 🙂 facebook.com/groups/CricutExploreAndMore
@akarph2 ай бұрын
I want to join your group! But please tell me where to get the embossing machine. Thank you!
@thenoncraftycrafter2 ай бұрын
There are many different embossing machines available. Here are some options from scrapbook .com. shrsl.com/4kel0 # ad. Look for one that has at least a 6" wide opening so you can use larger embossing folders.
@akarph2 ай бұрын
@@thenoncraftycrafter thank you! I designed my first card using your technique. I do like it better.
@carmenbyrne40883 жыл бұрын
That’s amazing ! Would you by any chance know how to do this on a Scan and Cut please? Thankyou
@thenoncraftycrafter3 жыл бұрын
I’ve never used the Scan n Cut software as I don’t have that machine. If I can download it without owning a machine I’ll have a play and see what I can come up with.
@thenoncraftycrafter3 жыл бұрын
I've had a play and while I've worked out the basic steps, I can't get consistent results. So it will take me longer than I thought to do a tutorial. I am working on one that shows the process in Sure Cuts a Lot and saving as a SVG. I believe that SVG's can be imported into CanvasWorkspace.
@carmenbyrne40883 жыл бұрын
Thankyou so much,sorry I took so long to reply, I didn’t realise you replied. An svg would be amazing! Please let me know of cost. Thanks again xx
@jonibates70253 жыл бұрын
Are the images print then cut? Love this!!!
@thenoncraftycrafter3 жыл бұрын
I have used some layered images and some print then cut.
@judipalmer84352 жыл бұрын
I can’t understand a word of Tamara Tigchelaar’s video. Can it be translated?
@deanneb50392 жыл бұрын
I am very grateful to Tamara for first bringing side edge cards to my attention but having tried both Tamara's method and Narelle's method of making these cards, I think the way Narelle makes them is so much easier. I recommend that you just follow the steps that Narelle walks you through and you will be successfully making side edge cards in no time. 👍
@jonibates70252 жыл бұрын
Wouldn’t the squares on the inside show when you fold the card?
@thenoncraftycrafter2 жыл бұрын
You can make them smaller if you like so they don't show.
@meleagoins59162 жыл бұрын
Where can I find the envelope to fit this card?
@thenoncraftycrafter2 жыл бұрын
In the Cricut Explore, Maker and More Facebook group in the album called Envelopes.
@rebeccamacgown85003 жыл бұрын
When I put in 0.125 the off set does not work. If it put in 0.25 it does ?..
@thenoncraftycrafter3 жыл бұрын
Not sure why that would be happening Rebecca. Do you not see an offset if you select .125”?
@rebeccamacgown85003 жыл бұрын
I shut DS down restarted my computer and now it works. Made 6 side edge cards today. Thank you for your video.
@thenoncraftycrafter3 жыл бұрын
Great! :)
@jonibates70252 жыл бұрын
Tamara’s video is in German?
@thenoncraftycrafter2 жыл бұрын
Yes, I believe she's from Germany.
@awkwardartist76282 жыл бұрын
It says easy but it's not
@jilldavis50077 ай бұрын
I just used this tutorial to create the cutest Valentine's cards! Thank you!!!