Negative Airsoft Vs Bedroom Techs

[@addams92]

The moment I saw that drill in the frame I knew, this is gonna be a good video.

[@Tinblitz]

Didn't stick the drill through his hand, 7/10

[@mercsoul1]

I’m not sure I’ve ever seen anyone take 6 minutes to say “fuck off” But it was a thing of beauty.

[@RealNomadicus]

Thats the brittish for ya

[@andressergio1532]

pro trick : you can watch movies on kaldrostream. Been using it for watching loads of movies recently.

[@josephzayd9831]

@Andres Sergio yea, been using Kaldrostream for since november myself :D

[@carterazariah4000]

@Andres Sergio yup, have been watching on KaldroStream for years myself :)

[@mercsoul1]

@@andressergio1532 you should watch the first 6 minutes of this video for my answer to that.

[@mattlilley]

I'm no bedroom tech!!!!... My wife doesn't bitch about her dining room table for nothing.. LOL

[@hal752]

Yeah I started using the downstairs table. However that ended when a spring shot itself across the dining room and into the kitchen. Relegated to the bedroom now.

[@sethmorton6372]

Kitchen techs ftw

[@mattlilley]

😆😆

[@Plain_Delta]

@@hal752 how ware w

[@hal752]

@@Plain_Delta wut?

[@danielk9906]

I just lost it, when you drilled a second hole, just like my machining teacher... "You can put drill holes wherever you like, they dont really weaken shit, you know archway law..." (Its a crude translation, if anyone is mad about it, ill tell you in hungarian)

[@yorhaunit8s]

To be honest, I often see your videos and channel being recommended on reddit. Hell, I am here because someone on reddit said this is a great channel about teching airsoft guns.

[@someonesuperrandom4194]

Yeah Cards32 (his yt channel) is u/houseofcards on reddit. He’s one of the best knows guys on r/airsoft and he constantly recommends negative.

[@tazthedevil22]

Yes. Same here

[@jediknight1294]

He's talking about the tech specific reddits

[@BIGBIRDSAIRSOFT]

I’m technically, a walk in wardrobe tech, although it is attached to a bedroom.

[@spaceinaspace8452]

"He'S DoInG IT AlL WrOnG!!11!!" - Airsoft Reddit.

[@OctaneGroup]

Most of the people on r/Airsoft like negative airsoft idk what these guys in the comments are going on about

[@janzugic6798]

@@OctaneGroup exactly

[@jediknight1294]

​@@OctaneGrouphe isn't talking about r/airsoft there was and may still be a tech reddit that was for a long time the worst side of sites like asm

[@carlomcdy]

Pretty happy when you brought out the MP5 lower. As I was thinking of that exact same thing when I started to work on my ICS MP5. "The method that everyone says to use doesn't work because I can't see shit."

[@malcolmgough9971]

@@MegaChickenPunch Just use the same method you would use on the AR. Shim it against an AR grip (you can check the angle with a Maekiii alignment too to verify it lines up correctly). Although you can't set the shimming with the MP5 lower, you can use the left half of the shell to set the motor height after you've shimmed it against the AR grip. Once you've finished assembly you might need to set the motor height a quarter turn one way or the other, but nothing significant.

[@Gr1m_laden_7]

But if I didn't do all my tech-ing in my bedroom, I'd have to socialise with the family 😬

[@cre8tiveuniverce788]

Help me with my piece of shit

[@Gr1m_laden_7]

@@cre8tiveuniverce788 I think that's what toilet paper is used for to be honest

[@ChArLie360115]

@@Gr1m_laden_7 underrated comment my guy

[@rabidkyle6181]

I was half expecting a mini desktop Henry Hoover to be used instead of a brush.

[@reqreflex2106]

Always a good day when Negative uploads

[@ArchieKeen1]

I am a tiny bit saddened a beautiful TM v2 gearbox was harmed in the making of this video but if it’s fucking with Reddit it’s worth it

[@a4266]

KMFDM and Negative teaching the internet together! Puts a smile on my piehole!

[@saintpeddlesworth2706]

Listening to you shit on little bedroom gremlins with KMFDM playing in the background is just *MWAH* love it

[@perkyspewpews7302]

"im just going to have a little fiddle with it..." *proceeds to pull out massive drill bit....*

[@c4boos386]

As an English Teacher in Training I always try to imagine how I can integrate your artful way of teachin into my efl classroom... Love from another german wannabetech

[@mitch3384]

Man that's showing our age.. I remember having the Mortal Kombat soundtrack as a kid and loving Juke-Joint Jezebel. Also introduced me to Napalm Death, that track is still my favorite from them.

[@davidking6594]

Just remember to bevel those holes for maximum grease/air ratio. 😂

[@Asomodai]

Not sure if you did it off camera, but I stick the motor into a plastic bag and make a hole for the pinion to poke through when cutting or shaving to prevent metal filings going into the can.

[@worthshowing]

I liked how he didnt edit out the brushing part just to fu*k with us, as he could easily edit it out... british humor :)

[@NegativeAirsoftTech]

I love jokes that waste the viewers time. It's Peter Griffin rubbing his knee after a fall.

[@martyguy8185]

Its not that British.....id do the same in the same aspect if ita the joke. Its all on the delivery;) bravo

[@willspencer8694]

@@martyguy8185 its british fam

[@Exilninja]

To be fair, the airsoft Reddit doesn't really like anyone or anything except M4 pictures.

[@Edward-pw6zz]

true

[@louhis7158]

True

[@louhis7158]

@Petr Stelford WTF 😂😂

[@Naomi_tv27]

Lmao VFC die hard fans😂😂😂

[@chost-059]

And feet

[@mpoT3CHY]

proud bedroom tech here. i simply work on my own shite and be open to any tech methods. thanks to luke here, ive learned aoe correcting isnt as holy as people say it is. and also rhop. just slap a maple leaf in a cyma and wreck the whole field

[@i-_-am-_-g1467]

First time I've ever heard of anyone drilling their GB shell for shimming

[@snakedoctor8744]

I knew this video was going somewhere, and you did not disappoint. Im currently rebuilding a gearbox for practice using everything you have been so generous to share with us. You are the standard 👌

[@simoncereceda4908]

Casillero del Diabloooo! nice wine you got there greetings from Chile

[@johnlewtas6833]

luke, your internet shim job is perfect, except you forgot the step where you just brush all the metal filings directing back into the gearbox shell.

[@YEinherierY]

I never understood why people drill holes inside their gearboxes, especially on AR's. Just put the motor in the grip and screw the motor plate on. Put the bevel into the right side of the gearbox case, hold the grip with the motor flush to the casing and adjust the motor hight. You can literally see everything. Shim the bevel to the pinion and thats it.

[@mr.airsoft8295]

Yup. That's the half-shell method.

[@YEinherierY]

@@mr.airsoft8295 I didn't know it has a name. I do it because it's common sense.

[@mr.airsoft8295]

@@YEinherierY The TheAirsoftTech was the guy who popularized the idea and he may have actually been the one that coined the term. But yes, I do agree that it is common sense and that's why I use the half-shell method as well.

[@andrewgreentree7792]

I like listening to your videos while I do my tech jobs and I got a notification and as soon as I saw your title I started getting scared. How does he know I'm working in my bedroom? Is he watching me? I don't feel safe anymore.

[@NegativeAirsoftTech]

(taps the window)

[@andrewgreentree7792]

@@NegativeAirsoftTech if only mate I could really use your help roundabout now

[@louhis7158]

Same, I was scared too

[@louhis7158]

@@NegativeAirsoftTech 🤣👌

[@PoisonedFaith]

I got a used MP5K where the previous owner had drilled out part of the damn lower frame to "ensure proper fitment between the bevel and pinion." I'm still looking for a new lower. Same guy also used mismatched the piston head and cylinder head, which caused the cylinder head to bow outwards, causing a hairline crack and leaking about 60 FPS.

[@Fearisthemindkiller617]

“mommy i cant do my homework right, i gotta deal with this guy from england!” 😂😂😂

[@Whiskey11Gaming]

The reason why the 7.4V and 11.1V have effectively the same ROF and trigger response is because of the max current they can produce. I can't see how many C the batteries are, but I'm guessing the 7.4V was an 850mAh 20C battery (about 17 amps max current) and the 11.1v 1100mAh was probably a 15C (16.5 amps max). The motor is asking for more current and it isn't getting it. This caps the amount of torque the motor produces and negates the higher voltage's "increase" in speed. If you compare a 7.4V 20C 3000mAh LiPo to an 11.1V 20C 3000mAh LiPo the difference is VERY evident. Both can supply enough current to max out a motor's requirements on most sane springs. That means the voltage can actually play a difference, and the 11.1V will start to show faster ROF and speed.

[@DartzIRL]

Those are speedholes, they make the gears spin faster and help with thermoregulation and lube oil flow.

[@Tom_-]

Spur gear shimming is the old school way of doing it and works just fine.

[@Plain_Delta]

As someone who nows fuck al- I mean, nothing about working on Airsoft Guns, I have mad respect for you lad, mad mad respect.

[@GamBodia84]

"I work on everything so why dont you fuck off" made me piss

[@firstnamenonapplicable5138]

If his tech work was shit nobody would pay him to go work on their gun

[@jediknight1294]

I mean patrol base still get tech work customers so not sure that's a great metric

[@wishdeus]

I'm working on a jg mp5 and as you were starting drilling the hole I was like well that wouldn't very well help me and sure enough good guy Luke drops the knowledge lol.

[@alienlobsteroo4882]

I prefer working on everything as well as broken stuff. Broken stuff is mostly old stuff. Old stuff wasn't as optimized as it is today. Which means that I need to learn 3 different ways to do 1 thing. The more exotic/rare the weapon the more trouble. If you only do yourself some DSGS and TSGS I don't consider you a tech.

[@937Uhbie]

I've gotten some really helpful information off reddit, but i still love your vids 😘. Greetings from switzerland🇨🇭

[@iammrbadguy9706]

Helpful? Like what overpriced chocolate to buy?

[@braf7349]

"Bedroom Techs" Turns around to see my bed from my work table.... well shit.

[@opairsoft8100]

Literally exactly what I was thinking as I look at my work table right near my bed.

[@louhis7158]

Me too lol 😂

[@NegativeAirsoftTech]

@@opairsoft8100 Can you see your ptfe tape & failed r hop patches? Lmao

[@opairsoft8100]

@@NegativeAirsoftTech irony is, I don’t use ptfe tape generally or r hop patch’s. But yes, I can see some of them sadly. There’s a lot of stuff I agree with you about, and some I don’t, but your videos/presentation skills/story telling are just way too interesting to me to ignor, like the video you did when you told that super detailed story about how 2/3 people prefer corn flakes. Watched it again just the other day, and wholy cow you got me into it again even though I already watched the video months back. You have a great skill for story telling and keeping people interested.

[@blackrul3z]

We need those patches !!!!!

[@1denirotv]

Here in Brasil, every tech is a bedroom tech

[@NegativeAirsoftTech]

Porque sair a rua no Brasil e assustador...

[@1denirotv]

@@NegativeAirsoftTech exatamente

[@jeromykorytkowski156]

Love your videos! Bedroom tech that loves to learn new things from your videos.

[@WannabeAChav]

Savage , Rough as F drilling into that new worktop mat 😂

[@electronoob7428]

Congrats on 20k!

[@jasonbaugh111]

Hi mate great video as usual very entertaining, you had me chuckling the moment I saw the drill, great work. Really like your content, keep up the good work, take care have fun and play hard.

[@brandoncaraballo4331]

I fucking love the cleaning break. 🧹

[@Rick_Makes]

I wonder how many of those people on reddit have ever actually shimmed a gearbox and how many have just watched a retailers tech video making it seem like a dark art which is best left to the professionals i.e. send your gun to them.

[@rossding7150]

I appreciate how much you swear, I know I'm no the only one that can't string a sentence together without doing it < unless I'm writing 👌

[@markchappell3063]

Love the vids bud, keep em coming. I suppose you could use engineers blue to see where the gears are in contact with eachother.

[@foznoth]

I mainly come here to be reminded of good music I've not stuck on for ages. Oh, the tech stuff is interesting too. Now to dig out Nihil.

[@ssquiggss]

Not gonna lie I used to do pinion to bevel. But once I started watching your videos and you doing spur to sector first I thought fuck it I'll try that. And I'm happy I did because it's my preferred way to start shimming now. 🤙

[@bestyoueverhad100]

That’s the problem with being a great Airsoft tech...people are always going to have negative shit to say about your work or how you do shit smh

[@josephlinden1630]

Yeah but Reddit is just always wrong about everything.

[@Inquatitis]

That sarcasm got me moist.

[@nicholashead8117]

Fuck the bedroom techs. I start with the sector gear aswell. In my rc days, we put a bit of paper between the pinion & spur gears to get correct meshing

[@kristoffulop8233]

Next time I try this new "method": I'm going to drill holes into the airsoft gun until it starts working!

[@trobins77]

Need one of those patches! Love it

[@darkshock42mlg05]

My ideology is if it works it works. There's sometimes more than 1 way to do things.

[@blythe1331]

Loooool I was just thinking about the mp5 grip and how hard it is to know how your motor will line up thanks for finally addressing that

[@anthonyprioletti7800]

I’ve watched all your videos! I need more!

[@ghostwalkerairsofttech1947]

I've been doing shimming from the spur gear for a very long time now...never had a failure yet as a result...and then tune the motor depth by ear...

[@toekie3352]

love this, hope i can begin my covid project soon. m14 ebr dmr build from a scraped gun but i still need some parts to come in.

[@Azkareed]

KMFDM goes perfect with this !

[@MiguelRamos-fh2ox]

having a rough day and i come home to a new video, much obliged

[@jackdavies91]

My lunch break just got better!

[@dombaker6210]

I want one of those patches!

[@martinjudd1284]

I laughed so fucking hard, it looked like I was crying. How do I get one of them fancy patches?

[@prankstersboneworks]

juke joint jezebel was a good choice. one of my favorites.

[@wishdeus]

They love to tell you how to build it but their gearboxes never cycle properly or they always have feeding issues. Its always one or the other

[@bowlofoatmeal5629]

This my friends is why I hire people to tech for me

[@BatMan-mi1jh]

"Oh deery f¥cking didumns" >< priceless

[@kalm1531]

Does changing the standard innner barrel to a Mapleleaf inner barrel really make a difrencen?

[@NegativeAirsoftTech]

Normally yes

[@sarahshively1858]

The obvious answer when doing MP5' is you gotta drill the same hole in the lower... Duhhh

[@NegativeAirsoftTech]

Of course! Dammit.

[@sarahshively1858]

@@NegativeAirsoftTech no worries bro, I got you

[@totalfailforfun4721]

Holy shit I have an old ICS MP5 and you have opened my eyes holy shit

[@46templar]

Are you sure you wasn't a dentist in another life as my teeth are having nightmere with you and your grinder

[@JimmyTontoeShreds]

Fuck I love your videos mate. Telling it like it is great in my opinion. Keep it up brother.

[@miikkaernamo767]

I just warp my gearbox in a vice until the gears stop spinning and loosen the screws a little. No shims needed.

[@CutlassOutdoors]

Is that the Mortal Kombat soundtrack?

[@vyl-za]

Reddit is for pretty pictures and that is it.. I avoid the comments and discussions like the plague

[@RekzysTheTitan]

I think id rather jump into a pile of plague infected fleas than read comments on reddit

[@ambershangout7226]

I was waiting for you tell them where to shove their comments

[@tswdev]

Or you can spend 10 dollars on a endoscope from AliExpress. Bonus, you can check your barrel, your hopup patches, etc.

[@stubeeson8037]

I WANT THAT PATCH c#$t (because youtube does not like the word that rhymes with C HUNT)🤣🤣🤣🤣🤣

[@robertlees2065]

Watching that and thinking "What is this new age tech bullshit, this won't work with an MP5 or G3 lower" and then the MP5 lower appears :D I'm sure if those extra holes were actually a good idea TM would have designed them in, they may use ABS plastic more than we like, they may have their hands tied by a 1J limit but they definately aren't stupid. Edit : When I say G3 lower I mean one of the G&G one piece polymer lowers, because I

[@ashhaq9482]

I remember this tune from the MK film...sonya v kano

[@briankim1512]

Just an honest question, why not change armatures between those motors instead of cutting the armature? Does changing armatures between motors cause issues?

[@NegativeAirsoftTech]

Taking the motor apart is more hassle

[@AWPtical800]

honestly WRT bevel-pinion bullshit: I use the right side shell only, the motor and the grip. Futz with the shims until the pinion isn't actively pushing the bevel off of vertical.

[@ErnstCreemers]

Is that brush made from your mowhawk? I approve

[@codenamesquash6817]

I just got a new prebuilt gearbox for my first aeg m4 I was wondering when putting it all back together if there are any major no no’s I should look out for? Thanks a ton

[@NegativeAirsoftTech]

Fire ants in your armpits - don't have that happening at the same time.

[@louhis7158]

@@NegativeAirsoftTech 😂

[@jacktaylor4274]

"shit a kitten" 😹

[@cozza1996]

Never fucking listen to the Airsoft subreddit. Wankers in there telling everyone that prowin units are the best things ever lmaoo

[@dainiusvysniauskas2049]

Except for the fact that most of older members agree that Prowin unit is shit.

[@cozza1996]

@@dainiusvysniauskas2049 I was a young and impressionable twat that listened to them and got a prowin unit. Fucking awful

[@jmamcj]

People are perforating their gearboxes like gruyère cheese? Really? Just in case you find this useful: I only mill the front window. Then I mount the right half of the gearbox alone with the bevel in its position into the pistol grip.The bevel will not be in its perfect position, since there´s only one half of the grarbox case (It will have a lot of play), but you´ll be able to see clearly the depth needed for the motor to have the whole length of its teeth in contact with the bevel teeth. Then you mount the gearbox with both sides and the bevel inside, mount the pistol grip with the motor and buttplate, and try to move the bevel gear (using some tiny screwdriver, through the front window you milled) to see if it has a little play (less than 1mm of play). If it is stuck and won´t move, the pinion gear is applying too much pressure, so you have to shim to "rise" the bevel gear a little bit. I´m sure you get the point. When you got that less than 1mm play, you got it. No need for more holes in the gearbox. If you have to do it in an MP5, I guess you´re right: You´ll have to set the motor depth by sound.

[@drew7280]

I found your channel in the comment section of an airsoft supplier product listing. 10/10 your channel is /the/ shit 👍

[@johnfindlay5908]

I’ve got 3 VZs and one partial. I’m going to box them all up and ship them to you Negative Airsoft for DSG builds and loads of work 🤣 Only thing that lets them down is the shitty Ares hop rubbers

[@princezuko3132]

Thank you for videos! I just got lvoa S (first gun) even though u said not to

[@princezuko3132]

Well u prefered they are shit*

[@darrengill1987]

Here, if it works its the correct way.

[@ofektheking]

Can you do a guide video how to setup gate warfet setting correctly?, thank you, love your channel 🤩🤩🤩

[@magaz]

Flecktarn shirt over dyed black?

[@darkshock42mlg05]

Clearly reddit hasnt heard kf the half shell methoud where you jave the listol grip or motor cage attached to 1 of tha halfs of the shell and you can see it.