NEJE MASTER 2S Max (A40640 Module) Laser Engraver |Unboxing|Setup|Testing|

[@richardcampbell5762]

Now that's so cool. My mind is going a 100 miles an hour right now. Thanks for sharing. 👍

[@AVmake]

Thank you for watching! It is amazing what can you do with laser 😃

[@CJ_7519]

I can tell that you were havin' a little too much fun with that, lol🤣!

[@AVmake]

That’s true 😂

[@billwindham214]

That’s a useful tool. If you attend shows, you can bring this along and make custom items. I would try to make some designs on knife handles also. Can’t wait to see more uses.

[@turbotiger5998]

Is this better than the Sculpfun S9, as that is supposed to be similar to a 90w CO2 laser due to a smaller beam?

[@akka4751]

hello, could you tell me what is in the carving time MS? at what maximum spees mm/min did you manage to engrave photos???

[@zeoh4371]

Thank you so much for showing me how to find the focus length

[@erikaregina5376]

hello, what plastic did you use to protect the green acrylic?

[@zohaibhussaini7862]

Hello Sir, WHat Setting you used to cut a half inch or less then that wood Sheet? in the video i see a Box and a shark puzzle. what setting where used to achieve that, and did you use Air Assist in that?

[@ethanevans6349]

When you say ms is that the speed level you have it at?

[@matlangar.vanlalnuntlanga9110]

Do you ever engrave a photos on black granite with this Neje machine? It can done well or not much satisfy.

[@condoshare_bedspace_NCR]

Is the air assist came with the package or you have to purchase it separately?

[@vampiry5706]

Pode me informar onde consigo essa peça para comprimir o ar? A que adapta na máquina. Na minha não veio. Não estou conseguindo gravar no aluminio anodizado mesmo com mesmo tempo e potência. Seria a falta dessa peça que está prejudicando a gravação? Me ajuda por favor 🥺 agradeço

[@TimberWood.Customs]

Where did you get those cutting grates?

[@AVmake]

I made this one

[@TimberWood.Customs]

@@AVmake how

[@luisr2320]

Hello can this detect the size of the item that you are working on ?

[@weilam03]

The laser has a trace function you can see at 2:55 to let you know where it's going to cut/engrave

[@celsoaraujo2334]

Essa máquina corta acrílico até quantos mm ?

[@Sahtzor]

Neat machine. Does it accept any images or vector ones only? I'm also curious how this tool finds object shape/edges to put the engravement in the right spot. Can you explain please?

[@AVmake]

It accept images too. You have preview option on it where it shows outline of what are you engraving.

[@TheMrjogas]

@@AVmake hi just outline? Looking to get one too

[@CrisAnderson27]

@@TheMrjogas download the trial of Lightburn software, it'll show you how it works.

[@zlatkodervisic9727]

Bravo. Sky have no limit....

[@ComgrowOfficial]

LOL so awesome! Btw, the review is also useful.

[@thomasthatchum2091]

Hi, great video, thanks, got the 80W version. one question: what did you use at 5:48 to mount the air assist to the laser?

[@AVmake]

Thanks man! I made that small aluminum part

[@thomasthatchum2091]

@@AVmake Thanks for your quick reply. Thought i also could find it here. I am not talented in alumiium crafting, so i will look for someone who could send me the 3d-printed version linked at neje wiki. go ahead!

[@weilam03]

@@thomasthatchum2091 there is no 80w version by some resellers selling the 40w. I got tricked too but was able to cancel the order in time.

[@reformedcraftsman3373]

Does the laser sit high enough to be able to engrave thick items like cutting boards?

[@AVmake]

It does but you can always lift legs of laser to get more height

[@radder76]

Круто. Поздравляю с пополненим станочного парка. Ждём контент интересный.

[@jasonvliet-odonataknifeworks]

Have you tried it on carbon steel?

[@AVmake]

Yes I did you can see it on knife at 9:15 that is 80CrV2 steel

[@jasonvliet-odonataknifeworks]

@@AVmake I didn’t see the knife at the end, only the one at the 5 minute mark. Thanks!

[@frankrossi5019]

Great looking laser. What are you using for the base?

[@dalibortrkulja9582]

Pozdrav. Kako si zadovoljan logom na noževima? Može li ovaj laser biti definitivna solucija za logo na noževima??? Hvala puno unaprijed

[@AVmake]

Pozdrav Sto se mene tice moze stvarno dobro izgledaju gravure na nozevima

[@dalibortrkulja9582]

@@AVmake Zivio i hvala, kad budes mogao i htio, baci neki video posvecen tome

[@ЕвгенийАпарин-ю5х]

Здравствуй! Покажи пожалуйста из чего сделан насос для откачки дыма?

[@swoodsshop5977]

Is this the 80W ?

[@AVmake]

This is 40w

[@jocommb]

Yes... Its the same... They changed model name... Its realy a duble diode 15W laser...

[@divinoamaral536]

Excelente aquisição. Parabéns. Like from Brazil. 👍🔰

[@gurk2k]

Woha! Very nice

[@burgija]

Hello,did you try to cut plywood 3-4-5 mm thick and if you did how many passes does it take to cut it and is it clean cut ? Great video thanks for sharing :D

[@niklasnilhammer8925]

Nice! Tried it on non stainless steel?

[@AVmake]

Yes you can see on knife at 9:15 (high carbon steel)

[@primozz1111]

Can it cut clear acrylic

[@AVmake]

I try but it dosent work for me, maybe Im doing something wrong or it cant…

[@primozz1111]

@@AVmake tnx

[@roucvdvdlalref7097]

you can engrave steel ?

[@AVmake]

Yes it can

[@thebucketmouse]

Is this the 40W or 80W module?

[@AVmake]

40W

[@jabbarhajiyev3052]

Neje is has diod or co2?

[@AVmake]

It has diode

[@arabmoin0083]

Mind-blowing

[@shemeenalittlethings1730]

Name k&d fishing

[@luciafestas9611]

Belissimo trabalho .Parabéns.

[@mattbyman]

Thanks

[@petost]

Love your videos, great inspiration. Now, I have been looking for a engraver for a long time, is this a paid advertisment or you did your research and believe they are good value for money? Any limits in terms of engraving on knifes and metal? Thanks again for a great video!! Keep it up!

[@AVmake]

I believe this is really good engraver for this price.On steels works great, I'm having problems with aluminum,brass… This is also new tool for me.Need to learn how to use it properly.

[@jocommb]

Just be carefull... Its advised that we dont go at 100% power to save the lifetime of a diode....

[@jellscom7944]

I like ..

[@giuseppeabbondanza5250]

Ottimo video complimenti! Posso chiederti un favore?Potresti inviarmi i parametri grbl(💲💲) della macchina?Mi faresti veramente un grosso favore!😊