Tighty Clamp repair tool demonstration - Made in USA

Contact Dennis Barton at [e-mail]. Made in USA.

[@berserk7111]

I liked the " twist ending".

[@MonthlyCramps]

Simply a nice tool with unlimited applications. The wire can be copper, stainless, or even a hanger from dry cleaning.

[@Blunty67]

I have a wire clamping tool, that does a similar job. This looks like a better design in some ways than the one I have. The issue with all of these is not the fact that they clamp or how they clamp because they all do a similar job once you learn how to use them, and the work well. The issue is, that they are a pain in the butt to use in a hole, to clamp or repair a pipe unless you can get access to the whole thing, and have a big area to work in. This might be better due to the design, would be interesting to get or make something similar for limited access areas.

[@nverav4277]

kzbin.info/www/bejne/nYnTmI2gaaiYo6csi=57DDqxta7aa7sH6-

[@nabilaazaroual4703]

good idea .thank you for sharing

[@capitangmc]

The easiest version of the Clamptite!!!! Amazing ! El otro dia me pase 4 horas para fabricar mi Clamptite,soldando cortando,etc...este tipo utilizo un tornillo una arandela y una tuerca jajajaj que Genio!

[@tannermarlow5162]

capitangmc I totally agree.

[@christopherburgessgyro-cfi12]

What parts did you use to make the tightening knurled piece?? Simple clean design.

[@fortuner123]

I blew up my house the first time but now I think I have a feel for it. I inflated my tyres at a garage and they had used this method. When I was coiling the air tube I damn near ripped my finger of cos they left the sharp ends exposed.

[@tobiasdegner5526]

Thank you very much! It's an very good idea. But center your camera better, it is difficult to follow the video, if the important details were unvisible :) Often I have to clamp tubes like this, I'll try it too. Thank you ! Tobias Degner, Leipzig, Deutschland (excause my bad english!)

[@neponsetriver]

Far better than my German. ;)

[@ropermrmeredith06]

i think i can make one of these....i'm gonna try.

[@tannermarlow5162]

mr.meredith roper have you had any success? if so, what did you use for the rotating piece? I'm sure I can find something when I look, but I'm curious as to what you came up with?

[@turboslag]

There are 2 other similar tools on the market that I know of, the Clamptite and Handee clamp. I like the Clamptite best.

[@Thestripper1]

The clamptite is over $100.. No craftsman with any self respect would pay that for a tool that you can make yourself from scraps.

[@nverav4277]

@@Thestripper1 Я свой хомутатель готов продать за 20 долларов kzbin.info/www/bejne/m4bUhaGirJxphqcsi=yxKqrW6OA8l-GCJR

[@45triza]

Bravo, cool tool🤔

[@HBOUADI]

Thanks, it is genius

[@ScolWolf]

funny thing :) In Russia, every gas welder, builder, plumber knows how to make this work without tools. Very simple Russian method. Only the hands, the laws of physics, and a minimum of effort. A fast and very reliable. The number of turns of the wire and compressive strength - Unlimited.

[@beenabarna1403]

I am curious to know this method please

[@cuffem2]

Трубачев Евгений z

[@salazaal123]

Трубачёв Евгений

[@Z71Ranger]

Video Link Please...

[@neponsetriver]

Video link to what?

[@nicolasartheau822]

Very elegant tool but not to be used with too fragile pipes, or should we say beware of adjusting the strength of tightening to the résistance of The pipe especially If It works in an highly vibrating surrounding (a car engine for example).

[@louiscypher7090]

Add X 7, then X by 90, X by 5, subtract 4 add 15...

[@irgski]

common parts found in a hardware store...or McMaster Carr...

[@newcoyote]

Why? This seems like a disproportionate amount of work and effort compared to what already exists and works just fine. Not to mention how you would even do it in real worl application rather then on a nice open table.

[@CosgroveNotts]

I've never used tool in 50 years of working

[@rwbishop]

Works anyplace a screw clamp works? Could you do a demo video of it being employed to install a 'clamp' on a deeply buried hose end; one thats accessible only with your left hand (or right if left handed)... and so situated in one of those places where you have the choice of either viewing or touching with a fingertip or two... but not both at the same time? Those are real world... for the record, I never recall having need to put on a clamp on a loose hose/nipple assembly like in the video, nor have I ever seen or heard of anyone in such a position. (Other than county fair & KZbin sales hype videos.) However, the nasty buried one hander clamp situations are fairly common.

[@arealassassin]

You have hit the nail on the head! And another thing- if that's how long he takes to clamp one hose; I'm not gonna employ him anytime soon!

[@anonimous2451]

@@arealassassin ROFLMFAO, you moronic turds couldn't help a flea find a dog hair. IF either of you had even 1/2 a brain you could figure it out yourself, yet, you ask for a roadmap like a lost child. Too f'kn funny.

[@keithbland5365]

I WOULD LIKE TO BUY THIS TOOL, ANY TOOL NOT MADE IN CHINA OR TAIWAN IS AND UPGRADE.

[@neponsetriver]

True.

[@keithbland5365]

Neponset River how do I buy the tool

[@neponsetriver]

I didn't find a seller for Tighty Clamp, but you can buy a very similar ClampTite tool, which is better know and available at a*m*a*z*o*n.

[@keithbland5365]

Neponset River thanks I will try Amazon

[@keithbland5365]

THANK YOU

[@kevinisawake]

WHERE TO BUY THE TWISTING PART???

[@peterblass1]

Umständlicher geht es wohl nicht!

[@silveravnt]

why not just multiply x14 no multiply by 7 and then multiply by 2

[@maxiepads]

Large numbers like 14 vs 7 is too much for some people

[@souptonutsbolts9209]

will that work on Pex tubing

[@neponsetriver]

That's a good question. I don't know the answer, but if it were me, I would stick with the appropriate Pex crimping tool method. You don't want to have a flooded basement. In a pinch I would try Tighty Clamp or ClampTite. They're very similar.

[@MrBonners]

try it and see

[@davesstuff1599]

Is there some reason left hand thread is used?

[@tannermarlow5162]

David's Favorite Videos yes, there are many reasons to use LHT. for example on a rotating assembly were the rotation could cause a RHT nut to become loose. also on gas cylinders such as acetylene or propane as an added measure of safety. but to answer the question that I think you really meant to ask, this tool doesn't use LHT. he turned the nut CCW and the nut moved toward the head of the bolt. that is the same as turning the bolt CW, which, because of the wire resting in the slot in the bolt, cannot be acomplished.

[@dennisbarton7373]

The thread is a standard Right Hand .... it's a 1/4-20 Carriage Bold I bought at the Hardware Store!

[@ranggengjaya97]

Mantab Iam subscribe lurrr 🙏👍👍

[@stevemcqueen3172]

Keep a bunch of hose clamps in various sizes.. cheap

[@burnerjack01]

5 minutes with this vs. 5 seconds with a hose clamp...

[@markturner7459]

Good but Ligarex is easier..

[@rs2143]

My bosses neck after i beat him with the hose.

[@williamkyle1989]

a lot of work for a simple job