An excellent video. We can't find decent clamps here at all and the crappy ones are way too costly. I'll never buy another clamp. I like the drilled holes through the washer option as opposed to cutting slots on the side. Much better control. We assembled a water distribution manifold a few days ago, turned on the pump and what I thought were tight connections blew apart! Poly pipes of 40mm 32mm and 20mm ids. Today we start with the Tight Clamp tool. Not over over-engineered and doable! Thanks a ton!!!
@williamlott76122 жыл бұрын
I really like your design, one tool, easy to use, easy storage. Well done. Darlington, South Carolina
@StrzalaOstryPazur Жыл бұрын
This is a simplest form of the tool for this kind of clamp I've ever seen. Good job
@matthbva Жыл бұрын
I’ve seen many DIY versions of this tool and some rather expensive commercial ones. I could pretty easily make one myself, but I enjoyed your video so much that I was thinking of buying one if I could find it for sale anywhere. Sadly, I can’t. Looks like I’ll be rolling my own! I realize this is an old video, and perhaps these didn’t exactly take the market by storm. (Some people don’t appreciate a good idea.) I hope you’re well. 👍🏼
@abdulhamidhazaini19705 жыл бұрын
Thank you for the nice clear demonstration video on the hose clamp.
@theusconstitution17762 жыл бұрын
That’s the best version of that clamp I’ve ever seen quick and painless to make with stuff I already have just laying around in the garage probably some stuff my kids would say dad why don’t you throw that junk away😳 Going out to the garage right now dad’s gotta make one of those clamps CREATOR ❤️🇺🇸 out of junk for free
@aeiouvogal51154 жыл бұрын
Perfeito - simples, prático e funcional. Parabéns e obrigado pela dica.
@space1bandit5 жыл бұрын
Neat tool. And easy to make. Thanks for the video.
@herminiobarraganlopez23955 жыл бұрын
Muy sencillo y muy fuerte buen video buena técnica saludos
@neffereduardoscottdevitta12184 жыл бұрын
Muy útil y sencilla su herramienta. Gracias.
@michaeljohn7398 Жыл бұрын
Excellent little tool, small simple and very effective.
@jerryc70163 жыл бұрын
Nice demo. 👍
@lmp22085 жыл бұрын
Length of wire required: you will need minimum 13 x diameter just for the the clamp (after cutting off the ends and folding over) not including the extra to engage the tool. 20" is mentioned yet the hose appears to be about ¾" diameter ? So the length of wire required = (4π x dia) + 10" to engage tool; OR 13 x dia. + 10". The "hold" relies on the sharp turn back of the free ends, not twisting the ends together. It is neater to cut the ends as short as ⅛" (for wire < 14gauge) and tuck them downwards.
@bigviper642 жыл бұрын
I’m creating my clamp to wrap wire around a 4 to 5 inch diameter post, holding some Cattle Panels to the post…
@823Steve4 жыл бұрын
Put a little dab of dish soap on the hose where the wire goes around it and it should even right up as it tightens.
@edwardstagner10213 жыл бұрын
I like the way you tied it off and the tool is very small if you wanted to put it in your backpack we could make crutches or whatever you could come up traps etc.out in the out back if you needed it. I do think the handle should be larger for some more leverage though maybe a t -handle. Nice job!
@tinamarie48753 жыл бұрын
Just a suggestion, in the future draw a square on the bottom where you gonna keep your hands above -- this way you'll know that if you move your hands outside this square you'll be out of the shot and the camera will not be able to record it -- especially when you're zoomed in the way you had it -- which we appreciate it, because you're showing us exactly how you're doing it, but if it's not in the shot we can't watch it.
@jakedewald2 жыл бұрын
I've made one of the larger wire clamp gadgets, but I'm going to be thinking about this for a while so i can make something that will work under a hood. Where i live, it's not very easy to come by good worm gear clamps
@michaelcorbidge79142 жыл бұрын
And im with you on this job . Looks like you too want to join two garden hoses together using a couple inches of ½ " copper pipe as connection . You also know tjat at high pressures that commercial hose clamps don't hold .
@mekanikobisdak44903 жыл бұрын
Very nice tools
@sunilsingh-px5hh4 жыл бұрын
Great.
@darkplanetmoon4 жыл бұрын
Nice.
@josejorgeromero68133 жыл бұрын
Excellent tool! Is there a way that you make a video building it?
@michaelcorbidge79142 жыл бұрын
Good, and the the fabrication of the tool is easily surmised from picture . There's also another tool for straight tight wrapping of many turns of wire demonstrated by odvoko . Many turns of wire is useful for a split tool handle say
@wilsonaguirregomez37517 жыл бұрын
Thank you very much for your video sir!
@TheSnarler702 жыл бұрын
Cool of you have all day to play around
@vovchenkovadim2 жыл бұрын
👍👍👍 thanks
@iainmel16 жыл бұрын
Did you make this great tool, or did you buy it? I want one.... It's actually small enough to be useable under the hood of a car/inside washing machine etc.
@stephenarling16674 жыл бұрын
Small enough, but not nearly as ironclad as Œtiker clamps.
@stephenarling16673 жыл бұрын
@Dave M If wire clamps did the job "just fine", then plumbing codes would approve their use for installing PEX plumbing. They do not. Pinch ear clamps (Œtiker clamps, named after their inventor more than half a century ago) do a superior job, and can be readily installed where space would not permit manipulation of a wire clamp tool like this one.
@K_c_B2 жыл бұрын
@@stephenarling1667 The reason this and alot of other things don't meet code is not because of a failure of the thing its because u can't guarantee that every person using whatever the tool or technic is will use it properly or successfully (user error) thats why they require things that may not be better but have a smaller margin of error and are manufactured with quality control but none of that means it is necessary better just generally uniform Oh BTW I am not necessarily suggesting this is better than any other I have yet to make one yet was watching the video and was about to make a wire camper thing so haven't tested it yet
@barbaramcclure8249 жыл бұрын
Instruction is very easy to understand
@robertogarciapinal88155 жыл бұрын
Hello Friend: The piece that goes on the screw, how do I get it or what is the name, or give me an idea of how I can make it. Beforehand thank you very much. Of all the tools that I have seen on the internet, the best one is the one that you publish.
@dennisbarton73735 жыл бұрын
When I had my shop set up, I machined the "knurled barrel" on my lathe.
@artteacher.26943 жыл бұрын
Yes, your hands are big, blocking the camera👍🤣😂 . Acknowledging the truth is a virtue .🌹
@wilsonwillianvellozo85076 жыл бұрын
Como faço para adquirir o produto.
@tomgorden37622 жыл бұрын
Is your tool available for sale anywhere.. (online perhaps)?
@JDeWittDIY3 жыл бұрын
Where did you get the knurled nut assembly?
@K_c_B2 жыл бұрын
I was wondering the same thing was about to make something similar but if he would discuss where he got the parts from would be nice... 😉😉video creater
@patrickkabuki70493 жыл бұрын
👍🏽👍🏽
@rodericktamayo19934 жыл бұрын
What type of wire did u use in this video? Also the size of wire. Thank you.
@antoniojimenez3724 жыл бұрын
Roderick Tamayo at Walmart they sell the wire for 6bucks and is like 25 or 50 feet or 99cent store they sell it too
@avflyguy3 жыл бұрын
most folks use .032 aircraft lock wire or as some say, safety wire. It's stainless steel and has been tested to meet FAA aircraft standards. And it is tough stuff! www.amazon.com/Malin-Safety-Wire-Canister-0-020/dp/B01BDVX34O/ref=sr_1_21?crid=3S52GM4BJFJV5&dchild=1&keywords=032+safety+wire&qid=1596220718&sprefix=0321722%2Caps%2C178&sr=8-21
@michaelcorbidge79142 жыл бұрын
Just gotta be mindful that these days the wire manufactured in tchyn-a might be poor quality compared to long ago stuff .
@LosAngeles24st6 жыл бұрын
whats the thickness of the wire?
@stephenarling16673 жыл бұрын
Stainless binding wire of 0.032 or 0.041 inch diameter (about 1mm diameter) is commonly available for this.
@dinlee2614 Жыл бұрын
where to get the tool?
@TM1Alan3 жыл бұрын
Ya know, these things work great on the workbench. Try using on on the back side of a lawnmower carb. Not so great in tight spots.
@alfonsocasillas72904 жыл бұрын
That’s the greatest idea I’ve seen in a long time where did you find that other nut in the middle
@stephenarling16673 жыл бұрын
He said he machined it on his lathe.
@zfolwick2 жыл бұрын
@@stephenarling1667 well that's goddamned useless isn't it?
@stephenarling16672 жыл бұрын
@@zfolwick Useful if you need a clamp size that is otherwise unobtainable.
@Pushyhog4 жыл бұрын
Can u pay your light bill please. Can u leave a link/price? Clamptite $29/ebay, ttd to the door.
@stephenarling16674 жыл бұрын
DIY clamp tool from turnbuckle, wingnut, and bolt: $3 max.
@miltonnorytulcanalvarado22434 жыл бұрын
Por favor me dice como es el accesorios para ajustar, muchas gracias
@josejorgeromero68133 жыл бұрын
En inglés se llama "knurled nuts".
@wesm39153 жыл бұрын
Check out the Original haywireklamper.com
@rensachi61093 жыл бұрын
aryan
@user-ll7ul4mh8p4 жыл бұрын
Слишком сложно! Есть версии проше
@nverav4277 Жыл бұрын
Из ваших отходов с помощью моего хомутателя ещё один хомут можно сделать kzbin.info/www/bejne/nYnTmI2gaaiYo6c