Today we take a look at Nerf RAMPAGE AR Removal & DETAILED Internals Overview | 2020. Let me know if this tutorial was helpful to you. Enjoy your new modified rampage! Don't forget to subscribe for more content.
Пікірлер: 23
@2003frontier4x49 ай бұрын
Wow a metal priming piece. I’m impressed. Just bought one on Black Friday sale. Great video!
@eastlake_kicks3 жыл бұрын
air ristrictor removals on pump action springers usually give a 10 fps boost
@foamflingingproductions21823 жыл бұрын
yea. not much but anything counts!
@umwhatt6 ай бұрын
How did u drill mine just spun like crazy
@foamflingingproductions21826 ай бұрын
If you have a vice you can hold it in that. Just be careful don't tighten it too hard around the tube or it can break. If you don't have access to that you can use a screwdriver and hammer and put the screwdriver in the tube and hammer it down thereby breaking the AR assembly
@egyptianprincess3804 жыл бұрын
You're amazing! How did you learn all that??? Do you have any tips on modifying a surgefire Nerf gun?
@Stoppie_October5 ай бұрын
There are far better options for drum fed pump action springers but as far as the surgefire goes replacing the springs, remove the locks and the ar and cut out the dart posts so you can use short darts. You can also brass the drum which would allow rear loading as well.
@jackolantern77504 жыл бұрын
You have tons of guns do you have airsoft?
@foamflingingproductions21824 жыл бұрын
Jackolantern7 7 no, I just have nerf. Do you play airsoft?
@SalvationSkateboards4 жыл бұрын
You have lots of nerf guns brotha. Just subbed to Your new channel :) pretty cool you know how to modify it
@foamflingingproductions21824 жыл бұрын
Yeah, do you play with nerf blasters at all?
@SalvationSkateboards4 жыл бұрын
@@foamflingingproductions2182 i havent used one in awhile but came to help support cause you the fam
@foamflingingproductions21824 жыл бұрын
Salvation Skateboards awesome thanks for the support! 😉
@polyduckwanaland3 жыл бұрын
Any way to do this without a drill? If not that’s fine
@foamflingingproductions21823 жыл бұрын
Yes! you can use a hammer with a screwdriver and hammer the screw driver into the tube. I've done that before and it's worked.
@polyduckwanaland3 жыл бұрын
@@foamflingingproductions2182 thank you for telling me! That helps a lot because another guide I saw used a dremel
@polyduckwanaland3 жыл бұрын
@@foamflingingproductions2182 I’ve been going at it for just over 30 minutes and it hasn’t budged. I am hammering from the back.
@foamflingingproductions21823 жыл бұрын
@@polyduckwanaland yea i have done it once. It takes a good amount of banging and elbow grease. It'll come out eventually though. Just keep at it. Be careful not to damage the tube though by putting a hole in the side....
@blackkcrafter74052 жыл бұрын
i m buying nerf rampage , Should i buy it in 2022
@ScriptedOcean2 жыл бұрын
If you didn't already buy the rampage, consider the adventure force villainator. it's cheaper but the rampage is still amazing.