Nerf Rapidstrike CS 18 v2 IMR Battery Mod Kit (Nerf Compatible High Voltage Batteries!!)

www.bleenga.co... » Check out this video review of my Rapidstrike CS-18 v2 with the Dorm Labs High Voltage Mod Kit.
---------------------------------------­­---------------------------------------­-­--------------------------
Buy on Amazon: amzn.to/1EevREv (aff.link)
UPDATE: In Case the Amazon Link is SOLD OUT, I have put together a very similar kit which includes all of the same items for basically the same price.... (Note: These are affiliate links. As an Amazon Associate, I may earn a commission on eligible purchases made through my links at no cost to you.) Check it out:
2 Efest IMR 14500 700mAh batteries: ebay.us/Kqmqkf (eBayPartner link)
2 NiteCore IMR 14500 650mAh batteries: ebay.us/bT8gQ3 (eBayPartner link)
2 AA Dummy Batteries: amzn.to/3YkVxKf
AA to C Size Battery Converters (for use with Rapidstrike): amzn.to/3x4Tluj
More Expensive High Quality Battery Converters Option: amzn.to/1kxSryE
Universal Battery Charger: amzn.to/3JTxUUU
And there you go, there's this kit! Since DormLabs does not keep a good stock or supply of this kit, I have provided links to purchase everything separately. It should be about the same price. I have provided two different options for the AA to C Battery Adapter, you don't have to buy both. Buy everything listed above and you'll be golden.
---------------------------------------­­---------------------------------------­-­--------------------------
It happens to the best of us and it even happened to me! I ran out of batteries right in the middle of a Nerf War! My Rapidstrike CS-18 was completely dead and I couldn't do anything about it! Watch what can happen to you if you let your Nerf blasters batteries die while in battle. Be careful! It could happen to anybody! Afterwards, I vowed that I would never let that happen again! Luckily, Dorm Labs gifted me with this pretty sweet High Voltage Battery Mod Kit for Nerf Guns, featuring a couple of high powered IMR batteries. So check out the video and see me do an unboxing and review of this drop in kit from Dorm Labs. You'll be able to see a before and after firing test of my Rapidstrike CS-18 and my prep work and installation of the kit in between. I'm sure you won't be disappointed! Thanks for watching!
---------------------------------------­­---------------------------------------­-­--------------------------
Stay tuned to my channel for more fun Nerf Gun related videos!
Never miss a video again... Subscribe! (It's free): bit.ly/Sub2NGA
---------------------------------------­­---------------------------------------­-­--------------------------
Check out my website: www.nerfgunatta...
my Facebook: / nerfgunattac. .
Twitter: / bleenga
Instagram: / nerfgunattachme. .
---------------------------------------­­---------------------------------------­-­--------------------------
Oh, and here's a link to the gloves I'm wearing in this video: amzn.to/1eW9rMf
Thanks for watching the Nerf Rapidstrike CS-18 v2 with Dorm Labs High Voltage Battery Mod Kit Review!
Like, Comment, and Subscribe!
As an Amazon associate, I earn from qualifying purchases. Bleenga is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
As an eBay Partner, likewise I may also be compensated if you make a purchase using one of the eBay links in this description. This post may also include other affiliate links from other vendors, but as always, these cost you absolutely nothing. Thanks again for watching!

[@Bleenga]

Check out my new video here: kzbin.info/www/bejne/jWO9pKqBfKpna6M Beware, it's kinda cringe!

[@dextermatthew3592]

That intro tho

[@rap6586]

Ha! That intro tho. Great vid! Might consider purchasing.

[@pixely_ninja229]

if its purchasing a rapidstrike, doit.

[@pixely_ninja229]

I bought some high power batteries for my stryfe before I short-circuited it, and they made the thing shoot a max of 115 fps (for real) and when I broke it and replaced with rapidstrike (i shorted it by trying to install full auto mod so might aswell buy a full auto blaster) I thought I wasted my money. I dunno HOW i never thought of a BATTERY CONVERTER, but technically you saved the 10 bucks I spent on the batteries. Thanks so much!!!

[@Bleenga]

you're welcome!

[@Samuel-iv4qt]

I've put a 9.6v rc accu in my RS just with the stock motors. It's shoots awesome

[@Samuel-iv4qt]

*it shoots awesome

[@jolenetnh]

I am putting 3 of those IMRs for 11.1v

[@mmorrissey9899]

Just a thought....you still have plug ins on the floor with the sea of snakes (wires)?

[@Bleenga]

I'm a mess, dude

[@Kuli24000]

I have mine on 2 IMRs in parallel with 2 more IMRs. Brought it from 80fps (2IMRs) to 100fps (2x2IMRs)

[@warriorharj79]

Did do change any of the internals? Like rewiring it.

[@treysonthelusma3408]

What do you mean in parallel I don’t understand sorry

[@Bleenga]

how has it been holding up all these years?

[@Kuli24000]

@@Bleenga Honestly I just put it away and haven't used it since. Too many other good blasters.

[@Bleenga]

@@Kuli24000 Same. What kind of blasters have you been using lately?

[@warriorharj79]

How has this gun been running since?

[@Bleenga]

If I'm being honest, I didn't run these batteries for long -- I wanted to give people another option, but I like to do full re-wires and use LiPo's. Only 2 IMR batteries should do just fine, though.

[@kevinzaleski5895]

Thanks for doing this! I'm definitely gonna buy a kit soon, and I just subscribed because I probably like nerf attachments as much as you do!

[@Bleenga]

+Kevin Zaleski Yeah, no problem! I do it for all of you guys that make up the Nerf Nation. You should definitely buy this kit, it's awesome! They make it so simple to use and install, I love it. Also, thanks for the Sub and stay tuned for more videos soon.

[@ultracj1299]

+Nerf Gun Attachments Excuse me? I would like to ask a question about this pack, I heard a rumour that it can burn out the motor. I was considering buying the pack once I get a rapidstrike which is hopefully soon, can you please answer it for me? If you do, because of the AMAZING video I WILL subscribe

[@Bleenga]

Well, I haven't had any problems with mine and I've just revved it continuously with and without firing. Plus, it's only using 2 IMR batteries. Motor burnouts usually occur with 4 or more batteries. Lots of people use 3 batteries and their blasters are fine. So, I think 2 batteries like this should be fine. No guarantees, though. It's always "Mod at your own risk." Also, you can hit that subscribe button now. Haha

[@ultracj1299]

Thank you for answering! I greatly appreciate it, definately subscribing now. 2 reasons, 1: You respond to comments, 2 the video was amazing!

[@Bleenga]

UltraCJ12 Thanks for the support!

[@jadenfaber4857]

Hey thanks so much for making this video and taking the time to put everything in the description, it has really helped me out especially with finding the right IMR batteries. Nice work.

[@Bleenga]

thanks for the support!

[@seancowger]

I couldn't find the kit, but all of the parts are available online (Amazon, EBay etc ). The battery charger and dummy batteries took 3 months for me to get. The only issue I had was with the rechargeable batteries, the positive end of the battery is flat so getting a connection is hard but not impossible

[@Bleenga]

+Sean Cowger yeah. You were supposed to make sure the batteries were button tops instead of flat. I had a list of links in the description, but I made it a while ago so I'm not sure if everything is still available

[@derek596]

Hey Blee I notice that the set includes IMR but why does the charger say "trust fire" on the front? And also does this also charge AA batteries?

[@Bleenga]

+Laura Vuong hey, thanks for asking. "Trustfire" is basically a brand name. They make lots of different types of batteries and IMR batteries are one kind of battery that they make.... And yes, this charger should charge any kind of rechargeable batteries that you can fit in it.

[@randomuslygenerator1518]

Hey just a tip, consider switching to lipos. IMRs tend to burn out your motors

[@danielauen7790]

Accidentally left some cheap alkaline in mine, and now all the contacts are toast... 3s 18650 time?

[@Bleenga]

Yup!

[@thetypicaltubers7705]

Do u need to rewire or bypass thermistor?

[@Bleenga]

+TheSunlightGankers no, I do the entire mod on a stock Rapidstrike on camera in this video.

[@jamaalpucci8209]

for the batteries do you need to use 14500 or can you use 18650?

[@KekusMagnus]

14500 is AA size, 18650 is much larger, so you would need to modify the battery tray as they wont fit

[@Bleenga]

14500

[@plexifity472]

tryna convince my parents to buy it since today i tried modifying my rs and the 2 extra batteries blew up

[@plexifity472]

luckily it didnt get on fire for to long

[@Bleenga]

Wow!

[@ericchia23]

thanks for sharing i got the same IMR and DUmmy batteries... May i kow how long can the batteries last?? and also when is time to charge up the batteries (at what voltage)?

[@Bleenga]

+ericchia23 I'm not sure of the exact voltage that these should be recharged, but if you're using a meter, try not to let the batteries fall below 3.6v. However, just make sure to recharge them as soon as you notice the performance of your blaster start to degrade substantially.

[@ericchia23]

Thanks for the reply.. So not less then 3.6v during idle? Not load voltage right? Cause I use on stryfe and fired about 40 rounds continuely and the blaster Rev slow down. However after resting the blaster I measure the voltage it still 4.2 or 8.4v.

[@Bleenga]

ericchia23 yes, idle... But a flywheel blaster is like a car, she'll tell you all you need to know by the sounds she makes. Haha

[@ericchia23]

+Nerf Gun Attachments .. thanks.. look forward to more of yr videos

[@jonathanslving7462]

Will you have to remove the thermistor?

[@Bleenga]

+JonatEmma Sølving no sir. If you watch the video, lol, I take a stock Rapidstrike and do the whole mod on camera.This is as simple as replacing the batteries.

[@jonathanslving7462]

+Nerf Gun Attachments sorry:) but Will it work with the stryfe? I think that the thermistor will shut the hole thing down!

[@Bleenga]

it definitely works with the Stryfe... 2 IMR's is the sweet spot. any more and it'll probably shut down. However, there is a trick with twisting the thermistor to disable any resistance

[@pLaCiDMoOoN]

This video was hilarious:D Thanks!

[@Bleenga]

+Stellar lupus No, no , no... Thank YOU for your viewership. And thanks for the support. Stay tuned for more videos from the channel... (hope you subscribed!)

[@pLaCiDMoOoN]

+Nerf Gun Attachments Of course I subbed! Looking forward to the next one:)

[@gabrielroxbury4215]

Thank you!!!!

[@Bleenga]

You're welcome!!

[@craiganderson5827]

Thank you i dont want to do fancy stuff this is a big help

[@Bleenga]

No problem. But the fancy stuff is worth it. Trust me.

[@reubybenson8653]

Did you upgrade the motors before using the imr's?

[@Bleenga]

nope -- those are stock motors.

[@MarcG7424]

Wouldn't be necessary since only using 2 IMRs and not using the blaster continuously I've seen people use 3 IMRs and 1 dummy battery in that case the motors have to be upgraded. I'm going to do the same in my Rapidstrike but I'm gonna use Cool Looks instead.

[@loftus8702]

so if I just put there 2 trustfires and 2 dummy batteries, it wont shut down?

[@Bleenga]

+Loftus 8 no, it won't shut down. That usually happens when you add a third battery

[@loftus8702]

Nerf Gun Attachments thank you so much

[@wastefulslayer8755]

Thanks

[@sidehustleheaven1]

You can just get a charger and battery combo right? I got one that costs 11 dollars.

[@Bleenga]

You can get the batteries, dummy batteries, and the charger -- the battery sleeves are only if you want to use it in a Rapidstrike or something that takes C size or D size batteries.

[@jesselam5867]

Those motors arent gonna last long they are designed for 6volts but with the new batteries it now outputs 14.4volts which is more than twice he voltage if your gonna incrase the voltage more than a few volts it is best to replace the motors designed for the voltage

[@Bleenga]

That may be true, but this kit is sold and marketed as an easy pop-in mod kit without any other modifications necessary. And it's been working fine ever since installing the batteries... I've used them in the Rapidstrike and in a Stryfe.

[@markusmayer4363]

my rapidstrike has 11.1 volts

[@slingg1050]

Jesse Lam imr batteries normally output 3.7 volts each. With two imr batteries it is outputting 7.4 volts, I think the motors will be fine...

[@justingallen1785]

where did you get it

[@Bleenga]

the company went out of business. sorry. there are some links in my video description that you might find useful

[@georgiasmith1910]

Great vid bro

[@Bleenga]

thank you so much

[@kaiserbrutus730]

Any rewiring needed? Please say no. 🙏

[@Bleenga]

There's no re-wiring required. So No. haha

[@Jason-nj5qe]

Lol the beginning of your videos kill me!

[@Bleenga]

don't die, bro

[@brian8552]

Could I use 2 double AAs with the IMRs instead of fake batteries?

[@Bleenga]

You could, but I really wouldn't recommend it. Not sure if it would short the circuit, also not sure it wouldn't eventually start a fire or something crazy like that.

[@temx7526]

Can u put two imrs and two dummy batteries in a Stryfe?

[@Bleenga]

Yes, absolutely.

[@jackaboi6106]

Most of your amazon links dont work. same with the actual product link. Help?

[@Bleenga]

sorry, it's because this video is so old. Just click on the link and see if it has recommended or similar items. IF not, maybe I'll have to do a new video on this

[@josezeledon7459]

Can you use a regular battery charger to charge the special batteries

[@koopertrooper7008]

Joe Blue I don’t think you can

[@Bleenga]

no

[@trucker3242]

hey did you mod the internals for it to work?or you just put the batteries in?

[@Bleenga]

Hey there. No internal mods were necessary for this to work. Lots of stock Nerf blasters can run higher voltage batteries straight out of the box, but only if you use the right amount. Some blasters won't work if you put in 3 batteries or they'll burn out the motors quickly. 2 batteries is the sweet spot.

[@trucker3242]

Nerf Gun Attachments thanks maybe i will buy one

[@littleman2098]

what if you use the duracal instead of the dummy batterys

[@Bleenga]

+littleman 209 I don't think it's a good idea to mix lithium batteries and regular alkalines... I've heard there's a huge risk with overheating, leaking, or rupturing batteries. Plus, it won't offer any advantage. The two IMR batteries here are enough to amp up your performance. Any more and I think you'd have to remove the resistors/thermistors and rewire your blaster anyway.

[@littleman2098]

Thanks

[@ratuclara38]

Is it possible to run three 3.7V Imr's to stock rapidstrike? Can someone help me

[@user-vc3es6zg7u]

Nope,it will burn (I tried 9.6v then burned but still work with 6v) I’m sure this guy’s cs18 burned after the video for using stock blaster with high voltage battery but you can use 3.7v x 2 with 2 fake battery

[@Bleenga]

I'd really only recommend using stock batteries unless you do a re-wire. A re-wire is pretty easy to do if you watch a good guide or sub to my channel -- I'm gonna be doing a lot of modding soon. And then you can use any IMRs or a LiPo. My Rapidstrike never burned out, but I didn't use this kit constantly. But with only 2 IMRs and 2 dummy batteries you should be fine. No need for 3

[@kennyishungry8101]

Nice man! If you rev it for too long will the motors blow? Please answer Thx :D

[@Bleenga]

No it is safe to rev the motors continuously. No worries!

[@kennyishungry8101]

Ok thx and keep up the great videos :D

[@santiagoguadarrama802]

+Nerf Gun Attachments do you need to open the blaster for this kit to work ??

[@Bleenga]

Santiago Guadarrama no...I do everything start to finish in the video. I didn't leave any steps out... Watch the vid.

[@santiagoguadarrama802]

+Nerf Gun Attachments okay thanks, but i hace anptjer question will it work with 900mah imr batteries?

[@J1NNB3AM]

What is that fore grip and drum clip called and where did you get them from?

[@notforsaletoday1895]

Ben Rickard that's a retaliator grip.

[@Bleenga]

correct. that's a Retaliator assault grip and a 25 dart drum mag from the Nerf Rampage.

[@EstCrossings]

did you remove all the resistors and electronic locks

[@Bleenga]

Nope. There was no need. The only thing I opened up on this blaster was the battery tray. That's the great part about this kit.

[@EstCrossings]

ok good i dont have to worry about screwing up my blaster when rewiring it

[@f3rl366]

is this one better than the one from blasterparts?

[@Bleenga]

I'm not as familiar with the specs on those. Looks like it comes with 3 high voltage batteries, while this kit only comes with 2. However, on most blasters, I believe when you add 3 IMR batteries, it needs some kind of rewire or thermistor bypass, at the least. This kit was good because it just dropped in and you didn't have to worry about anything. BUT, this kit is apparently indefinitely sold out. SO, I'd suggest buying the pieces individually as I've listed in the description, which should be about the same price this kit retailed for. That way you could buy as many IMR's and dummy batteries as you want and just mix and match. OR just buy the Blasterparts kit -- They make good stuff.

[@santiagoguadarrama802]

in total how many volts do you have after puting the imr's?

[@Bleenga]

+Santiago Guadarrama 7.4 volts

[@juliotabamo1898]

Did you have to rewire or twist any wires up?

[@Bleenga]

nope, none

[@dmgp1f]

how long do the imr's last? I see the 14500 are only around 700 mah. I was think of going 18650 because they seem to be a higher capacity

[@Bleenga]

+dmgp1f these 14500 last a pretty long time. I used them through a few Wars and playing around the house and they still aren't out.

[@dmgp1f]

Nerf Gun Attachments thank you for the response. I have one more question if you don't mind, so I went with the imr's 14500. I am putting them in a Nerf rival Zeus, I only received 2 in the mail I was planning on putting 3 because I figured 2 would only be 7.4v, so I figured it wasn't enough voltage, so I installed 2 efest imr's 700mah and the Zeus hits way harder then with six c batteries do you know why that is? if 2 imr voltage is Less then 6 c battery voltage thank you

[@KekusMagnus]

6C batteries form about 9V, but when you actually fire the blaster, its motors demand lot more power than the batteries can give it and so the voltage drops quite a lot. This is because regular alkaline batteries are too weak to power nerf motors, but Hasbro compensates for this by making you add more of them. Overpowering batteries like this reduces their lifespan but alkaline batteries are not rechargeable and most people will just buy more when they run out. High-discharge IRM batteries on the other hand are designed to output a lot of power and thus don't experience this voltage drop, and so when you fire them, they keep their voltage, which means you need less of them to deliver the same power as the large lot of alkalines you use by default. Also, 3.7 is a nominal voltage, as in it is the average safe voltage of the battery. Fully charged IMRs are around 4.2-4.3 volts, so two of them means you were running 8.4-8.6 volts, and without a voltage drop, this is actually quite a lot of power

[@Izzys]

you should buy another battery pack so u have four actual batteries instead of 2 real and 2 fake..imagine the power on that and if u do please make a vid

[@Bleenga]

That would be cool, but it's not possible unfortunately. Using 4 batteries would actually most likely burn out the motors and effectively break your blaster. Lots of people use 3 batteries, but that requires fully modding your blaster. And that means removing all of the electrical locks and rewiring everything.

[@brianlee2039]

should we use nerf blaster parts mod kit or this dorm labs mod kit

[@Bleenga]

+Brian Lee they don't make this kit anymore, so you can buy the pieces I list in the description or just buy the Blasterparts kit -- they make good stuff

[@brianlee2039]

I under =stand that. However, I think the kits are slightly risky as the stock motors may overheat and may not be safe and may even ruin the blaster. I would rather do a normal mod- rewiring, restitching, replacing motors, 3s lipo pack

[@Bleenga]

Doing a full rewire is always the best option, but that's not always an option for everybody. Some people don't feel comfortable working with soldering irons or electric wiring. This kit seems to be perfectly safe, though, and I've never encountered any issues, even using this setup in several blasters during different Nerf wars.

[@swendingocomingsoon6748]

If i put the same batteries in my ELITE XD rapidstrike will it have the same rof as this one? he has the normal original one.

[@Bleenga]

+Leaf Man the only difference between the Rapidstrike and the XD Rapidstrike is the color of the stripe and buffer tube on the stock

[@swendingocomingsoon6748]

Nerf Gun Attachments i heard the elite xd rapidstrike had a slower rof as the original

[@Bleenga]

+Leaf Man nope they are exactly the same

[@brian8552]

The link for the fake batteries goes to a different amazon link

[@Bleenga]

That's crazy! Thanks for letting me know. They must have switched the listing. I fixed it now, though. So you can click the new link and check it out.

[@billyb4990]

Where can you get these batteries now?

[@Bleenga]

check the links in my description. don't know if they still have them in stock, though, but you can check

[@aolener]

He mixed batteries!!

[@Bleenga]

+Alexander Olener Yup! And you see what happens when you mix batteries... You will get shot down. Hard.

[@alpha4485]

I want to buy this but Amazon said it wasn't in stock and can't find anywhere can you help me

[@Bleenga]

+Thatonekid G I've just built a working list of parts so that you can get everything offered in this kit. Check the links in the description up above.

[@alpha4485]

+Nerf Gun Attachments thank you

[@alpha4485]

+Nerf Gun Attachments are you selling any of your Nerf blasters

[@Bleenga]

Thatonekid G No, I don't sell blasters. But, I do giveaways sometimes...

[@ishaansharma8164]

hey where could i get these batteries?

[@Bleenga]

I have some links up in the video description that should point you in the right direction

[@eric9385]

have you tried with 3 batteries instead of 2?

[@eric9385]

I wonder if it would be a big difference with a resistor removal and 3 ultrafires compared to the stock rapidstrike with 2

[@Bleenga]

+eric9385 it would definitely make a difference, but Like you said ... you'd have to disable or remove the resistors/thermistors. This kit is just an easy drop in kit for people who may not want to open up their blaster

[@eric9385]

Nerf Gun Attachments Yeah, I understand. but still... for a drop in mod that's a night and day difference

[@zocide]

does this work with 3 imrs?

[@Bleenga]

+IdenticalDragon not without a rewire, methinks

[@Damian-iz8ul]

how you gat the KIT

[@Bleenga]

+DamianPlays MC Amazon sells it, there's a link in the description -- Check it out

[@domezitrone544]

What the fuck how fast is this blaste after the batterie tuning😱😱

[@Bleenga]

+Dome Zitrone yeah, man. IMR batteries are really great.

[@zayanh2823]

Did you have to modify it (rapid strike

[@Bleenga]

+Zayan Hussain no. If you watch the whole video, you can see me do everything from start to finish. This is just a drop in kit.

[@zayanh2823]

+Nerf Gun Attachments ok thanks blee

[@Bleenga]

+Zayan Hussain No problem. Leave a Like :-)

[@dshin2611]

by any chance do you know when the kit will be back in stock?

[@Bleenga]

+BipolarBear Gaming Probably never. The owner seems to get overwhelmed with running the business at times. I e-mailed him, but he never got back to me this time. I set up an alternate list of parts that you can buy for around the same total cost, and that will get you right up to the same level of performance.

[@dshin2611]

+Nerf Gun Attachments okay thank you keep making great videos!! :)

[@Bleenga]

BipolarBear Gaming thanks! I forgot to mention that the list of parts is up in the video description if you wanted to check it out... Thanks for the support and I definitely appreciate your viewership!

[@bambu3dx633]

+Nerf Gun Attachments if they are out of stock where can i buy them i live in london do they ship over there?

[@bambu3dx633]

+Nerf Gun Attachments ohhhhh so i can buy each but in the description yay

[@rainxlegend6927]

does anyone know if the kit works with the stampede?

[@Bleenga]

+Seth Wood well this kit only comes with 2 IMR batteries, 2 dummy batteries,and 4 C sized battery sleeves... The Stampede needs 6 D sized batteries. But if you buy the separate pieces like I've linked to in the description for this video, and buy D sized battery spacer sleeves instead of C, it should work. But don't forget that when you increase the voltage, you'll also want to increase the spring power, too....

[@rainxlegend6927]

+Nerf Gun Attachments okay thanks for the advice. p.s liked the video

[@Bleenga]

Seth Wood thanks for the support!

[@alienxzxz]

Where do I buy the kit from

[@Bleenga]

Unfortunately this kit no longer exists as the company went out of business, but I’ve listed comparable items in the video description - you can buy those and get the same effect

[@alienxzxz]

@@Bleenga oh ok ty bro

[@Bleenga]

no problem, man. thank me by subscribing lol@@alienxzxz

[@alienxzxz]

@@Bleenga ok

[@alienxzxz]

@@Bleenga lol

[@condie9762]

does anyone realise wats happning . there just incredibly over charged rechargable aa

[@Bleenga]

no they aren't LOL

[@jaferlastname1760]

Imma put 3x 18650 batterys in my stryfe.

[@Bleenga]

NotaHipster you're probably going to need to do a re-wire for 3

[@jaferlastname1760]

Nerf Gun Attachments I already did a rewire with 16 guage.

[@Bleenga]

+NotaHipster oh, nice. Go for it then. Tag me on FB or IG if you put a pic up

[@davygravy8426]

Could I use old dead AA batteries instead of dummy?

[@Bleenga]

Probably, but I wouldn't recommend it. The dummy batteries are super cheap, check the link up in the video description...

[@davygravy8426]

Nerf Gun Attachments $7 is not cheap. Dead batteries have the same function and is way cheaper

[@Bleenga]

If you were already so sure about it, then why did you ask me? Dead batteries can still be dangerous. You're never supposed to mix battery chemistries. And how can you be sure the dead batteries are completely dead? Batteries, even dead ones, can leak and degrade over time. Dangerous stuff. Dummy batteries are just there to conduct the current, they pose no risk. Stop being cheap and buy some dummy batteries. Lol. PS - If you still want to be cheap, I'd recommend eBay. See here: ebay.to/2jjtUir

[@davygravy8426]

Nerf Gun Attachments cheaper, but I don't have a will to live anyways so If i die by my rapidfire it's a win win

[@Bleenga]

Lol, don't say that, bro! Life is always worth living. Besides, if you mix batteries, they will catch fire before they explode and then you can just throw your blaster. Only the blaster will die.

[@Izzys]

if u could that would be epic

[@Bleenga]

i'll try my best!

[@jaylengraves1903]

How much does this cost

[@Bleenga]

links for everything are in the description, thanks

[@ishaansharma8164]

they are awsm

[@Bleenga]

heck yeah they are

[@brian8552]

For my stryfe, this would be fine, right? I just don’t use the converters

[@Bleenga]

Yes, this would be fine. That's right, no need for the battery spacers/converters. Just make sure you don't buy flat top IMR's, make sure it says Button Top.

[@DayeanT]

Nerf Gun Attachments why you cant buy flat top imrs??? With 2 button dummy battery should work.

[@Bleenga]

No, it still wouldn't fit. Lol. You'd have to put tinfoil or something in there to bridge the gap. Just buy button tops, they're all around the same price...

[@DayeanT]

Nerf Gun Attachments I live in Poland... I didn't found any button top imr that ships to Poland

[@Bleenga]

DayeanT try this company Blasterparts - they are based in Germany and they sell very similar voltage mod kits for all types of blasters. blasterparts.com/modification?type=174

[@markusmayer4363]

how mich volt dose it have now

[@jesselam5867]

14.4 volts

[@LeoDDJ]

Markus Mayer: Jesse is wrong, it runs on 7.4V (2 real Li-Ion cells, 2 dummy batteries)

[@Bleenga]

yes

[@littleman2098]

okay thanks

[@Bleenga]

you're welcome

[@wastefulslayer8755]

Where do you buy the mod kit

[@Bleenga]

+wasteful slayer check the description

[@Minecraftpro694]

Could you give me link with the imrs on Amazon? I prefer to use Amazon over eBay, Thanks in advance!

[@Bleenga]

I wasn't able to find the exact batteries on Amazon. As for 700 vs 650 mAh, no that shouldn't matter much. Does it say 14500? And are they button top batteries?

[@Minecraftpro694]

I found some but they're not 700 mAh but 2000! Is that gonna burn out my motors or break something inside of my nerf? I know mAh is how long the battery lasts the voltage is 3.7 is that all that matters to increase the fir rate and mAh is just how long I'll be able to fire the blaster for ? I know there's a lot of questions but I don't want my rapid strike to just break on me and will the batteries work on my stryfe too?

[@Bleenga]

Dylan C technically that's correct... but I dunno. I'm not sure you should risk it without a rewire... and then you should probably just get a Lipo battery. A big problem with Trustfires or IMR's is that companies make cheap knockoffs with labels that aren't accurate as far as voltage or mAh or whatever... Just buy the right batteries from eBay. Lol.

[@Minecraftpro694]

+Nerf Gun Attachments thanks (: and you earned a sub from me have a good day !(:

[@Bleenga]

Dylan C awesome, thanks for the support!

[@sidehustleheaven1]

Where'd u get that

[@Bleenga]

+TheSniper 16 they don't make it anymore, but I've linked to very similar items you can get for the same price at Amazon and eBay. Check the description box up above

[@sidehustleheaven1]

Nerf Gun Attachments thanks!!

[@sidehustleheaven1]

Nerf Gun Attachments Do the first ones you linked have the cylinders?

[@Bleenga]

TheSniper 16 no, you have to buy the cylinders separate. Everything there is separate, but it all adds up to around the same price as the kit was

[@creatorCr]

Funny

[@blue69422]

its just AA battery's and pvs

[@Bleenga]

yeah! except it's not AA batteries or PVC. lol

[@blue69422]

Wel it is kinda

[@wlgs3763]

dat voice tho

[@gabrieltomic9640]

I'm running my Rapidstrike on 4s 2200 mah lipo😂

[@Bleenga]

Yesssssssss

[@creambaeggie7228]

I..... burned my motors with two 11.1v lipo powers batteries for my rc Cessna 182 plane I was shocked I used that for only two days and it burned

[@ahbsjhbibwywbyiw4288]

DOGE music TV did you use these ones | The ones he used in the video?

[@LeoDDJ]

DOGE music TV: 11.1V are 3S (3 cell LiPo batteries). Nerf guns are meant for at most 6V. Running it on 2S (what he uses in the video) will only overvolt it to 7.4V, which is definitely more than the recommended 6V, but if you don't let the motors run too long without letting them cool in between, it shouldn't destroy the motors as you did with almost double (!!) the recommended voltage.

[@blue69422]

I mean pvc

[@Bleenga]

true

[@Christian.733]

Fortnite be like .... 0:50

[@Bleenga]

I must not have played enough Fortnite lmao... if you like cringe skits like this, check out my new one: kzbin.info/www/bejne/jWO9pKqBfKpna6M

[@septiceclipes8544]

is this a joke what the f*ck

[@Bleenga]

I don't know, man, is it?!

[@hven11]

Vai queimar a nerf kkkll

[@Bleenga]

no

[@m4gn3tic82]

You are wearing gloves like a thief

[@Bleenga]

M4GN3TICPLAYZ ;D because I’m about to steal the hearts of all of the subscribers on KZbin

[@tinopimpo]

imr battery is not for this use! if a short and boom!

[@Bleenga]

you're silly.

[@EstCrossings]

trustfires are worse their claims are false

[@tikobeeco]

you had two differant types of batteries in one toy thats why they failed you

[@domezitrone544]

What the fuck how fast is this blaste after the batterie tuning😱😱

[@redninjaproductions9682]

Upgraded batteries, the voltage makes the blaster shoot faster, and further.