Nerf Stampede Full Brass Breech Overview

I hope you enjoy this overview of my own design for the brass breech Stampede modification.
This video goes deep into how this modification can be done with half darts and why it's always been such a challenge to achieve!
If you liked this vid then consider subscribing for future uploads....
Cheers, Nerfeus.

[@Kuli24000]

Best video ever. I was JUST thinking of doing exactly this style of brass breech with a 9/16 barrel and 17/32 pusher, so your wishing to do so confirmed it in my mind. Thanks for the vid!

[@MinistryofFoam]

Great video. Thanks for explaining all the inner workings of this classic AEB. 130fps is perfect for those CQB games.

[@nerfeusdadimus]

No probs! I think I could've been clearer, but Im still getting used to this talking thing 🤣🤣

[@ALPHA.Mods.1]

hahah! love the execution of this!

[@nerfeusdadimus]

Its definitely a very fun build to finally have made! Thanks

[@Kuli24000]

All done the 9/16 barrel, 17/32 pusher mod, but haven't tested it yet. Tested it. The stock return spring isn't enough and using the stock main spring as a return spring doesn't fit over the plunger tube nubbin, so I think it'll completely compress and break the 2 orange ring halves if I try it.

[@nerfeusdadimus]

You can samd down the ring of plastic at the front of the plunger tube so it fits over properly. Also you can cut a coil or two from the return spring. Remove the main spring and test by hand with the blaster open

[@Kuli24000]

@@nerfeusdadimus I just ended up buying the worker bolt reset spring. Hopefully solves everything. Thanks for your time! And btw, your black screw idea is pure brilliance. I used a screw as well now since the plastic I glued in just breaks every time.

[@jessefrendo9510]

Loved the video, how do we go about discussing a commissioned build?

[@nerfeusdadimus]

Hi Jesse, I dont take commissions at the moment other than local club members. Glad you liked the vid though!

[@jessefrendo9510]

@@nerfeusdadimus you sounded like an aussie (unless I'm wrong) where is your club based?

[@nerfeusdadimus]

@@jessefrendo9510 I am an Aussie! I'm in Central Victoria. I didn't mean to be quite so abrupt before, I'm in the middle of three commissions for members atm. I should've said, I'm not *currently* taking commissions until I clear my backlog, and I dont usually take commissions from non members. If you're in Australia though, I may be able to help down the track

[@pauseyourfeelings5227]

How long is the brass on the plunger tube

[@nerfeusdadimus]

I will need to measure for you, but essentially it is long enough so that when the bolt is fully retracted, the pusher doesn't interfere with darts being chambered