Netbox Rack and Stack

[@stampeder1686]

Comment about rack numbering. The reason for numbering from the bottom up is that in a central office or pop site, not all the racks are the same height. If you start from the bottom then you don't have to worry about rack unit 1 turning up at different heights. It makes life a WHOLE lot easier......

[@BrianThomas]

Manufacturers sometimes make it really difficult to get your hands in there to pull out the actual cable once it installed.

[@FireFish5000]

Example of components being different than template. 24P Keystone Patch Pannel. You can always remove a keystone and replace it with an hdmi, usb, whatever. Or perhaps you punched port 24 of your regular patch panel with crossover for your server. Or punched 23 and 24 together to be a straight-through jump. or 23-24 together A-B to be an instant crossover since you always lose those.

[@demolitionfc]

Great series. I'm still curious how to best handle stacked switches.

[@ZubaidaAyobe]

how can add management ip to device please tell me need to that

[@agent6box]

Here is a large list of pre made device types you can import what you need. github.com/netbox-community/devicetype-library/tree/master/device-types