That little anecdote at the end about auto MDI-X saved me. I was freaking out and questioning myself why I'm able to use a straight UTP to establish comms. between two PCs. Thank you for the informative video
@rendog311rendog26 жыл бұрын
very good and proper explanation Kevin! You rock man! Thanks for sharing your knowledge with us.
@fedric5882 Жыл бұрын
😅
@gabrielphiri33432 жыл бұрын
I understood this video like the back of my hand ✋ You are quite the teacher. Thank you Buddy
@SomeGuyWatchingYoutube6 ай бұрын
I cut a 4-wire 100BASE-TX riser cable with the goal of reducing cross talk and collisions for the Nintendo Switch. I also cut a crossover gigabit riser for my fiber router's connection to its ONT. The new setup is working as well as my fq_codel setup. Games are smooth as butter. I think the wires also help load balance which cpus are used by the Nintendo and the Router+ONT. Thanks for your awesome wire setup.
@misterdumas763 жыл бұрын
Great explanation, and such a beautiful, beautiful voice.
@svampebob0075 жыл бұрын
really great video, I love the ending! I was sitting here wondering if I really did mess up my network because I used just straight cables... Everything seems to work just fine, but I've been watching this detailed video for 6 minutes and I'm starting to question my knowledge... oh nvm auto MDI-x! towards the end I was also getting frustrated because it seemed obvious that it should be automatic, consumers are easily confused like me! :)
@Mike-kr5dn3 жыл бұрын
Omg I was dying until the end haha
@griver007able9 ай бұрын
Wow. You save me a whole semester.
@ikhwanalbadar9064 жыл бұрын
Amazing video, clear and concise!!
@DanielTekmyster6 жыл бұрын
Glad to see a good video explaining the basics... i can now put together a curriculum for interns 😁
@muniyappanarumugam72523 жыл бұрын
5t5 un un
@redabahlas3 ай бұрын
Thank you so much dear Prof./Techncien for the explaination. Could you tell me what is the diference between using straight through and crossover when we connect two switches ? is there any diference?
@paulonvula23012 жыл бұрын
Beautifully explained! Thank you very much!
@BosshafterAccount5 жыл бұрын
Best Explantation I have found.
@oryanatutube3 ай бұрын
Excellent tutorial.
@SomeGuyWatchingYoutube6 ай бұрын
Again, thanks!
@jaisonj19826 жыл бұрын
Thank you Kevin for the video. Clear and concise. It'd be really good if u would group the videos into logical and relevant playlists.
@mikrowellen29206 жыл бұрын
Brilliant video, thanks man, you really helped me out there!!! :)
@SrtRacerBoy5 жыл бұрын
I hooked a switch to a switch and used a straight through cable, and everything worked. just came here to see if I needed to switch that over, I guess I dont need to.
@svampebob0075 жыл бұрын
me to :D
@Zakeusa4 жыл бұрын
Cisco switches have a feature called auto-mdix that notices when the wrong cable is used and automatically changes its logic to make the link work.
@eriknilsson50483 жыл бұрын
Mind blown! Great upload.
@rietta11663 жыл бұрын
Thankyou for explaining so well.🙏
@emanence53 жыл бұрын
Great video Kevin. Explained it very clearly 👍
@rabeebibrat18053 жыл бұрын
Thanks for the clear explanation
@Cateyes91453 жыл бұрын
Thanks for the information I didn’t know what (Pass x over ) was on my Klein VDV Scout Pro2.
@farokrachid Жыл бұрын
Thanks
@diederikmuld3r4 жыл бұрын
I was wondering.. Why is every full color wire a - polarity except for the full blue one? It hurts my OCD :( They better have a good reason for it! :D
@kitumbadavid51815 жыл бұрын
Thank you very much,, well explained, i have one question though. what is the use of pair 4&5 and pai5r 7&8?
@shadowmane554 жыл бұрын
Great video. Thank you
@kwallaceccie4 жыл бұрын
You're very welcome! I'm glad you enjoyed the training.
@tabeshforoughi13802 жыл бұрын
Thank You, Sir.
@train49054 жыл бұрын
A superb video sir.thankyou kindly.has come in most handy.
@Icey-s5 жыл бұрын
very clear explanation. Thank you
@kitumbadavid51815 жыл бұрын
what an explanation !! so clear..thanks
@jacquelinekahigi85443 жыл бұрын
thanks very educative
@ayushs_2k42 жыл бұрын
What should i buy for home ethernet router to Laptop and if I can use the same cable for connecting computer to computer
@kwallaceccie2 жыл бұрын
Typically, a port on a home router is pinned out like a switch port, which would use a straight-through cable. However, a PC-to-PC connection would use a crossover cable.
@isaacdilnesaw32454 жыл бұрын
tnx so much i couldn't get it when my teacher explained it
@ahmadalturk91276 жыл бұрын
Amazing and valuable information as usual Sir.. thanks
@viduranga12203 жыл бұрын
Super explanation thanks 🔥🔥🔥
@phillychannel3942 жыл бұрын
My inexperienced co-workers used crossover cable in our network ranging from 4th, 3rd to 2nd floor in many different rooms/offices which were interconnect through several switches and routers and claim the cabling method they used are the correct method. I tried to tell them it isn't the proper method but they won't listen. Ridiculous.
@RoyBrown777 Жыл бұрын
The roll of the piiiyaannnnss
@kvivek173 Жыл бұрын
Which cable will be use to connect Layer 2 switch to Layer 3 switch ? Answer ? 🤔🤔
@kwallaceccie Жыл бұрын
Assuming MDIX is enabled, a port speed not exceeding 10Gbps, and a distance not exceeding 37m, a straight through Cat 6 Ethernet cable should do the trick. (or a crossover cable if MDIX is not enabled)
@zachattack3274 жыл бұрын
Hello I am curious on what happens on the T+ to R+ white and orange wire compared to the T- to R-. Im guessing that it’s the - voltage on orange and + voltage on orange and white. can you please tell me how data transfer is different between the two due to the polarity difference regardless that they both have R on one end and T on another?Thank you
@granvillebarraclough88464 жыл бұрын
Am no expert but the T568B to T568A crossover (green and orange swapped over) doesn't seem to work for the 8 pin data crossover.
@mq91674 жыл бұрын
Good Job.
@Popart-xh2fd Жыл бұрын
Does crossovering makes sense to gigabit connections?
@Secretcodrin Жыл бұрын
I'm a bit confused on why he said Media Dependent Interface instead of Medium Dependent Interface?
@just_for_share66806 жыл бұрын
Thanks very much Kevin I want to ask you about other file use it for what for example 4-5-7-8 .
@kallikantzaros5 жыл бұрын
Thank you so much
@Zipstone2 жыл бұрын
Your accent is awesome
@Sirrom53 жыл бұрын
Some internet reviews probably issued by amateurs reports the lost two brown wires reverse.
@5thpixel9 ай бұрын
nice!
@arjumandvillagecooking3 жыл бұрын
wonderful explanation as usual👍 stay bless
@Alien-Networking3 жыл бұрын
I'm confused! Why all those guys who show how to make a crossover cable do not flip the pins 4-5 and 7-8??
@sohailjanjua1235 жыл бұрын
Hi i like your video
@rafiqahmedbhatti46075 жыл бұрын
Nice video but no one is explaining about the pair 4,5 & 7,8
@kongol50363 жыл бұрын
No wonder when I had to copy an imac to another imac it wanted me to just use a patch cable. Pretty cool, didn't know about the auto mdi-x
@andycelis5183 жыл бұрын
What if we switch blue with green, so that we now have pairs of orange, pairs of green, pairs of blue, and pairs of brown? IEEE: where is your current location sir? (Calls FBI)
@kerndesertpreppers12742 жыл бұрын
My head hurts 🤣
@StormyHotwolf885 жыл бұрын
LOL, I'm so angry, why couldn't someone explain it like this rather then just be, "See this? do that"