Your content gave me the basic knowledge and confidence to apply for a job at an ISP. 7 months strong working at an ISP thanks to you 💯
@saulgoodmansfingerr852711 ай бұрын
Without any certs??
@corbinrivera632611 ай бұрын
@@saulgoodmansfingerr8527 no certs. I’m going on 2 years now
@Amit_Bedrak5 ай бұрын
Yeah its unlikely.. this is not how the worl works@@saulgoodmansfingerr8527
@Creshendo6803 жыл бұрын
Chuck i have to say watching your videos is always entertaining. I think you make a great teacher in the I.T world when it comes to explaining and show how things work. I've had teachers before just as dull as can be and it's like you can't get interested into learning due to how it's presented to you. I watch your video and the way you explain things and the personality is upbeat and fun it makes a WORLD of difference. Thank you for all the time you take out to provide and upload this content! I've definitely learned more here than i have anywhere else!
@roccomicucci82072 жыл бұрын
Why even bother going to school just watch these videos they are beyond great. Thank you so much !
@roxannemeijer18512 жыл бұрын
I’m a datacenter engineer at the Netherlands but a beginner. Your series are really helping me! I just build a new setup on my own 😃
@Kaspaverse2 жыл бұрын
Data center technician from Germany. I love working in the DCs :D
@francek38922 жыл бұрын
Hi I'm studying to become a engineer also for this stuff with Data and Networks. My question evan if I also like this stuff, what is the best and what is the worst part of the job? How much do you work every day? Is it stressful? What are those things that you think we all should know before finnishing college for this or before getting that kind of job?
@christiancepeda54572 жыл бұрын
@@francek3892 it's a hungry field. keep up with everything and better yourself each day. you will be asked to do things outside your scope of work. you have to be self-sufficient.
@aaadiiivedious1259 Жыл бұрын
What are the basic requirements to get as a datacenter engineer.
@perad1895 Жыл бұрын
@@aaadiiivedious1259 it varies with DC's....but it's say learn about the basic PC/Server components and what they do.... learn basic Linux/Windows commands and learn basic DC acronynyms and what they do for starters.
@bhagiyarajmahesh89723 жыл бұрын
7:42 **Optical Fibers are based on Total Internal Reflection** Not Total Internal refraction.
@stevecarr43613 жыл бұрын
I was just about to comment this lol, the light refracts once you pass the critical angle and it refracts through the cladding which is how we test for traffic on the fibre in the field with a traffic identifier.
@dr.rogersnyuy47423 ай бұрын
Correct
@EricTorres7133 жыл бұрын
😆 “I’m about to make my family upset” famous last words
@DanielTekmyster3 жыл бұрын
as his poor daughter stood staring at a frozen screen LOL
@XzTS-Roostro3 жыл бұрын
I love how his daugher turns around with the look of "I'm gonna kick your ass"
@jamest30933 жыл бұрын
As a fibre installer i was saying to myself "don't you dare pull that out" and as it zoomed in on the ONT i knew it was inevitable hahaha!
@KenSherman Жыл бұрын
@@jamest3093 Did it make you cringe😬 when he bent it like this (7:00)? 😅
@NetworkChuck3 жыл бұрын
Ready to get your CCNA? CCNP? Use the BEST tools: bit.ly/bosonexsimccna (Boson ExSim) (affiliate) Watch the whole course: bit.ly/nc-ccna Go deeper: ntck.co/ncccna 🔥🔥Join the NetworkChuck Academy!: ntck.co/NCAcademy 💯💯TEST your skills, see what you got: ntck.co/ccnaep13 (be the first to complete the quiz and get some FREE coffee) **Sponsored by Boson Software It's time to get your CCNA! --------------------------------------------------- ►Watch the whole course: bit.ly/nc-ccna ►CCNA Courseware: bit.ly/boson_cw (Boson) (Affiliate) ►CCNA Lab: bit.ly/bosonccna2020 (Boson NetSim) (affiliate) ►CCNA Practice Exam: bit.ly/bosonexsimccna (Boson ExSim) (affiliate) ►CCNP Lab: bit.ly/encornetsim (Boson NetSim) (affiliate) ►CCNP Practice Exam: bit.ly/encorexsim (Boson ExSim) (affiliate) SUPPORT NETWORKCHUCK --------------------------------------------------- ➡️NetworkChuck membership: bit.ly/3riRhek ☕☕ COFFEE and MERCH: NetworkChuck.coffee Check out my new channel, bit.ly/nc_clips 🆘🆘NEED HELP?? Join the Discord Server: discord.gg/networkchuck STUDY WITH ME on Twitch: bit.ly/nc_twitch READY TO LEARN?? --------------------------------------------------- -Learn Python: bit.ly/3rzZjzz -Get your CCNA: bit.ly/nc-ccna FOLLOW ME EVERYWHERE --------------------------------------------------- Instagram: instagram.com/networkchuck/ Twitter: twitter.com/networkchuck Facebook: facebook.com/NetworkChuck/ Join the Discord server: bit.ly/nc-discord 0:00 ⏩ Intro 2:13 ⏩ Why Fiber uses light 3:02 ⏩ Why FIBER is AMAZING!! 4:33 ⏩ how Fiber Optics work 4:53 ⏩ Multimode Fiber 8:55 ⏩ Single mode Fiber 10:53 ⏩ Multimode VS Single Mode Fiber 13:35 ⏩ Fiber connectors
@kingorialex69903 жыл бұрын
That was amazing 👌👌👌👌👌👌. Fibre is just awesome.
@suresh-gq3id3 жыл бұрын
Can you please make video on "bug bounty for beginners".
@rationalbushcraft3 жыл бұрын
When I was in college they taught us how to polish fiber using very fine grade sandpaper. Talk about a waste of time. I have never done that in the real world. That was over 20 years ago.
@deepug923 жыл бұрын
It tis Total Internal Reflection Not Refraction
@boneitch3 жыл бұрын
If there's an audio book version with you as the narrator, I might actually get through this stuff
@jonathanblomberg3 жыл бұрын
Hey Chuck, I work with fiber, installing it in apartments and fusing fiber together is quite simple tbh, you only need a expensive machine, but anyone can do it.
@canwenot5733 жыл бұрын
Right? I've polished more end surfaces than I can count. Lapping paper and a puck for the connectors you're working with aren't expensive and using them isn't particularly difficult, but tedious. The epoxy fumes are the worst, though. Fusion splices are expensive, but like you said, they aren't too hard to use once you know what you're doing. When Chuck said he couldn't terminate fiber, I was like, "Really? Is it that difficult for people?"
@semgas3 жыл бұрын
@@canwenot573 Fujikura for the win! Not a tech anymore but yeah, it's quite easy except when it's freezing, raining and you're 7m high on an inclined ladder with a harness , strapped to a pole. Been there, done that.
@canwenot5733 жыл бұрын
@@semgas Especially when the cable is barely within reach and you're having to fumble around, hoping you don't drop your tools!
@justthisguy3 жыл бұрын
I've worked with a few butchers in my time that would make your anyone can do it statement false :P
@cameronwashere38503 жыл бұрын
I too work with Fiber. This statement is true as long as you are splicing but you always have "quick connectors", given where I am we typically use SC/APC connectors and that is very easy and cheap to do. Your biggest expense would be the fiber itself.
@Quilla9993 жыл бұрын
yessss please keep doing these!! i’m learning so much i hope to get my CCNA soon idk if i can try bc i’m 16 but i’m definitely gonna be ready to get it i’m studying so much!
@Quilla9993 жыл бұрын
ps. ur the best teacher nobody teaches better than you, you explain everything very well and relate stuff to other stuff to help remember things idk ur just very good at teaching this stuff i appreciate it chuck love ya man!
@housemashups40153 жыл бұрын
@Quilla I am going for my CCNA aswell. Good luck !
@Quilla9993 жыл бұрын
@@housemashups4015 You to man!!
@merhaiakshay96253 жыл бұрын
is CCNA still valid and supported course, i thought ccna is gone , as chuck said it in one of his videos
@bassam_salim3 жыл бұрын
@@merhaiakshay9625 link please As far as I know CCNA is the best network cert out there, maybe you think about CCIE (or something like that) which is tge cert before it which you don't actually need
@dizzylbnt3 жыл бұрын
What a cool dad and a cool dude! I cannot tell you just how hyped I was learning about what fiber optic cables actually are, simply bouncing off the incredible energy of this video! Awesome, awesome video, and so simple that even I got it
@jonassonck26943 жыл бұрын
Oh, I wish you posted this video 2 weeks ago when I was troubleshooting a fiber issue at a customer. I found the solution tho! I still watched and enjoyed every second of your video! Keep up the amazing work!
@kingneutron1 Жыл бұрын
Thanks!
@jtelevenoyd15713 жыл бұрын
Been binging your channel. It's the most useful set of tech info I've seen in a long time, and by far the most engagingly presented. I don't make a living in IT per se, but in an adjacent field that has me interacting with IT people a lot and using several of the same tools they do. Just knowing what they're talking about when they start slinging acronyms helps tremendously. And now I really am thinking about pursuing a few certifications just because they're interesting. Kudos!
@geekdownrange3 жыл бұрын
- Distance for multimode is often limited by dispersion rather than attenuation. - If you get into a situation where you need some attenuation (LR optics on a short run) wrapping the jumper around a pencil then taping it down works in a pinch. - Fun memory aid for remembering the connector types: ST - Stick and Twist. SC - Stick and Click. LC - Little Click Great content as always. Fiber gets complex fast.
@peterkaloczkai2 жыл бұрын
Nice aid. Fiber technician here, I laughed so hard because of the little click. 😂
@dontlookatme3816 Жыл бұрын
I use Stab and Twist and Stab and Click to remember.
@ivarmh2 жыл бұрын
Awesome video @NetworkChuck. Thanks man. I've been working with fiber a few years but it's always nice to see new takes on this material. Good job! For a long time I had trouble remembering what connector was named what as you (in most cases) have the three connectors you mentioned that have a two-letter abbreviation and they are kind of similar. Luckily one of my colleagues told me this nice way to tell them appart ST = 'stick and twist' as you turn the connector to lock it like a small BNC SC = 'stick and click' as it clicks in like an RJ45 but without the tap LC = 'little click' beckause it's the smallest and it goes click. Hope this helps someone at some point. Sure did for me.
@victorjaramillo858 Жыл бұрын
Network Chuck. My teacher from tech school told me about you. She once said "Victor, don't settle for geek squad, or genius, you're meant to start off as a Junior". I took networking as a career path and landed a great Junior network engineer job. I've been watching your videos lately to get up to speed with things. Your videos these past few days have been a great help. Thank you.
@MarkusMayrl3 жыл бұрын
I like you excitement when explaining these things. I understand that you had to explain these things in a simple way. One comment to your statements around Multimode core typically being made from plastic: That is rather rare and only in use for very short connections. Mainly for things like audio transmissions or other special applications. In standard networking fiber cables you will only find glass cores. Also, the price difference between Single Mode and Multi Mode in the cables themselves is very small, but the transceivers (most commonly SFPs) still have a big difference in price from most vendors. What I would have loved to hear mentioned would be a "how to handle fibers", because I have seen so many problems with people mishandling fibers. Macrobends and microbends because of people not taking care of minimum bend radius, and the way you kept touching the connectors you will not be happy about the attenuation. You are not supposed to touch the end faces of fiber connectors, and you should clean them correctly. If you have ever seen a connector endface with a microscope after having touched it just once you will know what I am talking about. :-)
@emmykkins3 жыл бұрын
I love when you use your kids to explain because as a momma of 3 i feel the explanation in my core and it burns into my brain!
@Grumpybhoy392 жыл бұрын
Great content! Been installing/testing/splicing Fiber for 20yrs in the oilfield. ST is used on most test boxes for subsea structures, but LC is used in the cabinets in the Platform.
@theresavoltz3358 Жыл бұрын
I am a high school computer teacher in an inner city high school and your explanations are AWESOME! The way you simplify complex concepts is exceptional! Thank-you!
@NetworkBruh3 жыл бұрын
Awesome video Chuck!!! You made so many points that I made in my Fiber Optic video as well!! Glad you're continuing this Free CCNA Course!!!!!
@nicholas18953 жыл бұрын
This was the best video I've seen on fiber cables, which otherwise have appeared a little intimidating to me. I had some trouble understanding the idea of the "transceiver" (the SFP) from my Net+ textbook , but seeing it used in person made it completely obvious that it's just a type of converter. Additionally, I appreciate how stoked this guy is on Networking.. it makes learning more fun! Thanks.
@BullCraftMaxx3 жыл бұрын
FINALLY! So excited for the continuation of this series!
@BL00MYB0Y2 жыл бұрын
I’m not in IT, I’m an HGV mechanic but I find this stuff fascinating, and you seem to be very passionate about what you do. I find you very interesting and humorous and you have a natural ability to teach this stuff. Great job 👌
@kieranferguson2633 жыл бұрын
just passed my comptia a+ moving onto ccna . thanks for all the content which is helping me along the way.
@NetworkChuck3 жыл бұрын
Great job!
@starkappeal5 ай бұрын
Awesome video. I am a fiber optic splicer/tester for a company in NYC. I am the supervisor for the department and we are contracted by Verizon and Altice to build there backbone networks underground in the Manhattan. I love to see videos explaining the tools and resources we use on a daily basis. I love your channel. I have tried some of the projects (running my own AI bot with Ollama through Docker for my kids to use when they need help with their homework) and learn much about other things watching your channel. Keep up the amazing work.
@brettgriffin4153 жыл бұрын
How long will this series be? Will chuck become the proffesor messer of CCNA? FIND OUT NEXT TIME ON DRAGON BALL Z!!!
@SONGOKU-tl3ht3 жыл бұрын
And I took that personally.
@aguy7x3 жыл бұрын
Working for AWS solving issues with u in the background, all thanks to ur CCNA videos motivating me 3 years ago. 10 certs a bachelors and 2 jobs later.... Thank you
@nyx2463 жыл бұрын
me with kbps download speed watching this on 360p: *interesting*
@boneitch3 жыл бұрын
That shows dedication and i think we should all appreciate that
@MeekzDigitalz3 жыл бұрын
totally apt
@EshanAdithaya3 жыл бұрын
lol
@pascalphilipp19103 жыл бұрын
You are from germany, aren't you? :D
@datmanmendis3 жыл бұрын
Only 5MB/s in Sri Lanka 😒😒
@zuribrownlee8623 жыл бұрын
I just wanted to thank you! I seen your help desk video & landed my first interview. I’ve been teaching myself Microsoft Azure for about 2 months now & I look forward to expanding.
@bassieboy64683 жыл бұрын
Just wanted to say that these are great videos, and you have always a great vibe. I learn so much more useful things from you than my school. You are the reason why I started learning hacking and this stuff. Keep up the good work my dude
@VinhNguyen-ul8yg2 жыл бұрын
Man your style of teaching is the best I have ever seen. Thanks.
@jeffmartin26753 жыл бұрын
Great content as always Chuck! Since this ties into the internet, would you mind doing a video about how the ISP and other services are able to bascially *generate* the internet that's sent to your home and corporations etc? The 30,000 ft view instead of the DC/home view. I'm an engineer myself and I have yet to find material that explains it concisely and think you would crush it!
@mohammedmohsin91122 жыл бұрын
did u find?
@fatmaalbaqshi67672 жыл бұрын
i have watched a lot and i mean A LOT of ccna videos you are the only one who explain things that are actually relevant A LOT of thanx all the way from Kuwait
@demandredlfc41803 жыл бұрын
Nice simple explanation (as usual) of most things about fiber cables. Thanks! But waiting for Ep. 2 of the same topic and talking about SFPs: simplex and duplex cables and connectors; pairs of simplex SFPs and how to buy and install them (1310nm Tx and 1550 Rx on one module and vice versa on another); does my Cisco switch support any SFP module from Aliexpress; will my Cisco switch with Cisco SFP talk to Fortinet firewall and Fortinet SFP on another side; and so on. Fiber is a really interesting topic to talk about. As for me, I start reading about it every time I have to touch it.
@rohityadav-ri4zi5 ай бұрын
I am a fiber technician, and make these fiber connector almost every other day. and it's not that difficult to make them, with right tools you can make them in minutes. Yes, those tools are expensive though, one will not get on amazon. Also, SFP are also called ONT (optical network terminal), converting signal from optical to electrical. Your course is amazing, learned lots of new things about network. Thank you so much for that.
@ahadislamshanto54783 жыл бұрын
Thanks man 🍻 i really need this kinda information on fiber, i hope you make another part on it about olt, onu, epon, gpon stuff. I used to be confused between single & multi mode fiber now it's cleared 👌
@PMPerformance3 жыл бұрын
I am glad you brought up the duplex comment , but everyone neglects to ever mention about having to flip fibers to avoid having a send signal on both sides and link not coming up. All CCNA material skips over this and this is crucial for everyone to know you can’t always just “plug it in” and get link
@chesanducharika3 жыл бұрын
waited for this video so long!You can make anything cool!
@RyanMuniak3 жыл бұрын
I have spliced fiber numerous times and can attest that it can be a huge pain in the butt! Great video, Chuck!
@francescopilla213 жыл бұрын
when it's going to be your Linux class because you are the best teacher sir I am learning from you thank you
@kristopherleslie83433 жыл бұрын
Very dope he is!
@kingalysterianlion55422 жыл бұрын
Hey! Thank you for your channel!!! In less than 24 hours your channel has become one of my top 5 channels because it’s just freaking awesome!
@nobertpatrick94603 жыл бұрын
This is exactly what I wanted...
@kastprod32873 жыл бұрын
You must have it in the street and also through your house cables...
@DanielTekmyster3 жыл бұрын
fun story, before i got into IT i bought a book called networking visually and learned all the connectors (LC was not out then). when i built my home lab during my first support job, i bought Cisco Catalyst 5505 switch with the 6 port Gbic module and bought cheap fiber cables on ebay and fiber cards for my PCs :)
@altuber99_athlete2 жыл бұрын
2:36 Actually, the speed of light is irrelevant when comparing it to copper/cable Internet. Waves of electric signals (voltages/current) also travel at the speed of light.
@martinvuyk53262 жыл бұрын
The electromagnetic wave is Electrons moving (close to the speed of light as Fermions are pretty light), but the material slows it down considerably more in comparison to light. So... the speed of light is relevant, as are the properties of the material transmiting it. And the fact that Photons interact with mediums much less than Electrons. en.wikipedia.org/wiki/Speed_of_electricity
@kathulemerald80002 жыл бұрын
@@martinvuyk5326 Would hurt like hell to theoretically touch a cable superconducted with photons. I don't even want to think about it. The sun inside a little wire...
@devlinmcguire75437 күн бұрын
Yeah. I know. It's not a matter of which travels faster, it's a problem of the medium slowing it down. Electricity still has to travel a physical medium. 🙃 Fiber optics are faster because it's based on confining and reflecting light, which travels a straighter path with fewer turns. Also physical material are more likely to lose energy to heat than FO, and thus lose information that needs to be reverse figured out on the other end, which takes more time.
@boneitch3 жыл бұрын
Your content has made me enthousiastic about stuff in a time i couldn't get excited about anything anymore. It changed me from not wanting to get out of bed anymore to having the motivation to work towards a better future. So thank you. Truly ♥️
@m.afnan20183 жыл бұрын
Sir, Amazing thumbnail, I think you are Peter McKinnon of photo editing also...
@NetworkChuck3 жыл бұрын
I appreciate that!
@aidantrip Жыл бұрын
Adavnced Networking Course in College: Chapter 1 - 12 Minute Video on Fiber Optics ---> Video feels like it was 30 minutes long *In my Recommended Bar After Watching The First Video* NetworkChuck's Video on Fiber Optics (19mins) -----> Video feels like it was 2 minutes long. Knowledge Obtained? 12 Min Video: 6/10 Chuck's Video: 1600/10 Thank you my man, for making my learning experience not feel like my skin is burning off from boredom.
@TuomasLevoniemi3 жыл бұрын
Why does everyone in the US have an unfinished garage? :D
@twinversbr3 жыл бұрын
Probably because everyone is in such a hurry to get in their house and don't really care about what the garage looks like
@Mkhwlani3 жыл бұрын
@@twinversbr Like… for the most part, it’s just a room to keep your car protected.
@bluk9t9 ай бұрын
I will be passing this video to our new Technicians. I have been doing Telecommunications for 24years now. Some of the information is more basic and general. But working in the data center capital of the world. I have stories to tell. But I started a Tech right out of high school. When I started most customers fiber circuits were 155Mbs (OC3), and 622Mbs (OC12). Now I install 10G, 100G, and 400G. The need for bandwidth has grown in the 24years. Also the more commonly use BIF (Bend Insensitive Fibers) reduces the micro bends. Sorry to ramble but good video and I know I know a lot of the technical spec. Also never look in the end of a fiber is a laser and will burn your eyes. Always use a light meter to measure the db levels.
@zayeddd3 жыл бұрын
Chuck: NEVER BEND A FIBER CABLE Also Chuck: *bending the cable aggressively* hahhahahhhahahhahah
@ralphmorales50823 жыл бұрын
You can vend fiber it dose have a breaking point.
@zayeddd3 жыл бұрын
@@ralphmorales5082 yea ik
@markarca63603 жыл бұрын
Snazzy Labs did made a video on that.
@iyeetsecurity9223 жыл бұрын
My doctor said I need more fiber, but none of the ISPs near me offer it. I don't know what I'm going to do!
@samsmith67912 жыл бұрын
I worked as a fiber splicer, and working with this type of technology is awesome!
@tectrainguy2 жыл бұрын
Sitting watching this on 1.1gpbs internet
@nabawi78 ай бұрын
I'm watching on 3Gbps up and 3Gbps down fibre
@dominiqueeybers91863 жыл бұрын
Work en everything was crazy and missed out on your video. Now i remember why i liked to watch it, even if you show something i already know. Always some fine detail i learn from. Thank you.
@jobin89283 жыл бұрын
Emi: electromagnetic interference.
@jobin89283 жыл бұрын
@Fravio Chuck said loss of data so it is interference.
@kurdishforex3 жыл бұрын
I graduated college IT department , but i learned more from this guy than college , great videos , keep going
@laddrop67793 жыл бұрын
When I finished my physics exam, I thought I will never have to hear about Refraction of light again, I thought wrong
@richstanton85453 жыл бұрын
LOL!! Well my (young?) friend, I loved the "never thought I'd hear refraction again" comment. Usually, as soon as one says "never" that word bites one in the butt. I usually say, "I won't say never, but the 'smart money' in Vegas won't cover that bet" 😱 I just subscribed to this channel because I happened to see Chuck's video on Raspberry Pi. Then found this video (AT&T has kept bugging me to upgrade to fiber) to be semi-informed. I'll do it eventually but hate waiting for installer. AT&T stood me up (never showed up) 3 different days when they rolled out DSL. years ago. Chuck appears to be a very good teacher from what I've seen so far, mainly because of his enthusiasm. This old dog might learn a new trick.
@shaunray783 жыл бұрын
A few things to point out. 1. Yes you can fix the fiber (unicam) 2. Bend insensitive fiber 3. Clean the fiber when you're unplugging it. 4. Nice video.
@markarca63603 жыл бұрын
Multimode - uses LED lights Single-Mode - uses lasers
@Felix-ve9hs3 жыл бұрын
Nope, a mode has nothing ro do with LEDs or Lasers, rather with how many "beams" of Light you have inside a cable Multimode can also use Lasers
@airron56983 жыл бұрын
@@Felix-ve9hs is right. Mark Arca is wrong
@68HC0603 жыл бұрын
In addition to the above two replies ... Lasers in switches, routers, media converters and transceivers *are* LEDs (eg. laser diodes). The difference between MMF and SMF are mainly the wavelengths. MMF (OM#) are usually 850nm, where SMF (OS#) are higher. In addition, OM2 fiber can usually be bent sharper than OS2.
@michaelmassetti40683 жыл бұрын
Simply put; a warp speed tutorial. Most excellent. I have used fibre optics for years in lighting styrene models along with leds etc. I have now att fibre internet in my home . Mostly wireless. Removing pot wire and wiring with cat5e(got it free) for prototyping boards etc.
@Hodenkobold4411 ай бұрын
Hello everybody my name is conducting wire
@liamrobinson14773 жыл бұрын
I'm a fiber engineer in the UK and i've been trying to teach myself more computer science (coding, hacking, networking ex) i've got to say you content has helped me so much :) you seem so excited about things that would usually seem boring, making them far more interesting and explaining things in a way that is easy to understand. one thing i will point out about this video is that you said EMI"s don"t affect fiber cables however we where always told not to route our fiber cables over electrical cables as EMI"s will affect them which is also why we have a set distance they must be from high voltage power line when using the same poles. also abit of info you might be interested in is, when running fiber cables outside the jacket of the cable must be UV protected as UV light can severely interrupt the connection let me know what you think ;)
@Stringfellow-xo6do2 жыл бұрын
Fibre is immune to EMI, you can run fibre inside a power cable (and it is) and it will not effect it in any way. I suspect the separation distance you were told to follow were either legacy values from copper cables, the fibre cable may have a metallic element (amour, strength member etc) and the distance is for electrical safety from induced currents, or general safety for workers to avoid them accidentally grabbing the HV cables. As for UV, its like your skin in the Sun. UV light will damage the outer sheath on a molecular level, creating weakness that could lead to damage to the fibre or water ingress into the cable. The UV light wont interfere with the transmission as it wont be able to penetrate the core of the fibre and fibre uses IR light which is at the opposite end the light spectrum.
@김주윤-n1t3 жыл бұрын
Wow imagine living with out internet
@davecarter41293 жыл бұрын
Go to North Korea lol
@nffan6963 жыл бұрын
Me *tear* lives in the us all I have is mobile data not even 5g just 4g and 3 bars of signal at most not even at&t not even TMobile but metro
@RAZREXE3 жыл бұрын
@PizzaBoss 🤣
@김주윤-n1t3 жыл бұрын
@PizzaBoss wow smart ass
@Furii0us2 жыл бұрын
07:35: "Turtle. - Lol. Says it twice more - Turtle. Turtle. Total Internal Refraction." These videos are so enjoyable while being super informative dude. It's under appreciated really.
@2011craggie3 жыл бұрын
Awesome video Chuck, just one point, its Total Internal REFLECTION, not Refraction..that is something else...Keep up the great work!!!
@atheleston3 жыл бұрын
I am a certified Fibre to the Home (FTTH) Technician. Great job with the explanation!
@danielpelfrey16563 жыл бұрын
Excellent video! You didn't mention safety with optics. Cutting fibers can cause glass shattering. Long range optics use different spectrum and intensity than short range optics. Short range is basically a red LED and harmless. Looking at long range can damage your eyes permanently. Color coded cables help but how can you be sure when what optics are on each side while troubleshooting? Don't look at it and use optical meter. Excellent video. I look forward to seeing you again at a future CiscoLive.
@bartoszkazmierczak72493 жыл бұрын
It's a shame this comment is so low! The fibers are so thin you may not notice dropping a tiny piece. That piece can later get under you skin and cause all sorts of medical issues. DON'T cut fiber unless you really have to and know what you're doing!
@4sam2wise183 жыл бұрын
Hey there! As a fiber optic field technician I have access to all these cool gadgets with microscope cameras showing the fiber splicing with plasma in real time. So cool. Love my job.
@TerryAssary Жыл бұрын
I work for ISP...the only issue with Fiber is damaged patch cord at the customer's house FTTH ... we use single mode everywhere even on the local network.. you've done so many research... nice video, simple explanations and everything is there
@zayeddd3 жыл бұрын
i also have fiber :) and FINALLY ANOTHER CCNA COURSE VIDEO!! i bought david bombal's CCNA course. i love CCNA (im 12) you've helped me so much! thank you chuck! Love From Dubaiii!
@EmperiorXGaming3 жыл бұрын
Bro i cant buy CCNA course as i in NEPAL.can you provide me a copy of it plzz.
@zayeddd3 жыл бұрын
@@EmperiorXGaming It's Only 1158 Nepalise Rupees! (9.99 USD)
@call-me-potato. Жыл бұрын
you are a real life hero. one of the greatest teacher in my life. thanks thanks thanks man
@digisleuth3 жыл бұрын
I just had my first day in the field as a fiber splicer, fun work!
@harryjohnson6153 жыл бұрын
Yeah until you're out at 3am in the middle of a hurricane trying to splice to restore a major outage 😀
@MrSwyc663 жыл бұрын
I got a hundred on your quiz. You are a great teacher. I understand stuff now I never thought I would. Thanks NC. Oh I also ordered a bag of that Mexican coffee. Can't wait to get it.
@UMG-Melons2 жыл бұрын
Good video, I just got gigabit fiber to the premises 5 months ago and it has been amazing compared to the previous DSL 9 mbps down and 0.81 mbps up that I had for a decade. I don't want to use any other internet medium besides fiber again.
@harrisongilbert3 жыл бұрын
Chuck, could you do a video on BGP and how it works on Cisco routers? I know how it generally works, but everywhere I go to find more about it, the explanation is so high-level and abstract. How do you actually use it on Cisco hardware?
@dariofairhall26953 жыл бұрын
Learning from Boson is awesome, but the way you teaches us we ❤ to learn from you. 😇
@dofrobaggins18832 жыл бұрын
I splice and terminate fiber for a living, it’s nice watching the excitement people get over it. Makes me feel like I’m doing something cool lol
@thomasamassey3 жыл бұрын
Hi there Chuck, it is actually total internal reflection - that occurs when the light goes beyond the critical angle :) glad I could help
@Albert_Einstein_3 жыл бұрын
yes
@ely-qx5eu3 жыл бұрын
I must say I have learned more from your videos than I have in my 4 year IT bachelors.
@thespecialchannel3 жыл бұрын
Your channel and this video specifically are just the heaven of nerds
@twilllinemanforhire62663 жыл бұрын
been building fiber for years... the new ADSS self support fiber is amazing
@aatifkhan669 Жыл бұрын
Hi NetworkChuck, Your Videos are really awesome, the way you teach, is really amazing. You use jokes in your videos which make them more interesting. I don't get bored watching your videos. I wish, I had a teacher like you in my school days. Learned a lot from your videos.😊
@Darkk69693 жыл бұрын
I have 10 gig fiber for my home lab connected to MikroTik switches. It's great connecting the workgroup switches to the core switch. Also, connecting to other switches several feet away. Fiber cable is not as fragile you may think it is. Don't bend them any less than 90 degrees radius and you'll be ok. All of my fiber cable is OM4 even though I am only using 10 gig because violet color cable looks cool. :)
@Randommusingsvideos3 жыл бұрын
Hey NetworkChuck, I've been avidly watching your CCNA playlist as I am preparing for a job interview to become a trainee Telcoms Network Engineer as a change of career. I've played with networking at home on a trial and error basis and using youtube and google to teach myself stuff over the years, however my hobby and interest has developed into a real desire to pursue this as a career, your videos are definetly helping with my interview prep for the training position - if I get it I'll be doing SCADA, CCNA and eventually CCNP. Hope I get the job!
@richardfancey9625 Жыл бұрын
Dude, I loved your video and the way you explain things. I just got a job at Cisco and loving everything about it. Please keep making videos. YOU ROCK!!!!
@speciosa1469 ай бұрын
I know im late to the video but i did want to say a little on making your own fiber cables. Yes, splicing fiber requires a specialized fusing machine and its something the average guy wont do. However, its very possible to put terminal ends on fiber. The kits are usually under a 100 dollars and once you get the hang of it you can make up a termination in about 5 minutes. Its a bit of a learning curve but its a alternative to buying all premade cables.
@PlaceholderforBjorn3 жыл бұрын
On my local island, all the small communities got together and asked the big telecom corporation to build fiber network over all the island. It was feasible because the communities got almost everyone to jump on the train. And you had to bind a contract with a perticular corporation, for five years if i remember correctly. So the internet infrastructure here is really good. This happened about 10years ago.
@montalbert3 жыл бұрын
The longer your videos are, the better
@Wav10001 Жыл бұрын
You would be surprised how easy it is to put new ends on those fibers with the right tools. You can be shown once or twice how to do it and probably fix it yourself. Although if you don’t have the tools, it’s probably cheaper just to buy a new patch cable. Also, I realize this video is somewhat old, but SFP+ transceivers come in BiDi flavors that do not require two fibers for full duplex connection. Super cool stuff. 🙂
@ericstyg3 жыл бұрын
I always enjoy your content. You explain things in ways people can understand and having an upbeat personality makes it enjoyable! I wish when I was going to school, that you would of been the professor. The professor I had spoke like an audio book and the device was running low on power! Lol Thank you for all that you do!
@adamherdman19353 жыл бұрын
Turns out you can in fact buy splicing tool kits on amazon. should you buy this though, absolutely not! reason being firstly without prior training, youll end up wasting a bunch of money attempting this, secondly even if you were trained to do such tasks, amazon is not the go to place for fibre splicing tools :D the only customers of these kinds of tools are those who work daily within this trade, therefore, you're gunna want something A) reliable, and B) long lasting/ robust. Ive seen these guys at work first hand in our new data centre.... theyre top notch and have the patience of a saint! Love your content NCHuck, keep it up (please).
@djohnsto22 жыл бұрын
Cool video!! As far as the cost of the actual cable, SM is cheaper. It's the transceivers at both ends that are more expensive with SM. But with cheaper modern laser tech, this is changing. Some new datacenters use SM (like CWDM4) instead of MM even for short runs because the SM glass is more future-proof. With MM OM1 -> OM2 -> ... -> OM5 it's a pain to keep running new fiber as technology improves. Whereas with SM, you can get 2+ Tbps on today's SM fiber so it's going to be good for a long time. MM may eventually become totally obsolete. And I make my own cables because I'm a dork and have a fusion splicer and all the tools. I've also tried weird stuff like fusing MM to SM to see what happens.
@pareshbalsara46623 жыл бұрын
So excited, that i follow your series meticulously, seriously thinking about the CCNA CERTIFICATION
@АлексейБезбородов-ц9х6 ай бұрын
2:13 to complete the list of reasons - also the reason (the main reason IMO) it's possible to transmit data faster and to a greater distances by using light - is that with copper cable you have parasite capacitance between the wires which doesn't allow to send signals with really high frequencies because at such frequencies the signal basically "drains" between the wires. You simply cannot alternate between ones and zeros that fast
@DnBproductions10002 жыл бұрын
awesome video man. I started working on the GIS side of fiber 5 months ago. This helped me understand more of what our team places in the field!
@legendaryz_ch Жыл бұрын
LC and SC themselves have 2 Versions: LC-PC (also called LC-UPC) which is the blue one with no angle at the end of the fiber and LC-APC which is angled 8 degree. Same for SC. The advantage is, that LC-APC has less reflections which go backwards inside the cable
@vinatron80753 жыл бұрын
I love fiber I’ve had to learn a lot about SAN networks these past few months working with Mainframes and the FICON protocol. Great videos keep up the good work!
@vinatron80753 жыл бұрын
Also I have had some experience terminating fibers as well.
@vinatron80753 жыл бұрын
Yea Aqua is usually multimode the newer faster cables the Orange is the standard multimode cables for slower connections. Typically the Aqua is for 10G+ and the Orange is for slower connections usually. Also Single mode also has a Yellow flavor and a Dark Purple flavor as well maybe it’s a Dark blue it looks almost purple just thought I’d mention that.
@zackthomas57073 жыл бұрын
Like strapping my kids in a car seat......or straight jacket 🤣😂🤣 I know the feeling bud Awesome video as always On a side note: I Passed my CCNA CyberOps a couple weeks ago thanks to you and David and all the good people on here handing out motivation and material like this, so a genuine thanks is in order. For real I probably never would have attempted it if it wasn't for yall. So thank you.
@NetworkChuck3 жыл бұрын
That's awesome! Congrats!
@boneitch3 жыл бұрын
Single mode, the star of the show. I feel validated.