I have been looking for a solution to this scenario for a long time, until I found the solution through this video. THANKS So mush
@MSHRadio-dj5zn Жыл бұрын
just installed a first node in bare metal EVE and was curious how to get it hooked up to the internet. Can't thank you enough for making it super easy for me!
@johnramos40003 жыл бұрын
Excellent Video Tony, I'm trying to setup an IE lab on the go and on a budget and this kinda fits right in on what I'm looking and at the same time trying to setup and testing automation frameworks
@thiagohrm3 жыл бұрын
Hello Tony , excellent video and great explanation. a have a question , how can i access the ASAv mgmt interface from outside ? like ask my computer using something like IDM to connect to the ASAv mgmt on GCP ? is it possible to do it ?
@hectorcardenas66162 жыл бұрын
thank you for showing the command how to get to the interfaces.
@mjk4389110 ай бұрын
Superb and informative!
@jityahoo Жыл бұрын
Wonderful guide.. thank you for your valuable efforts..
@frankiestroud5523 Жыл бұрын
Thanks for the video. I can connect to the cloud directly from devices and access the internet without any issue. I have tried placing a router in front of a topology and performing NAT translation on the router to the range used for the cloud. This does not seem to work for me. Do you have any solution to accommodate this?
@no-blink4045 ай бұрын
Thanks for the video, helped me out, you explained everything very well. :D
@just01guy962 ай бұрын
Thank you very much!
@agraciag2 жыл бұрын
Worked like a charm, thank you!
@wiltshire64932 жыл бұрын
for future viewers, you need to choose CLOUD1 vpc --- cloud1
@erlin71253 ай бұрын
Great video! Thank you!
@js229712 жыл бұрын
Not working at all for me, I am able to follow the exact steps and all verification commands match yours but when i come to verify with the VPC it says host not reachable.
@AlexrjBarros4 ай бұрын
Thank you for the video.
@muhammad.rafi20123 жыл бұрын
thanks for the video, can you please advise ? I am trying to add addtional nic on to my eve-ng vm in gcp and make that eve-ng devices talk to the other VMs in the gcp ? have you done something like this before ?
@trial000000000000001 Жыл бұрын
Awesome. THANK YOU VERY MUCH. Tony, you are my hero. Q: Could you clarify why won't it work when I try to directly connect to Cloud 0, and give the node an IP address from the internal IP range?
@aang_agung Жыл бұрын
Same question
@p.shilpa9682 жыл бұрын
works great.. thanks for the video..it simplifies a lot of things
@RyanBess2 жыл бұрын
while i can connect out, my download speeds are just aweful. Thoughts?
@mugiwaranoluffy18373 жыл бұрын
it worked like a charm. god bless you.
@abhijitrajkumar54023 жыл бұрын
Really appreciate your work !! I am able to install eve-ng in google cloud.. but it seems i can use only VPC ( desktop ) in the lab .Please create a video where we can activate ASA or Palo Alto and use in our lab.
@tonye82053 жыл бұрын
I'm glad to hear you have EVE-NG running. That's great. It's true EVE-NG only comes with VPC by default and you must add the images you intend to lab with. You can use the written guides from EVE-NG documentation to add various images. www.eve-ng.net/index.php/documentation/howtos/
@abhijitrajkumar54023 жыл бұрын
@@tonye8205 thanks 😊
@Black_Swan68761 Жыл бұрын
Thanks Tony, for sharing the video. Indeed you resolve one of the issues in eve-ng. One more favour i need from you. How do I make the configuration persistence in the VM. I tried the link you provided but i get 404 error. Thank you so much for your help.
@loueybencheikh6156 Жыл бұрын
Thanks a lot, Great video it helped a lot !!
@MaGiC9669 Жыл бұрын
After a reboot, I can no longer ping my gateway from within EVE-NG. Any suggestions? I suck with Linux so that's my main problem :)
@张鑫-o7m2 жыл бұрын
Thank you very much sir. I install eve ng in vmware workstation player on my lunix laptop, but the ping to my physical laptop(lunix) to my lab failed; can you help me please? Thank you.
@juancarlosgonzalez45702 жыл бұрын
The net element, in which interface works? , bridge, cloud1..2.., What is the difference between bridge and cloud interfaces?
@kwiatriot61902 жыл бұрын
Bridge is linked to pnet0, cloud interfaces are liked to the other pnet interfaces. Cloud interfaces are used to make links internal to the lab. They explain them well in the cookbook.
@alibboye2975 Жыл бұрын
I have followed all the steps as explained in the video but can't still have internet, i connet mt cloud to a cisco router but cant ping the gateway.
@SumanKundu-z6m Жыл бұрын
I need help to take Firewall (PA or other) GUI access, LAB hosted in GCP
@hmhmh87692 жыл бұрын
Hi Tony, thank for your video. I have a problem with save iptables rules. I try to install iptables-persistent but can not setup in lab.
@kwiatriot61902 жыл бұрын
look into nftables
@gd28606 ай бұрын
Why not just use a router going to cloud0 with a nat config? This allows internal device packets exiting getting natted and still leaving the wire via cloud0. But i suppose this is just as doable.
@kishorekannanp3 жыл бұрын
Hi Tony, Thank You for the detailed video explanation, could you please post the same for GNS3 in Google Cloud
@tonye82053 жыл бұрын
I haven't tried GNS3 in GCP. If I get some other requests I may make a video for it as well.
@arunkolathur17873 жыл бұрын
@@tonye8205 interested please Do a Video for GNS 3 installation in GCP
@featuredengineer40672 жыл бұрын
Please make a video for GNS3 on GCP
@adams82492 жыл бұрын
Hello the github link is not working anymore, can you update please !! Thanks for the video !
@imtiazali16282 жыл бұрын
Hi Is there anyway to setup a cloud with dhcp option. I want to use cloud with dhcp (It will distribute the IPs to connected devices automatically). Thanks
@igorcervo2140 Жыл бұрын
You need to install and configure dhcp server. In the conf file, put subnet and mask configured on cloud1 interface.
@marouaneazza35192 жыл бұрын
Thanks a lot 🙏🙏🙏
@asdfman532 жыл бұрын
what if i have multiple subnets that want to connect to the internet?
@MrDeather20 Жыл бұрын
hello, the github link is not working, where are the commands. thank you
@girishpant_yt Жыл бұрын
The link for the commands is not opening at all.
@AhmedAbdalla-z6t5 ай бұрын
Thanks ,how we can unlock locked lab
@ccna4noobz5473 жыл бұрын
Solid Video! Shalom
@anandm65222 жыл бұрын
Thanks it works 😅
@jgraceut2 жыл бұрын
hello can someone send me the cmd's. the accompanying blog post: link is not working
@basudebbhanja1144 Жыл бұрын
Which one good for run EVENG Take a look at this MSI Alpha 15 AMD Advantage Edition Ryzen 7 Octa Core 5800H - (8 GB/512 GB SSD/Windows 11 Home/8 GB Graphics/AMD Radeon RX 6600M/144 Hz) Alpha 15 AMD Advantage Edition B5EEK-235IN Gaming Laptop Take a look at this MSI Katana GF66 Core i5 12th Gen - (16 GB/512 GB SSD/Windows 11 Home/4 GB Graphics/NVIDIA GeForce RTX 3050 Ti/144 Hz) Katana GF66 12UD-472IN Gaming Laptop on Take a look at this HP Victus Ryzen 7 Octa Core 5800H - (8 GB/512 GB SSD/Windows 11 Home/4 GB Graphics/AMD Radeon RX 5500M) 16-e0550AX Gaming Laptop
@basudebbhanja11443 жыл бұрын
One think it is possible to configure Mikrotik RouterOS inside my EVE-NG which is hosted on my Google Cloud Platform, using Winbox in my local PC. The standard configuration for the locally installed EVE-NG allows me to connect my PC network to the virtualized network, but since my EVE-NG is now on the cloud, is it possible to connect the RouterOS to my PC Winbox for easier configuration?
@Tamilzan_Nandu3 жыл бұрын
Hi Tony/Team, Can you confirm this works on community edition eve-ng, part1 mentioned. as EVE-ng chat support denied it won't work untill we buy professional version. please confirm.
@mickeyjames193 жыл бұрын
I tried it and worked perfectly on Community edition