Connect EVE-NG to the Internet And MORE with Cloud Types

[@kitkat0981]

is this EVE-NG pro? I dont have theses different clouds in my COmmunity edition. Only have Bridge, and cloud 0 to 9

[@brandonunger1689]

I Just upgraded to the EVE-NG Pro version and wow, worth every penny with all the features. Great video describing the different 'network' nodes; and my mind is blown with the 'private' cloud connection; which has my mind spinning with ideas because I'm building a 2nd E5 Xeon ESXI 7 server that will be 'Satellite' in EVE-NG 'cluster'. Goodbye GNS3, ...EVE-NG does it all plus way more.

[@toolate6971]

I have been using EVE-NG Pro for the last couple of years. I was happy to see this video explaining the power of EVE.

[@pontiff2]

Ahhhh such a simple video without the confusion you see in other vids. Great work, glad I found this (as just starting getting into eve-ng) 👍

[@permitipandyandy]

Knox, did you preconfigure a CSR interface with ip address dhcp?

[@kwiatriot6190]

I had to set the interface to dhcp as part of my initial setup

[@permitipandyandy]

@@kwiatriot6190 same here, thanks!

[@dhanush1746]

Hi Knox, Which telnet client your using. Thanks

[@raajseeker]

Which console are you using ?

[@FELIPEROD92]

It's possible with community version?

[@kwiatriot6190]

Did you have some coffee before recording this one? ;) Great stuff as always!

[@vinceresente]

I have watched many of your Cisco Eve-NG sessions and I have also purchased Eve-NG Pro for my own labs. I am struggling with one issue and I cannot even see that you have tried this, or I might not have seen it yet ? The issue that I have is that I have to build a Cisco ISR or CSRv in Eve-NG and map a Cloud Interface I have mapped to my external ISP (Fibre NTU) . I need to test a PPPoE setup and a IPSec Tunnel

[@rishavpathak5288]

Can you share with us the icons links

[@marcjohnson1497]

Great video! (All of your videos are awesome). I use EVE-NG Pro in GCP and I'm able to use the NAT cloud to connect devices to the Internet Ok but if I have, for example, a router connected to the NAT cloud, I can ping 8.8.8.8 no problem but if I connect a PC to that router, it is not able to ping this address. Show ip route indicates the default static route to 172.29.129.254. But I don't understand why the PC connected to the router can't ping out to 8.8.8.8. What am I missing?

[@Freezy443]

You need to configure NAT on the router to translate PC address to public

[@Hicnik1]

hello, in my lab i dont have management clout selection. only bridge in the list. how to fix it?

[@bootcd]

you are using eve-ng pro it is too easy , please try to get the same escenario with comunity version . the normal user has comunity version

[@gjbm1782]

Excellent video! How did you manage to use moba xterm to be default console for eve-ng? Thanks

[@DataKnox]

I use SecureCRT

[@gjbm1782]

@@DataKnox thanks for replying. BTW great channel I'll start following you :)

[@oskarnorman3122]

Hi do you have to have eve-ng pro for internet connection

[@danielrocha823]

Can you do this with Hyper-V?

[@sbapungi1506]

I only have Management and cloud 0 - 9 and bridged. How come ?

[@aydinkarimzadehasl8388]

Hello dear I have a problem with EVE-NG and I could not get any answer to my problem. when I want to add Managment(cloud0) to my scenario,Unfortunatly it does not show this managment cloud and it only show cloud 0 to 9 and bridge So my question is how can I handle ro solve this problem. suppose that I want to config WLC and without this managment cloud I can`t do anything It would so appriciated if you help me.

[@alexribas2010]

Cool, did you try access remotly your EVE-NG (External-->Internal) ?

[@DataKnox]

I do that in our SD-WAN course

[@alexribas2010]

@@DataKnox Cool thank you :)

[@faisalak7]

Is this the Eve Pro version ?

[@josem.defrankjr.8574]

Excellent video...just the other day I was looking for something like this...very good and simple. Thanks.

[@Anavllama]

For a non-trained person, what role does selecting adapter type have on clouds? I want to ensure R1 gets its own WANIP ( a private IP from the DHCP of my main router which also gives out DHCP to the laptop hosting eve-ng). Secondly I want to be able to winbox from my laptop into R1 directly. I tried GNS3 briefly and it was done using an external connevtion and an internal connection and it worked. For the life of me unable to progress on eve-ng. Finally, when I select network I dont have all the options you see, I have bridge (as you state basically an unmanaged switch) and Management cloud0, and then cloud 1 through could 9, but no such options as "private', "internal" or "NAT" ????

[@ccie66162]

Thanks Knox, was having some difficulties when testing the private network across multiple topologies. Ofcourse they were both name CSR by default. Wouldn't have considered that's how it derives macs without the video.

[@it-fre4ki]

How can i drop a vlan tagged packet to the switch on the EVE-NG NIC (Management - Cloud0)?

[@gjbm1782]

do you know how to install an rsyslog server on eve ng?

[@Meddle_is_way_underated]

Hey Knox, what template are you using in SCRT? i.e. -your code coloring

[@DataKnox]

github.com/mathewbray/SecureCRT-Cisco-Highlighting

[@Meddle_is_way_underated]

@@DataKnox Roger that.

[@souviksamanta8938]

This is nice video. But I have a problem to connect my GUI vmanage. I used cloud 0 Mgmt directly connected to vpn 512 eth1 still unable to access the vmanage GUI ir ping. Any solution ? I have tried with same network as my EVE-NG GUI address also selected NAT on vmware workstation. need your help

[@makram926]

man same probem what did you do ?

[@migmorales22]

Hi, i'm hosting my eve-ng on a VM in VMware ESXi, just as you, i put my VMNIC card on promiscous mode too, and from the cli of eve, i can ping wherever i want, but my cloud0 on eve is not working, what could it be? . The VM have a public ip addresses, so i can reach it from anywhere.

[@auroraglamorous2273]

Could you please explain how to have internet access to eve-ng nodes deployed in gcp ?

[@novicetopro2249]

Hi, did you find a solution to this: I'm stuck. I cannot ssh telnet to the nodes

[@techsostip]

i need help how to rename the cloud menu to different name (i have some specials lab)

[@rdingram]

As a PSA to anyone else who might have the same issue: I was unable to get my devices in my topology to ping other devices on my lan via the Cloud0 object that was directly connected. I could see the arp table on the switch filling with neighboring devices but icmp was failing both in and out. Turns out in ESXI, promiscuous mode needs to be set to Accept in the VM Network port group settings. Those packets from my topology's bridge(Cloud0) to my lan were being filtered. Hope that helps someone.

[@DataKnox]

I cover that around 4:25 in this video. kzbin.info/www/bejne/n6DRoaqtpKiierM sorry for any confusion

[@nonickz]

thank god, it really helped me

[@kodzoagbedanu1694]

Thank you so much. I ran into the same issue. I just implemented the change under the promiscuous profike, and it started working.

[@leothalion3983]

What kind of keyboard are you using, sir?

[@DataKnox]

Corsair

[@louiswong5949]

Fast and accurate lesson. Good job.

[@seungtaekoh87]

Thanks for greating video. could you explain the others? cloud0 and cloud 1 etc, I think these are used with esxi vswitch but always confusing. and using this how to connect the real material with eve-ng? I think this is kind of advance feature but it will be very useful !!

[@DataKnox]

Here is my playlist on EVE. I have a a video on connecting to other VMs as well as hardware kzbin.info/aero/PLIlpqyrKHrRPcRWKNSFo9qr2Oz307klT1

[@randyrozo]

Connect my docker server to Nat, it responds to ping 8.8.8.8 but when I open the browser it does not access the pages. What could be the problem ? I have eve-pro on GCP

[@DataKnox]

Share your startup config on the container

[@randyrozo]

@@DataKnox this is the config ip addr add 172.29.129.10/24 dev eth0 || true ip route add default via 172.29.129.254 || true cat > /etc/resovl.conf

[@randyrozo]

Already I see what the problem is hehehe, I put wrong resolv.conf

[@1adam129]

I was just searching for something like this earlier today thank you so much!!

[@kaliblermartinez5756]

al principio no entendí, pero al final tampoco, pero me sirvió, ya que no sabía cómo hacer que un nodo router tuviera internet y es que no había creado la conexión de red, estoy aprendiendo a mi manera, gracias totales

[@chrisozmen9578]

Hi Knox! I am attempting to connect my VMs inside my bare-metal eve-ng server to the internet. Interestingly, there's only bridge, internal, private and NAT options with the Cloud0, Cloud 1 options missing. Has anyone managed to connect EVE VMs to the internet via bare-metal?

[@DataKnox]

NAT would still get them out to the Internet but you may want to reach out to EVE support

[@danmcgirr4210]

You sir are great! Thanks for all this excellent information!

[@augustbernard3396]

Superb! Thank you!

[@arnolddimailig6547]

Great video!

[@faisalak7]

This is perfect very geeky thanks again :)

[@mikerfields]

All I'm thinking of is how good connecting Eve-NG to Gns3 to VIRL 😂 would work. I'm pretty sure it'd be a little chaotic.

[@DataKnox]

Just make sure MAC addresses are unique

[@rufatjabrayilov1616]

thanks for info

[@leejasper766]

Thank you

[@DG-if3gs]

legend!!!

[@jonathanlynn6397]

nice!!

[@ericmaletras8199]

version too old. It doesn't work like that anymore