Thanks for watching guys! Super keen to know if anyone has experience or advice drag racing Z👍 L series timing chain holder tool: kyushaspeed.com.au/shop/l-series-timing-chain-tool/ My instagram: instagram.com/built_on_purpose/
@keithmckibben8774 Жыл бұрын
Aaron, great to hear you have plans for more engine building. I cannot help with drag racing, but I will say that I got much satisfaction out of blueprinting my engine starting about a year ago after I had suspicions that all was not right with it. Turns out the rocker wipe pattern had not been set properly and I wasted a cam and rockers. Gave me the excuse to pull everything apart and put it back together myself. I did rings and bearings, honed the cylinder myself, ported and polished the head with a dremel tool, skimmed the pistons with a lathe, got the leaking oil pan and front cover fixed, plus seals in the diff and trans. I invested in the tools to measure the bores, pistons and crank, gapped the rings, new higher lift cam with different valve guide seals for clearance (made an installation tool). Been back together and driving regularly, no oil leaks and runs stronger than ever. I thought I might need a machine shop to help with removing and replacing the pistons on the rods and machining the pistons, but I did everything in the garage. Made a fixture for the lathe and for pressing the rods on the pistons. Anyway, with all the experience and knowledge you have gained over the years I think you will really enjoy making each part work as well as it can. For me, the best part was saying "I have always wanted to try..." and then just doing it.
@kyushaspeed Жыл бұрын
Thanks Keith. I plan to do as much as I can myself agin, probably a bit more than I did when I originally built the engine together in 2009. The toleranced machining I’ll leave to the experts. I’m a lot wiser now and know my limits haha
@er34gtt2000jp Жыл бұрын
Lots of L powered S30s drag race in Japan. I have a 70' 240Z set up for 1/4 mile but it's Ford 302 swapped with an 8.8 LSD rear-end out back on ladder bars. Ran 11.54 @ 124mph NA back in 2010. Good times man!
@kyushaspeed Жыл бұрын
Nice! do you use an auto trans?
@davejones4295 Жыл бұрын
Good luck on going forward and will be watching with interest. It's only money. 👌
@kyushaspeed Жыл бұрын
Cheers mate!
@robwhite240z Жыл бұрын
I'm 100% onboard . Any help with porting and drag racing, let me know. Onwards and upwards.
@kyushaspeed Жыл бұрын
Cheers mate, appreciate the support 👍
@BOGCUSTOMSTIMEATTACK Жыл бұрын
Hey mate please get yourself a adjustable timing gear to dial in the cam. Large gains to be had Stewart Wilkins has ones.
@kyushaspeed Жыл бұрын
Cheers mate. An adjustable gear is definitely on the list for the build.
@georgem8200 Жыл бұрын
David Vizard books.
@kyushaspeed Жыл бұрын
Definitely. I've got a few of his books in storage....somewhere 🤔
@RindosRides Жыл бұрын
Your making some really good power from that engine as is. If you want more power though, L series is not the way sadly.
@kyushaspeed Жыл бұрын
I think I have to disagree. There are a number of examples making much more power than my own motor and well set up with ETs in the low 10s. I think a number of them competed in the ‘Pro NA’ category and Japan’s drag fest this year at Sendai highlands.
@RindosRides Жыл бұрын
@@kyushaspeed just checked those out, pretty quick stuff. Gotta remember those are the absolute pinnacle of what the L will do though, race gas only, rebuild after a few passes. The red one was smoking real bad on that last pass.
@zao1970 Жыл бұрын
hope the motor is ok
@kyushaspeed Жыл бұрын
Cheers mate. There are a couple if things to fix - might as well make a few upgrades while it is apart 😏
@SeanOBryanZZ Жыл бұрын
hey i just started working at a drag strip(1/4) I'm sorry a disability is hindering you enjoyment. possible you can go to an event at a track that doesn't require a license. schools and one off events. im going to try to get one of my Z down the track so maybe we can have a little contest on who is the fastest.
@davidwilkes1984 Жыл бұрын
Does this mean we are bring Denaus back to jambo.
@kyushaspeed Жыл бұрын
I suppose it does! Maybe Jambo 2025 for me though, I'm not in a rush 😂