First "correct" speedo and gauge video. Still running some old ecu tune from my last B5. Now I have 30% smaller nozzles and stock AKN pump. Looks like my big S362SXE is still too small. Approx 340hp with this tune.
Пікірлер: 48
@macedonianlad10 ай бұрын
that sounds INCREDIBLE
@bigdiffas10 ай бұрын
Thanks. It is actually quite mellow noise since the exhaust goes thru two turbo stages.
@tbrick49709 ай бұрын
thats a lot of turbo boost for a small diesel v6 with a stock ecu, really impressive 👍
@bigdiffas8 ай бұрын
Yeah max i have pushed is 4.5bar
@onsomebits74862 жыл бұрын
3bar?! Man that’s crazy lol can’t wait to see it with more fuel 🤟
@bigdiffas2 жыл бұрын
yeah 3.3bar max :P
@raimondasnezinau65102 жыл бұрын
13-14 afr for diesel its not leen its smokey
@bigdiffas2 жыл бұрын
@@raimondasnezinau6510 yes but thats not in this case
@heavyweight64402 жыл бұрын
Holy Sh*t, diffas! This is one crazy machine. The RPM range impresses me. Does the engine easily take the 6,000 rpm? The sound is awesome - if you didnt know it, you would think its a 2.7 V6 or so ^^
@bigdiffas2 жыл бұрын
It pulls harder the higher the rpm is. I think its the cams that i have. My old ecu starts cutting off fuel after 5500rpm so i'm changing gear (or at least trying) around 5500-5600.
@adamkelly14922 жыл бұрын
@@bigdiffas damn.... 😳
@jksoundsystem82302 жыл бұрын
Bien joué mec👍💪
@_riQ_2 жыл бұрын
Hävyttömän komeeta!
@bigdiffas2 жыл бұрын
Toivoa herättävä kyl. Tälleen ku tekijän ottaa huomioon 😂
@STEFA742 жыл бұрын
Hyvin rokkaa 💪, ja kohta vielä paremmin
@bigdiffas2 жыл бұрын
Tekijän ku ottaa huomioon, niin yllättävänki hyvin :D
@edissss1112 жыл бұрын
Hey. Stock pump 106b works good as i can see😃👌 do you plan to use 106e instead?
@bigdiffas2 жыл бұрын
Nope. Plan is to install my old pump once it is delivered to the pump shop for checking. So far they seem to work nicely
@AKo822 жыл бұрын
Noilla lambda-arvoilla ei varmaan ihan mahdottomia savuja edes päästä👍 Eli ainakin ahtopuoli pukkaa sopivasti ilmaa.
@bigdiffas2 жыл бұрын
Joo, no maksimisyöttö 5000rpm ja lambda 1.40. Periaattees aika hyvä :D Ku normaalisti ku viritetään niin 1.15-1.20
@riadxx35592 жыл бұрын
How much boost can hold a 2.5 tdi turbo stock because with 1.6 bar boost destroys my turbo
@bigdiffas2 жыл бұрын
If the tune and the turbo are good. 1.8bar max for middle revs and 1.6 on max revs past 4000
@riadxx35592 жыл бұрын
@@bigdiffas thanks bro im going to install that turbo on my 1.9 pd just with 1.4 bar i think it is enough
@bigdiffas2 жыл бұрын
@@riadxx3559 It is quite old tech turbo but its been used several 1.9tdi setups in past years so it will be fine. Its good for 200hp range
@riadxx35592 жыл бұрын
@@bigdiffas how much hp can i bring with this turbo without having any damage on engine or somethingels
@bigdiffas2 жыл бұрын
@@riadxx3559 about engine i dont know how reliable it is, nornally 1.9 is strong and takes 200hp without any problem. 200hp is fine for turbo all day.
@RexcorCoIE2 жыл бұрын
Да ну нах, так не бывает!
@Haya3usaGsxr2 жыл бұрын
Why the s362 should be too small? You ve 340hp and this turbo can give a lot of more ..
@bigdiffas2 жыл бұрын
As you can see it makes almost all the boost after spool up (right gauge) and my hp turbos are not boosting. Idea is to have lower boost on s362 and multiply it with the hp turbos.
@jpi74438 ай бұрын
at 0:45 you almost turned your car into a train xD i think that wasnt good for the engine =D
@bigdiffas8 ай бұрын
there is just a jump on the road and the tires rub a bit
@marx9212 жыл бұрын
HI! which flywheel do you use? i think, standart 2 mass flywheel can't work with this torque😆
@bigdiffas2 жыл бұрын
Stock flywheel like i used to have my old setup. Im planning to go solid one later
@marx9212 жыл бұрын
@@bigdiffas that's interesting. my setup with 500nm don't work correctly on stock flywheel, it starts to vibrate strongly on 4,5,6 gears, in peak of torque. want to buy single mass flywheel from Valeo and adapt to the clutch kit from 3.0tdi audi. this clutch is pretty good for 600+nm
@bigdiffas2 жыл бұрын
@@marx921 well that depends on rpm you have the max torque. I have high reving engine so the peak torque comes pretty high rpm.
@marx9212 жыл бұрын
@@bigdiffas yes, looks like truth, i have gtb1756 turbo, and peak of torque is from 2000 to 3500 rpm. in this pretty low rews flywheel starts vibrate.
@VoltiVolti22 жыл бұрын
Hi, you have turbo gtb2260vzk on 2.5 tdi yes? Maybe you sell? XD
@bigdiffas2 жыл бұрын
I have it on my b6 but it will stay on the car :) You can find lots of those on ebay
@onsomebits7486 Жыл бұрын
So-tdi fwd single is so much quicker
@bigdiffas Жыл бұрын
So how much ? 0-100? 1/4mile or 1/8mile?
@teaholiq2 жыл бұрын
that small green screen is an egt sensor?
@bigdiffas2 жыл бұрын
yes, but the wire is damaged so it reads whatever :D
@RexcorCoIE2 жыл бұрын
What is your maximum EGT before turbo?
@bigdiffas2 жыл бұрын
egt probe wire took a hit and its not working currently. "should" be quite good temps since it is so lean
@-DeaR-6 ай бұрын
What Is this ? 0:46
@bigdiffas6 ай бұрын
What do you mean? the rubbing sound? There is pump on the road so wheels rubs a bit