New 3DS Top Screen Replacement Guide | From Start to Finish

[@Mario-sx2lm]

Hello Sr. I followed your instructions and it worked out perfectly. At first it was really intimidating, more than anything I've repaired before, but your instructions were clear, your video showed every little detail and the troubleshooting at the end was just what I needed. I hope you are doing great and thank you very much for the video!

[@neotil1]

Awesome! Reading comments like these really makes the time I put into making videos worth it.

[@chrislaustin]

My son broke his top screen almost a year ago, and I've been putting off fixing it ever since. When I looked up repairing it back then, your video was the only good one I found, and a year later, it was still the only one. I've done several shell swaps for the PSP and DS units, and while I may have ben able to figure this one out, your video was one of the best I've ever used. If I ever had to do this again, I would be much better prepared now and pretty confident in doing it safer and ever faster. Thanks for the video, as it helped tremendously.

[@AlexanderEmashev]

You have my thanks! I've just fixed two new 3DS's thanks to your tutorial. You've got a real talent to explain. I appreciate the fact that you go in particular depth regarding the place that can be tricky to deal with.

[@neotil1]

Thanks! Glad I could help :)

[@captainuber3542]

I've repaired/refurbished a lot of New 3ds xls. Glad to see that the new 3ds top housing just clicks into place. The amount of times on the xl that I had a shell not want to close properly is unreal. It's mostly because I use after market shells. The cheap plastic clips always bend. Great work btw I would usually pull out all the ribbon cables. Instead of just removing the screen ribbon cable by itself. I've been making it so much harder on myself than it needed to be.

[@neotil1]

Oh, the n3DSXL is easy to do as well. You have to slide it on/off but people rarely know this haha Hope this helps next time you take one apart ;)

[@ロケマルコ]

I never comment on videos but I wanted to take the time to thank you. You made the process so seamless, especially with the seperation of the ribbon cables from the top and bottom part. I had an ease following this tutorial. Thank you so much!

[@neotil1]

That makes me super happy! My video quality and voiceover certainly isn't the best, but I'm glad it was still helpful!!

[@Tamhvm]

I just wanted to tell you, your tutorial is amazing! I didn't have to replace my top screen, but rather the speaker and sliders harness. Your instructions were quite easy to follow, and I was able to do it without problems!

[@neotil1]

Glad it helped!

[@sundance9302]

if you don't have another KZbin channel where you just repair random things you need to make one this is one of the best repair videos I've seen

[@vurquidi]

Thank you so much for this guide. I tried looking for help with removing the hinge as I ended up horribly damaging the plastic shell of my brother's 3DS and I wasn't sure how people got their hinges out so easily, as every video I checked, most either cut out the part where they got it out, or they somehow got it out with ease and no tips. I will be ordering more replacement parts soon to repair his and my new second New 3DS XLs and I will definitely be watching your guide again when the time comes!

[@neotil1]

Good luck, I'm sure you'll be able to fix it on your second try!

[@IrrelevantToCommentLmfao]

How was it?

[@starbursts]

Everything went well for me. It’s nice to see a detailed tutorial.

[@Puribu]

I was only replacing a circle pad, but I love how clear your instructions are, and the detail of when certain screws are all the same size. Thank you!

[@codybegg5213]

I repair electronics for a living. But this one nearly drove me insane. Thanks for the vid bro

[@Violet_Jay]

I never repair anything in my life so when i say this was amazing i truly mean it. I followed everything you said and managed to not only fix my screen but even replace the screen lens and clean it out with an air spray. Tysm this was very educational!

[@miklovale2270]

Did this with 2 new 3ds back to back, crazy, I can't believe I did this lol, now I just gotta sleep, long story short, great tutorial, just need the right tools(any 3ds kit. Preferably the ones that give you a ton of variety) a lot of patience, and delicacy. God bless yall, hey man great video 🎉

[@pandapearx3]

Thank you for your great step by step guide as well as the explanation for which cable is linked to which function. I kinda destroyed a short strip of the blue cable for the touchscreen because I didn't see the hinge and it frayed. So I need to replace it now, but it's still cheaper than buying a used New 3DS.

[@L8-Bit]

Thank goodness this exists, I'll be attempting this next week as the N3DS I ordered from eBay had a yellowing top screen. I'll update the comment once I've attempted, wish me luck!! :D (ps I've watched this video like 6 times already just to prepare myself with a greater understanding of the internals)

[@neotil1]

Good luck :)

[@L8-Bit]

@@neotil1 It worked!! Thank you SO much for your guide, my only fault was that I broke off the little notch that locks onto the 3D slider, meaning I cant access 3D anymore, but considering I never use the 3D functionality, I'd chalk it up as a win XD Thanks again for this incredible guide!! If I ever get round to repairing the slider, this video will come in handy again!! :D

[@nathankrager]

At 29:23 I opened the connector thinking it was a latch now when I try to turn on the 3ds it makes a popping sound and doesn't light up anywhere on screen. I was wondering if I needed to buy a new motherboard or is it a different problem? Thanks in advance.

[@neotil1]

That's the bottom screen backlight connector. Unfortunately, if it's bent it will prevent your 3DS from booting. Are you able to bend it back into place? (Applying pressure onto the cable with something like a paper towel wedged between it and the housing might help as well). If you broke the piece off, your motherboard unfortunately needs to be fixed. Replacing the connector requires soldering, so you'll need to take it to a repair shop (or replace the board entirely). I hope you can bend it back into place! Good luck

[@nathankrager]

@@neotil1I think I fixed it as the screen is flickering when I start it up however the top screen is unresponsive

[@neotil1]

Are you sure the top screen is connected properly? Make sure the speaker ribbon cable is inserted into the connector on the motherboard properly and also check if the top screen is also connected to the speaker ribbon cable in the top half of the 3DS (two small ribbon cables)

[@13lobos]

I made the same mistake but was able to bend it back somewhat. I then cut a small piece of 0.5mm thermal pad and used it to secure the connector and ribbon cable in place.

[@darkleader2269]

Thank you so much. I have had this video bookmarked since 2020 and i finally decided to replace my screen, and your video was such a great guide. Thank you so so so very much for helping me restore some of my childhood

[@neotil1]

I'm very happy my guide was helpful to you! Have fun playing :D

[@KingLumague]

I know this video is old, but it's still relevant. It's great and I only have one criticism. When putting the lens back on the screen, it is much easier to put the screen into the top housing first, then put the lens on so that it's perfectly in place. Both pieces can only go in one way, and this ensures that the lens is put on perfectly without having to readjust it to get it into place.

[@neotil1]

You're 100% right. I usually do it that way as well. Idon't remember exactly but I think that since I reused the old adhesive, it was very easy to see where the lens is supposed to go. And with that in mind, sealing the display from fingerprints and dust is my #1 priority :)

[@nyrisj]

I followed this today and got my screen replaced with zero issues. The only thing I will say is to remind people to be careful not to lose their buttons.

[@Hector-444]

Thank you so much for making this video. I was able to replace a TN panel with a fresh IPS screen on my new 3DS, thanks a bunch.

[@neotil1]

Have fun with it!

[@Hasaki_YT]

Ik this is an old comment but im curious-how were you able to find an IPS panel? Did you take it from another 3DS or bought it alone? I havent been able to find either 😭

[@thunderstar254]

Is there anything extra software wise you have to do? Or does it cleanly swap and run like a proper IPS? I heard tn models are coded for tn screens

[@knightofsouls]

Thanks for the video, also that is the most satisfying screwdriver I have ever heard.

[@larsu-gx579]

I used this guide to swap an IPS screen and new digitizer into a beat up 3DS I got dirt cheap from Japan, I just have to say thank you so much, I really couldn't have done it without you. If you ever need a kidney transplant or something let me know, I will be there for you

[@daviddickson1415]

Where’d you get your IPS screen from if you don’t mind me asking? I’m in a similar boat and probably need to replace mine soon.

[@larsu-gx579]

@@daviddickson1415 Just found one on ebay, 10~11 months ago. Guy selling them said it was one of the last few he had laying around so I snatched it up on impulse.

[@thunderstar254]

Does an IPS cleanly swap with a tn top panel? I heard it can look off with low brightness and you have to do some additional coding

[@TokedAllDay]

Dude I just want to say thanks for this video. Getting prepared to do a shell swap and this in-depth video sure does help a lot. Thanks mate!

[@anzurro]

Here in 2024, followed your guide. Got it working first try. Thanks man

[@HudsonU]

Absolute legend. Was a bit worried about the hinge (its different than a n3dsxl), and there arent many guides out there for the regular n3ds. Thanks for the help!

[@neotil1]

Glad it helped!

[@toaf3402]

Thank you so much for this dude, my 3DS works perfect now, I’d never done anything like this before but had no issues whatsoever. Such a detailed guide, again, thank you so much.

[@neotil1]

I'm so glad I was able to help :)

[@LunacyAnoba]

I just wanted to say thank you so much. I recently purchased a New 3DS and the hinge on it is completely gone - it’s like a floppy mess. I followed your tear down and was able to remove the hinge and slide the ribbon cables through successfully. I can officially say it’s in halves at the moment while I wait for a replacement hinge to arrive here in a few weeks - but I cross my fingers to put everything back the way it goes here soon. You gave me the confidence to rip open my console and take control of its problem - and I can say I am so very happy and officially found a new hobby! Console repair!

[@neotil1]

Awesome, I'm super happy to help. Good luck and happy fixing!

[@GG-zv6gi]

I don’t trust myself enough imma find someone who can do it 😭

[@SharpShadows]

As long as you take your time, it will work out. Have confidence my friend. We all start somewhere to learn these things.

[@ShadowStalkerHD]

3 years later and still the best tutorial. Thanks for the awesome video and tips. Made the process so much smoother on the new 3ds I got from Japan. Images did not show how bad the yellowing was and scuffs on the lens so I decided to swap it out.

[@neotil1]

aww thank you :)

[@alyssa9572]

Great guide, managed to replace the screen without any issues following this video.

[@returnofmerenguespersempre]

12:46 is viable to heat up the plastic a bit with a hair dryer to soften the adhesive before removing the screen? Dont want to break the plastic :/

[@Bimmerboybobby]

at 31:35, my power cable for the power board doesn't seat properly. The ribbon cable goes fully in on the left side, but not the right side. My ds doesn't even power on. No led light or anything. Any clues to why the ribbon cable may be not seating properly?

[@neotil1]

Sorry for responding late. If you have bent pins in the connector, the cable won't fit in all the way. It's very difficult to bend the pins back into shape, even with a microscope. Unfortunately a new motherboard might be the best solution for you, unless you know someone that will solder a new connector on for you

[@mrwyyeet]

Amazing tutorial and very clear instructions! I appreciate it when you show what you're doing twice as well! I personally just watch from about 20:00 to 25:00, but I imagine the rest of the video is as good as it 👍

[@neotil1]

Glad you liked it! I really appreciate your comment

[@DrewMike023]

I need to replace the hinge my 3ds. I’m assuming I can replace the hinge once I follow this guide up until 9:57 in your video, right?

[@geminirebirth]

Very inspiring, might buy a bunch of broken New 3DS LL from Japan and fix them myself. They are like dirty cheap and it's a good way to preserve such a nice piece of hardware.

[@neotil1]

Thanks to 3ds.hacks.guide that region lock won't be an issue either ;)

[@Ferrago]

Thank you so much. I spent few hours to repair it, but now it works perfectly ! Your steps are really clear !

[@neotil1]

I'm happy I was able to help! :)

[@SUSJUG]

I had a question. I was able to get a spare display lens for my New 3DS. The old one has scratches on it, but works fine otherwise. If I'm only replacing the display lens on the top screen, would I still have to disassemble everything?

[@neotil1]

No, just heat the screen lens with a hairdryer until it's warm to the touch, then wedge something like a razor blade between the lens and the housing and start to pry. Your old lens should unstick and you can just stick your new one in place (reusing the old adhesive).

[@richavocado9390]

Where did u get the screen replacement

[@johnsabilla5897]

Thanks, what a helpful video! I manage to replace my top screen using this video as a guide :)

[@LyraPyxisVT]

thank you, you helped me figure out why my touch screen wasnt working, the lcd ribbion cable broke, well one of them, now i know what i need to replace and what i dont need to replace

[@0YoUrOpHeLiAc0]

Hey there, I've followed your guide and everything worked fine until I somehow must've ripped one cable. It's the one you pull out at 4:40. Could you tell me what it is for? I've not noticed anything yet while using the 3ds, touchscreen works fine too. 🤔

[@neotil1]

I think it's for the NFC reader. If you have amiibos, they won't read

[@farcloud6]

This video helped me out so much!!!! i fixed my 3ds that's been broken since 2017

[@kizm8082]

i love your videos, they are so informative and super easy to follow...you should make some more videos like these, given your situation allows. i know i would watch them!!

[@detectiveblutomindpretzel6292]

Just finished! Thank you for the help! sadly the home button won't work, but worth it for a new screen.

[@neotil1]

If you managed to replaced the screen, I'm sure you'll be able to fix the home button too! But yeah, it's not too much of an issue so maybe enjoy playing for a while first haha If you need help lmk

[@detectiveblutomindpretzel6292]

@@neotil1 Yeah right after I commented that I double checked and sure enough the home button ribbon cable was loose so I put it back in and it works great now!

[@neotil1]

Awesome :D

[@artistfora9864]

So the latch at 4:00 came off how do I reattach it or is that not possible and whenever I try to power it on it makes a pop. When I put it all together it powers on and works but if I plug and play it just shuts off and I have it on for a minute and it shuts off. Please help

[@hawkfeather6802]

7:22 after taking apart and putting my 3ds back together twice,I just realized i plugged in the top screen ribbon cable in upside down 😅

[@aallusion]

This happened to me today. I’ve had a 3DS for around 7 years, I never have broken the screen. But today it happened… I have this really old 3DS case and it’s been on my 3ds for a while (basically since i’ve first gotten it) and today I was trying to take it off from the top part, and the screen broke. It’s not fully broken, It’s still playable. Kind of… Basically like a small area of the screen is not visible. I really regret trying to take off the case.. I just hope i’m able to fix it eventually.

[@FuelFire]

How do I open the top screen shell if there are no screws underneath the covers? (I have a 3DS XL)

[@romajikaiser8450]

I bought a 3ds from a pawn shop months ago in hopes of refurbishing it at some point and i was hoping you could help me figure out where to get some of the necessary parts for it. 1. I need new screen lens for the top screen due to it being scratched by the bottom screen, I've looked on ebay and some of the lenses look like they're for the Xl so I'm skeptical on where to find some 2. the entire system doesn't have its matte paint anymore and is just smooth, if you could help me find a paint that's similar to the one on the system I would appreciate that as well 3. I may need a new bottom screen since some parts look washed out than a majority of the screen so if you know where to look please let me know i'm not sure if you can answer all of these but if you can answer just one and leave a link it'd mean a lot.

[@neotil1]

I'm assuming you're talking about the new 3DS (as the o3DS is supposed to be glossy/smooth)... 1. something like this should work: a.aliexpress.com/_BTB7D8 2. just get any acrylic paint in a color of your liking as well as some 2k matte clear coat. it is very important you clear coat the paint! if you don't, the paint will scratch/wear off very quickly. 2k clear is automotive grade and will hold up a long time. make sure to disassemble the console completely and paint the housing pieces separately. (I've never painted a housing before, so I don't know if the results will be good) 3. something like this should work: a.aliexpress.com/_BOMX86

[@romajikaiser8450]

@@neotil1 thank you so much! This is gonna make refurbishing this system a whole lot easier : )

[@Diamonddeath]

16:23 Did you transfer the broken screen to the new one?

[@neotil1]

What do you mean?

[@OGEdgyUsername]

I messed up, I accidentally touched the top screen with my finger, and there's a spot I can't remove it. Help?

[@Noah-ty6of]

can u tell me for bwhat the cable "21P4Y15L" in 27:15min is ? (bc I broke it lol)

[@m1tchy1]

To replace only the camera would it be necessary to split the two halfs?

[@neotil1]

Yes, unfortunately

[@ÆRRE._.fr33man]

IMPORTANT QUESTION: If i dont repair the screen (mine is not that badly damaged) is it possible that the console damages itself even more? Please i need an answer!

[@russell9995]

I'm sure that only the screen will get damaged more. but if you continue to not repair it. the console itself should be okay.

[@ÆRRE._.fr33man]

@@russell9995 thank you for your answer. So if I dont repair the screen it will just become even more damaged at the point that I wont see what it displays anymore? Or will it stay like its current state even if I dont repair it?

[@russell9995]

@@ÆRRE._.fr33man yes, but only over a long period of time. shouldn't worry too much about it

[@ÆRRE._.fr33man]

@@russell9995 thanks a lot

[@keithfern1893]

Hi! Just wanted to thank you for this video. Have yet to start on my own disassembly but this seems extremely informative. Based on your (or anyone watching this in 2024)'s experience, is there any point prior to complete disassembly where you can test if any of the new panels are working?

[@neotil1]

Thanks for the kind words! You can take the motherboard and connect the bottom LCD to it, top LCD to the speaker ribbon and both remaining cables to the motherboard as well. Do note that the screen cable needs to be folded. That way you can test things out, just make sure you don't short anything out or damage the fragile cables. Also, without a circle pad connected the cursor will jump around but that's normal

[@LeafyBreezes]

do you have a guide for the bottom screen?

[@BEkov-kd8cf]

I have an issue, when I fully close the 3ds it refuses to turn on, if its not screwed in fully but the bottom is only half screwed on it'll turn on. Any pressure makes it turn off then it has to be disasembled and the 3 ribbon cables on the back need to be taken off and put in again.

[@BEkov-kd8cf]

I can get it to start but if its pressed on where the DS cart slot is located it shuts off and must be reseated.

[@neotil1]

@@BEkov-kd8cf It sounds like something isn't connected properly. It could be that your connectors are just worn out, I've had that with a couple consoles. To fix that, you need to solder a new connector in place which isn't doable if you don't have good equipment. Still, to be sure it's not something else: disconnect all the "unnecessary" parts. The only things you want to have connected are the speaker/backlight cable, the top screen cable, the bottom backlight and screen cable, the power board and in case you have an old 3DS, make sure the WiFi chip is plugged in. (Make sure camera, touch, microphone, SD card reader, analog stick, C-Stick if you have one, game card reader if you have one, are disconnected.) The 3DS should boot up just fine. See if your issue persists. Then you probably need a new motherboard (read: a new 3DS). If this solved your issue, one of the separate parts are defective. Reconnect them one after each other (disconnecting the battery in between) and see which part is the culprit. Wish you the best of luck!

[@thisislukas8951]

Hello! I really like your tutorial, but i have an issue. It does the "popping" sound, and down screen flashes and upper not, but i connected the wires just how you showed me. Could there be a problem with how i went with it through the barrel? Thanks!

[@neotil1]

Sounds like your top screen and/or speaker ribbon cable is either not connected properly or is damaged. Try reconnecting both parts. If that doesn't work, you may have broken one of the cables during reassembly and need to purchase a replacement :/

[@thisislukas8951]

@@neotil1 First of all, thanks for the reply! Youre an amazing guy. I recconected them, but nothing happened. Is there a possibility, that it cant turn on because maybe i did a bad job with cable going through the barrel? I think right now all i can do is to repeat that job. I bought screen from ebay and reviews said that its great. Really hope that wasnt a scam.

[@neotil1]

I've never had a bad screen and I've bought over 100 replacement so I doubt your screen was bad... Thing is, these cables are extremely fragile and it's very common for novice technicians to rip cables during installation (tiny micro-tears). So the only tip I can give you is to disassemble the 3DS completely and inspect every single cable and connector thoroughly. If you can't find any defects, plug everything in (but don't install it into the housing yet) and perform a "bench test". Just see if the thing powers on while you have good access to all the cables/connectors. If it still doesn't work, you might need a new screen, speaker ribbon or worst case, a new motherboard.

[@Darktoast20]

Hey what size screwdriver do you need to remove the screws underneath the back plate the five and then the two above them

[@miragesnworlds]

Thanks a lot! I was able to replace my screen but I think I blew a fuse bc it only plays when plugged in. Do you know where the fuses are in this specific model?

[@neotil1]

Did it work beforehand? Demo units only work when plugged in, but I haven't heard fuses causing the issue you described

[@miragesnworlds]

@@neotil1 Yes, it used to work properly before. This only started happening after the replacement, so it’s definitely something I did

[@CircleCityExplorer]

I only need to replace the cameras I’m going to try and use this tutorial but not have to go as far as the top screen so any tips would be helpful

[@CaptMuricaa]

I repaired a few ds lites before but never a 3ds & boy this has alot more ribbon cables with more steps, excited but nervous if i break anything during the process of the repair. Thank you for this video it'll come in handy.

[@neotil1]

good luck :)

[@russell9995]

I traded my new 3ds xl for the new 3ds, because I like how the small one feels. the XL hurts my hands when I use it. but the one I bought has some lines on it. so I would mind as well watch this and get a feel for replacing the screen. you will be a great help (I haven't watched the video yet lol)

[@RokuNekoRoku_]

I followed everything but now the 3D is on and can’t be adjusted by the slider; I’ve already gone and checked to see if the slider piece was aligned properly and still nothing. Would greatly appreciate for some help

[@Touhmonglor]

I can’t take out the hinge….the screws on the top screen aren’t there on mine either.

[@ALv88PIK4CHU]

Hello, help please, Does the 3D part of the screen still work with a new generic 3D screen?

[@neotil1]

Yes, of course

[@ALv88PIK4CHU]

@@neotil1 thank you!!subbed:)

[@-KingGanon]

Question could you do a video for the shoulder buttons so I can know how to replace them or fix them

[@adultmoshifan87]

I’m really worried, you saying I have to disassemble BOTH halves of the system to replace the top screen? My launch day system started randomly crashing as a result of an accidental drop, my replacement system just arrived, it works but the top screen is a bit discolored!

[@Gingist]

What was the antenna eith the blue cable for? Is that the Wifi antenna, or is it for bluetooth or IR? Thanks for your help, its extremely appreciated!!

[@Winnie-blues]

I just got a new 3ds today and i cant tell if my screen is a bit yellow or its just that its a tn panel that im not used to and the new 3ds xl and 2ds xl i have are both ips

[@polzinaj]

Great video! I liked how, near the end, you mentioned some troubleshooting tips if screens don't come on after power. If you have some time, maybe you could weigh in on an issue I'm seeing with bootup? - I press the power button, it stays blue. - Neither screen displays anything, yet **I hear the main menu sounds** in the background. - I am able to manipulate the touch screen just fine. Does this sound like an issue with the camera? Or something entirely different?

[@neotil1]

New 3DS (not XL)? It could be the camera, so just leave it unplugged. Did the screens work before the repair? Are you sure you inserted the top display flex the right way around?

[@polzinaj]

@@neotil1 Thanks for the response! It was probably the camera. I replaced it and the top screen at the same time and all was working again. I wish there were more repair vids for the N3DS out there. It seems to be the white whale of 3DS family consoles.

[@Diamonddeath]

Does Nintendo use a third party brand for their upper screens? Which brand is the same or closest for a replacement for a New 3DS XL? Are the other brands of the same quality?

[@neotil1]

afaik all replacement displays are original screens pulled from consoles or they're factory surplus. They look exactly as good as the original LCDs.

[@nicolastessonneau8977]

Hello, Thank a lot for the video, it's verry well explained and one of the few talking about the not XL. I have a question for you. When I power On my New 3DS (not XL) the blue light goes on for about 4 sec and then go off and there is no activity on any of the two screens. When the light goes Off I can hear a very very weak sound like a speaker shuting down (but nothing as loud as the "pop" sound I have heard on othere 3DS repair video). I disconnected and reseated every ribbon but no change. Any Idea ?

[@neotil1]

Unfortunately that could really be anything. Just for reference, the n3DS and n3DSXL have very similar electronics, so reading up on stuff about the XL is still very helpful. Just assembly/disassembly is very different, which is why I made my video :D If you can, I'd recommend getting a second console that is known to be working. It doesn't have to be perfect, maybe you can find one that works with a cracked screen, bad touch, bad buttons, etc. But that way you can swap parts back and forth.... I'd say it's most likely to be the speaker ribbon, then top LCD, then bottom LCD. No guarantees though :)

[@Sippithan]

The SD Card area screws are completely rusted on the new 3ds I got... Anyone know if I can still get the back off without removing the sd card area? could I get to the ribbon cable carefully as I take off the back cover?

[@giancarlo620]

Where can I get the screen? I look it up but don’t really know where to reliably get one

[@adamsteele7378]

Great video, thanks. used this to help repair the hinge on mine. Saved me a great deal of hassle 👍🏻

[@anthonytavarez7758]

can I use a heat gun to replace the screen lens without opening the 3ds or will that damage the screen

[@SpectrumByte]

I have a crack in the middle where the two screens are connected and it is almost split in two separate parts also it doesn't turn on as you could guess because I really fucked it up.

[@austismuskek139]

Are you ever gonna make a new 3ds xl housing replacement video? I'm thinking of swapping the housing for my new 3ds xl with one from ebay but there's some extra parts I see in photos that I don't know what they'd be used for.

[@neotil1]

Ah sorry I've kind of switched to camera repairs

[@Man_of_Oil]

Do you think its worth replacing a screen if its significantly yellowed? or is that something that can be managed in a different way?

[@m1tchy1]

Do you have Luma 3ds on your 3ds?

[@m1tchy1]

If you do try change the top screen with a bluer filter to counter act the yellow

[@m1tchy1]

Go to rosalina menu, click screen filters, click advanced configuration, click L to toggle between update both screens and update 1 screen, change the top bluer to counter act the yellow. If it doesn't help then get over it or change the screen.

[@Man_of_Oil]

@ m1tchy1 yeah unfortunately the yellowing is only around the edges, so the filters don't help so much. I was wondering if you could fix it by sitting it under a UV light or something, lol. I bought a new screen to do a swap but I might just bear with it since it's honestly not super noticeable in-game.

[@neotil1]

Honestly, leave it as is. I still remember my first 3DS repair. It took me a week and I was scared I was going to break something the entire time. Now I have the movements down and can do it super quickly, but it's really not something you want to do on a console that's working well. You don't want to end up with a non functional display, haha :)

[@Xyros0]

is the whole process the same for the new 3ds xl?

[@UnPatoMas.]

Thanks you so much, I was able to repair my camera with your video ❤️

[@russell9995]

why don't you remove the power cable first?

[@jonjonmia]

Do you think you could do another video in this exact same style but for the original 3ds xl? I love all the tips and tricks you give throughout the video

[@neotil1]

Unfortunately I don't have an o3DSXL to fix right now... Lately I've been focusing on Gameboy and analog camera repair. Have you seen my old video with the Pikachu o3DSXL?

[@jonjonmia]

@@neotil1 yeah but it was a bit fast for me. It's no problem though, I just used an ifixit guide and your video together to help me out. One more thing: Do you think you could diagnose this problem with my 3ds xl? I recently bought a broken 3ds xl (original) for pretty cheap. When I go to turn it on the blue light turns on but nothing else happens. No flashing screens, no sound, no anything. The light stays on endlessly though. I followed your video and checked every ribbon connection to make sure there was proper contact but I still have that same blue light. What do you think the problem might be? Given you mostly focus on retro right now I understand this may not be up your alley but you probably know more than me. Thank you!

[@neotil1]

Oh, okay. I might make some more videos if I have the time. About the light that stays on: That usually indicates an issue with the WiFi chip. Try reseating it, and if that doesn't help, replace it (it's needed to boot). You can also try disconnecting the camera (and leaving it that way), because a damaged camera can also prevent booting. No camera will only lead to an error when using the camera app. Other than that, the 3DS will work just fine :)

[@jonjonmia]

@@neotil1 alright i'll try it out! Which ribbon is the camera again. Is it the black one on the top right?

[@neotil1]

Yes 👌

[@drifloonsupremacyassociation]

when i try to power on, tghe blue light turns on and then back off. when i try to turn on again it does power on, but the touch screen doesnt work help!

[@sergiocarrasco-sq6it]

Hey man! i have a small question, i have a n3DSXL with a capture card installed and both screens have gone bad, i think the lcd screens broke, is it harder to replace the screens with a capture card installed? or is the process the same?

[@MarcyValentine]

The screws in the back of my 3ds won’t budge

[@Orpheusftw]

I ruined my new 3ds trying to repair a faulty speaker (BIG mistake) years ago with nothing but a vague "ifixit" guide. With this video, and a replacement screen/speaker/camera, I finally got it working again. Thank you. It was the worst thing I've ever personally attempted to repair, and I never want to see the inside of one of these things again. 👎 As useful as this guide is, I still don't recommend it to anyone that isn't very comfortable with tiny electronics. I'll be having nightmares about those delicate little ribbon cables.

[@joshguitarOs]

Don’t know if you’ll ever see this but do you have any idea where I can find a replacement new 3ds screen? It’s like impossible to find parts and I desperately want to fix mine

[@queefith]

Could you do a video about the touch screen???

[@JP4560]

Do you or anyone know where to get shells for these? NOT the XL, but this normal size one.

[@buttons3159]

This really helped! I ran into an issue at the end though. Both screens flash so they seem to both receive power, and audio confirms that all buttons work too, just that both screens are black and unresponsive. Any place specifically should I look for incorrectly placed cables?

[@neotil1]

What do you mean by saying the audio confirms buttons are working? Usually ether the screens pop or it boots into the home menu

[@oggiv]

My bottom screen flashes and I hear a popping sound. I've opened it up twice to double check and reconnect everything. The only thing I didn't do was replace the screen, and taking the ribbon cables out of the hinge on the top part of the system. From what I can tell all the cables seem fine. So what are the possible causes here?

[@neotil1]

Sounds like either one of your displays or the speaker ribbon cable went bad

[@nhnguyen7046]

After replacing the screen, sometimes when opening the top screen will flash and then the 3ds will turn off. I've removed and reassembled, double-checked the connecting cables to make sure it's not loose or broken, but the 3ds still turns off. May I ask is this a screen broken or did I install it incorrectly?

[@vicentemonterojofre917]

What do you think about quality? Im think about replace my top screep because yellowing but Im concern about some possible low quality

[@masterdest326]

My corners of my new 3ds xl top screen are bleeding so how do I get another screen.

[@neotil1]

order one on aliexpress/ebay

[@ahmet6144]

Hi mate, do you know if there are ips replacements available? I don't want to replace it with a TN display if possible. Cheers

[@oscarcroqui18]

Hi! Great video, it really helped. I have a problem, the bottom shell doesn't close properly, specifically in the leds part. Do you or anyone have any advise? I really made sure everything is in place. Thanks in advance

[@paulh9761]

Excellent video! You have the exact same screen my customer has (I can tell by the placement of the brackets around the edges of your screen) but I cannot find this part for sale anywhere. Which model 3DS do you have? Thanks!

[@neotil1]

This is a new 3DS. Parts are available on AliExpress but take a while to arrive

[@joseantonioperez2107]

Where did you get the replacement screen?

[@neotil1]

I order most of my parts on AliExpress. If I need parts quick though, I'll just order them on eBay in my country.

[@Mozzhiato]

Amazon sells one for 30 bucks by no other than Nintendo

[@neotil1]

The displays on AliExpress/eBay are also original screens and they only cost around 10$ :)