New bearings in the Krause disk

Replacing the bearings, I did use greaseable bearings the old ones were not ! Had to drill and tap the flanges because we used the last of the ones with zerks

[@gleanerk]

Determination not to go but you was more determined to get if off ! Thanks CE n son

[@cesmith4566]

Thanks Scott! Last one got to go!

[@burningdinosaurs]

That's a lot of disc for only 2 wheels! Adding duals inboard of those others would help a lot! Man, I haven't changed bearings or discs on a disc for YEARS! It was fun to WATCH lol! Now, you just gotta get the right weather to go USE it lol! Thanks for the video!

[@cesmith4566]

Yeah measured it up not enough room in front of the rear gangs! Maybe heavier axles? Raining again thanks for watching

[@AntonioClaudioMichael]

Good old farmer life lots of maitinence and repair

[@DennysCountryLife]

That harrow didn't want to let go! Nice work on the gang. I'm sure you'll feel better when you out dragging it now that it's done.

[@AntonioClaudioMichael]

Great video as always Ce

[@scottpearsontoolsmore185]

Great video thanks brother. Lots of maintenance to keep everything going good. Keep up the great work see you in the next video thanks again brother

[@cesmith4566]

Might as well do maintenance it's too wet and cold in the field! You feeling better? Thanks for watching

[@scottpearsontoolsmore185]

Yes sir I am feeling better just trying to get strength back. I have been trying to keep busy. Thanks for asking that means a lot

[@timerfarms113]

Always fun times working on a disc already replaced few bearings on mine this spring. I think tandems on the center section would definitely make a big difference. That's a lot of weight there for two tires surprised it didn't come with a tandem axel from factory.

[@cesmith4566]

Even when they're not all rusted together everything is tight and heavy, lots of fun! I want to think this was an early model cause all Krause disks have dual wheels now! Thanks for watching

[@Masseydriver]

On my IH disc I can take the bolts out of the bearings and drop the gang without removing the standards also. Tandems would make a huge difference on that heavy disc. I believe you were talking about Lowe and Young for parts?

[@cesmith4566]

Lowe and Young ,there very good with parts I've called them and they shipped them to me. Thanks Massey

[@AntonioClaudioMichael]

That bearing seen better days

[@lakesideranch]

Happy Friday CE! That old girl really fought you pulling that harrow off....lol You folks finally getting some better weather there so you can finish up your spring work? Work safe, see ya on the next 1 Doug@ the "ranch"

[@cesmith4566]

Thanks Doug! Rain predicted for the next week! Not good

[@clintlambeth2045]

Are the 2 bolts screwed into the endcap there to give you something to hold on to when you get the nut off on the other end?

[@paulking5611]

whats the small bolts in end of axle for?

[@clintlambeth2045]

I think they are there to hold on to somehow while you screw the nut off on the other end of the axle. Otherwise the whole thing will turn since its a round axle. What do you think?

[@SoybeanFarmer3300]

oh the hours I have spent on this job site with no torch. I want a torch. I really need to break down and buy one.

[@cesmith4566]

It pained me to watch you take that plow apart! Yes a very helpful tool on the farm! Fabricating or demolishing very handy ,thanks for watching Soybean Farmer

[@j.c.smithprojects]

man that thing didnt want to come off....that might make it lighter on those axles.

[@cesmith4566]

Never fails you want it off it won't come of! You want it on it falls off! Lol

[@AntonioClaudioMichael]

I would of asked for some of the money back and showed the guy you bought it from that it broke down as you took it home but it was an auction they dont have to

[@cesmith4566]

I was glad to have got it for 3500 just wish it would have made it home! Thanks for watching and commenting

[@outcastprojects6733]

Make farm equipment great again!

[@cesmith4566]

Yeah I like that! Thanks!