New bed wood 63 chevy c10

[@oldsbuilt8740]

Great to see you back working on the ol 63! Wood bed looks great in gloss black! Gives me inspiration to get after my 65! Great work man!

[@rudyflores9395]

Its awesome to see you back sir been a while but glad to see you working on the old 63. Floor really set her apart color went really well. Yeah at the end there the pup stole the show bueno sir standing by for the next 1 can't wait to see the other kool classic you'll be restoring Happy Holidays.

[@CarGuy2024]

Thanks for the great videos, you have taught me a lot, enough to take on restoring my 68 C10. You are a great teacher!

[@TheCrackerBox]

Happy to see you back ! Thanks for another , Brother !

[@bryanknuckles3322]

Great to see you back at it. Love your videos, been watching you for years. I have a 62 step side that is an ongoing project. I appreciate all of your expert advice and comments. Thanks for sharing your work.

[@bigpauliesgarage1311]

Man i just love the projects you do, you give me great inspiration to get out and work on my truck. Keep it up bro ive been following for quite a few years now

[@jessegonzales6780]

My opinion, I think you're the only one put out some good videos Nice work. 👍

[@phooesnax]

Looking good. Thank You for posting

[@kevinkbradshaw2239]

Glad to see ya back. Favorite channel on KZbin. Keep up the good work

[@markwilson1906]

I like your Videos I have a 1966 c10 truck short bed

[@JLMiller410]

Bed looks good. You got some tough knees!

[@ronster6656]

Still love every minute of watching what you do with these trucks. Your results are always off the charts.

[@WesW3187]

Good to see you back. I loved seeing the dog sitting up front as you were cruising along. Cool.

[@garylane248]

Nice to see you back ..

[@patrickchristie82]

Bed is now shiny. Maybe the truck needs a bath and patina sauce?

[@vicmontes7314]

I cut a Black Locust tree down on my yard and made the bed from it...Locust is rot resistant...unlike oak.

[@Telephony954]

Good to see you again. that is a fine job, and shows real skill, and pride. Happy Holidays. That's a happy lookin pup. Be well.

[@billyporter2195]

Good to see you back , enjoy your no nonsense approach 👍

[@macho4x4warlock98]

Nice job!!!

[@rrswitch48]

Lookin great Steve!

[@randylatiolais-hl7bj]

Great work looks like the dog likes the old truck 👍🏻

[@Mayhem-22]

Thank you for takin the time to post another video always enjoy what your doin with these trucks. I’ve always had a 64 c10. My first vehicle was a 64 and then I bought another in the 80s it’s just been sittin around it’s all original and it’s time to get freshened up. thanks again see yea soon

[@robkeller3431]

I put a new wood bed on my 57 stepside, by watching your previous videos when you did it. Gave me the confidence to do it myself. Thank you!

[@HydroRat]

As usual, well done Mr. Gibson. I will have to do this at some point so gonna save this one in my C10 library. Thanks!

[@primeredisbest]

Hello Mr. Gibson! So good to hear from you again! I really enjoy your videos! I think of you whenever I get my 66 Chevy C10 truck out. I've learned a lot from you! Have a blessed day today my friend and God bless you and your family always!

[@HydroRat]

Hey I know you Jimmy! I've learned alot from Mr. Gibson's videos too!

[@foch3]

You do good work Gibson. It makes me happy that this is just your truck not some rich guy paying you to do this.

[@guyfuller1369]

Just had to comment again. I don’t know why the algorithm has never kicked your videos into my queue, but I’m sure glad it did today. New subscriber from the bald-assed prairies of Canada. Love that old C-10. It’s a survivor, just like me. Thanks!

[@dalecarmody8631]

Hello from Millington, you just solved a problem I've been wrestling with on replacing the angle strips. Thanks

[@jasonseal2692]

Welcome back. Nothing better than a cruise with your best buddy. Especially if it’s in an awesome classic truck.

[@williambutler8624]

Looks great as always, the Truck is really looking good, the Rally Wheels are Sharp, your videos have helped alot of us with our C10's, owned a 66 C10 for 38 years, Great Video, THANKS.

[@hughmansgarage8680]

Welcome back. Great to see you again. Keep em coming. Love your projects.

[@blackwingsat]

I wish i had the time, money, the will & resources to work on my 63.

[@dustinsirrine227]

Sell it to me and you won't have to worry about working on it again😊... Merry Christmas. Keep On Trucking Brother👍...

[@bettyro1959]

Love watching your content, such an inspiration, clear concise videos without any BS! Hopefully I'll have my 64' SWB on the road soon; it's a runner but needs lots of work. Thanks!

[@DarrylzssDarrylG]

Hi Steve. Great video. I needed this one. Same project about to happen with my 64.

[@jameslarkins2736]

Another fine job. I enjoy all your videos.

[@docmccrary5838]

Great job Gibs!

[@thelowchango]

Excelente como siempre. Es un trabajo que todabia me falta hacerle a mi 64, pero la mía es caja ancha. Felicitaciones!

[@blyndeyed]

Nice, I've been waiting for a new video!

[@punkinsgarageandpaint8299]

I love the black stain!

[@tnguy9696]

That six 3 is looking 👀 good

[@luisbatista1103]

Great to see you back sir 👍🏼👍🏼👍🏼👍🏼🇨🇦

[@matthewstrickland1773]

Glad to see you back at it.

[@mironeko3820]

Looks sharp

[@verifiedhp]

Turned out nice, also that truck is perfect for some Poppy’s.

[@pedroalejandro8324]

Next time u have to do a job like this I suggest u try using a hole tru ratchet which will be perfect for those long bolts to help u speed up ur work n keep u from using a wrench to tighten those nuts with long bolts,even a ratchet wrench would work great for this job.

[@Gibson63.]

I did use the ratchet wrench with flexible head works great thanks man

[@hermyherm365]

Dude i really enjoy your videos bud !!

[@RESTORATIONRESCUE]

!Awesome job as always! Keep up the great work!! Can't wait to see the black truck next to the red one next year at the show!

[@JohnPeterson-dj4zf]

Nice brother

[@robertrock8411]

I’d like to see what you do with the radio!!!!!!!

[@douglaslambert579]

Good to see you back!

[@number7__879]

Yes Sir!!!

[@TheFrameoff]

Nicer job ... Build On

[@guyfuller1369]

Sandpaper, linseed oil, and a magic wand and you coulda brought that old wood right back around . 😂

[@MillCreekFabShop]

Looks awesome, where the heck you been?

[@Gibson63.]

Been busy with construction ready to start back on this old truck

[@MillCreekFabShop]

@ Glad you are well and good to see ya.

[@rodmacisaac5963]

Great video as always! Thanks

[@dustinsirrine227]

Looking really good Brother Gibs, my clutch needs replaced in my 63 C10 as well, I've been babying the clutch for a few years so next summer it's going to get changed. Stay safe my friend, Big Daddy looked good driving Blackie, how'd he like it compared to his Blue 63? Hope to hear from you again soon Brother Gibs. Merry Christmas... Keep On Trucking Brother Gibs👍...

[@andynicoll8566]

Been a while, lol, but always happy to see another vid from you.Wouldn't this be a good time to replace that 60 year old wire?

[@Gibson63.]

Yes wiring may be the next thing on the list

[@bryanknuckles3322]

Question What kind of welder do you use for panel work? Do you use flux core?

[@Gibson63.]

I use the Lincoln mig 135 welder with gas

[@bryanknuckles3322]

Thanks

[@GabrielGiron-g5o]

Merry christas is not a Holiday 🙏🇺🇲

[@oswaldocontreras1360]

Good to have you back I have been watching most of your videos, the red , blue and the black and I realized most of your videos go back few years have watch every one at least 3 times, now I got no idea whats going on this video started with your voice then it switched to Spanish, ha no problem I do speak Spanish but it is funny and don’t know how to get your voice, I don’t get allong with technology so dont know what to do, as a retired body and fender man I really appreciate your work.

[@Gibson63.]

Go to top right corner to the settings wheel click on audio track you can change the language. Thanks for watching

[@NeilPost71]

Christmass came early!

[@Sgtzo2017]

Good to see you again. I started to think you weren’t coming back.

[@therage10]

Don’t care how frequent you upload, this channel is still for me the best c10/restoration channel out there. Thanks for another great vid. I fixed my 65 stepside watching your stuff