New Building update!!...Homemade cedar siding cut and install

[@HenrikNoaksson-g3g]

Hello from Sweden 😊 just have to say I love your KZbin channel ❤️ Have followed you here on KZbin for almost 18 years. Time flies when you're having fun. you are the best ❤️

[@billstmaxx]

Thanks :)

[@justinzaso926]

Hey Bill, A Paslode nail gun sparking when driving nails usually indicates a problem with the power source, most likely a failing battery, a faulty fuel cell (gas cartridge), or a dirty contact point within the gun, causing a poor connection and sparking during the firing process. Potential causes for sparking: Low battery charge: Check your battery level and ensure it's fully charged. Expired fuel cell: Check the expiration date on your fuel cell and replace it if expired. Incorrect nail type: Make sure you use the correct Paslode nails designed for your specific gun. Dirty contact points: Clean the contact points within the nail gun with a soft cloth or compressed air to remove debris. Damaged O-rings: Worn or damaged O-rings in the fuel cell can lead to gas leaks and sparking. Damaged firing mechanism: If the internal firing mechanism is damaged, it could cause sparks.

[@Darryl603]

HAPPY BIRTHDAY! The chest mount camera actually worked out good, Bill! Bummer about the trusses though. Thanks for the update.

[@GTFarming]

im enjoying these videos on the shed build alot more than say a bucket build as its timber and im more interested in timber work

[@performancesbyethanboudrea9613]

keep up the amazing videos 😊

[@billstmaxx]

Thanks! Glad you like it

[@kdog2033]

Happy Birthday Buddy, from BC! 🎉 keep up the great videos 😊

[@jimgrussing2301]

Looking nice 👌

[@GTFarming]

OK ive learnt something today and im only 8mins into the video - i always measure the length i need then add the width of the board on for the angle but the way you did it seems quicker

[@Robert-wx2dw]

Happy birthday bill

[@billstmaxx]

Thanks

[@CF21LDB]

Happy Birthday Bill 🎈🎉🎂

[@billstmaxx]

Thanks

[@rdodds4719]

may look nice to add a small thin cedar shim over the joints.

[@John-viheavyequipment]

Is it possible to build a fake rafter in the middle on both ends and get a big enough tarp to put over it all? atleast it'll dry out a bit till the spring?

[@billstmaxx]

id like that. With our winds tho it may not last

[@John-viheavyequipment]

@@billstmaxx yeah thats true, and that siding looks better then i thought

[@rdodds4719]

the snow/ rain would eventually pull the tarp down in the center

[@jeffblack2014]

Bill just curious as to how much your new garage will cost.. I just had a 12x35 ft steel building put on concrete and the total was 22,000 dollars. That’s concrete and building..

[@billstmaxx]

well i now the wall studs i cut i saved over 6000.00

[@GTFarming]

@@billstmaxx yeah price of Lumber over here in the UK is crazy expensive

[@Darryl603]

@@billstmaxx That mill was definitely a good investment.

[@John-viheavyequipment]

what about stagering the lenght of the long borders so the seams dont line up?

[@billstmaxx]

along the long wall for sure

[@bitsnpieces77]

Aren’t you worried about it cracking when it dries and shrinks with all those nails

[@billstmaxx]

cedar shouldn't go to far