New Cabover Isn’t Usable..Weston’s Peterbilt Is Looking Amazing!!

[@Gentryandsons]

kzbin.info/www/bejne/mWbRYWiIeLufZrc here is the new Channel Go Check it out!! So much stuff to come..

[@Tysmopars69]

I would take that plate and get it cut with a precision cutting saw and cut 3 to 4 inches from the inside of the frame and cut it to the 5th wheel plate that would give you some leeway for your kid pin so if you come in crooked you have room to not break that cover now for your airlines and power cord the ball is in your hand lol that’s somethin I ain’t never had to stretch or adapt so I ain’t gonna act like I know it all 😅 but nice truck brother I can’t wait to see what you do with it , And what kinda Tune your going to do with it

[@chairmanchairman7258]

are you giving away prices the scam has come up again someone claiming to be you is inviting me for my details so he can give me a price.

[@Blackjack_focus_st3]

I love your little donkey.. he's so cute...

[@braddalton9260]

U should do body swap pick up new take off sleeper and get a cab off 389 would be best way to get the best of comfort and then it's just sand and paint

[@justinweaver8787]

Id go get the w9 back sir if ur able 2. You know the truck an then ull have best of both u got the cabover u wanted an still have the w9 to. Jus my opinion

[@chrispbacon4480]

Man i miss that W9. My favorite truck. I thought it was a bad decision to trade that W9 on a show truck, and that was before Tim decided he needs to change a million things on it to put it to work. If the opportunity is there i would be bringing that W9 back home.

[@badeclipse8685]

Agreed

[@StortWeldingCoLLC]

@@badeclipse8685 IM WITH YOU!!!!!!!!!!

[@nostreamavailable9090]

Totally blown away by the strength and courage of Ronnie, even facing health issues he’s still able to smile and laugh along with you and share a joke, that’s courage and bravery. And the love and friendship you all have for each other is just beautiful. 🙏🏻🏴󠁧󠁢󠁥󠁮󠁧󠁿❤️🇺🇸

[@StortWeldingCoLLC]

DITTO

[@HammerHead524]

JUST WANTED TO SAY THANK YOU FOR WHAT YOU DO FOR THIS COUNTRY. BEING A TRUCKER ISN’T ALWAYS EASY BUT ITS YOU GUYS THAT KEEP THIS COUNTRY ROLLING! So thank you!!

[@daveshangar6820]

Remember Green Acres sitcom? Gentry Acres is the place to be. Fun trucking is the life for me. Rebuilding every truck we find. Hitting that road and leaving it at all behind.

[@Eric-eg6uh]

I not concerned about the w900 going down the road,we have been able to see another piece of American history and engineering great channel my favourite always something interesting and different like the way you think Tim and entertain us keep up the good work

[@robertowens3657]

Will be praying for uncle Ronnie hope he makes out fine God bless y'all

[@jimruby9316]

Wish Ronnie speedy health

[@richwoodcock637]

Speedy recovery to your uncle. I think your uncle is a veteran so besure to check into his VA benefits for help if you haven't already.

[@r.a.6799]

U r the best family man,n it doesn't get better than to work with the family.... Priceless...

[@micksroversmg558]

Hope Ron makes a full and speedy recovery! Love seeing the old boys Ron and Larry still chipping away working it inspires me too get fit and back into it one day!

[@donnatalielucasheimbigner7598]

Praying for Uncle Ronnie to be RESTORED to new. Love the frame work on Weston's truck. It will be a sweet ride. Glad that Love's customer service was so good for you. Y'all be blessed.

[@kc7wzl]

My father had the same thing happen to him... He contacted Loves corporate and every thing was worked out... my dads lesson was always get your receipts for every thing !!! even if your just getting a soda water with the rewards points!!! With his receipts he was able to prove he was over 2000 miles away!!! So it was not him and had proof!! make sure all your drivers also do the same!!!

[@kimery73]

You are a awesome family man you always put family first ur son is very lucky kid to have a dad that want to hang out and show him the ropes. I've always been a mechanic and I showed my son for the time he was 12 how to work on a car and now he is changing motors by herself and power steering pumps doing whatever any kind of car Subaru Chevrolet Fords it don't matter and he's only 23 now so good job to hang with your son family time all this matters are you going to make money but you know what I'm saying have a blessed year

[@gavinniles60]

Thinking and praying that your uncle Ronnie gets his health back Keep up the good work and wish you all the success you deserve May god bless you all

[@uliwehner]

4-door KW 100E with the double-bunk sleeper would be awesome. that way you can take your buddies along. Aerodyne cab and you can run around in it.

[@derekkessler7752]

Front T bar don’t matter, take it off imo. Cut fiberglass and remove from fifth wheel back. Then box in with steel and make ramps then paint match. Put the necessary money into making it how you want it. We’ll watch! You need a Nice Cabover to match Braxs. Father and Son trucks. Also looking forwards to Ya’lls farming channel. My lil man enjoys watching the vids with me, so thanks for keeping it PG 👍👍 God Bless from my Fam to Yours

[@ericgriffin397]

Yeah, spend all the time with you family because tomorrow is never promised!! Love all your videos!! Be safe, God Bless and spend time with your family!!

[@nickd.4512]

Ronnie's just like the rest of us. Your body's check engine light is on but we just keep on rollin. And he keeps up his positive attitude. Nevermind the pain, im bored and we got work to do. 🤣🤣 And tim, you definitely have a lot going on. You seem to be doing everything ever, all at once.

[@CARRIERGUY]

Hope ronnie has a quick recovery!

[@Drew_379]

Definitely will be praying for Uncle Ronnie. My old man is a Vietnam Veteran so I know these are some tough ole boys

[@chadshelton4340]

Love the new channel. The new cabover is awesome. Bring the Kenworth back home

[@waynekibich3753]

That would be cool if you can get the KW back for a good price . Hope your uncle has a speedy recovery

[@TheBallewLife]

My Grandpa Tracey Loved Mule teams!!! He even made his own mule team wagon put of pure wood and won first place for it!!! He has a mule team on his headstone pretty neat!!! Mule teams are amazing!!!

[@jeffreykbevins7116]

I grew up on this farm that I live on here in Eastern Kentucky and I am 58 yrs old, so I grew up working mules and horses and I really like them both . I still have a 2 horse wagon that my dad bought brand new, when he was a young man and he was born in 1921 on August 13 and he died on August 17 in 1997 and my dad and moms anniversary was on August 15 . And my dad loved working with mules and he had been working with them and riding them since he was a little boy . Your comment reminded me of my dad and just wanted to let you know . Take care, as always Jeffrey !!! 🤗👍💫

[@tommyhall2768]

Tell Ronnie I hope he gets better soon say a prayer for him

[@Twister-10228]

I pull the fiberglass cover off, just to make sure something is not hidden underneath it. Can always put fiberglass cover back on. You just never know Tim?

[@justinsteele8399]

Prayers for Ronnie. Love the new cab over

[@robdagr8te]

One thing about loves they preach customer service from the top down.I had the pleasure of meeting Tom, Jenny, and Greg love at loves university and 2 RGM conferences in OKC they seemed like great kind people, especially Jenny she would always talk with the cashiers and almost everyone on the staff when they came for quarterly meetings at the store. Tom did from time to time, but it was a great company to work for, I just wasn’t in the place in my life to put in the work it required. In the end they taught me how to rub a business and now I work for myself. I still thank them for the knowledge they gave me. Shout out loves, Kevin bray, Bernie, and My old ARM Shawnda!! Great people sorry I let them down back then.

[@phillipcalhoun9618]

Prayers for healing and a speedy recovery!

[@mattnalley8872]

I first started watching Weston when he first got the Perterbuilt. It is why I started following him.

[@cornellmukes95]

Prayers for uncle Ronnie 🙏🏽 ❤️

[@donaldrobey4182]

Prayers go out to Mr Ronnie I hope he gets better soon and you're doing one hell of a job with your business brother keep up the good work I love your content it's awesome.

[@FLA30561]

Uncle Ronnie is a Marine he is not trying to hear that take it easy mess. Get well soon uncle Ronnie.... Larry is doing a bang up job doing it right with the fiberglass filler before the plastic filler on the frame.👍🏽👍🏽👍🏽

[@StortWeldingCoLLC]

HES AN ARTIST!!!!!! I WONDER HOW MANY TIMES, THIS WILL MAKE ME A WINNER TODAY? IM GIVING ALL MINE TO RONNIE!!!!!!!!!

[@jucabalapiloto]

Congratulations !!! Very Amazing Your International ,I am from Brasil and I have a International 9800i COE ,and I put a Cummins NTT Big Cam III with a Eaton Fuller 18 Speed! God bless You and all your family

[@kennyspry5189]

When winter gets here and thing's slow down. You need to get your CASE Tractor to Larry and have them repaint it and put Dual Tires on it. With Dual Tires on it then you will be able to see just how awesome that tractor really is...

[@justinepicgaming5774]

You got your brightness up on your videos again

[@danielloveall2952]

Prayers to Ronnie I Understand what is going through I had emergency surgery Mother's Day and they put a cloth from the bag on me but I'm due to get it off here 1st fairly soon though it's not fun and I'll start with diverticulitis And we are proud of him and hopefully he gets better soon

[@roush7573]

Buy the w9 back and use it for the rgn trailer you don't want to put ramps on the cab over

[@nostreamavailable9090]

Totally agree with you mate, buy the w900 back and just have the cabover as a treat himself , show truck or light duty hauler God knows he works hard enough to deserve both 🙏🏻🏴󠁧󠁢󠁥󠁮󠁧󠁿❤️🇺🇸

[@colestroud8300]

As much trouble as he has with that RGN, he needs one with a pony motor, or put a wet kit on the truck.

[@codymedeiros7462]

Those 2 guys are really good, great attitudes hope he feels better

[@nostreamavailable9090]

Prayers for Ronnie AND Larry from the north west of England 🙏🏻🏴󠁧󠁢󠁥󠁮󠁧󠁿❤️🇺🇸 Love and respect for Larry hanging in there and keeping going on with projects holding the fort, pair of heroes there 🙏🏻🏴󠁧󠁢󠁥󠁮󠁧󠁿❤️🇺🇸 Best wishes from the north west of England Jay

[@joshf8633]

Get your w900 back it's such a good looking truck and you have it done so much to it

[@kennethperian4370]

Great job showing and telling, on the truck frame keep on trucking see ya next time see ya bye.

[@richardbryant7961]

Hope Ron gets fixed up soon God bless you and your family Tim

[@AdventuresWithTheHudsons]

Sending prayers for Uncle Ronnie! 🙏

[@dodge33445]

Prayers for Uncle Ronny. Get better friend.

[@jim4448]

I know for myself I was a Is Heavy duty mechanic. I really had no choice but had to retire.. At 64... I did go to work for a dairy farm.. Is only worked about 6 hours A-day... More than enough for me.. Work on tractors and equipment.. Also made some local deliveries... To stores delivering milk.. Did that for about 6 years... now fully retired..

[@mikegrant5356]

Love the new cabover really hope you bring the W9 back home

[@dodge33445]

I agree with you TIm on the T bar.. and U will make the right decisions.. More of an old school feel..

[@82randyacman]

Hope your uncle feels better soon there doing some awesome work.

[@dylanvernon6797]

Shorten the tbar make it closer to the frame on the truck not so low to the ground but bring back the W9!

[@TheOUboy]

Prayers for Ronnie. New channel is going to be cool.

[@godfreyrt]

Tim when you get to it try out black chrome vs polished chrome that will stand out because you never see Black Chrome on a big rig!!

[@justinweaver8787]

Prayer's for uncle Ronnie he is a strong vet i gpt faith he will be fine.

[@justinweaver8787]

@Gentry_and_son_trucking_1 get a freakn life!!

[@steveperyer4850]

Something that looks beautiful, is not a work truck. I know that you have the knowledge and experience to get it work ready. It is a beautiful truck, and it will make money and bring smiles to all that see it. Yes I would cut the end piece of the frame cover, so it could be removed or put back on as you need it, for whatever your needs are. Your uncles are making a masterful job on Westons truck. It will be very special truck when finished.

[@dansdiesel767]

All the good channels always get bigger than their content allows then we get anything and Everything in videos takes the fun out of it

[@VATION3RD]

Yup like VISE GRIP GARAGE

[@jerredwayne8401]

@@VATION3RD Still the greatest channel on KZbin

[@CoolCarsKJ]

@Vätiøn Sims III what's up buddy!

[@jesstill7833]

Hi Tim they all run good empty put a load on the Bastard and then we will see if it’s got grunt ..I still can’t believe you got rid of W hope you not sorry later on keep on trucking stay safe 🚛🚛💪👍💪👍🦘🦘🇦🇺🇦🇺🇦🇺

[@krishimmel6747]

In Weston's truck put power door locks power windows all operate from the driver seat that way you can roll down the windows in the back while he's driving yeah hit the button lock the doors a sunroof is it going to have a shower bathroom a refrigerator stove by the sounds of it you're making a pretty good size sleeper I seen a truck semi out here in Las Vegas it was a peterbilt black one going to the lakes that's what they call it out here real expensive homes I seen a four-door peterbilt semi truck it look nice

[@airbosn9950]

My prayers to Uncle Ronnie!!! Being a vet, learning from guys from the Vietnam era, us younger guys appreciate men and women like Uncle Ronnie. I think that Pete should be classy, black interior with some great exterior colors. I was thinking. With as much work going into that frame to paint to match the frame.

[@Shennanigans5.0]

That "on hold" music is a banger! Everytime it plays on a call, I start making up lyrics that go along with it 😄

[@truthseeker3512]

That rusty exhaust is really a custom touch on that "show truck".

[@MrMan-ol4ic]

Lmfao 😅😅😅😅

[@joshhorton6393]

😂😂😂

[@benjaminstockton3917]

Thanks for sharing Tim appreciate the channel buddy 👍

[@tommorris5969]

Hey Tim I will pray for Ron bless you and your family

[@kevenhiemie]

I think you should think about contacting MayWes poly products out of Minnesota and have them build you a custom poly ramp for the new cabover. MayWes is a very KZbinr friendly company with their own channel and a lot of work with the millennial farmer and Larson Farms.

[@christhomas5794]

I deafly try and get the W9 back big respect from the UK

[@robert-vt1fq]

Your generator acre's channel is going to return out so lovely so wonderful for the family I can't can't wait for it to come out God bless y'all all your stations are all lovely God bless the family and God bless everything God bless you all have fun I can't wait to see it all God bless the animals and God bless everybody have fun and can't wait to see it all and great God bless the the business and can't wait to can't wait for it all have fun

[@roryrobinson4947]

Prayers going out for Ronnie

[@rickscott0949]

Yep, did my "71"El Camino taking it down to bare metal, sandblasting the frame then priming it with DP-90 and then black Imron before putting 1993 Thunderbird, Royal blue poly pearl w/red pearl in the clear coat on the body w/black vinyl top and a 1in.tall black fiberglass cover for the bed, all in approximately 7 months. Oh yeah,my cousin that was the paint & body man, also helped me to build the motor that would eventually get it down the road. It was a 454 punched 60 over, making it a 468 c.i.w/dual quad tunnel ram, and that was burning a lot of midnight oil to get e'r done for an invite show at Detroit Autorama Cobo Hall. It got first place in it's class for it's first of many shows. 😎

[@johnnyo7621]

Weston's a power hungry man LOL APART from making it look super nice The more power you can make for him the happier he will be LOL MORE power MORE smiles

[@glindabeaven6805]

Prayers for Uncle Ronnie i had one of those bags for 14 weeks and they reversed it. It was the most miserable 14 weeks in my life plus the recovery time involved. I would not wish that thing on anybody its a miserable situation. Thank God that mine was reversible hope everything works out for him

[@brandonm6052]

I like the side fairings on it. I always loved the look of a dual intake dual stack setup on the cabovers. I grew up riding in my first truck just like this, it was an old yellow with red stripe IH that came from Dahlsten trucking in Clay Center, NE

[@gruesomely2760]

ngl that other dude came up on that monster of a KW still a beautiful cabover. I know Gentry is going to show it lots of love and turn it into a beast.

[@matthewromano8801]

That hold music is hilarious. The same music for my bank, my credit card and some other random company I had to call 2 weeks ago 😆😆

[@privilegedwhitemale306]

Stoked to see Westens build. Yalls killin it. Thats a huge project. This sounds dumb, but hide a winch on the front. I could see it being used.

[@chuckthomas8176]

Great , I love mules , ran a team , back in the day , love donkeys .. still have them . Iam excited to see your team .and the adventure

[@mikebowman2445]

Prayers for Ronnie

[@bowslap]

I fully expect to hear you’ve bought the gold W900L back here in a couple of videos….it’s a good tractor. If I were in the market to buy one, I’d do it with no hesitation. The new cabover….it’s a neat item, but fully illustrates the differences between a “show truck” and a “working show truck”. Full confidence you’ll have it sorted in short order…..thinking BOTH t-bars should probably be removed and the rear fiberglass cover, along with a new 5th wheel to go with the RGN ramps. The progress on Westen’s 379…..that thing was a hot mess from the go, glad to see it’s being rebuilt/modified the right way by competent individuals. All the best to your uncle Ronnie in his recovery…..

[@harrellmorlan6817]

Tim you must have bumped your head tradin a w9 w/N14 Select Plus for that coe IMHO lol. Enjoy the vids, great content as always.

[@Tafari271]

Said the same ting lol

[@leejohnson6173]

Who wants an n14, that's ultimately why he got rid of it lol

[@Tafari271]

@@leejohnson6173 u definitely don't know about engines

[@micksroversmg558]

@@Tafari271 My favourite Truck engine loved the ERF EC 14 celects back in the day plenty of power and reliable run like clockwork! One man's truck rand day and night done two million km before he sold it original engine was still going but smokey! It had two Turbo's and a set of big end bearings in 2m km!

[@Tafari271]

@@micksroversmg558 thats what am saying my pops got two cabover one is a celect and the other is a red top celect plus no problems whats so ever

[@chubbzy24153]

Cut it behind the 5th wheel...do the body work to the cutoff piece...put ramps on the frame...take it to shows with a trailer on it....don't worry about the pogo stick or "catwalk" fiber glass just the back piece

[@jaredspear8140]

Damn Tim. Those are the only words that come to mind. Westin’s truck is coming out nice! The team is an awesome idea. Keep Ronnie heading in the right direction.

[@ben6119]

I hope all your relatives medical issues get better soon, enjoying the updates!

[@JustaMechanic92]

I just wouldn’t have traded that kw for that cab over. Yea it kinda looks good. But that kw would’ve looked so much better painted and done how that cab over is. Plus the Cummins in it.

[@Mike__james]

Thats good it isnt your truck

[@JustaMechanic92]

@@Mike__james yep. That’s right.

[@Tafari271]

Thats the ting thou when u run a KZbin channel you can lose traffic when you make certain decisions, look at dde for example they brought back a huracan just to please there audience. Its the same here. You trade a damn n14 celect plus for a cabover detriot i know its his fav engine but damn

[@jerredwayne8401]

I mean this truck doesn't even look that good

[@biggestpanda6477]

He paid all that money just to change everything. I’ll never understand that thought process. He’ll never get it done anyway. He’s like old Bruce. Soon as he gets something started he sells it for another half built junker. He bought the new truck and hates the fenders, the t bars, the stacks, the fifth wheel, the deck plate, the hose box, how the lights are wired, how it’s tuned with no power, the transmission. 🤣 wut. If he would just spend his time and money on the yellow cab over he already has he coulda had a nicer truck and a build series to show for it for views.

[@ryanhogan6509]

You need to finish just one truck both the inside and outside, I’d give the interior maybe a strong 6 , on the new cab over, but not good enough to call it done as is..

[@sbellamy49]

🙏🏻🙏🏻🙏🏻❤️❤️❤️ For uncle Ronnie. Get well soon

[@bigdaddycrypto3894]

Prayers for Uncle Ronnie !!

[@bonidaexpress]

Get well soon Ronnie

[@philiplemer4444]

Call your friends over at semi casual and see what kind of ideas they have maybe between the ideas they have and the ideas you have you will come up with something awesome

[@timblackmon3581]

Tim. The cab over is cool, but dang that W9 was my favorite, it ran good, sounded good, all it needed was a paint job, hopefully you get Rooster running soon and you can use it to do your special hauls.

[@hillbillytruckernc]

Awesome video. Love the new cabover. It has lots of potential! That said if you can get the W-9 back for a decent price I'd grab it. Lol. Awesome update on Weston's truck and prayers and good vibes sent for Ronnie. Looking forward to the next video! 🚛💨💨

[@danielgbrittonsr8921]

Tim, I have A 1992 W900L 450 Detroit. I parked the truck in a barn in 2010 because cam went bad. I've been told you can't do much with a DDec 2. Can you put a DDEC 3 OR DDEC 4 ECM on it to get more horse power?

[@johnny22single99]

ABSOLUTELY----> OUTSTANDING!!!!. 🙂

[@billywhite3020]

If I could see my way clear I wood get the k/w back I like that truck

[@joshuahatfield1079]

If you can get the W900 back go for it I know it's probably too much money right now but you know after a couple years I truck pays itself completely off again and it'll pay you back every time that truck is a reliable truck and is one gorgeous truck so please if you can please get it back

[@colesteven1123]

So many comments, of people who know better than you with the cabover... I wish my dad had that level of commitment with me as a kid, to aspire to have matching rigs. Good for you Tim, work it to shut these guys up. They act like it's broke down and worthless

[@cameronlaurent1433]

Yes Tim you need to get the Kenworth back that is a workhorse that will go and go the more weight on her back the better she will work

[@stasiasas7635]

My son said since you got free range of pain and doing all that truck Do you like a vintage paint job and interior something cool vintage that would be awesome you're awesome and you should get the W9 back

[@feisaloduuu1263]

Buy the w9 back if possible.its worth it Tim.

[@jeffreykbevins7116]

Another great video !!! You all were into a lot of different things in this video . The new cab over is a good looking truck, but I can see that it wasn't build to work . But it can have everything fixed to make it a work truck . I think that if it is possible for you all to buy the W900 back, it is a great truck, try to buy it back . I am going to check the new channel out . I will see you all later on another video, so take care and stay safe out there . 🤗👍❤️💫

[@AdventuresWithTheHudsons]

Praying for Uncle Ronnie

[@lleasyll5013]

Just give it lots of power keep it simple and make it look clean with a few parts like a nice bumper and deck plate big stacks, some chrome nice visor and a simple interior

[@rileyfindley7207]

I want that gooseneck ive been looking for one of those yellow ones for years

[@nostreamavailable9090]

God bless America and it’s people, a beacon of light and greatness in a dark world 🙏🏻🏴󠁧󠁢󠁥󠁮󠁧󠁿❤️🇺🇸

[@cherylsiedl230]

Hey I'm just wondering what you done with the Yellow Cab over you showed it being completely down but you ain't showed nothing else damn guy how many projects do you got going on at one time and how many more are you going to take on before you get them done I've been watching you work on that Air Force cab over ever since you got it from Bruce when are you going to get it done and you had it for over a couple years now

[@ky.gambler5281]

@Burt I'd be PISSED if I donated to the go fund me and the truck vanished. It was like the others, gonna paint and all the fancy shit..more hoopla