New Colt Delta Elite 10mm + Springfield RO Elite Update

[@Shooter-1924]

I was fascinated with the Delta Elite when they came out and I finally got my hands on one many years later. It’s a great pistol and it occupies a place of honor in my gun safe.

[@georgelara3730]

Bought a Delta Elite. First 1911 first 10mm. I love it.

[@lylecaudill1446]

Great to see you back on camera. Always enjoy your content. Love the 10mm.

[@chriswilson4583]

I have the Springfield elite operator , had the same problem tried different ammunition some helped some didn't. Changed to Wilson combat mags, no more problems. Shoots everything I put in it. Even the rounds that jammed before. Hope this helps

[@carlosaquiles99]

Have a Ronin 9mm 1911 and had similar issues with the mag from factory. I changed to WC and Es Brown and it shoots perfectly now.

[@jimrodriguez8047]

Nice Delta Elite pistol! Running good and nice fireballs!

[@thinktwice8860]

Kimber recommends a 500 break in period first. After about 400 rounds of S&B and Underwood I had some occasional failure to go into battery issues occasionally. I sent it back to Kimber where they put a heavier recoil spring and polished the feed ramp. I’m guessing it’s either a 22# or 24# spring. They didn’t say. Have had zero issues after the next 400 rounds. Found info on 1911 page that talks about the 1911 being designed for 45 ball ammo. Says the real issue with 10mm in the 1911 platform is the need of a slightly stronger hammer spring, and needing a flat bottomed firing pin block. The 18.5# to 20# works fine after the other 2 changes. I try to use the most powerful range ammo along with Underwood hollow points and xtreme defense. I bought a 10mm because I didn’t want a 40.

[@brianrowan5506]

Colt DE is awesome runs like a champion.

[@kenandkathiehughes3040]

I know this is not current but I just bought a Springfield TRP 10 mm and I had the exact same feed problems you’ve had. I tried several brands of ammo and Wilson Combat and Cobramags. The Cobramags helped but I still had feed issues about 10% of the time. I contacted Springfield and they had me send it in. I sent it two weeks ago and got it back yesterday. Took it to the range today and had perfect performance with all magazines and ammo (PPU, S&B, AGUILA, DEFENDER AND AMMO INC.). They reamed the chamber, recut and polished the barrel ramp, polished the bottom of the slide and tuned the extractor. It feels much smoother now and performs perfectly. If you haven’t solved your problem, Springfield seems to have had some experience with this issue in 10 mm. You might want to contact them. Ken

[@timcasey9531]

Try mating the slide to the frame with Flitz. No barrel or recoil spring, the slide should fall off the frame into your hand when tilted forward.

[@CollinB_EDC]

Man.... you’re really makin me want to get one of those Delta Elites!

[@nolanbailey8057]

Got two and one like he has.great fire arm.never any issues.

[@CarolinaLaserWorks]

I have always wanted a Delta Elite.

[@TheRealZJE313]

Don't waste your money

[@douglaswalther8489]

Mr Nolan! You're back! Awesome

[@NolanOutdoors]

It felt good to finally upload again! I appreciate you stopping in and checking out the video!

[@cheesenoodles8316]

My shooting buddy has the Delta Elite, worked over by Wilson Combat. It is really, really nice. Works with all ammo, smooth, accurate and just fun.

[@djbuzz9998]

Glad to see ya back

[@NolanOutdoors]

Thanks Brother! It was awesome finally uploading again. I just wish I had more time to upload like I used to. I miss it!

[@JTKirk65]

Welcome back . I have a Sig tac ops in 10mm , you have to love a 1911 in 10mm . 👍

[@NolanOutdoors]

Thanks Brother!

[@ztwhite44]

I’ve been checking your channel ever few weeks in hopes you upload a video. Glad you’re back 👍🏼

[@NolanOutdoors]

Thanks brother, I appreciate you watching and for your support. I’ve been super busy but I’m hoping I can start uploading on a somewhat regular basis again.

[@zachmccall1513]

I got a blued delta elite i absolutely love it and wouldn't trade it for anything

[@mattsharp8438]

Little late to the comments I know but don't use loctite on the grip screws. Go to a hardware store and find the smallest rubber O-ring you can that will go over your grip screws and reinstall them. The pressure will keep the grips tight I've never had grips come loose using that technique. Also switch to slot head grip screws instead of Allen's so you don't need a special wrench every time to reinstall you can just use a normal screwdriver.

[@mikethomas5412]

I've owned multiple 1911 Colts and none of them were reliable out of the box. Good video, thanks!

[@NolanOutdoors]

I’ve had pretty good luck with the colts I’ve owned but I know of at least 2 colts here recently that had to be sent back (1 Delta elite and 1 competition series 9mm).

[@mikethomas5412]

@@NolanOutdoors I haven't bought one in 30+ years because of poor quality control and high price. The new CNC guns, I'm sure are of better reliability but so are many others at more reasonable prices. Once more, a great video.

[@yotgguitar]

Yeah... Colt..... such "unreliable" pistols.... It's amazing they even lasted past WW1... LOL

[@kenandkathiehughes3040]

Good to have you back. I have always liked your reviews. You and I have similar tastes...starting with the cz75sp01.

[@jonwilson7960]

Had the same problem with my RO elite and s&b ammo. Polished feed ramp and run better ammo has fixed mine. Good video

[@kenandkathiehughes3040]

Before sending it in to Springfield I had issues about 30-40% of the time. I had shot about 200 rounds through my TRP. Sending it to Springfield was a lot less aggravating and I can use the 18.5# recoil spring. Ken

[@raulherrera6674]

Excellent video. Thank you. I am sure it will be ok. With running time and use, both, the recall spring and the gun will be more reliable.

[@timcole1264]

I have a Delta Elite and fusion 1911 10 mm and I run 28-pound wolf Springs in them and they work Wonderful

[@jpedraza17]

Love your videos man! Great reviews. And yea what you say is true, I picked up a Colt Government 70 Series, Blued finish. Easily the most beautiful piece I’ve ever put hands on. Then 3 malfunctions in 50 rounds 😂

[@Moose47]

Good to see you back on youtube. I’m interested in that same Colt too.

[@youcanthandlethetruth6976]

I suspect it might be the magazine springs. 22lb recoil spring should be fine, but I've noticed that when there's any delay in racking the slide even if your eye doesn't catch it, it will trigger the malfunction, and I noticed it's angle is quite dramatic which made me think that the magazine spring isn't as forceful as it needs to be.

[@rickoshea4546]

I had a similar issue with my TRP Operator 10mm, how I fixed it was breaking the edge of the transition from the feed ramp in to the chamber and polishing it; just softened/smoothed the sharp edge. And a 24# spring for heavier loadings. I also suggest Wilson 47nx magazines.

[@johndelvisco4528]

I use Wilson Combat mags in all my 1911 pistols regardless of caliber. When I buy a new 1911, I order Wilson Combat mags and throw the factory mags in a used ammo box. WC mags feed bullets like throwing fish to a dolphin.

[@anthonysarabia5058]

You limp wristed that last misfeed. Hope you get the issue fixed that's a nice looking pistol. That Delta Elite is gorgeous.

[@ammooth1592]

The RO is fire 🔥 🔥🔥 💥

[@ct2368]

Polish your feed ramp and more importantly polish your chamber. That will help the rounds feed into the chamber better. Concentrate on the top of the chamber because the edge of the round catches on the top. The chamber is just tighter on the Springfield so you need it to be slicked up.

[@josh24wedding]

I have the same Springfield same caliber with the same issues after 700 rounds and three times sending it back to Springfield they sent me a new gun and haven’t had 1 issue with the new one 1000+ rounds through it. Don’t know for sure what the issue was they recut the ramp and repolished it my dad bought a kimber eclipse in 10mm had the same issue and sent it back and they recut and polished it and his is working fine now

[@stevewilson9305]

Excellent video! Certainly helped as I have had concerns with newer Colt products. Only critique- Ammo is plural (please stop with the “ammo’s). Thanks again.

[@thematchman9272]

The failure normally has fed into the chamber but not fully up the breachface under the extractor. Ck extractor tension, examine and polish the hook if correct and breach face is smooth.

[@keithgregory7937]

Good to see you Nolan hope you are doing good 👍

[@NolanOutdoors]

Thanks brother, all is well. Hope everything is going good on your end as well!

[@BERETTA9mmUSA]

10MM is still available in my area. Keith’s Sporting Goods has lots of ammo choice still to pick from. Great 1911 Review on the Colt Delta my man! I had one in 1986..... sadly I sold it. I Need Another Colt Delta in 10MM. We have 3 or 4 10MM Video Reviews coming in Oct-Nov-Dec 2020 Time Frame. Stay Safe Brother! Keep up the Great Work! 🥳😎👍🇺🇸. Beretta Sr.

[@NolanOutdoors]

Thanks brother, I look forward to seeing those videos!

[@TheRealZJE313]

Don't do it.Colts still haven't came back sents they was putting plastic parts on there 1911

[@Watchdog_UFOtestpilot]

“If we don’t have it, you don’t need it.” 😂 Gotta love Keith’s. Picked up my last two Rugers there and am about to try to get an RO Elite 10mm from them soon.

[@jakeshepard9931]

I've been a fan of 10mm for over thirty years now. I used to shoot a Smith & Wesson 1006, (which I wish I still had) now I shoot a Glock 20 Gen 5 and a Springfield Armory Elite Operator.

[@moisesbarrera2188]

Wilson Combat mags and no problems.

[@beretta989]

I run a 22 lbs spring in mine. Runs flawless 😎🇺🇸🍺

[@craigauman4987]

Had the same problems with an original Delta Elite I sent off to Novaks to spice up. Take the extractor out and bevel the bottom edge behind the claw. This helps the round to slide up under the claw for controlled feed. It only takes a small amount of filing. I also use a 24lb recoil spring, for heavy reloads. Best of luck!@

[@grasunmajjurach6026]

VERYGOOD VERYGOOD 10MM FROM THAILAND

[@BigJohnsonGG]

Glad to see ya brother! 🤘🏼 Carry On

[@NolanOutdoors]

Thanks Brother!

[@ammooth1592]

I see I commented several months ago. The R O is tops 💯. The 22 pound spring vs the 18 pound spring u had in their before. The gun shoots alot better now 💯. I feel you are going in the right direction. Shooting different types of ammo thru it ✅. The Sg Sauer, rounds surprised me 💯. I knew the federal would be the most potent of the rounds you shot 💥. Work the spring out some more. It may just need a break in point 🤔

[@wardroland270]

Hey N.O. Great job. Good info. I just watched your video on Kore belts. I’d like to see an update on how they’re holding up. My last gun belt was thick leather and it only lasted eleven years. Don’t want to make that mistake again.

[@travisball7796]

Hey brother, just happened to come across your channel again. I hope all is going well for you and your family.

[@ThecrazyScotsman]

good to see ya brother, polish the feed ramp on the Springfield just a little bit

[@NolanOutdoors]

Thanks Brother, I may have to give that a try.

[@kenandkathiehughes3040]

Hunt Fish Shoot KZbin channel had the same issues with an Elite Operator 10mm. He sent it in to Springfield and they did the same things to his that they did to my TRP. Ken

[@stevemolina9035]

I've said this before, love the ballistics of the 10 "Mighty Mike", but reliability of my early generation "Delta Elite" & "Javalina" long-slide were iff'y at best, bumber. I'm sure todays' 10's have improved reliability & ammo selection, if you can find it. I don't hunt bears or deer or what ever; my .45 ACP 1911 will do what it was designed to do, stop a human aggressor. Choose the right loads for your needs & stay safe.

[@BirdDog-50]

I would make sure it is not magazine related. Getting a failure on initial cartridge load makes me wonder about the magazine.

[@earldelsanto]

Delta elete is best platform for 10 mm. I had one baxk in 1998 never any problem. Better dove tail not so big and mine was blue. Btw i paid 650 brand new.

[@Jarhead6]

hope you are doing well man!

[@chriscahill6897]

Mondays and Fridays guns I've heard before sw460 10mm interesting calibre duel recoil spring Wilson combat good

[@BigJohnsonGG]

Put some small o rings under the screws, like on your Lok Grips.

[@peterchobausch]

great channel. which one would you choose if you can have one only? which one would you feel is more collectable? most would say Colt....but I bought a python last year and it was nothing but headache

[@izzyiz810]

Only thing I can think of is polishing the feed ramp a lil more alongside with the 24lb spring???

[@prebaned]

3 point jam. Look it up. Get rid of that heavy recoil spring, it's going to tear up your lower barrel lug and wear your take down pin holes.

[@tims1415]

That Colt is screaming for a six inch barrel. That S&B is weak ammo, and with the heavier spring I almost knew the gun would have a malfunction.

[@jimyowell850]

You need to check the settings on your microphone. It fades out after you shoot, to the point it is Almost impossible to hear you for 15-20 seconds.

[@NolanOutdoors]

Yea, my apologizes, I noticed that when I had it uploaded. I was using my new iPhone and didn’t realize it did that. I didn’t remember my old phone doing that.

[@jimyowell850]

@@NolanOutdoors Well, there you go. That's the problem. You have an APPLE.... LOL

[@FinFunnel68]

I have a Springfield TRP Operator...Whats the difference between the Springfield RO?

[@af22raptor23503]

If you get a chance to buy some Fiocchi Ammo they make an AWESOME 180gr FMJ and JHP 10mm that is Properly loaded to FULL POWER 10mm Auto it is nice and HOT and Affordable. I like to carry my 10mm Sig P220 Legion or Glock 20 during the winter and I converted one of my Glock 41 45acp to 10mm with a KKM Match barrel because it is the same size as 1911 but with 14 plus 1. I like to use Underwood 135gr Nosler Bonded JHP traveling at 1600 FPS with a muzzle Energy of 768 Ft-Lbs.

[@mikethefarrier]

If I recall didnt colt advise against using full power 10mm in the DE?

[@jimyowell850]

You should check out the Rock Island Armory Pro Match Ultra 10mm with a 6-inch barrel and a double stack 16 round magazine

[@NolanOutdoors]

I was actually just checking out the RIA 16 round 10mm yesterday. I can’t remember if it was 5” or 6” but it had the big flared mag well and all that. It was pretty nice.

[@jimyowell850]

@@NolanOutdoors There's TWO versions with 16 round mags. A 5" and a 6". I have the Pro Match Ultra 10mm with a 6-inch barrel and a double stack 16 round magazine. It's great!

[@lon242]

Good to see you back man (this wasn't old footage was it?) With the ammo situation the way it is and 10mm still on the shevles round here, I might seriously consider picking one up. Sub-magnum power!

[@NolanOutdoors]

Thanks man! This was new footage, I actually just picked up this Delta Elite a couple days ago. There isn’t a ton on the shelves around here but, unlike 9mm 45 etc, there’s still some 10mm floating around. The 10mm round is a great round.

[@jimyowell850]

@@NolanOutdoors If I'm not mistaken, the Delta Elite specifically tells you NOT to use the high power 10 mm loads in it. Which to me sort of makes it an expensive 40. The RIA Pro Match Ultra 10mm supports any and ALL loads.

[@jimyowell850]

@@johnklatt3522 I'm not sure I'm reading your post correctly. You said the Delta Elite could handle "high power" loads, but then state that Underwood REFORMULATED their ammo to "make it safe to use in all firearms, meaning Colts." Isn't that the same thing I said? What am I missing? I'm definately NOT an expert (furthest thing from probably) but that sounds to me like they reduced the power of their loads to accommodate Colts, and other weapons not able to handle the old Norma loads. Again... What am I missing?

[@jimyowell850]

@@johnklatt3522 thanks for the information. I love my RIA 10mm, and have had NO problems so far. I like the fact it has a 6" barrel and a 16 round magazine. As well as a full rail. Add that to the fact that I didn't think I could AFFORD the Delta Elite.... LOL

[@jimyowell850]

@@johnklatt3522 I used to have a Colt 1911, many years ago when NC only allowed open carry. I carried that every day for at least two years. I never once had a negative reaction from police, or anyone else. Times have sure changed! One of my biggest mistakes was letting that go. It was comped out, with a port added to the barrel, and a competition trigger. It was definitely a tack driver...LOL

[@xxxwicked8959]

Hope you make another vid don’t listen to anyone. Everyone think their a gun expert in the KZbin comments

[@0311nwe]

I have the gen 2 delta. Can I use a regular GI guide rod with a 24# single spring? Thanks

[@0311nwe]

@@johnklatt3522 thanks for the info! Are you using a WC shock buffer too?

[@0311nwe]

@@johnklatt3522 Thanks a lot for all the info! It’s hard finding exact improvements for the delta. I have a super short video on my KZbin of my son shooting it. I’ve been using 180gr Ammo inc with good results in a stock configuration. I just was thinking what if parts start taking a crap. Tks again

[@DeltaEchoUSMC]

Issues with Magtech ammo quality are known and it’s not surprising to see with your 10mm. At the start of COVID I personally was in possession of a case of 44Spl, so out of spec that the cylinder wouldn’t turn. Thanks for your video, and welcome back.

[@grahambazzacco946]

Which pistol was better for you

[@michaelsubi]

Hold mag in on bottom when firing it should work

[@markallen1413]

Dude where have you been....???? Welcome👍

[@dickeymoore4264]

Have you shot hollow points out of the colt if so how did it run?

[@NolanOutdoors]

Yea I shot some Sig hollow points through it and it functioned flawless.

[@dickeymoore4264]

@@NolanOutdoors okay Thanks

[@mario90030]

Did you choose you ammo you prefer

[@GARZ_3O5]

Try a stronger MAG spring. Best of luck.

[@markallen1413]

How’s the 762x39 doing???

[@TheRealZJE313]

What colts magazine 50 bucks?

[@earldelsanto]

The 1911 platform is all ways gonna work. Single stack guenius .

[@frayler1056]

I missed you

[@sgtbones1837]

Change the extractor with a upgraded one.

[@ait0317]

Keep the Colt

[@torrynixon9678]

I bought delta elite 10 with beaver tail I haven’t fired yet but I noticed the side thumb safety is frozen it seems like it won’t budge any suggestions guys?

[@jorgesolis9468]

If the hammer is down the safety wont move

[@allihatw]

What happened to your channel bro?

[@earldelsanto]

Ise only colt or wilson compact mags.

[@michaelsubi]

Mag catch on Springfield, take a look

[@sgtbones1837]

The Sig ammo is real full power 10 ammo 1250 fps.

[@jorgesolis9468]

Pretty close to it

[@michaelsubi]

Brazil made is a good thing

[@torrynixon9678]

👍🏽

[@raymondanthony8651]

Love the video but you have to work on the sound going in and out. Thanks.

[@alann816]

My buddy bought your atv on iaa

[@michaelsubi]

Mag might not be seated high enough

[@yotgguitar]

For a gun that you proclaimed might not "work", it sure proved you wrong.... huh? A Colt compared to the springer? Not a fair comparison... the Colt is a much better pistol... Nice shooting btw!!

[@timcasey9531]

The Colt will fail soon enough. You'll know by looking at the locking lug system of the slide and barrel (wear) you'll have to put a 24lb flat wire silicone recoil spring and a stainless steel guide rod with a 25lb mainspring in it. As for the Springfield, try mating the slide to the frame with Flitz. Unbarrelled, no recoil spring, the slide should fall off into your hand when tilted forward. But an 18.5lb recoil spring from the factory (.45 quality) is ridiculous.

[@zachmccall1513]

Mine is a 88 model

[@markmadsen6828]

It's a shame to see American Icon turn to Crap due to "Bean Counters" and lack of vision.. Colt, much like Smith & Wesson have been Spotty for much of my life, I'm 50!, have owned and shot lots of them and Man you said it,,, you never know if you will get a good one... For my money I'll go with a Dan Wesson or take the hit $ and buy a Custom made hand fit 1911.. The initial cost stings a bit but once you shoot a les Baer or a Wilson it's hard to go back.. Sig's early 1911's were pretty darned good for 1,000 $. Now,? Who knows..? Kimber's again, early one's were solid, now?? iffy... Good luck Pal.

[@ThaRealest616]

Your camera went deaf after you shot the Delta

[@tehrtahr]

1911 pistols are designed for ball ammo.. the shape of the head of the round is the problem.. if it's not original ball ammo it creates unreliability.. and all ball ammo is not the same.. .

[@jorgesolis9468]

The feed ramp also has to polish itself through use which is why 300-500 round break ins are required

[@bulldawg2233]

Looks like feed ramp may need little work

[@michaelsubi]

All my colts run better than any of the glocks I've owned Sold all my glocks years ago

[@TheRealZJE313]

I wouldn't waste my money ON a COLT.once they fell off back in the day for using plastic parts on their 1911's they were done. AND SPRINGFIELD just sailed right on by making colt 1911s look like junk and then for the price .

[@anthonyfunderburk7871]

Send it back 🤬🤬🤬🤬

[@af22raptor23503]

I would suggest that you field strip your Springfield and take the barrel out and get some 1000 grit wet/dry sand paper and you use some 93% Alcohol to Polish the barrel and barrel chamber area to take ALL Machine Marks OFF the Barrel and then do the same with the INSIDE of the Slide that will reduce the amount of Friction and give you a Smoother Cycling Slide and Increase the Reliability of your 1911. This is something that I do to ALL my 1911 and to all my Stainless Barrels. Also double check your Barrel Bushing to make sure that you do not have any rough surfaces. Polishing the Barrel and Removing Machine marks is something that is only done by HIGH END 1911 companies like Nighthawk and Wilson Combat but you pay for that service since it is very Labor intensive process but you can do it one afternoon start with 1000, 1500 and if you want to go 2000 grit you will have a Mirror Finish barrel and hood I normally only use 1000 grit inside the SLIDE. Then Clean everything very well and then lube and reassemble and your pistol will function as if it was on ball bearings. I have done this process to my Springfield and Sig 1911s and also to friends Ruger, Colt, and Rock Island that went from jamming every magazine to over 5k fired without a malfunction so far that was over 2 years ago since we did the barrel and slide polishing.

[@chrispritchard5393]

Your volume control is terrible.