New Detailers: Do THIS before WASH | Koch Chemie Super Foam TEST

Car Detailing best Pre-wash testing Koch Chemie SuperFoam pre-soak car care review
Watch PRE-WASH PART 2 here • PRE-WASH: NEW Answers:...
Koch Chemie Super Foam : carzilla.ca/products/koch-che...
=======================================================
🔥 Save 5% on CARZILLA Use Code: "DOGMA" ☞ carzilla.ca/?ref=dogma
🇺🇸 USA 🇨🇦 Canada FREE Shipping [High End Detailing Products]
=======================================================
🧽 SAVE 10% on DIY DETAIL Products 🇺🇸 bit.ly/3WyJ7R6
Use Code ''DOGMA'' to save $$
=======================================================
🧤 SAVE 10% on ARMOUR DETAIL Supplies 🇺🇸 armourdetailsupply.com/?ref=d...
Use Code ''DOGMA'' to Save $$
=======================================================
Favorite Foam Canon : mjjc.com/?ref=342
Favorite microfiber : carzilla.ca/products/the-rag-...
Favorite Soap : carzilla.ca/products/gyeon-q2...
Favorite Iron Remover : carzilla.ca/products/fireball...
Favorite APC : carzilla.ca/products/koch-che...
Favorite Pre-wash : carzilla.ca/products/koch-che...
Favorite Interior Detailer : carzilla.ca/products/gyeon-q-...
Favorite Wash Mitt : carzilla.ca/collections/brand...
Favorite Drying Towel : carzilla.ca/collections/brand...
Favorite Wheel Cleaner : carzilla.ca/products/adams-wh...
Favorite Heavy Compound : carzilla.ca/collections/brand...
Favorite Polish : carzilla.ca/collections/brand...
I have been chasing the pre-washing step for many years now trying to find the ultimate car care product to get my cars the cleanest before touching them in any way, espcially during winter when the roads are a disaster coktail. I always had some sort of ceramic coating and never been afraid to spray cleaners like an APC or pre wash such as carpro lift to get the paint in a acceptable condition before doing my traditional car wash process, so I finally found the perfect foam pre-cleaner for my needs, Koch Chemie Super Foam, the fruity scent is pleasant, it's cleaning power is remarkable, the cost is right, 5 Liters go a long way when only about 60 ml is required at max dilution for a single car wash. Obviously the pressure washer is recommend in any case, but the goal is the same, avoiding micro-scratches on a beautiful paint work finish.
SUBSCRIBE / @detailing_dogma
Thanks for your support
To reach out, inquiries and info 🔎 [e-mail]
This video is not SPONSORED. Some of the products shown have been sent to me free of charge.
If you complete an order using my affiliate links I might receive a small commission that is reinvested in the channel for content producing.

[@Detailing_Dogma]

✅The Detailing Products I use here ☞ 🇨🇦 carzilla.ca/?ref=dogma 🇺🇸 ✅Get 10% OFF DIY Detail products here for USA 🇺🇸 bit.ly/3WyJ7R6 Thanks for supporting this channel and the Detailing Dogma Community 🔥Watch Popular Videos on the channel🔥 : 🔎DIY DETAIL AND YVAN LACROIX DETAIL kzbin.info/www/bejne/f3WziqqBqt-gm7c 💪Q&A video with Yvan Lacroix kzbin.info/www/bejne/f3WziqqBqt-gm7c ☞DAWN Dish Soap Full Testing kzbin.info/www/bejne/imKVZ4lpbM2poLc ☔Best Quick Interior Detailers kzbin.info/www/bejne/ZoqaZ5eIeZZrf6s 🔥Best 1-Step compound Comparison kzbin.info/www/bejne/pIfIZoNrh6mMack

[@ultratec1]

Another great video!

[@Detailing_Dogma]

Thank you my friend appreciate your message

[@johng753]

Great video demonstrating one of the very best pre-wash foaming shampoos. SuperFoam is a “must have” product for any detailer located in an area where it snows in the winter. Will not stain or damage exterior plastics or metal trim. I live near a ski resort and cars come in with brine and snow slush dried on the paint for a month or more. Time to put away the Rinseless Wash and bring out the SuperFoam.

[@Detailing_Dogma]

Couldn't agree more!

[@trifin5772]

Great video, thanks.

[@Detailing_Dogma]

You bet, thanks to you brother

[@randymcnaught5583]

Very good demonstration with and without a pressure washer. C’est Bon!😄

[@Detailing_Dogma]

Glad you liked it! Cheers brother

[@edornelas7248]

Awesome video! Thank you! Will be picking some up!!

[@Detailing_Dogma]

Thank you my man, hope you like it!

[@JoeAndMattsDetailing]

I love it I use it in my business all the time best thing ever👍🏼👍🏼👍🏼👍🏼👍🏼🔥

[@Detailing_Dogma]

Glad we both like it, cheers my friend.

[@alain2409]

Merci beaucoup pour ces instruction

[@Detailing_Dogma]

Tout le plaisir est pour moi, merci Alain pour tes encouragements.

[@user-qn6yt3zx3w]

Wow - super clear and simple instructions. Thank you

[@Detailing_Dogma]

Glad it was helpful! Happy that you liked it. Thanks for watching 🤙

[@seanfoley7231]

Unbelievable 🔥💯

[@Detailing_Dogma]

Thanks brother

[@kawzx777]

Very impressed

[@Detailing_Dogma]

Thank you brother glad you like it.

[@DetailProjects]

Great video ! I wonder how it stacks up to Bilt Hamber Touchless!

[@Detailing_Dogma]

Thank you, that would be a great test indeed! Cheers brother

[@KDR195]

Thank you so much for this! I was looking everywhere for the correct dilution and tested it using 1:50 on my foam cannon and felt underwhelmed. It’s probably because of what you said that it gets diluted more. Also, can you let us know what is the tip color you’re using for your IK foam Sprayer 2? Maybe next time you could also pressure wash 1 panel with product and 1 panel without product to see how easy it is to remove traffic film/dirt. What a great video!

[@Detailing_Dogma]

Great idea, I'll test it out but I already know the answer :) that would make a great test thanks. Ik foamer i'm using the stock tip that that comes installed middle of the road one. Cheers my friend.

[@Saddedude]

Nice to see a detailer working on cars that are actually dirty. Im in northern Alberta and when i wash my vehicles they can look like this before i even get them back home. I gotta say you are really ambitious foaming that down with an ik pro2. You should REALLY check out lafferty foamers. Swing a valve on your pressure washer and you are making shaving cream. Adjustable dilution. Once you have tried one you wonder why detailers all over the world mess around with little pressure washer foamers...

[@Detailing_Dogma]

Ill check lafferty out, I have a MTM foam cannon but for these situation since I wanted really hot water thats the only reason i used a Small IK, i have the air valve on it as well but like I mentioned it's not made for whole vehicles. Cheers and I appreciate you commenting.

[@nicksdragon6929]

Outstanding presentation. The narrative alone could be used to teach a class. Videos of this quality are what I look for. I'm subscribing right now. Thanks again for all the work and preparation you put in making this video.

[@Detailing_Dogma]

Thank you brother, appreciate your kind words, gives me motivation! Cheers

[@kostis6]

Super! Do you use the Koch chieme PW protector wax on your cars? I’m about to test it on my own :) Cheers

[@Detailing_Dogma]

I have not tried it yet, usually I'd use carpro hy2dro2 and Gyeon Wetcoat in this category, cheers brother hope you like PW, let me know how it is for you.

[@MJJCvideo]

@Detailing Dogma Got it,may I know if it's ok for you to review our foam cannon S V3.0?Thanks in advance!☺

[@footbig18]

Great video Frank I actually bought and tried active foam from them, like you I'm in Montreal and I used it as a pre wash and it worked just as well, It smells like Cologne. Keep up the good work👌🏾. What pressure washer are you using by the way?

[@Detailing_Dogma]

Hey man, thanks for letting me know, i'm using the Active 2.0 right now. Thank you

[@footbig18]

@@Detailing_Dogma I was considering getting it but it can't be serviced so now I'm leaning towards either the arblue675 or the kranzle 1622 but they are 1000$ and 1600$ 😮

[@Detailing_Dogma]

dont worry about that, doesn't matter if it cant be serviced for a home owner if you clean couple cars it'll take a decade to break. Be careful who listen to, I'd get a AR630 instead of the kranzle or even better wait for the active 2.3 if you're after a induction pump. Cheers @@footbig18

[@footbig18]

@@Detailing_Dogma I'm a mobile/home detailer as well that's why longevity is a concern with the active and my only worry about the 630 is it needs a dedicated 20amp fuse or even 30 to be safe. The kranzle are nice but expensive and not sure it's worth the extra.

[@stretch8613]

Looks good, although from personal experience I’ve found Bilt Hamber Auto Foam to be the best snow foam pre-wash.

[@Detailing_Dogma]

Thanks for the tip!

[@user-gc1yg6ku9h]

nothing can beat koch chemie. they are on the market since 1968. and most car manufacturers uses their products over others. i think even weaker koch chemie Af is better than bilt hamber. and it smells better than anything. bilt hamber is just hyped crap.

[@benreeve9130]

Bilt hamber touch-less even better

[@stretch8613]

@@benreeve9130 I’ve found Auto Foam is the better cleaner and degreaser using both of them. Even BH state that Auto Foam may be better in certain scenarios, but both fantastic products if you want a snow foam that actually cleans

[@joshuawrinn34]

what year is the m340i? Cheers from Ottawa

[@Detailing_Dogma]

Hey Joshua nice talking to you, it's 2021 m performance edition in san marino blau. Cheers

[@originalguy4535]

Would like to see it with ph neutral snow foam.

[@Detailing_Dogma]

Taking notes here, we can go more in depth for a future video thank you for your feedback

[@kesman9381]

And just the pressure washer at first, would like to know the difference between with and without this product!

[@Detailing_Dogma]

noted my friend, will do that in the next test cheers.@@kesman9381

[@DC-zp2iq]

Wow tres impressionant, too bad il y'ont pas sa dans des plus petit contenent.

[@Detailing_Dogma]

tu peux prendre 1 Litre de green star et le diluer 1:10 ou 1:15, tu pourrais aussi te prendre carpro Lift moins puissant mais fonctionne correct, cheers brother.

[@alexk5157]

Is it safe to use this product on car ones a week. I like to keep my car clean. I don’t have ceramic coating but I do use gyeon wet coat. If I have to I will apply wet coat after every wash.

[@Detailing_Dogma]

I used it almost weekly or bi weekly for more than a year, haven't had any issue. Once diluted with water through the foam cannon the PH goes down quite a bit i'm assuming. It's VDA certified to the highest standard which means it wont damage modern cars material! cheers

[@alexbryan7641]

Would u say this is more effective than green star? Or equal?

[@Detailing_Dogma]

Depends how you dilute green star but at 1:10 it's more aggressive than SF but remember it'll slowly get to your wax and sealant too, plus GS doesnt foam like SF does. I believe in using dedicated product for specific task. Cheers.

[@grimWNY]

GS doesn't foam, but MSN does. Either way, foam is superficial, and not anymore effective for cleaning.

[@RichardsWorld]

Hmm.. that's a lot of minerals on the car. Perhaps try an acidic car prewash, or 2 or 3 PH wash system.

[@Detailing_Dogma]

I agree, but it get like this on a weekly basis.

[@rocky7gd]

es tu à montréal?

[@Detailing_Dogma]

oui monsieur, cheers.

[@JohnD15317]

Thank you for the vid. How does KC super foam compare with Carpro Lift?

[@Detailing_Dogma]

Good question! Thanks to you too John, I'm out of CARPRO Lift at the moment to make a fair comparison side by side but I haven't seen this type of cleaning with it. Lift is more geared towards ceramic coated cars and the coating integrity, Superfoam is more potent IMO, pair it with hot water it's the best I've tried, next step would be an APC or something degreaser type. Talk soon.

[@JohnD15317]

@@Detailing_Dogma thank you!

[@depthcharge6215]

pH 12? Why is mine pH 9.5 lol. Isnt that AF version?

[@Detailing_Dogma]

Hey man the product used in this video is Superfoam (PH12), Active foam(PH9.5) or AF is a different soap from KCX. Superfoam is a dedicated pre-wash foam not to be used in bucket. AF is more versatile product, can be used for hand washing or pre-wash but not as effective to remove dirt compared to SF. Hope that helps cheers.

[@depthcharge6215]

@@Detailing_Dogma yea was wonder... the container looked similar to AF.

[@vladkonstantinov2995]

Actually everyone knows, that the Best pre-wash - Stjarnagloss / BiltHamber / Shiny Garage

[@Detailing_Dogma]

Thanks for the feedback

[@iangeorge6409]

Everyone?

[@chipdiamond2628]

If you have a ceramic coated car you should not need to do this.

[@Detailing_Dogma]

Thanks for the feedback, understand your concern but actually when diluted in the foam cannon it's not that harsh on a coating, those are just myths in the detailing world unfortunately. it's not like spraying an APC on it. You can always re apply toppers and recoat periodically, cars usually need a polish as well. Cheers

[@SuperchargedLlama]

I can see Detailing Dogma has already replied, but I'll echo it. All vehicles need a proper pre-wash product to remove as much dirt and contaminants as possible prior to the contact wash. In the UK this is common practice btw, it's a weird difference between the US and Europe actually, don't really know where its come from.

[@Detailing_Dogma]

Thanks for chiming it, love your work btw, cheers brother.@@SuperchargedLlama

[@SuperchargedLlama]

@@Detailing_Dogma and the same to you too darling! I think our channels are very similar in terms of perspective on products and use cases, but yours looks so much better 😂

[@Detailing_Dogma]

Thank you for your kind word, I have a long way to go in front of me! Gotta keep grinding. @@SuperchargedLlama

[@BrianW1612]

Looking at the SDS, I'll stick with my non caustic, non sulfuric acid, non-cancer causing Bilt Hamber Autofoam.

[@Detailing_Dogma]

Thanks for the feedback