“We’ve got the tools I’m going to use to build it” Sam Pilgrim: “Sorry I don’t speak Italian”
@ryanleffler35322 жыл бұрын
Yet pilgrim has the pipe cutter
@reyrey29716 жыл бұрын
Hey when you do videos like these you should include a tiny bit of riding at the end or "testing" during the video even if it's just rolling down the street and jumping over curbs or something idk i just think it'll add a bit of relief to see how it rides. Same with the videos of upgrading the bikes! Thanks!
@joshlansbury5056 жыл бұрын
Use the plumber tool to cut the top of the forks that’s what Sam pilgrim does
@murraydavey6 жыл бұрын
Josh Lansbury I think he would know that
@joshlansbury5056 жыл бұрын
Murray Davey well he didn’t did he
@adamnallamner83336 жыл бұрын
Maybe he doesn't have the right size one for the forks, the one he used on the bars is too small for steerer tube
@atlantic_fishing_pursuits6 жыл бұрын
Adamn Allamner exactly what I was gonna say the one he has is too small he needs to get a bigger one for the steerer and the seatpost!!
@antoinedoinell6 жыл бұрын
he forgot to sand it...
@screamerproduction3976 жыл бұрын
"I like short things" - Girlfriend laugh :-D :-D
@jacklabarg5 жыл бұрын
Screamer PRODUCTION what time was that at
@xavierpaquin5635 жыл бұрын
Jack LaBarge C’est à 5:50
@fjaubrey27785 жыл бұрын
i’m dying ahahahah
@cavi77685 жыл бұрын
;~~~~D
@handyhippie65485 жыл бұрын
i remember catching hell from a girlfriend for rebuilding a vdub engine for a sand rail on the kitchen table. it was the middle of winter, a foot of snow on the ground and i had no garage. you gotta do what you gotta do.
@bryn_appleton6 жыл бұрын
Can you do a pov run at crankworks?
@doctaj.2571 Жыл бұрын
That’s awesome. I actually really enjoy the color scheme. Normal blue/orange schemes look generic. This is fire.
@georgemarsh82586 жыл бұрын
Thank you so much for this video, been looking for a good DJ build vid to help me build my own. Learning a lot about bike parts. Keep up the vids!
@gnrl06 жыл бұрын
4:08 Anyone thinking of Sam Pilgrim? 😄
@javiertan96466 жыл бұрын
General nah Sam’s hammer is much bigger lmao
@Vein-NDC6 жыл бұрын
No... Yes haha
6 жыл бұрын
At least Matt is using a hammer instead of a oversized sledge head :P
@alasdairbachmtb2735 жыл бұрын
General yup
@jbobmusic31254 жыл бұрын
Yup
@gazplow27686 жыл бұрын
We used to use our missus' hairspray on grips. Rock solid when it dries. Nice video and lush bike. Have fun in Whistler.
@davidg.67346 жыл бұрын
Hey Matt, your definitely one of the most charismatic and pleasant mountainbikers to watch on KZbin! Great work! Is there a reason why you're running your stem / cockpit that high with all these spacers below? Cheers Mate!
@TimFromWales6 жыл бұрын
Nice one, love to see a bike build... And NO Matt YOU are an absolute legend!
@antoinedoinell6 жыл бұрын
metal shavings on the kitchen floor...in socks...made me wince a little but you do you Matty.
@samallen90176 жыл бұрын
Dude! I weirdly did this to put a new frame on my bike just for fun and a photo. Your OCD impresses me. Cheers for the great posts. Peace.
@scottpostlethwaite45826 жыл бұрын
Do you have your cranks that stiff for park riding as well? I’ve tried it in the past and it just makes everything pedal pressure based such as fakies and tyre taps so much harder!
@ashpaglaro34216 жыл бұрын
so stoked to race Crankworx!! this year see you there Matt.
@CLIFF-DJ6 жыл бұрын
Sooooo much time for this! This pleases my OCD massively. Love the level of detail and interest into the bikes you ride! Respect!
@chrisbrandt27936 жыл бұрын
Dang knee issues are real I'm on my 3rd month of recovery from a partial knee replacement looking into a hardtail so I can get it moving again. And back on my trail and Dh bikes
@atlantic_fishing_pursuits6 жыл бұрын
chris Brandt I had a fuckered knee aswell so I know the pain but I think a hardtail or offroading is a bad idea I stayed of downhill for siz months but I rode my road bike a lot cause it strenghtens it!!
@swiggity-swooner6 жыл бұрын
I was pretty surprised, because during the video you said something about 1hr 3 min. And in the end it took 1 hr and 4 min. Pretty damn accurate
@neekuinknight6 жыл бұрын
this is the first time i saw someone cut their seatpost. it feels so weird
@Delta-Berging6 жыл бұрын
That,s a nice build. I ride bmx on the skatepark. but now i.m looking for a dirtjumper cuz then i can do both. Do you recomend to build it yourself or just buy complete. I do not have alot of money i.m working as hard as i can for a new bike. Thanks
@theverystormycloud40115 жыл бұрын
Corne Vis buy complete then upgrade, although most dirt jumpers are sold as frames
@beechy02776 жыл бұрын
That plumbers tool Is also good for cutting down forks
@Dude-Smellmyhelmet6 жыл бұрын
big beechy Not that particular tool, but a regular pipe cutter will fit.
@Abiddin106 жыл бұрын
What happens if you cross threaded your bb? Do you need to replace the whole bike frame or do something to the bb to fix it?
@FloridaTrailrider6 жыл бұрын
Nice build Matt. I'm building up a Nukeproof now. Getting some inspiration. Cheers from USA
@KieronymousBoof6 жыл бұрын
This is the most brutal bike build I've ever witnessed!
@Fincher1236 жыл бұрын
First i need to say: Great Work! A driver that know how his own Bike is Working is very Important. Than the Other one: Never use Copper Paste on Aluminium! is is causing Corrosion. Instead of this i use Ceramic Paste. Then at last: what Type of Colorful Bolts are u using, that you like to replace?
@alicesimpson91736 жыл бұрын
Great vid! Keep it up, I love this stuff you do.
@jaspen26116 жыл бұрын
The Alcatraz is my dream frame! Such a sick build
@seanhornchek64406 жыл бұрын
what is the use of an oval chainring on a dj especially if you are wanting more friction in the cranks with a tube inserted.
@SportFlow5 жыл бұрын
Very nice bike and components. BTW, which ratchet wrench are u using?? thks
@brainclerk44315 жыл бұрын
its a definite MATT thing ! i have one and the layout on the kitchen floor is a definite tell tale sign . we also have a TREK bike room but the hygienic kitchen has always taken 1st choice . Matt what do you think about chicksands ? 1-10 ?
@ssdnjm6 жыл бұрын
I like the look of the bike dude!
@zakwoodman99216 жыл бұрын
What would you say would be a good jump bike to start on, I wanna buy one but not sure what is the best to go for.
@lhmtb64935 жыл бұрын
If you live in the UK, calibre Astronaut, mafia blackjack d
@memememe8434 жыл бұрын
Really Nice kitchen too.
@RajnishFreeride6 жыл бұрын
Need video about oval chainring setup performance review. Please soon
@ColeT_435 жыл бұрын
Search up absoluteblack on the internet
@noahsieber50856 жыл бұрын
Nice build i d love to know how much it would cost in parts?🤔
@satisfying29956 жыл бұрын
Matt are you running the maxxis dth kevlar tires with tubeless? Or they are with wire
@BlazeTechMedia6 жыл бұрын
Super rad bro! good luck for crankworx
@jordynmoody93545 жыл бұрын
Hey man what chain do run to be able to run your rear wheel slammed hard up and not have any slack with out a chain tensioner?
@Buoyant_Thoughts5 жыл бұрын
What a Gorgeous bike!
@highlandhillwalkin6 жыл бұрын
Great video.Surely having an oval ring on there will make it harder to pedal unless you had a derelluier? , take the rubber ring off you don't need it and save a few grams ;)
@S11XRK5 жыл бұрын
What would u recommend for a beginner to get for a dirt jumper
@jbobmusic31254 жыл бұрын
GT labomba or Marin Alcatraz
@Ligster1236 жыл бұрын
Check out cti knee braces for your knee Matt. Shit hot always comfy too. Get a pipe cutter for the fork steerer!
@motivatedbyhaters856 жыл бұрын
New bike day for Matt is like new undie day for me...or at least it comes around nearly as frequently lol.
@alimantado3735 жыл бұрын
Love that frame I ... didnt know Marin do jump bikes. why do BMX/jump bikes always come with horizontal dropouts though its a pain in the ass to get chain tension correct
@ridingwiththereids6 жыл бұрын
"plumber tool" aka A Pipe Cutter, can be used for cutting down the handlebars, steer tube, and seat post. use a medium grit sandpaper (not the driveway asphalt) around the cut you make to knock down any burs or rough spots and things will turn out perfect. Good luck getting that kind of finished cut using a hacksaw and asphalt *cough cough* sam pilgram *cough*
@Dude-Smellmyhelmet6 жыл бұрын
Riding With The Reid's That's a different type of pipe cutter. It won't fit on steered tubes. Just sayin
@seanmadilly6136 жыл бұрын
You would have made if you didn’t explain all of the parts. Great video as always. Keep it up!
@grahameshepherd24634 жыл бұрын
sick new DJ!!!!!!
@grub9186 жыл бұрын
You should have 100k in no time good video
@igorwasiuk78535 жыл бұрын
What is it that youre putting on your parts, is it like blue??
@benjaminbarker31173 жыл бұрын
Matt long shot but have you got a djd sprocket I could buy I'm really wanting to get out on the bike but nowhere has any in stock until end of April
@reiniskesners79246 жыл бұрын
You should try a gel called ``Dolobene`` on your knee. I had my knee the same size as you and it really helped to get the swelling off. But that`s just my advice and expirience so you do you.
@oliverhampshire30814 жыл бұрын
4:22 the Netflix sound
@SirCluless6 жыл бұрын
Any reason you run your rear on the right? Or just how you've always done it :P
@trashpanda34685 жыл бұрын
Where do you get all your bolts from
@zxGHOSTr6 жыл бұрын
Any recommendations for a beginner budget jump bike?
@ethanrevitch5 жыл бұрын
Matt you need a park tool saw guide for the fork.
@lhmtb64935 жыл бұрын
Park Tool aren't the only company to manufacture those
@rosskinsley25056 жыл бұрын
Any idea when the Marin Alcatraz frame will be back in stock to buy? :)
@AlonsitisDuff6 жыл бұрын
Did u used a ceramic knife against that seat post? ....
@Dude-Smellmyhelmet6 жыл бұрын
Alonsitis Duff and....?
@AlonsitisDuff6 жыл бұрын
Trail Work Ceramic knives are very fragile and can become dull and even break with small hits
@SaucedLB6 жыл бұрын
I need to cut my steer tube down on my bmx forks, was wondering if I could use that plumbers tool u used on ur bars to do my forks, I don’t wanna do it with a saw and fuck it up and make it all rough. Thinking a pipe cutter or that thing u used on ur bars. Any thoughts?
6 жыл бұрын
Nice trip!
@dawnkangas29682 жыл бұрын
Absolutely awesome 😎
@anthonysullivan78715 жыл бұрын
How many spacers did you use underneath your stem?
@benjinichol92756 жыл бұрын
“i’m super lucky to have all these sponsors” more like rly good
@joshpayne32185 жыл бұрын
8:43 that's what she said
@russ022819905 жыл бұрын
Always seat post on first, then clamp seat tube instead on clamping top tube.
@sammatchett60146 жыл бұрын
Honestly I would hate knowing that little things have been rushed on my brand new bike.
@GerdragonHD16 жыл бұрын
Sam Matchett Yeah... right?
@jameswilman14905 жыл бұрын
Looking to buy a dirt jump frame on a budget of £100 new or used. Any recommendations?
@wiktortomczyk316 жыл бұрын
kitchen = garage❤️
@cohensylvester51914 жыл бұрын
What front and rear wheel do you use on this bike??
@harrygascoyne9606 жыл бұрын
Yo just wondering, what headset do you run Matt?
@stuartmount16885 жыл бұрын
This video is the best!
@doublemgaming43566 жыл бұрын
Better yet, what is it exactly?
@nico.dirtbike58165 жыл бұрын
Where did you get the ti bolts from ? Please help me 😣
@MattJones5 жыл бұрын
Nico.Dirtbike a website called Ti Springs
@aaronashmole36235 жыл бұрын
I love this sorta thing
@drewthompson85936 жыл бұрын
Can you try a front flip of of the drop starting the big jumps
@maikxd51464 жыл бұрын
Hi, I have a dirt jump bike, but I don't know how much it should weigh.
@tomcarter80486 жыл бұрын
Love the Alcatraz! Lucky I’ve got one myself from my dad from Paligap. Rides amazingly, good bike to have fun on. Keep up the good work!
@stellaprs6 жыл бұрын
Looks like you have been having bike building lessons from Sam Pilgrim ;)
@khemligertwood95726 жыл бұрын
Can you buy a full Marin bike or just the frame
@lhmtb64935 жыл бұрын
You can buy the marin Alkatraz fully built for $1000
@backyardmtb80264 жыл бұрын
cut the seat post and the fork with the pipe cuter because it is a lot quicker
@Jb_outdooradventures6 жыл бұрын
Super nice bike you deserve a sub
@genzfishing97006 жыл бұрын
How do I know what bottom bracket will fit on my dirt jumper
@lemo_manda60766 жыл бұрын
Love these videos!
@jikkityjek13336 жыл бұрын
What will you do with your old bike
@mrrage12175 жыл бұрын
ordering the 2019 in buzzing cant wait for it to come in the next couple of weeks when I have the money ready your a massive inspiration want to be just as good as you one day
@corowyeet15716 жыл бұрын
When will we be able to buy the Alcatraz?
@QuinnErno6 жыл бұрын
Dedication 🙌🏽
@gregorytoth40156 жыл бұрын
best thumbnail i have ever seen in my entire life GG Mr Jones GG brethren
@benhayward6316 жыл бұрын
I like this style building the buke
@pstrong695 жыл бұрын
how many jumps these shock absorbers have
@dirtaction61836 жыл бұрын
Which brand are those Titanium bolts?
@dingles75705 жыл бұрын
What forks are they? And were can i get them?
@onsight28226 жыл бұрын
Yo Man how's it going after whistler ?
@samlong69196 жыл бұрын
use iso for the grips works amazingly :)
@foonigan35715 жыл бұрын
odi all day
@jasonlight42516 жыл бұрын
Hammer to install a crown race? Matt say it ain't so?
@Dude-Smellmyhelmet6 жыл бұрын
Jason Light Are you serious? A hammer tapping on a race or starnut is nothing compared to the force put through while landing big stuff. The bike is Gonna get beat up anyways... and that will be that. They will give him another in a few months... he probably already has more frames and forks ready to go
@jasonlight42516 жыл бұрын
Trail Work , yes i am serious. >$1000 fork and all that is needed is a
@ranimartinez13755 жыл бұрын
Matt, it actually took you 2 hours due to 1 hour with your Setting up work of art. Thanks for the video
@danielmtb20996 жыл бұрын
The bike is cool, But the grips Are Looking terribel took Black one in it.🤘🏻🚲
@rogerserafin6 жыл бұрын
I want those forks. Are those forks made for 27.5 inch wheels ? There's a huge gab when he mounted the 26" wheel on it. Also, that's a sick scale he used. Anybody know who makes those....Thanks.
@davidomalley61045 жыл бұрын
Spin doctor makes those stands
@caidenwhitfield92536 жыл бұрын
It there any point striping my bike and rebuilding it and make it lush ?