New DIY DJ Console 2.0 - By DJ Southern Comfort

[@titolove7677]

Cool video thanks

[@aljaymanalo]

the best one that i have seen so far genius..

[@DJ_Southern_Comfort]

Much appreciated, amigo...

[@djdnyce3989]

It's a nice console. Honestly I think I'm gonna give it a shot. But you will definitely get credit for the design. Looks good man!

[@bobbyj836]

I need one of these booths. Great craftsmanship.

[@SteveBricknell40312]

Very nice work! I'm sorry alot of people will take advantage of your design. Hopefully they will give thanks and shout outs to you for all of the "pro tips" you have saved alot of time and money for some

[@DJ_Southern_Comfort]

Yeah, some folks have no honor... but as long as I can help some, I'm ok with that. Thanks

[@michelemartinez4976]

I see alot of booths but yours is definitely the best!!. Wish I can just buy it.😊

[@DJ_Southern_Comfort]

I'm contemplating building another one to action on FB.

[@DJG.Music_]

Really nice build! That t-slot is a game changer!

[@kkmusic607]

Looks great, man!

[@warrenbleakley3255]

Great job one of the better home built consoles I’ve seen keep up the good work.

[@DJ_Southern_Comfort]

Much appreciated, amigo...

[@Klmprodmarroneric]

Beau Travail! Bravo

[@djnelspin684]

One of the best DIY consoles I’ve seen. Great job and thanks for sharing!

[@DJ_Southern_Comfort]

Much appreciated 🙏

[@James.KingHTX]

Really nice console man!! I’m sure people would pay good money if you produced more of them!!

[@DJ_Southern_Comfort]

@@James.KingHTX I'm working on a few truly portable versions of it... coming soon🙂

[@James.KingHTX]

@@DJ_Southern_Comfort oh wow can’t wait to see the videos!!! I’m in Houston so not too far from your area!!

[@djdannybhtx]

So clean!! Great job buddy!

[@djrroy1]

Hi firstly i love your videos, without doubt the most insightful ones online which is going a long way to help me build my stand, and love that you have shared the links to all the parts you have used. Question the tripod laptop stand, you mentioned this is modified. Could you share how, and what other parts you used? Did you still use the Speaker Mount Adapter with M20 Threading, Black? Any guidance is appreciated, thanks again for the great video!!

[@DJ_Southern_Comfort]

Thanks for watching, I'll put something together and share soon. I just had eye surgery, so it might be a few days.

[@djrroy1]

@@DJ_Southern_Comfort no problem at all. I hope you make a full recovery, thanks for the quick reply.

[@DJ_Southern_Comfort]

@@djrroy1 I basically cut the top area of the tripod, about 3 inches below the knob. I then cut the Speaker pole to my desired length. Fortunate enough the tripod poles fits almost perfectly inside the speaker pole. I slid the laptop pole portion into the speaker pole and fastened with a couple of self-tapping black metal screws. You can use black tape to thicken the laptop pole to better fit (Snug) inside the speaker pole. I hope this is clear as mud. Laptop tray/tripod... www.amazon.com/gp/product/B0CD239NT1/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&th=1 11” Speaker Pole - www.amazon.com/gp/product/B0BXSB6ZPH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Speaker pole baseplate - www.amazon.com/gp/product/B00FKY86V6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

[@djrroy1]

@@DJ_Southern_Comfort amazing thanks mate!

[@Av-pu2bo]

Superb craftsmanship 👍🏿👊🏿🙏🏿

[@DJ2Legit007]

That's a great design! I love how you used aluminum to make it more lightweight! Great job!!

[@DJ_Southern_Comfort]

Thank you very much!

[@geraldfer]

I like this design...I have the DDJ-1000SRT... I'm mentally doing LED lights on yours... playing with ideas and bright white paint and or TV mount for upper tier racks... Thanks again for this informative video 🙂

[@DJ_Southern_Comfort]

You're very welcome...

[@duanedavis7538]

Extremely well done console!, Love the design and your attention to detail. I’ve built a few consoles. Yours gave me some great ideas for my next build. Thanks again

[@DJ_Southern_Comfort]

I'm happy to hear that... there is nothing better than using diy equipment and getting accolades for how professional it looks.

[@TheHoovman81]

I love your stuff! You should be selling this.

[@DJ_Southern_Comfort]

Thanks amigo...

[@williamtheconjurer]

Great Job. Thanks for sharing.

[@bizzybdj]

best diy ive seen. love the led. i clicked the link but doesnt work. any info on the transluscent roll. id like to buy some for a project

[@DJ_Southern_Comfort]

Try this one.. www.speedwaymotors.com/Colored-Plastic-HDPE-Sheet-10-Ft-Rolled-1-8-Inch-Thick,1557.html?

[@bizzybdj]

@@DJ_Southern_Comfort thanks boss. what part of texas you from. im in louisiana

[@DJ_Southern_Comfort]

@@bizzybdj imin the north Ft. HOOD area... South of Waco.

[@bizzybdj]

@@DJ_Southern_Comfort cool. Thouggt u might be closer. Im in lake charles. Anyway keep up the good work

[@FSP.Entertainment]

nice build!

[@midtowndjs2889]

First thank you for posting your ideas. I did attempt to build this booth. It's a similar design being that it uses the same plastic roll that goes into those grooves and around the booth. It is not the easiest thing to put together. That plastic roll is not PVC its HDPE and almost impossible to get into a tight radius. You'll definitely need clamps, a custom jig to help push the plastic into the grooves, time and patience. You might even need a bottle of "southern comfort" 😆I've been at it for days trying to get that plastic roll in 🥵💀Wish I could post some pics.

[@DJ_Southern_Comfort]

@@midtowndjs2889 lol, Southern Comfort Fixes everything 😁

[@JS-wi9mw]

NEXT LEVEL!! Amazing stuff!

[@DJ_Southern_Comfort]

Thank you

[@jasonrokmgmt]

Please send me plans for the build. You did a great job. Much respect!

[@DJDjayVarela]

Great Work Sir

[@DJ_Southern_Comfort]

Thanks

[@tylergolden9]

Dope! Huge upgrade. Enjoyed watching. Only recommendation that immediately came to mind is buy some shorter length right angle xlrs to remove cable tension

[@DJ_Southern_Comfort]

Thanks

[@chaseflores2145]

Excellent work, I’ve been wanting to use extruded aluminum for a long time. Great design, very well thought out. DJ furniture is grossly overpriced. DIY is the only way to go

[@DJ_Southern_Comfort]

Thank you... I agree its extremely overpriced. But I've always preferred to diy my stuff. It feels good.

[@ItsWesSmithYo]

Putting in that DIY sweat #strongworkyo

[@djfach]

I like it alot

[@MrTbanks2834]

Dammm that’s nice will make and sell them 😊

[@DJ_Southern_Comfort]

Thanks... I'm working on a mobile friendly version. Should have something soon.

[@DJ8Boombastic]

Awesome 👏🏾👏🏾 what are the measurements for the top console please? What’s the height between the two plywood please? Did you have to trim the plastic to get it this height? Thank I bro!

[@DJ_Southern_Comfort]

It's a 24 x 48 inch top x 4" thick. The translucent material was cut to fit the 4" thick center piece with a mitter saw. Thanks

[@shawntchiika262]

Great job on this one! How heavy is this one compared to the other one? If I had a trailer I’d want something like this 😂

[@DJ_Southern_Comfort]

This one is about 30 lbs... without all the gear... 75lbs fully loaded.

[@wurlitzersk2541]

Great work. How heavy is the upper part without the base?

[@DJ_Southern_Comfort]

With controller, 25lds

[@terranceburke5343]

@dj_southern_comfort, you killing me man!!! This is your niche. You were made to make these consoles. You can bake so much money, more then you DJ for, because a lot of business will come your way. You want to know why? Consoles like you are making, cost way over $2,000 to $2,400, and you can undercut the greed that’s out there. If you get 10 orders a week, and you sell them for $600 to $700, you don’t have to DJ no more. I’m telling you sir, the people will come. I hope you reconsider.

[@DJ_Southern_Comfort]

I truly appreciate you, brother... I've gotten a ton of requests. I'll just say this, I have designed and built a one of completely portable and affordable console... I'm in the process of getting a patent. Stay tooned for a video coming soon. Thank you

[@terranceburke5343]

@@DJ_Southern_Comfort, yes sir, your welcome. I’ll be waiting.

[@lukepritchard5713]

Love this, and i hope you don't mind me copying it! Your link to the Translucent PVC Roll is broken. Could you please tell me which one you used? thank you!

[@hmejia30]

You should try to sell your creation I like it , great job

[@DJ_Southern_Comfort]

I'm designing a dumb down version of it, you know, not everyone has a trailer. My goal is for it to be collapsible and portable.

[@hmejia30]

@@DJ_Southern_Comfort i would like to buy one of those from you

[@DJ_Southern_Comfort]

@hmejia30 I will let you know. Thank you

[@CarlosRivera-b8d]

Nice work, damn you move that thing, what's the weight after completion?

[@omeshwarsingh4375]

Great job. Round over bit was set a little too deep leaving on a ridge on top but not super noticeable.

[@DJ_Southern_Comfort]

I did that on purpose... I like that look.

[@djc-lowdamixinwizard7728]

Good work. Love it. I never use this type of mixer before "the Rolls MIX MATE 3 Mixers". That is just like a regular external mixer that runs from your controller to your speakers?

[@DJ_Southern_Comfort]

Correct, I run my controller to Ch1, my mics to mic ch 1&2, my Bluetooth receiver to ch3, and I have ch 4 open in case I need to plug something else in.

[@DJ_Southern_Comfort]

Oh, and I also run my main pc to ch3

[@djc-lowdamixinwizard7728]

@@DJ_Southern_Comfort thank you! I appreciate it.

[@djc-lowdamixinwizard7728]

@@DJ_Southern_Comfort also the Ectrusions, how many you used for the base?

[@DJ_Southern_Comfort]

If you're referring to the 80/20 brakets. You'll need 8 for the bottom and 4 for the top if your sliding panels in between the 80/20 bar channels. ​@@djc-lowdamixinwizard7728

[@wkhentertainment-vd1qc]

That is awesome! Do you make them to sell? White? I'm looking at some now.

[@DJ_Southern_Comfort]

There is a white raptor liner... I don't make them for selling yet😊

[@TheMarcello310]

DEAREST FRIEND I WRITE FROM ITALY. CONGRATULATIONS REALLY. CAN I ASK YOU THE WIDTH AND HEIGHT OF THE ALUMINUM? THANK YOU

[@DjUncleRocks.]

I made the first one I just don't know how to send you a picture I have a video of it don't worry my friend you get all the credit for this build. Thank you. P.S. tell how to send or put a picture up my controller Rev 7

[@DJ_Southern_Comfort]

If you have Facebook, I recommend you join DIY DJ Booths... it's free, and you can showcase your built.

[@Mrprich]

How did you modify the tripod stand to fit the speaker pole? What did you cut the speaker pole with?

[@DJ_Southern_Comfort]

I cut it with a grinder and metal cutting wheel. I slid the one side into the other. I used some electrical tape and rapt it around the inner pole till it fit sung. I attached the with a 1/4 flat top self tapping screw.

[@BretGashDJBFG]

Outstanding work.anship. how many hours you think UT took you to get everything finished?

[@DJ_Southern_Comfort]

I took my time with this one and also spent a few days waiting for shipments. But It could be done in a couple of days, given that you have all the materials on hand.

[@imaniinternational7853]

Nice clean job! What did you use for your laptop stands?

[@DJ_Southern_Comfort]

I found a surface speaker pole mount on Amazon and a 16" screw in speaker pole. I cut it down to my preferred height and fabricated/ adapted the tray of a laptop trypod.

[@DjJoeyPinaDJ]

Wow very nice work. The other company should be paying you something for taking your idea I do know which company that is. (MC)

[@DJ_Southern_Comfort]

@@DjJoeyPinaDJ I know right! Lol Thanks

[@DjJoeyPinaDJ]

I been looking for white bed liner. Like the black spray you’re using Have you come across any recommendations for Similar spray texture in white?

[@DJ_Southern_Comfort]

@DjJoeyPinaDJ Raptor liner is all I use... RAPTOR White Bedliner 2K Aerosol a.co/d/8OKJrBR

[@DjJoeyPinaDJ]

@@DJ_Southern_Comfort thank you so much. I’m redoing my booth so I’ll get 2 cans

[@DJ_Southern_Comfort]

@DjJoeyPinaDJ That's what I recommend 👌

[@manuelcardenas3441]

You should sell it and make some money 👍👍

[@DJ_Southern_Comfort]

I forgot one link... this is for the Aluminium drawers. starcase.com/product/rack-mount-drawers/

[@carloscancino7215]

WOULD YOU SELL YOUR FIRST CONSOLE?

[@DJ_Southern_Comfort]

Howdy, unfortunately, I already sold it to... facebook.com/share/p/KVDjn76hbuTPRBtX/?mibextid=oFDknk

[@djoscarmix]

hello buddy, i wrote you on instagram for some questions, thanks in advance

[@DJ_Southern_Comfort]

I haven’t got it... hit me up here. DJ Southern Comfort: facebook.com/profile.php?id=100089339231712&mibextid=ZbWKwL