New Duckbill Spoiler for the 2022 GR86

[@brenthardy9455]

I love watching your vids! So clear, concise and informative and none of the boring rhetoric on many other vids. I loved the emotions and psyching up you went through to put drill to plastic. I'd be exactly the same! Don't change Kev!

[@KevinVo]

Truly appreciate the love and support! You're the reason why I continue to make videos!!

[@zp-1107]

A lot of people are just sticking these on and not drilling. Well done for being brave!

[@KevinVo]

We ain't no b*#%*!!!!! 😜

[@jbm0866]

That may be fine for badges and other type trim, but not something actually part of the airflow. Those who simply use the tape will likely lose their dcukbill someday, just hope I'm not one following behind🙈

[@milktothefifthpower]

Haha, there's no reason to not drill. Even if you miss drill, it's gonna be covered anyways lol, so I say go for it

[@CanyonDanCars]

Awaiting delivery of a BRZ TS. Just received my spoiler in the mail. Definitely going to use your video for install. Instructions are in Japanese. Thanks a million.

[@jordantan7399]

Thanks for the video man! Helped me a lot with installing mine (especially the part about nuts falling into the trunk!)

[@nodrogkam]

seeing it in the review or the silhouette when driving around sunrise/sunset makes it feel just that much more special.

[@KevinVo]

Agreed!

[@benisjammin626]

Just installed a spoiler on my BRZ. Looks great. I appreciate the guide!

[@cdsprech]

Another great walkthrough and the car looks awesome!

[@KevinVo]

Thank you 👍

[@Fastphil007]

You sir, are criminally undersubscribed. I'm new-ish to your channel, but loving it so far. Well done!

[@KevinVo]

Appreciate the kind words and support! More to come!

[@pedrorojas5498]

DUUUUUUDE THANK YOUUU... ordered the part and installed my duckbill. easy peasy and looks incredible. Love your channel.

[@drivera121]

What brand did you get your spoiler from? Was it IKON Motorsports?

[@NapalmPineapple]

I like how they made it a separate piece vs the 1st gen. Because if you screw up you could just buy that new plastic piece. I did this on my 1st gen and it’s literally drilling the metal trunk lid

[@KevinVo]

I feel you on that. I drilled into my FRS trunk to mount my wing and it was terrifying haha

[@jodyuo22]

Man,watched like 10 of your videos right after i found you today lol So interesting to watch them and learn You got a new sub!!

[@KevinVo]

Glad to hear you're enjoying them! Thanks for the support!

[@K03sport]

I made the same noises when installing the Perrin trunk handle (curse you riv-nuts). Curious the duckbill could not have been designed to replace the entire trunk lip. Sure, more material, but the mounting points would already be there.

[@Ryu.86]

The duckbill spoiler completes the look of the gr86~

[@FujiboHeavy]

Nice work mang!!! Looking forward to following the build!

[@KevinVo]

Thanks for the support!

[@FujiboHeavy]

@@KevinVo I’m not a fan of red, and only certain cars can pull it off. This thing, pulls it off well 🤟🏼

[@jpngion]

Love the duckbill! Watching you drill those holes made me anxious too! You did well sir! 😂 And yes, Red is the colour for a GR86! Looks wicked!

[@KevinVo]

Thanks for watching! Appreciate the support!

[@Wolfmandell]

Way to go….looks Fantastic!

[@ianbell9166]

Just installed on my 86 great video thanks

[@SHiFTDI3S3L]

The first cut is always the deepest.

[@KevinVo]

Just gotta get past that point and then it's all good!

[@Kev_N_1976]

I have a carbon fiber duck lip coming tomorrow. I'm just going to use the tape. I had one for my S2000 and only used tape never had an issue with it and after 11 years it is still holding strong. I love your DIY video however. To see the Process if I need to drill is wonderful - thumbs up!!

[@retromonkee3741]

Can’t wait to do this on my GR86.

[@udeshhhhhh]

Could you please leave a link to the spoiler? I'm from Australia and our base or premium GR86s don't come with duckbill spoilers and we can't order them from Toyota...looks like I have to source one from overseas if I want a genuine Toyota spoiler. Also how much was this?

[@knappRC]

YES! Looks so good.

[@KevinVo]

Hell yeah, so gooooood!!!

[@Vasquez19781]

Great vid! My Red MT 2023 Premium comes in any day now and I want the duckbill black!! Wonder how much of a hassle it will be to have someone paint it or wrap it black for me.

[@IlsignorFranz]

Just bought for my 86! Now I have to drill 😖

[@gregmcgowan4726]

I just stuck mine on 2 years ago with 3m tape , still there.

[@JetFalco]

Is that Sunday Slider I peep in the background? If you guys aren't doing anything with it, lemme know. I'm in the dsm area.

[@enekoprins]

GR86 base model comming and I want the duckbill!! Don't know if I will be so brave though 😱

[@LaserGuidedCat]

I wonder why they didn't the make the premium duckbill a whole new single piece that you replace, especially since it seems like the way the ducktail (and skirts) was designed to allow you to change the look by having them come right off, whole

[@KevinVo]

Probably because it'd have to be two larger molds instead of just the one large mold and one smaller one. Usually comes down to cost.

[@loveever89]

The proper way and anti theft proof!!!

[@KevinVo]

Absolutely! Nobody is taking my spoiler!

[@guycarmeli6845]

Thanks for the video Could you please provide a link to the spoiler?

[@jimmywacieni6426]

bro how can i make my back seats look better on gr 86.......dope content bythaway

[@JhysenTheAsian]

Me, who owns a 17 BRZ: Hmm interesting

[@H1ghMess]

Yo Kevin awesome video! Imma bout to buy my Gr86 where did you order this spoiler? Thanx in advance 💪

[@Device442]

My duckbill arrives today

[@Pwndaz]

Any chance you guys will start offering this part in the Trueno Blue / Sapphire Blue color? Got my BRZ otw and want this as my first mod

[@KevinVo]

We're working on it!

[@kgthegreatone943]

What's next wheels?

[@KevinVo]

We shall see!! 😉

[@_c_a_b_1997]

You’re lucky tbh in the UK we only get the top trim GR86 yet it doesn’t come with the duckbill

[@KevinVo]

Wow. They're holding out on you guys!

[@benrhysjenkins]

Eh? You can order the duckbill as an extra in the UK.

[@_c_a_b_1997]

@@benrhysjenkins I didn’t notice that on their website so I’m assuming it’s a like a parts department situation but it still sucks, cause the Americans get it in the car as standard in top trim, no doubt we have to pay and have to ask around about one being supplied, fitted and painted. Tbf though it doesn’t even matter cause all GR86 were sold out in the UK and to be one 2nd hand is the same story as the GR Yaris, middle aged men buying them and then deciding they don’t want it before it arrives so selling for more than new. GR Yaris is supposed to be just under £34 and I’ve seen people sell them for £35k-£44k brand new or even with up to 10,000 miles. Same with GR86 supposed to be just under £30k but seen them going for £32k-£36k

[@SoraBaxton]

Any chance you can see what wings would be compatible with ducktail 86s and do an install vid of your favorite one?

[@KevinVo]

In all honesty, I'm trying to keep this low key so it likely won't have a big wing on it. If we get any in I can try them out though.

[@3NOM4NOM]

Looks so much cleaner with the duckbill. Are you planning to track your GR86 along with you FRS?

[@JustinJS]

Looks great! Wish I could get it WRB :(

[@sethi100]

Yes. Looks sharp. Nicely done. What is the part # and cost?

[@Boondoggle6969]

It's linked in the description

[@sethi100]

My bad. Did not see the down pointing button. Thx.

[@TpdriverGaming]

My biggest issue is I have Neptune blue. And no one has a painted ducking bill for it.

[@noeromero6124]

I think it would look much better with the Nur Spec wing.

[@shaheryarmalik2406]

Yo bro @kevin yo I can't seem to get the electrical grommets out of there a switch holding them in place?

[@KevinVo]

Message me a photo on Instagram. @thekevinvo

[@fntraitor]

now imagine drilling on a granite countertop to install a RO water filter system.

[@russellbumak]

What camera and lens you used bro?

[@KevinVo]

I use a Sony A7III with a Sigma 24mm most of the time. I'll be doing a video covering my equipment soon.

[@russellbumak]

@@KevinVo thanks bro Keep 🔥

[@Carlos.Rivera]

Kevin, poke SARD wing on it to see how it looks👀

[@KevinVo]

Maybe one day!

[@rhodycars6058]

Will you guys get one in Neptune?

[@DYLAN1234]

great video, maybe dumb question but does this fit the brz too?

[@KevinVo]

Yes it fits the BRZ too!!!

[@elliotkrolikowski1345]

Ive bought the same thing but havent installed it yet because i do not know if the tape will stick to me ceramic coated car, anyone know if it will?

[@danielboisvert139]

Perfect.

[@KevinVo]

It really is!

[@midnightquest9758]

Wish it came in silver . I’ve only seen red , black /white

[@KevinVo]

We're working on it!

[@isiaihharris4893]

@@KevinVo good to hear! I got a grey BRZ premium so I def want to install one on mine

[@Crow_Engine]

After seeing the black spoiler on the orange 2023 special edition model, I'd been hoping something like this would be possible without too much hassle. Will definitely be looking at something like this for my base model too! Now I wonder if I should also do black on my red GR86 🤔

[@KevinVo]

I don't think you can go wrong either way!

[@Vasquez19781]

My Red MT 2023 Premium comes in any day now and I want the duckbill black too!! Wonder how much of a hassle it will be to have someone change it black for me.

[@daniellocke9534]

now if i could just get one!

[@FosterJohnsonMedia]

It doesn’t look naked anymore!!

[@KevinVo]

No more naked and afraid GR86

[@chrisz5z]

Unfortunately it's about impossible to find one in silver

[@Kronk82]

Is the Oem and the TRD duckbill identical? Ty

[@KevinVo]

There are two different oem ones. There is the BRZ and the TRD ones that are both different.

[@Kronk82]

@@KevinVo I mean, duckbill on premium gr86 USA stock is different from TRD trunk spoiler? If yes, what’s differences? Here from Italy and here premium comes without the duckbill. Thank you 🙏

[@KevinVo]

@Kronk82 oh no that's the same ones!

[@GRTrueno]

Why did you drill it instead of using double-sided tape??? 🤔🤔

[@KevinVo]

Because that's how it was meant to be mounted and is the most secure.

[@GRTrueno]

@@KevinVo does that mean it’ll fly off with doeinle sided tape and I don’t get why it isn’t pre drilled

[@KevinVo]

@@GRTrueno no it isn't likely to just fly off, but if you do it this way it's impossible for that to occur. If the holes were pre-drilled. Every base model would have holes in the trunks.

[@Live.drones]

Why aren't the holes pre drilled?

[@KevinVo]

The duckbill only comes on the premium GR86 model. On the base model, you're left with just the trunk lip. If the holes were predrilled then you'd have holes in your trunk.

[@ChinmayH]

Will this be available in WR Blue ?

[@KevinVo]

Not likely as it'd have to be a custom painted product. It comes in an unpainted version for you to paint match.

[@ChinmayH]

@@KevinVo Ok thanks for responding.

[@wuhsabi]

Crackes me up when people say the GR86 is better than the BRZ, its the same f***ing car.

[@joesgotmore]

I would have got the black duckbill. But that is just me.

[@KevinVo]

Black looks good too! I saw it on the orange special edition that they released and it's nice!

[@lugardorobles5407]

what size rims do i need for my premium gr86?

[@KevinVo]

What are you looking to do with the car? Do you want a 17 or 18?

[@lugardorobles5407]

@@KevinVo whats better 17 or 18 or whats the stock size?

[@jodyuo22]

@@lugardorobles5407 17 for base 18 for the premium

[@lugardorobles5407]

@@jodyuo22 ahh thanks

[@dylanvu945]

xD Never noticed your license plate says "Troi Oi"! Fucking Hilarious. Sweet looking cars man.

[@KevinVo]

Best mod ever! hahaha thank you!

[@pyrojm1916]

nice

[@andrewxu2618]

will there be WR blue color in the future? Really want to get one for my wr blue brz! LOL

[@KevinVo]

Not likely since it's not an oem option for the brz ☹️ you would need to go with the unpainted and then have it paint matched.

[@sebastiano6431]

Does it come in Neptune blue?

[@KevinVo]

Not currently, but we're working on it!

[@Drifthaze]

I want to put a black one on a red car.

[@timmyvechett]

I thought you hated spoilers

[@KevinVo]

When did I say that???

[@cosmic_waffle3200]

Is there a way you can just slap it on without drilling the original trunk? Or is it better to drill it?

[@buntafujiwara3586]

Duck 'tail'.

[@tomaspesica.]

Why not carbon?

[@KevinVo]

Carbon exterior components on a "daily" car are too loud for me. I just want something sleek. That being said I would love a cf Varis hood haha

[@TimurIskhodzhanov]

Probably easier (and cheaper!) to find someone with a GR86 Premium of the same color who does NOT want the duckbill, and swap the spoiler. Unless you have a BRZ in WRB.

[@KevinVo]

There's a total of like 3 of these cars in my area haha I don't want to find a needle in a haystack. It would be convenient though!

[@jamesvang4392]

Love it!

[@KevinVo]

Thanks! Me too! Now we just need some bigger stuff.

[@arcelivez]

Is it me who thinks you're crazy? With The duckbill it looks so much worse than without it...

[@KevinVo]

You're crazy! haha

[@holeshot26]

it says subaru on everything because its a brz built by subaru, with tiny differences made for toyota's preferences. if you took off the toyota badges & look at the back of them, they also say subaru made in japan on them!

[@KevinVo]

I'm very much aware it's built by Subaru. I was just pointing it out because it's funny 😋

[@Menace_sti]

But the gr86 looks much more aggressive vs the brz front end!