*NEW FAST™ MICROPRISM and FAST™ FTC PA | UNITY Tactical

The FAST™ MicroPrism positions Primary Arms® MicroPrism™ optics at the established FAST™ height of 2.26" to the optical centerline from the rail. It is also compatible with other optics of industry standard mini-prism footprint, though heights may vary depending on the optic.
The FAST™ FTC PA magnifier mount employs UNITY’s FTC (flip-to-center) technology - already found in the FAST™ FTC OMNI and FAST™ FTC 30MM - specifically to bring the Primary Arms MicroMagnifier to the 2.26” FAST™ height.
Both new FAST™ mounts are available in black or FDE, and mount directly to an M1913 rail. The FAST™ MicroPrism comes standard with a two cross bolt rail clamp but is compatible for retrofit with a FAST™ QD Lever. The FAST™ FTC PA comes standard with a FAST™ QD Lever. #unitytactical #unityfastmount #fastmount #fasmicroprism #fastftc #fliptocenter #giraffegang #primaryarms #opticmount #226 #microprism #magnifiermount
#shorts

[@FireCampSecurity]

They be showing love to PA. ❤

[@SourPatchPuss]

Unity = Innovation at insane prices PSA =Innovation at a fair price

[@daithi1966]

I want one, but it costs more than the magnifier it would be holding. I think I'll wait for Primary Arms to release something of their own.

[@cksdesertrat489]

Have been wanting this so badly… and here it is! Thanks

[@joshuabruce9920]

I wish someone would get a review up already. I want to see a sight picture using this magnifier and mount and a variety of red dots (t2,exps,xps,etc). I want to see if while it's in the lower position if it blocks off any of the Red Dot window. I seen another video where it seems the AimPoint version seems to work better than the EOTech version as far as getting out of the way enough to get full window. The eotech version blocks a tiny bit of the bottom of the window and I'm not sure i could get past that

[@turdferguson2863]

I have a T1 does that count

[@MichaelSchwab-nk4rm]

Than you'll be happy to know Unitys magnifier is coming out in the next few months to address this very issue. Check it out

[@bearwoolsey9949]

Any plans on the Holosun magnifier?

[@GunningGhoul]

Do the Unity Micro FAST mounts have the same marks now with the cage number near the picatinny?

[@CrimtideStreams]

$200 for a god damn mount that probably cost $10 to make.

[@totenfurwotan4478]

You must have never bought any serious tooling in your life huh?

[@virginiaslimdsd]

Adm is $100. Unity does alot of innovating though

[@SourPatchPuss]

@@totenfurwotan4478Yea because you only have to pay for all the tooling with the sale of one mount right? Jk jk I know not what I speak of.

[@JamesMcCoy84]

I can’t imagine the COGS in making a mount that retails for $250, and that’s before I buy the new mount for my 1x microprism that came with a whole series of mounts that don’t even add up to 2.26” to match the height of the FAST ATC mount 😢

[@turdferguson2863]

Already copped it!

[@peekrd]

Thoughts!???

[@JayyBird93]

How do you like it? Just placed my order

[@turdferguson2863]

@@JayyBird93 love it!

[@rivercityracer3683]

Excellent stuff ya'll 🎉

[@Booper2021]

As of right now this set up will run you $900.98 before tax! 🙃

[@RedDawnReadiness]

Hahaha when your mount is 3x the value of the optic you may want to reconsider your setup Haha 😂

[@Booper2021]

@@RedDawnReadiness Exactly!!

[@the.odd.society]

Rather run a LPVO at that price

[@MF-Rell]

​@the.odd.society I'm with you when you're right. 😂

[@MattWaller04]

Can you magnify a 1X prism?

[@MagpulFTW]

does this orient the ranging reticle in the right way? might be a stupid question

[@Doug11B10]

No

[@paulbrower1812]

Do you really think people with a primary arms budget are going to spend unity money?

[@cschaeff]

Will this work with an ACOG?

[@dang879]

Mini cog.

[@lordofkeebs8424]

100% is possible to mount, lol. Was using the mounts that came with my pa x1 for my acog as a temp riser. Height will be different, sadly.

[@narutobroken]

When the mount costs more than the optic

[@markfour9866]

Finally happened😮… has anyone tried the x6 in this combo?

[@Mebum]

If you want to use the 6x but the Unity Omni… called PA today about it

[@madcowracing88]

Have to use the omni for the six but I tried PA's new 6x with their micro 1x prism and couldn't get them to focus enough to work when magnified and 1x to also be clear when magnifier is down. Possibly gonna try the 3x but probably stick to magnifying red dots. Sucks cause red dots are blurry for me. Basically trying to magnify the prism goes through two diopters and they don't play well together. You have to sacrifice 1x clarity for any clarity or function under magnification and being 1x is 80% of my shooting the trade off is not worth it.

[@dansgarage4572]

No one’s astigmatism is so bad they can’t use a red dot, and when you magnify a red dot it fixes your astigmatism 😂

[@mashergaming9984]

The most inaccurate comment

[@dansgarage4572]

@@mashergaming9984 if you can’t use a red dot you’re a legitimate danger to society behind the wheel.

[@noThing-wd6py]

You don't know what are you talking about aren't you?

[@dansgarage4572]

@@noThing-wd6py I know more than you

[@tm1182]

@@dansgarage4572 Cant use, and prefer not to use are very different things. im tired of star shaped dots

[@0228mustang]

My understanding is magnifiers do not work properly with prism optics...surprised Unity would match them up in this video.

[@HuckleBerry476]

They work fine

[@jackdangers3292]

a 1x will do fine.

[@CrimtideStreams]

You don't know how PA optics work then..

[@0228mustang]

@@CrimtideStreams Thanks, Friend-O

[@Rainmaker0007]

Mount cost more than the optic. 😒

[@liev2766]

Does your brand have anything to do with Circassians? I am a Circassian (Kabardian) living in the historical homeland of the Adygs.

[@Fluoride_556]

why though? those optics aren't good for nods lol

[@llnaanll]

nv level seem to work just fine