New Front Splitter and Rods from WISH!

Watch the original install video of WISH front splitter here:
• the ST gets Front, Sid...
Link for front splitter from wish
www.wish.com/product/5d0ef347...
Link for splitter rods from wish
www.wish.com/product/599fef13...

[@16minimonster16]

I ordered that exact front splitter and I have been looking and looking to see how to install it on my car and finally I see it plus you walked through the splitter install! This video got my thumbs up because it was exactly what I was looking for! Looks amazing can’t wait to do mine here in the coming days!

[@contactpq]

I bought an inexpensive EBAY chin spoiler for my 2008 Benz E350 with the AMG Sport Package...I watched a lot of install videos and finally came across yours ... your process made the most sense to me so I went with it your way... the installation was super easy and measuring everything before drilling holes had me lined up just perfect...thanks for sharing your work methods with us

[@hectorc3353]

Looks good man keep it up i got the same splitter for my challenger, this is my second time ordering it, currently waiting for it.

[@asifahmad2551]

Yesterday, i saw ur tapping screw installation video, and went down with hardware and same splitter, but unfortunately while jacking i had a sprain on my back nd now m on bed watching ur nut nd bolt system that too i had in my pocket, what a coincidence, God too wanted me too wait for a day.... 😃

[@dizzykillteam]

Thanks for the update, a must have

[@slosubies4845]

Thanks for the update. I was debating whether to go the easy route and use just self-tapping screws, or do it right with fender washers and bolts with self-locking nuts. I don't think I'll be doing any 125mph runs in my Impreza Sport, but it looks like it's worth the extra effort to get it on there securely as possible.

[@cre8tivegarage157]

Keep the great vibes coming, we watching from Las Vegas

[@yetticuda]

Great video. About to install this one myself. Was given to me with no hardware so should be fun.

[@dirtylollistorewonderpark5482]

Thanks alot for the Vid bro, I was contemplating getting the mounting Rods, but now I see how important they are in keeping the front lip in place.🙏🏽

[@JordanMoree]

💯 %

[@LordRahl74]

It's best to always use 3m adhesive as well.

[@anvoyage89]

lol, it's amazing that I watched the 1st video then come this one :)). But, this shows the importance of securing the front lip while at high speed.! Great video, thanks mate

[@DriveWayRay]

Going to follow this as a gospel guide you nailed it. Mine turned up today for my mk2 focus ST but I’m gonna wait and order some splitter rods 👍👍👍👍👍👍

[@franchise-pj6ow]

Crazy bro I lost mine at the same speed. I'm so glad it didn't cause any damage to the under carriage ! Well besides mangling one of my exhaust tips no other damage occured.

[@kennethrollerson4898]

Can’t wait for mine to come in!!

[@garydeandeery]

Ha ha Iv seen a few come off now I fitted mine few years ago in between the splash guard with the tie rods. Done few track days and been fine so far. I did cut a slot into the guard to help with pressure

[@salvatorespalato3503]

Sweeeeet video bro and sweet whip too

[@4099cal]

It looks great 👍...thanks gave me an idea 💡 on how to put it on thank you

[@lsjionredlinesupercharged2049]

Looks Great 👍

[@seandon5649]

Where did you get those headlights

[@jcruz0143]

Looks very nice, me I would put the rods more to the side \ /, it would look more aggressive.

[@drakolassboyy4966]

It looks perfect 👌

[@JordanMoree]

thanks I was pretty stoked on it

[@carloslewis8448]

Use double sided tape to assist your bolts or screws it help with keeping it fastened and firm

[@Pkdimmock]

Can you explain a little more please? Do you mean to use tape on parts that are not fixed to assist and attach the whole splitter?

[@TalencioJamaican]

7:17 your dance move is FLAWLESS

[@dannyboyp88]

Hi. You think those will look nice on a yukon truck?

[@ej5376]

Lost mine at 166 in model 3 performance, but I can’t use mounts. I’ve had for fiesta St’s. One which had 350bhp, the most fun car ever created, a smaller version of the focus ST! 😍😍 Pretty stuck tbh haha. On my route home it’s one of those roads where you can go flat out without many cars for like 18 miles and there’s a barrier separating the opposite direction, so my only real danger is a dear, a blow out or a cop 😂

[@hanielbomb]

Damn knew it. I watched and we talked on you previously video. That’s man.

[@garydeandeery]

What do you think. Skirts be on soon

[@CarPEDiemas]

Thanks I think I need to add some real screws and washers as well on mine also then I hade 145mph and it still there but maybe better to secure it up :-D

[@GarrettBoyd1030]

Just ordered mine! Definitely won’t be hitting 125 MPH in my car but it’s mainly for looks and so I can add some rods as well! Wondering if this will 100% fit on my 2002 Mitsubishi Eclipse 👀👀

[@JordanMoree]

It should. It’s 3 pieces so it’s universal. Just measure measure and measure

[@afteroffice_yt]

👍

[@unwrapthrills]

Woulda like to see exactly how you actually connect the top section of the rods. Did you drill holes in the car?

[@JordanMoree]

Yeah I know. It took a long time measuring out to make sure they were even and I just didn’t film it. But yes drilled a hole for each on the bumper

[@blitzed3744]

Did it come off yet?? Looking to get one but seen your first one come off so kinda scared to get this one.

[@JordanMoree]

Nope. It’s solid now👍🏼

[@DreamBicycles]

The second time. Nice.

[@GarrettBoyd1030]

Where did you purchase the front splitter rods from?

[@JordanMoree]

Ordered those from wish also. Cheap but they work.

[@bimmerheadzept915]

great videos...lost mine at 80mph...i suggest liquid nails or a good plastic caulking, and big washers.

[@robertdippolito199]

I don’t trust this splitter to stay on at high speeds, I’m returning it

[@bimmerheadzept915]

I've had it on for a year now..no problems, i just used a lot of screws and washers.

[@Ris3nPropheT]

Looks great. I bought these same splitter for my MK3 RS. But I don't like the idea of drilling through my front bumper to install those rods. I'll have to use L shape brackets to hold it in place from behind the bumber unto the top metal piece.

[@zurivazquez8277]

I believe your supposed to put the middle piece over the side pieces

[@toddcalrow4124]

try adding some 3m tape dude

[@darrylpolite8722]

Does it come with the spacers?

[@JordanMoree]

I ordered two of them and they both came with spacers however other people have commented theirs did not.

[@omarpelaes8838]

Any update about your front splitter ? Still on place ?.... I lost mine when I was driving about 80 miles

[@JordanMoree]

It’s solid now. Haven’t gotten back up to 125. It’s few and far between that go fast. I just like building. But with the bolts and rods in place it has no wiggle at all. But definitely take the time and throw the self tappers away that it comes with. Someone else mentioned using riv nuts which would probably make a cleaner install and add the same security.

[@omarpelaes8838]

@@JordanMoree what size are your rods ? And how much did you pay for them ?

[@JordanMoree]

Omar Pelaez here’s the link to buy them. I went with the larger size 150mm. www.wish.com/product/599fef13e7dd6c0a50e3a0e0?share=mobileweb

[@thekingishere1831]

The pound for pound

[@user-qs2xs3us2x]

I thought the side pieces always went BENEATH the center piece.

[@Parahlyzd]

link for the splitter?

[@JordanMoree]

Parah www.wish.com/product/5d0ef34733a5827087f9e651?share=mobileweb

[@bruhmoment335]

from 5:37-5:53 i noticed that your zip-ties for the license plate were not the same! i know you like your symmetry brother!

[@bobholland5436]

What size screws did you use for mounting this? And how has it held up since reinstalling?

[@JordanMoree]

Bob Holland I really do not remember. I just went to home depot and bought some I felt were big enough and drilled the holes. Has held up to 140 mph so far. I honestly don’t try to go too fast anymore. Just had a little boy and he needs his daddy😉. Good luck with the install. Also the rods aren’t everyone’s style but they def work to hold it in place also!

[@chriztoph3rhammer750]

How come you never explain the measurements

[@taximan7912]

You should have used double-sided tape too

[@ALFA_813]

People always ask why i don’t buy a real carbon splitter and I just say this is my third one lol

[@EscapePlanSkateboarding]

How is it holding up this time around??

[@JordanMoree]

No issues after this.

[@EscapePlanSkateboarding]

@MOREE GARAGE Awesome, I'm going to pick one up 👌

[@erwinlevasier]

Looking good, were did you order the rods?

[@JordanMoree]

They were cheap rods on wish. You can get them on Amazon too

[@dham99]

i have the Rally Innovations aluminum 3pc front (and rears)..uses heavy grade bolts..no flex or issues. That plastic looks like it can get pretty flexible at speed! Looks good though..nice job! What part of TX? Im in Converse (SA) ^_^

[@JordanMoree]

Dallas

[@dham99]

@@JordanMoree right on... much better car scene up there than here in San Antonio.

[@syihanyasan6220]

How about we pour epoxy in the lining in side to make it EXTRA hard so it's serve it's purpose.......

[@affordablelonnie8867]

Hey @MoreeGarage I think we should link up man I'm Dallas . I made some Mods on my 2017 Chevrolet Sonic LT I think it will a great video. I ordered the same 3pc front splitter in my flew off when I was driving down highway I was mad but quickly ordered another one but I just got a 2pc front splitter

[@JordanMoree]

Affordable Lonnie you have Facebook? I’ll look you up. I’m always down to meet local car guys.

[@affordablelonnie8867]

Lonnie Jackson My facebook

[@cameeiwebb935]

I did the same steps on your other video &&- unfortunately my sh* came off on the freeway 😂😂 i installed the second one, i. Didnt use splitter rods, i did however use rivet gun &&- added bolts &&- nut 💪💪 now i can fly without worrying my bootleg lipkit 😂😂

[@robertdippolito199]

Why not take away the rubber spacers. I took them out to sit more flush

[@JordanMoree]

The rubber spacers are meant to keep the splitter straight and inline. The focus bumper is not flat on the bottom so without them you would be bending the plastic upward in the middle if they weren’t there.

[@fishingstix610]

Lmao you ain't going 125 on the back roads you hit a curb or something there's rash marks on the oem bumper 😅😂😂

[@NagasakkiSI]

80mph equals about 300lbs of downforce...so 125mph... If these are functional splitters, the rods have to be bolted to chassis not the bumper. Just daily driving it may hold up, but the splitter flying off is not the problem... that 300-500lb of downforce will rip your whole bumper off instead.

[@poppinfresh5261]

My car doesn’t even like to go 70 so I am perfectly fine

[@AlexVorasane]

Yo, you're in Texas, want to do my lexus for some content? Lol

[@JordanMoree]

I’ve got an 8 month old now. I barely have the time for my own car anymore😢

[@AlexVorasane]

@@JordanMoree I put mine on 2 days ago, went on the highway and half of it flew off and broke. Lol whats the best way to secure these things?

[@AlexVorasane]

@@JordanMoree has these ones flown off yet? Lol

[@JordanMoree]

@@AlexVorasane youve gotta use bolts and nuts….or rivnuts…or something other than the self tapping screws. The rods help tremendously too!

[@lawmanlawreaper]

Lucky you did not take anything from under the car out or another car driver, very lucky

[@JordanMoree]

H LaWMaN H I have a special spot where no one is. I’m almost 34. I don’t endanger those around me. Can’t say I’ve always been that way but you live and learn. But yes very lucky something didn’t get taken out under the car.

[@lawmanlawreaper]

@@JordanMoree Nice Man stay safe

[@thenoobletlego]

lmao at 125MPH? Sureeeee.

[@MrKerl05]

Omg thx ...! I Send this shit back. Before i install this crap.

[@MartinR-zz4li]

I wanted one but pretty sure now I’ll lose one at 140🤣

[@JordanMoree]

Since installing the nuts bolts and rods I’ve had it over 140 with no issues

[@hungrybeastvending3590]

Shit bro 125, relax