New Fusion M2 40 | Epilog Laser | CO2, Fiber, or Dual Source Laser Machine

With its larger size, the Fusion M2 40 allows our customers to tackle even larger jobs - both CO2 and fiber applications - in one system. Now, regardless of material - wood, bare metal, acrylic or other engineered plastics - our users have a large-scale, single system that will process all these materials, within the same job.
To receive your free Epilog laser engraved samples and a brochure visit: www.epiloglase...
For domestic US pricing and to setup a demonstration contact your local distributor:
www.epiloglase....
For international system pricing and to setup a demonstration contact your local distributor:
www.epiloglase....
Epilog Laser
16371 Table Mountain Parkway · Golden, CO 80403 · USA
[e-mail] · [phone] · toll free [phone]
All Rights Reserved. © Epilog Laser 2016.

[@Sanyhte]

Hi work at PSE Archery in Tucson, Az. I use epilog laser fusion m2. It is a Good machine, Thank you!

[@sakiloki4618]

I stopped looking since they don't even list their pricing.

[@RoboCNCnl]

Seems like an amazing machine..

[@glafira21ify]

Can you guys do a rubber stamp tutorial

[@robertabrock2612]

I have a new machine that works for all lens except the 2” one we use the most. We have replaced the lens twice and it still doesn’t work, only had it a month. Any ideas why or what to look for?

[@benjaminsieber1589]

Hi Roberta - which machine do you have and where are you located?

[@sandeeppande9122]

can use on metal & other as a wood ,glass, rubber etc

[@benjaminsieber1589]

That is correct the dual source laser system includes both a co2 laser for wood, glass, rubber, and more, and a fiber laser for metal, ceramics, and engineered plastics.

[@chang1206]

hello, just curious which video camera you used to film your video. it just looks so bright and vivid.

[@benjaminsieber1589]

+Candy Chang - We shoot our videos in-house with a Sony NXCAM and a Sony A77 (DSLR) camera. When it comes to great, bright, and vivid videos it's more about lighting than the camera. In some cases the Sony DSLR camera achieves a brighter sharper shot with the lens we use, so we've purposed it for most of our closeups, but the Sony DSLR doesn't even come close to the NXCAM when it comes to features for video producers.

[@chang1206]

+Benjamin Sieber you must have a team to do shooting, lighting and Post-production. especially, when you are not sending the video to outsourcing. that is impress. thank you for sharing your work.

[@benjaminsieber1589]

+Candy Chang - Hi Candy, I wish we had a team. It's just me doing it all right now. I've been learning so much so fast, so thank you for the comment. Video work is a very satisfying media when it comes to producing content. You're able to say so much in such a short amount of time.

[@chang1206]

+Benjamin Sieber wow! it's an amazing. you know. Making a video is so many work when you do it alone. when the result comes great, all the hard work is worth it. good job. Benjamin.

[@gabrielgren5905]

Hi how much?

[@lakrohbro]

Rough price on this thing?

[@RickEverett]

This....

[@epiloglaser]

The Fusion 40 M2, depending on the wattage of laser tube, ranges from $25k to $44k in the U.S. Prices outside the United States will vary. We suggest filling out our information request for if you would like to receive specific pricing information - www.epiloglaser.com/request-information/request-information.htm

[@paramveerdhoot6415]

Epilog Laser this is very helpful. Thank you! Amazing machine.

[@musiconrafa223]

price ?

[@benjaminsieber1589]

The cost of our various laser machines is determined by speed (stepper vs. servo motors), engraving table size, laser wattage (ranging from 30 watts to 120 watts), and standard features. The laser machines range from $7,995 to around $66,500 (U.S. pricing only). If you'd like help determining which laser is right for your application or receive pricing information, call us at [phone], or visit our website www.epiloglaser.com.

[@mtechhindi23]

india price ???? m2 40

[@epiloglaser]

Hello - please fill out this form (email only if you like) and we'll email you the information you are looking for, regarding the Fusion 40 M2 pricing. www.epiloglaser.com/request-information/request-information.htm

[@scottydntno]

Probably like $30k and upwards

[@Theundisputedtruth]

@@scottydntno over priced if so , but your probably rite