New Gyeon Wax Proves Wax is NOT Dead! Application and Water Test with Awesome Results!

In this video we will take a look at Gyeon Wax. This is a new wax that can be applied as a stand alone or on top of a ceramic coating. This is a fluorine wax and the hydrophobics are like what you would see from a ceramic coating.
If you liked this video hit that subscribe button and ring the bell so you won't miss my future videos.
Don't forget to check out my Amazon store for many detailing products and items that I recommend. Here is the link: www.amazon.com...

[@404notfound.....]

Incredible hydrophobics right there!! Super cool to watch the drying effect as you're rinsing the panel. 👍 great video Brian, enjoy Florida.

[@FABAutomotiveDetailing]

Thanks man!

[@IntervalePC]

Wax IMO gives a deeper shine🌟 You could definitely see it on the test panel. I could never get tired of seeing a panel get dried off with water🚿 Great video Brian 🍕

[@FABAutomotiveDetailing]

Yes it made the test panel glossier for sure. Hydroponic’s are addictive when testing them. Thank you

[@FABAutomotiveDetailing]

@@EireFirst2024 Me too!

[@МаксМарченко-и2ф]

На сколько месяцев хватает эффект ?

[@TheCarDetailingChannel]

That wax is insanely hydrophobic. Some of the best I’ve seen from a wax

[@FABAutomotiveDetailing]

Couldn’t agree more!

[@michaelcampbell01985]

Stuff looks amazing. When you stood the door up you could really see the difference awesome video brother.

[@FABAutomotiveDetailing]

It is good stuff. Hydrophobic’s are awesome with this wax. Thanks man

[@BetterThanNewDetailing]

I know you guys have fun playing with different products. The #1 nemesis of any wax is sun exposure. Waxes start to melt at 160 degrees which is achievable in direct sunlight. So…the wax will be more hydrophobic in the short term, but the sealant will last longer. The only paste wax I’ll use is Soft99 Fusso…and it’s not really a wax it’s a Teflon coating. Cool video.

[@audieconrad8995]

Fusso = bucket of chemicals.

[@BetterThanNewDetailing]

@@audieconrad8995 all detailing products are chemicals. This Gyeon Wax contains fluorine….you might want to Google that😂. It’s a very hazardous chemical and you should avoid all contact with skin.

[@1stfrompuertorico568]

@@BetterThanNewDetailing yes, I always check for chemical contents but one of the things to do is always use hand gloves and possibly long sleeved shirts. I still haven't tried this one but I do that with Fusso. One of the things also with Fusso is it doesn't have a nice scent for me but it is good on paint.🤷🏾‍♂️😄

[@BetterThanNewDetailing]

@@1stfrompuertorico568 you’re right and yes Fusso has a very strong chemical smell. However for me that’s a good thing, it means there’s no unnecessary perfumes in it to clog up the main PTFE(Teflon) chemical that provides that far superior coating to any wax.

[@FABAutomotiveDetailing]

Yep heat is a waxes enemy for sure. I ha e never tried Fussocoat but have seen some good videos on it.

[@millerdetailing4176]

Oh ya been waiting for you to try this , doesn’t last long but it’s easy to put on and easy to take off. Hydrophobics are great and can be put on top of coatings and I love it. Good video Brian enjoy all the content bro.

[@FABAutomotiveDetailing]

Thanks man! It’s a good wax for sure. We will see how long it lasts

[@PapaSmurf918Detail]

Awesome video brother! That wax looks soooo good. Love the deodorant stick style lol. Will be looking forward to durability tests in the 2 👍👍 beginning was funny with the bloopers. Funny when we just can't get it right!🤣🤣🤣

[@FABAutomotiveDetailing]

Thanks brother! The deodorant stick is different but an effective way to apply it to an applicator. Sometimes it makes me mad because I can’t get it right.

[@eamonkelly2792]

The hydrophobics are amazing brian, great video as always, safe journey to florida with the family 👍👍

[@FABAutomotiveDetailing]

Thanks!

[@ShineYourLightDetailing]

LOVE the comparison analysis!! Great video Brian. BAM!

[@FABAutomotiveDetailing]

Thanks!

[@HeWhoIsNamedPatrick]

This on top of evo can coat is amazing!

[@FABAutomotiveDetailing]

Yes it is!

[@fiouable]

I love this. A great test. Keep us informed as you go with the Journey. I will apply this with a black foam pad on my DA polisher. More uniform and faster.

[@FABAutomotiveDetailing]

Thank you! I will try it with a DA in the future.

[@tonymontana897]

The waxed side is much better at resisting water. The water behaviour differs slightly in favour of the wax. It sheets much faster than the Can coat. The can coat definitely lags behind a little. The beads are much tighter on the waxed side too.

[@FABAutomotiveDetailing]

I agree 💯

[@jasoncraig7096]

Thank you for the review! Can Coat is awesome. Curious to see the durability of the wax. I just used the restart wash. Seems pretty strong!! Curious to see your opinion.

[@FABAutomotiveDetailing]

You are welcome! I hope to try restart wash soon and we will see.

[@geirnaert]

Detailing Breakdown did a test with the Geyon Wax. After 5 days the protection was already weakened in a warm climate! Was planning to purchase this wax but stick with Turtle Wax Graphene Paste Wax. A top wax for little money.

[@FABAutomotiveDetailing]

We will have to see how long it lasts. TW Graphene is a great wax also.

[@marksafady1059]

Initially, this stuff works GREAT. However, from what I’ve seen, the durability is not good at all as a stand-alone. Thanks for the review.

[@audieconrad8995]

How do you define longevity? Sorry... durability...

[@marksafady1059]

@@audieconrad8995 from what I’ve seen, it lost its strong hydrophobics after a week or two, and after a month it was pretty weak, overall.

[@audieconrad8995]

@@marksafady1059 thx man. Everyone kinda-sorta has their own version so I always like to ask.

[@marksafady1059]

@@audieconrad8995 makes sense. 👍🏼

[@adyg8221]

I’ve had the wax on since April with about 3 washes. It is garaged and I can’t say I’ve noticed a change since I applied 2 coats initially.

[@dhaladetailing1225]

Great review FAB 👍👍 Also love a good drying with water demo😁 Haven't used Gyeon before so will definitely check them out 🙌🙌🙌

[@FABAutomotiveDetailing]

Thank you! Hydrophobic test are very satisfying to watch

[@neilwalker5041]

I have been using the Gyeon wax as a stand alone for four and a half months. My car sits outside 24/7 in Nashville TN. The hydrophobic behavior is still amazing but not as strong as when new. Maybe you can find out if the wax helps prolong the life of a coating? Thank you for the video.

[@FABAutomotiveDetailing]

That’s good to know on the durability you are seeing. That is the plan to find out if it makes the Can Coat last longer.

[@neilwalker5041]

@@FABAutomotiveDetailing I grew up in the eighties and nineties when Zymol concours was my go to wax. I was really intrigued by the fluorine wax. This product reminds me a lot of the original fusso wax. This years Gyeon products really are working extremely well.

[@danmorrissette4814]

Old School waxing job !! I Think i would use a thinner coat since it has to sit for 30 mins before removal~! results are Pretty Good! Awesome for Personal cars~!

[@FABAutomotiveDetailing]

Love old school waxing! I would do thinner coats also I was just following the directions for the review of it.

[@ddautodetailing]

Great video. The wax side seemed to sheet faster to me, but not by much.

[@FABAutomotiveDetailing]

Thanks! I agree on the vehicles hood yes it sheeted a little bit faster.

[@FredShramovich]

Looks solid, hope to try it one day! Good stuff FAB!

[@FABAutomotiveDetailing]

Thanks man

[@audieconrad8995]

Hey FAB, Hope your new gig is going well. Good to see you using gloves - In an industry [car care] rife with chemicals fluorine is a highly toxic element. As I understand Fusso Coat is loaded with it as well... As a former Nordic ski racer who used fluorinated ski waxes much of it has been banned due in part to it's extreme toxicity. Not preaching here but I am concerned that all should be aware. Keep up the good work and continued success.

[@FABAutomotiveDetailing]

Thanks! Yeah I always try to wear gloves when doing work on my cars or when handling chemicals.

[@tadscott565]

I personally think the wax topped side sheeted a little bit better than just can coat!

[@FABAutomotiveDetailing]

I agree 💯!

[@beerme_2]

Enjoyed the Video.. hope all is well safe travels to Florida

[@FABAutomotiveDetailing]

Thanks! We don’t go for a few weeks but I look forward to a vacation for sure.

[@Dirtracing141]

Wish you could apply it in sunlight

[@mattduffy2023]

Nice brother

[@FABAutomotiveDetailing]

Thank you!

[@WesleySutton]

Wax + can coat = amazing

[@FABAutomotiveDetailing]

Yes it is!

[@WesleySutton]

I’m actually doing this because of you 😂

[@FABAutomotiveDetailing]

@@WesleySutton Awesome! Have fun

[@joevanseeters2873]

WOW. I've been looking at that Gyeon Can Coat for quite some time but never pulled the trigger on getting yet. Your video has convinced me that I really need to try that stuff. Question Brian, on the bottom plastic panel at 17:21, is that coated with Can Coat also? It looks fantastic. If Can Coat can do that to plastics in addition to the paint, that's a big plus. Also, what about glass? Can you use Can Coat on glass too? If it's a one stop shop type of ceramic coating that you can put on everything on the outside of your vehicle, that would be well worth it. Thanks

[@FABAutomotiveDetailing]

Only thing on that trim on the test panel is the Gyeon Wax. Yes Can Coat can be used on trim I’m not sure about glass. In my can coat video I show the Hydrophobic’s of Can Coat on the plastic trim on the car when I do the water test.

[@6RAW6]

I don't remember but you ever use Fusso from Japan. If you have how do they compare. I used Fusson and love it. Don't use it often since customers don't really ask for hand wax. But longivity is pretty darn good. So far on one car it is 6 months in and looking good.

[@FABAutomotiveDetailing]

I have not tried Fusso Coat. Would love to but there are just to many products and not enough time.

[@6RAW6]

@@FABAutomotiveDetailing I totally understand. I don't test I really rely on you and other utubers, much appreciated.

[@norgerichard]

Incredible!!

[@hartlanddetailer5670]

Thanks for your videos, I appreciate them! I saw your video on the Can Coat, after watching, I now know what the product is. However, I am considering Car Pro Lite, because it has more concentration of SI 02? Is that correct? Any opinions from you or your viewers when it comes from Can Coat vs. Car Pro Lite?

[@FABAutomotiveDetailing]

You are welcome and thanks for watching. I haven’t used CarPro Lite so I can’t answer that.

[@porscheone9798]

I enjoyed your video. Thanks. I have a question of this product. I'm looking for Deep shined Wet look wax. Do you recommend Q2 wax for me?

[@FABAutomotiveDetailing]

Thanks! Yes Gyeon Wax gives great gloss and depth. Not the easiest on removal other then though it’s a good product.

[@porscheone9798]

Thanks a lot!!

[@Hutch400]

Left side was better....good stuff

[@FABAutomotiveDetailing]

Thanks!

[@kimnewling5728]

You need bigger shop! Lol. Could you see yourself putting wax on with a d.a. and a black soft waxing finishing pad?

[@FABAutomotiveDetailing]

I had a nice size shop until I bought the business. 😂 Yeah I actually I plan to try it with a DA in the future.

[@riccochet704]

Are you an Ardex dealer? Love me some Ardex products.

[@FABAutomotiveDetailing]

No I am selling all the Ardex I have at 50% off.

[@drivedetailedmtl]

can this be applied in direct sunlight while waiting 30 minutes?

[@FABAutomotiveDetailing]

I have not tried it in direct sun so I can’t speak to that.

[@alfredomartinez2615]

Looks like the website has a higher contact angle.

[@FABAutomotiveDetailing]

I believe the wax side does also

[@Oppastoppa914]

Can I apply this on my adams graphene coating advanced?

[@FABAutomotiveDetailing]

Yes you could

[@HardHeadMilitary]

Ok. Im trying

[@FABAutomotiveDetailing]

It’s good stuff

[@kiabass8798]

That wax is legit

[@FABAutomotiveDetailing]

Yes it is!

[@MNpicker]

Holy crap man!!😯🤘👍

[@FABAutomotiveDetailing]

Thanks!

[@johnpivovarnik9678]

The wax side sheet better

[@FABAutomotiveDetailing]

I agree!

[@andygold]

That squeaking I'm hearing sounds a bit scary. Sounds like marring to me????? 😥😁

[@FABAutomotiveDetailing]

I think it was because I was topping the Can Coat with it. If you notice when I applied it to the stripped panel there was no squeaking.

[@hoofhearted1326]

Only half the car MAN! that's got to be driving you nuts. Do What You Do FAB. HOOF OUT!!

[@FABAutomotiveDetailing]

You know it wasn’t easy to do!

[@maximolotov]

Paste waxes kill microfibre towels 1 towel where i live cost 5 bucks and there is nothing of what i know which could wash paste waxes from microfibre towels so you have to throw them away after single use. That's making it expensive to apply wax. If wax cost 35 and that is 10 applications then that is 3.50 per application , where microfiber towel =5 bucks so 3.50 +5 ...... :( That is why I have switched to TW CERAMIC Spray

[@FABAutomotiveDetailing]

With a good detergent like P&S Rags to Riches the towels will be fine. Let it soak in a bucket with water and 1 oz of Rags to Riches in it over night then wash the next day and they will be fine.

[@maximolotov]

@@FABAutomotiveDetailing will try it. Ty vm

[@jmmustangs3078]

1st

[@FABAutomotiveDetailing]

🏆

[@1stfrompuertorico568]

2nd

[@FABAutomotiveDetailing]

🥈