*NEW* long tube headers by speed engineering with a magnaflow

Thanks to speed engineering and magnaflow, I’m not sponsored or paid to show off their product I bought these items with my own money . Thanks to my brother from another mother Rene “milo” for the installation of you have any questions feel free to message me on Instagram.
Instagrams:
el_taliban_diego99
nbs_mil04

[@Koarzaa]

Thinking of doing this on my 13 Silverado. I already have a full borla cat back dual exhaust. Cant imagine what it will sound like after

[@Gsxr_slobo]

You have any problems with the y pipe ? My y pipe is hitting that bracket for that trans bracket . And any leaks from those clamps?

[@jose.bullzkc7385]

I installed headers and I feel like I got no bottom end power

[@oscaralejandronavarro4610]

Is the resonator still in there? Or is it just headers to muffler?

[@michaelscottroberts5444]

Sounds killer bro. Wondering if it drones in the cab when cruising? I hope not because the revs sound exactly like what I'm looking for my truck. Thank you for letting me know

[@efrenemg]

Sounds clean 👌🏽🔥 installing sum soon

[@maynoralarcon6646]

Does your check engine light come on after installing it

[@SJ-vz9ht]

Can aftermarket high flow cats be welded to the y pipe?

[@bigbeast103]

Are those MSD wires? Have you had any issues with melting the boots on the headers?

[@slammedbowtie8559]

4/6 drop. What size wheel and tire?

[@mishutkin101]

Did you have any check engine light problem after that install?

[@hotboyz4342]

Did u get the Y-Pipe for the headers also?

[@keithmagginni8746]

Did u tune it ?

[@daltoncow6051]

Was it the y pipe kit?

[@erikledesma4958]

Did it throw a check engine light on?

[@beanzchevy9272]

What size are those headers. 1 7/8 or 1 3/4???? Do u have the part number

[@SOCCERxCallofduty]

Love the grille too man thinking of getting that same one on my 2wd haha

[@eltalibandiego7010]

Ayy it’s whatever I loved that grill and slapped it on at the end of the day it’s your truck 💯

[@SOCCERxCallofduty]

@@eltalibandiego7010 well said ma guy 👌🏽

[@coupedeville9741]

Yo my boi, did the long tube headers clear the starter?

[@blacked_out_bowtie1513]

Nice truck! 👌 looking to put some speed engineering heads on my 15 Silverado, I see lots of people had clearance issues and some did. Did you have any clearance issues? Is it 4x4?

[@eltalibandiego7010]

No I had no issues and I have a 2wd

[@Jayygetrackss]

Nice set up bro 😎

[@eltalibandiego7010]

Thanks man I appreciate it 💯💯

[@carlosvlogz239]

Did you use the bolts that came with it bro or arp bolts?

[@eltalibandiego7010]

Yes I did bro everything that they gave me I used

[@brandonhernandez129]

What type of magnaflow

[@JuanGarcia-ty8yv]

Did u get the ceramic coated or why didn’t u add heat shield to it?

[@eltalibandiego7010]

No I didn’t get them ceramic coated, true stainless steel does not rust of flake. It just gets gold in color. And heat shield to what?

[@squallymold2411]

What drop?

[@renrivas123]

About to put speed engineering CAI, Longtube headers and True dual exhaust with custom tune tomorrow. Excited!

[@DRGRACING]

Post a video about it, I want to do the same thing to mine

[@renrivas123]

@@DRGRACING I posted to my Instagram west_side_monster

[@flowmagic5]

I have the same almost the same truck 2018 Chevy Silverado Z71 4x4 do you know if I can but headers on mine??

[@cliffgraves7349]

Um you can put headers on any vehicle

[@gerardoramirez961]

What magnaflow series did you go with?

[@eltalibandiego7010]

I believe it called the bullet I’m not 100% sure

[@stayhumble4461]

Sounds fucking nice compa 🥵🥵🥵🔥🔥🔥

[@slowrado1686]

Did u have to use the 02 extension or can u do with out them?

[@justinmeredith9618]

It’s easier to reattach it with the longer ones the stocks gets tight and hard to put back on

[@patrickwood9928]

But there's 4 o2 and on that kit it only had 2 on the headers and 1 on the y pipe

[@MGweightsNCars]

Could you tell a difference in hp ?

[@eltalibandiego7010]

You can honestly feel a little bit of it but not so much

[@ericg.201]

Kooks FTW 🦍

[@jesusrivera9764]

😍

[@eltalibandiego7010]

🤪🤪

[@mafiaboyz3]

Do the roar ! 😂😂😂

[@eltalibandiego7010]

🤣🤣

[@alejandronunez4983]

Nice what can wheel are those ?

[@eltalibandiego7010]

I believe there eight ball dubs

[@MrJunior6939]

Do you need a tune the truck after long tube headers ?

[@mloml41]

Yes

[@panchitoromero5042]

If you go catless yess

[@chronicmat5787]

magnaflow muffler only ?

[@eltalibandiego7010]

That’s what I use

[@alexgonzalez4714]

What size was your stock exhaust piping ? Did you have to welded it or just used the clamps they give with the headers

[@eltalibandiego7010]

I believe a inch and seven eights and I had to clamp them down I will have to weld them soon because it came apart once

[@antonioraigoza2648]

Where u get ur headers set up!

[@eltalibandiego7010]

Speed engineering headers with magna flow exhaust

[@timbowalk]

Who’s truck is the silver gmc

[@eltalibandiego7010]

It’s my bro’s truck if you like to ask him questions his Instagram is @nbs_mil04

[@allenmendoza9496]

About how much do those headers cost?

[@eltalibandiego7010]

500 to 600 bucks just for the headers

[@AdrianPerez-mr1vy]

What drop you one?

[@eltalibandiego7010]

4/6 drop from IHC

[@antonioalvarez1810]

What drop is that ?

[@eltalibandiego7010]

4/6 drop from IHC

[@alfredohermosillo4910]

@@eltalibandiego7010 does it bottom out alot or did you notch it bro

[@juangarza1300]

Whats the cost for that set up parts and labor wise ?

[@boratwilson9916]

my speed engineering headers came. catless. with a y pipe.long tube 1⁷/⁸ headers was a little over 400$ install was about 800. not sure if I was ripped off on install. but that was the only option I had.

[@boratwilson9916]

just steering you in the general direction

[@Zacatecano48]

Is it a 5.3 ?

[@eltalibandiego7010]

Yes sir

[@Zacatecano48]

@@eltalibandiego7010 How loud is it in person? I want a similar set up

[@agustinroque1]

Sounds badass homie.. did you get it with an y pipe or just the long tubes

[@eltalibandiego7010]

Y pipe bro

[@agustinroque1]

@@eltalibandiego7010 is it catted or catless?

[@crazyjay2101]

@@agustinroque1 the speed engineering y pipe is catless

[@tuyo7585]

Is tune required?

[@eltalibandiego7010]

Yes tune is required cats are deleted but you can still drive around without a tune for the meantime

[@efrainprado8897]

No cats ? What about your check engine light bro?

[@lynnv5838]

truck looks like my truck but mine is LT lol truck looks bad ass

[@eltalibandiego7010]

Mine is a LT as well lol

[@MariaPerez-qq1pt]

Wat exahust u got

[@eltalibandiego7010]

I got a magna flow exhaust off summit

[@bryanojeda7710]

Will it pass emissions

[@IDLawnAndLandscaping]

You got the part number for the magnaflow

[@eltalibandiego7010]

I do message me on Instagram unless you found it sorry for the late reply

[@IDLawnAndLandscaping]

@@eltalibandiego7010 dm sent

[@DiegoHernandez-dl5td]

does it respond better with the headers .? nice truck btw 🔥🔥

[@eltalibandiego7010]

To me yes I felt a difference it might not be a lot but you can feel it

[@carlsquire7443]

Clean your engine bay dude 👍

[@eltalibandiego7010]

Just did after that video 🤣🤣

[@moparrdudee87]

Can’t hear all of it because of the back ground music.

[@eltalibandiego7010]

My bad I’ll have to turn it down next video thank you info

[@eltalibandiego7010]

Thanks For the feedback 🙏🏽

[@jesussegovia6943]

did you use o2 bungs for the o2 sensor?