New Machine For The Shop

[@robertabernathy9676]

Black and orange is the color.

[@ProjectShopFl]

👍👍👍

[@adamchupa5884]

Congratulations on the forklift its gonna be a huge help and also will be a safer option for you than usen the engine hoist cranes because when was weighing barrel's it was being maxed out and at points it could have caused serious accidents because loads couldn't have flipped it over

[@ProjectShopFl]

Thanks!

[@25vrd48]

When you turn the forklift on it's side don't jump off , ride it down keeping your body clear of the roll cage . I've turned them over and rode it down safely .

[@ProjectShopFl]

Thanks for the tip.

[@georgeWhitfield-z1f]

I vote we call it the Copper Queen

[@ProjectShopFl]

😂😂😂

[@davidbofin2658]

Definitely a good buy, viewing from County Sligo Ireland 🇮🇪 🇺🇦🤠🚲📷✍

[@ProjectShopFl]

Thanks!

[@MikeZMonroe]

Next time at the Dollar Store - a spray bottle of Windex and some paper towels for your trucks front window, interior and exterior 😊

[@seancasey2444]

It was pretty dirty

[@Monkey-boyo_0]

You don’t want to use windex on your car windows especially if you have tinted windows besides it’s a scap truck

[@ProjectShopFl]

@@MikeZMonroe thanks for the suggestion

[@luigiaqua2263]

Sorry, ut a real scrapmobile has to have its patina. And Big Red Scrappy has the fitting corrosion already. So please ScrappyBear love it like it is until the vision is no more possible through windshield.

[@tj8244]

Sweet find. Congrats on the new scrappin machine. Gonna save you tons of time and your back. Time is money.

[@ProjectShopFl]

Thanks!

[@AdamW-tx]

If i told you how many Bay Doors i've seen hit by forklifts, you'd think i was exaggerating (or lying) I Swear it's gonna happen EVERY time Chuck drives the forklift.

[@ProjectShopFl]

😂😂😂, I've seen 3. 1 was me It was flapping in the wind when I was done. lol

[@LF_63]

Wow ! Congrats on your purchase, i'm so pleased for you ! Def a time and back saver, on a bargain ! For sure it needs PS colors on it (as you know, colors give capacity 😂👍)

[@ProjectShopFl]

Thanks!

[@25vrd48]

Lower the forks to the ground when parked to keep from tripping over them . Your feet and legs will thank you .

[@ProjectShopFl]

Thanks for the tip!

[@Suzu92]

Cant wait to see the rusty panels come off!

[@ProjectShopFl]

👍👍👍 We have been getting all the rust out.

[@thescrapmeister]

That was money spent well! Great score.

[@ProjectShopFl]

Thanks!

[@bentleyalder5492]

That barrel clamp is hella dope❤!! 🔥

[@ProjectShopFl]

Thank you!

[@luigiaqua2263]

"can hear it leaking..."🔥 Paint it in copper as its your copper mover.

[@ProjectShopFl]

Thanks!

[@MoDave82]

Congratulations on the forklift

[@ProjectShopFl]

Thanks!

[@Paul-kw1no]

Finally. You won’t live without one now. We have had a small Nissan for 20 years now and it’s been great.

[@ProjectShopFl]

Thanks!

[@nspro931]

I have 2 old forklifts older than that, one all worn sloppy, the other kind of rotted from sitting for years, did not regret buying either one of them. When you have 2 you can use one for muscle when the other needs repair and also helpful for tandem lifting large and heavy items.

[@ProjectShopFl]

Nice!

[@scrapitjc]

Great purchase, will help you out immensely 😊 keep doing it😊 and as someone else said, She looks like a " Lucy"😅

[@ProjectShopFl]

😂😂 Thanks!

[@markrice3502]

nice peace of equipment for sure it runs and it moves stuff great deal if you ask me thanks for sharing with us

[@ProjectShopFl]

Thanks!

[@andrewsabedra9329]

hoses are crossed simple fix good score

[@ProjectShopFl]

Thanks!

[@stickhillfarm]

hell yeah derek you forklift certified now!

[@ProjectShopFl]

😂😂 Thanks!

[@darenfry3725]

Go to the scape car yard and pull out a really comfortable seat or even 60/40 seat and mount it 👍👍

[@ProjectShopFl]

Thanks for the suggestion

[@adamwall1966]

Love my 1960s tow motor forklift so nice game changer you are going to love it

[@ProjectShopFl]

Thanks!

[@bfd1565]

Just an idea. Glass, are their glass blowing companies in or around your area? They might be able to take some of that glass off your hands. Free raw material for them instead of you paying cash to haul & dump it.

[@ProjectShopFl]

I will have to look in to that.

[@seancasey2444]

Great score with a little work and money you got yourself a great little forklift.

[@ProjectShopFl]

Thanks, we have been working on it it's coming along great.

[@Newlifesobriety53]

Congratulations on the forklift, that’s awesome 👍🏻. The shop really needed it. Just keep getting bigger and Never look back.. ps. Big Fan!!

[@ProjectShopFl]

Thanks!

[@rattrap8819]

Awesome!! I pray for you to have life changing contracts for Mega Scrap.

[@ProjectShopFl]

Thank you!

[@jasonpeters3228]

Nice well deserved score of the forklift. I personally wouldn’t buy a used electric fort lift as the batteries are always on the way out and once they no longer function enough it is cheaper to buy another fork truck. Gas ones are worth fixing to me. You do need a 6 or 8 lug tandem axle trailer eventually also.

[@ProjectShopFl]

Thanks, I have a big trailer now I have a fork loft I can fix it.

[@experiment7752]

May God bless you and may today be the happiest day of your life.❤

[@ProjectShopFl]

Thank you!

[@dimbag1]

Congratulations. Bro.

[@ProjectShopFl]

Thanks!

[@RobertLivingstone-n4g]

good video congratulations on your new toy

[@ProjectShopFl]

Thank you!

[@janetlutter9925]

I wish i was in florida its fricking cold in sd

[@ProjectShopFl]

It got cold here too I think in the 60's I was freezing I had to put pants on. lol

[@egyptbrown-zl5jb]

@@ProjectShopFl I live in Ohio and weather in the 60s is not considered cold I come outside with tank tops and shorts 😂

[@noneyabeeswax3200]

Absolutely love the forklift brilliant purchase older Nissan and Honda products are top notch in my opinion and they are designed to be worked on. I hit your PayPal a little(forklift fund),I sent friends and family so they can’t scam you😊will try to send more as it comes along,love the channel man.

[@ProjectShopFl]

Thank you I really appreciate it. 👍

[@HappyAst34]

Congratulations!

[@ProjectShopFl]

Thank you!

[@lppenor]

Great score ! On your ForkEn Lift !!! Needs a little Love but it has a mass quantity of potential !!! 👍

[@ProjectShopFl]

Thanks!

[@GilSkillz]

The propane forklift is a welcome addition to the Project Shop I'm sure! :) Could be a game changer of sorts for ya! :)

[@ProjectShopFl]

Yes! and a back saver. lol

[@PandotheWise]

Hell yeah that thing’s badass!

[@ProjectShopFl]

Thanks!

[@picklesteve7404]

imagine how many copper donuts you would be able to pick up with that forklift lol

[@ProjectShopFl]

All of them I hope. lol

[@robinjeffryes2575]

Sweet now you need to move some copper no big deal. That's cool bro Rob from California be safe out there brother.

[@ProjectShopFl]

Thanks! 👊

[@Kreacher1974]

Even if you spend $2000 to fix it up, you will essentially have a new forklift. It will be in better condition than the others you saw on marketplace.

[@ProjectShopFl]

@@Kreacher1974 That’s what I was thinking. It’s coming along great!

[@brian56]

Grab a spinner knob for the steering wheel. Nice find!

[@ProjectShopFl]

Thanks I am looking for one.

[@empirefinds]

Awesome score brother. Looking forward to seeing the project shop touches being added.

[@ProjectShopFl]

Already putting the touches on it. lol

[@empirefinds]

@ProjectShopFl it's going to be awesome

[@darenfry3725]

Orange/black great colour as ms colours name maybe Tiny

[@ProjectShopFl]

Thanks, I like that name.

[@adamwall1966]

Controls you will love when you get some time on it

[@ProjectShopFl]

Thanks I hope so. lol

[@xvderty1520]

It's always nice to see an object that has been left out in the open to rust, being bought and fixed up.

[@aarongrabowski3775]

Your right. Our society has kind of made it seem ok to just throw stuff out and buy new. People back in the day all knew how to troubleshoot and repair their own stuff. That is not the case anymore.

[@ProjectShopFl]

@@xvderty1520 I love to restore things and repurpose things if possible

[@brian56]

Keep the slide rails on the mast for the forks well lubed and they'll slide almost effortlessly

[@ProjectShopFl]

Thanks for the suggestion

[@frazeeken]

Do a copper anodize on the aluminum diamond plate and call her the copper queen

[@ProjectShopFl]

😂😂😂

[@bradbex9051]

Awesome man, congrats

[@ProjectShopFl]

Thanks!

[@ramblingman8992]

Thinking about the colour scheme. You should keep the top a light colour such as orange, cream or white. By all means paint the safety cage black, but keep the rest light as it helps keep it visible to others when in use. As you are working on it, there looks like plenty of space on the dash to add switches for both front a rear working lights. Also, if you don't like the strange diagonal operation of the mast controls, there is nothing stopping you from swapping a couple of lines around on the actuator block.

[@ProjectShopFl]

Thanks for the suggestion

[@Opinionatedguy1989]

You need whole new cab supports. You can probably make them yourself to save money. If there is any damage to any part of the cab structure, that whole entire part needs to be replaced. For safety. The left pedal is your inching pedal. For efficient operation use the inching pedal as your brake pedal and the brake pedal on emergencies.

[@ProjectShopFl]

Thanks for the suggestion

[@bfd1565]

Score !!! A little love and you'll be off and running without issues.

[@ProjectShopFl]

The thing has been working great.

[@peteoneill5799]

She looks like a Lucy to me. Great buy should help loads with keeping the load off your back

[@ProjectShopFl]

Thanks!

[@ebre3080]

The pedals are as it should, the right is gas, left is clutch and brake in one....don't need the middle one. I learned (the hard way) ALWAYS use the handbrake when you get off, even for a second. There will be a moment it runs off on you if you don't make it a habit. It it a cute little forker, but it still is a steel brick.

[@ProjectShopFl]

Thanks for the info. 👍

[@AdamW-tx]

For sure. and if it doesn't work, FIX the handbrake first !

[@KevinHarvey-qw5mj]

The heads need magaflux like a x-ray we had to do that with are heavy equipment picks up everything glad you good a machine you are comfortable buying now get to work lol im watching this at 2:00 am Tuesday morning be looking forward to your progress on forklift main thing is hoses if look iffy replace glad to hear about safety first main thing to look for brakes working smarter not harder get more done good video enjoyed it be waiting for next video thanks

[@ProjectShopFl]

Thanks I will be going over the breaks next.

[@bettymorgan4909]

Nice score. Funny you found it when getting smoothies! Im glad you are doing good enough with your channel to get something that that will help you out!

[@ProjectShopFl]

Thanks, It will be a game changer for sure.

[@matthossack]

Do the roll cage! Replace it as it seems kinked on all the uprights 🥴

[@ProjectShopFl]

I will be fixing them.

[@SuperRashead]

My adcice is: Look after the roof, so if you dropp something, that you wont get it over you! Then you can change hoses etc. Happy for you! Then you can paint it in your colors! Change the oil etc on it!

[@ProjectShopFl]

Thanks!

[@charlesyates6687]

Got the seat you need here in tampa for your forklift .

[@ProjectShopFl]

Thanks, I got some local.

[@taunusrunner3767]

nice... all the years i dont understand, how you can do your hard work, without a forklift. 🙂

[@ProjectShopFl]

@@taunusrunner3767 I’m a slow learner. Lol

[@dwaynefowler7093]

windex and news paper ya the fork lift awesome deal

[@ProjectShopFl]

Thanks!

[@johndaley9188]

It's a CPH01A15V . Parts seem to be available, but manuals are hundreds of dollars. Plan B.

[@ProjectShopFl]

Wow! 😳

[@nickshelley3118]

Put Steves 20's on it.

[@ProjectShopFl]

😂😂😂😂

[@AdamW-tx]

LOL 🤣

[@aarongrabowski3775]

Nice score Derek. You have to expect that it will need some work when it’s only $1500.

[@ProjectShopFl]

We already dove in to it. lol

[@handdancin]

congrats buddy. if it doesnt work out you might look for walkie stackers

[@ProjectShopFl]

Thanks, It has been working great

[@isaiahorten101]

Congratulations on the deal and your right market place is really over priced right now

[@ProjectShopFl]

Thank you

[@marcchapman4875]

The one thing about the roll over protection cage is that Oshawa does not like you cutting or welding on it unless after the work has been done that it is reinspected

[@ProjectShopFl]

Thanks for the info.

[@ramblingman8992]

Looking at that weight plate, you can lift a standard pallet with 2490Lbs (1200Kg). The most important figure is the middle one as it indicates the load centred on the middle of the forks.

[@ProjectShopFl]

Thanks for the info

[@thomasroberts9752]

saved a thousand and your backs

[@ProjectShopFl]

👍👍👍

[@TheSafetyMarshalPSF]

Really. Smoothies.

[@ProjectShopFl]

Yes awesome Smoothies! 😂😂😂

[@simonjohansson3900]

Im a forklift mecanic and i think you should only repair the saefty stuff and that one hose. Dont over do anything that you dont need to. For exampel the chains you can measure if they need replaceing. If the chains is 3% worn out you must replace them. I recommend lupe upp the forklift and use it. 😎

[@ProjectShopFl]

Thanks, I am gonna do that and paint it.

[@chrisjudd8576]

Name for the forklift. CRUSTZILLA

[@ProjectShopFl]

😂😂😂😂

[@redfishfun540]

I think you should call it rustalita

[@ProjectShopFl]

😂😂😂 Thanks!

[@tillmansomethinrother8649]

I just watched another channel , where the guy bought a non working propane Clark lift for $2500. Fixed it. Now he's going to sell it. But he bought a small working electric lift, for his shop. Looks like just what you need. Sounds a little like the exhaust needs addressing.

[@ProjectShopFl]

Thanks1 yea we had an issue with the exhaust already. lol

[@johndaley9188]

Tractor or riding lawnmower seat???

[@ProjectShopFl]

Yes, I will be going to tractor supply this weekend

[@shabernastysmith9396]

If you’re gonna paint it orange, name it Ginger.

[@ProjectShopFl]

😂😂😂

[@robk1310]

Second!!!! 👍🏼

[@ProjectShopFl]

👊👊👊

[@petepeterson4540]

hoses filters look for leaks leave chains alone very expensive and it is already stretched don't disassemble mast looking for trouble there too if cylinder is not leaking go with it but buy a kit for it clean flush tank inspect inside and out replace all filters fluids leave wheels be a thousand for the wheels if they are not chipped or cracked. hey other than that grrrreat you will know what you are going to do with it after your first lesson in expenses and how many bolts are corrosion welded. paint is your cheapest do it list. congrat's

[@ProjectShopFl]

Thank you!

[@nicholisking9272]

Should do the orange and black but paint it to look like prison stripes

[@ProjectShopFl]

😂😂😂

[@DaydreamerFishing]

I was watching a scrapping video from Pakistan and noticed they were wearing the same sandals as you. Are those specially made for scrappers? 😂😂

[@ProjectShopFl]

😂😂😂 I keep telling people I am paying homage to them guys. lol

[@sheepysallotment956]

And on the next episode of pimp my forklift…. 👌🏻👌🏻

[@ProjectShopFl]

😂😂😂 Yes!

[@johndaley9188]

What's the model number. Found some manuals.

[@johndaley9188]

Figured it out.

[@ProjectShopFl]

👍👍👍

[@aarongrabowski3775]

Anybody know what part of Florida he is in?

[@bettymorgan4909]

West Palm Beach.

[@ProjectShopFl]

WPB

[@y.lelivelt2619]

You don't need Christmas presents anymore...

[@ProjectShopFl]

😂😂😂😂

[@silverlicious2086]

For $1,500 and working? No brainer to purchase it. You can fix it up really nice. The mini size is perfect for what you need inside the shop. Possible name could be "Mini-Me" from the name of that little midget character from the Austin Powers films. The Dumpster Lid for the top is hilarious but it works.

[@ProjectShopFl]

Thanks, I like the name. lol

[@68Eric86]

Paint the counter weight orange and the roll cage black. Great find!

[@ProjectShopFl]

Thanks!

[@twilkinson960]

Congrats. You stole that thing. You'll get used to that cross control on the forks in no time. #1 find the gas leak, #2 replace that hose.

[@ProjectShopFl]

Thanks for the suggestion

[@aarongrabowski3775]

That pallet jack probably just needs to be bleed. Hold the handle like you are lowering it and pump the handle about 10-15 times. Make sure it has hydralic fluid in it first. Hope this helps.

[@ProjectShopFl]

Thanks!

[@PCMcGee1]

Second?

[@ProjectShopFl]

Dang!

[@robk1310]

You’re first.

[@PCMcGee1]

Good deal, cheaper than a golf cart.

[@charlesyates6687]

​@@ProjectShopFlyou can put your glass in the green recycle cans instead of taking it to the dump .

[@Д.Неуловимый]

Keep the original paint scheme. At least keep operator's cabin white.

[@ProjectShopFl]

Thanks for the suggestion

[@robinjeffryes2575]

A your on your way to the big time just bullshiting bro that's to cool.

[@ProjectShopFl]

Thanks!

[@bigjohn20081983]

You're probably looking for good names but it would probably end up getting called something like the corner hoe if it was in my shop because she's a dirty girl but can get the job done

[@ProjectShopFl]

😂😂😂😂