New Multitool! (Walther GMT150)

[@maxlvledc]

Wow, we have some seriously passionate Walther fans. Firstly, I definitely should have done more research on the toolset prior to release. That is on me. However, for a "Gun specific" multitool only 2 of the 7 implements have anything to do with guns. The rest are generic in nature. Even if I give a pass to the quality on those items (which isn't great). The other implements are just thrown into it. Where is the carbon scraper? Sight adjustment tool? And I'm sure there are many other gun specific tools that would have been better than a spare blade or the file that doesn't have any texture. Flame on! Cheers, Dominic

[@pikemaster20]

I'll be honest I was disappointed for a moment. Then I saw this comment 😂😂😂 perfect. Addressed your flaw and came back strong, you are honestly inspirational.

[@EdFromTheBlock]

Hitting the nail on the head here... Love what Walther does in their pews but for this to be a pew maintenance tool... Meh.

[@squirrelsurvival]

Walther is my favorite gun manufacturer! 🔫 ❤️ Thanks for the content man!!

[@johnsanford3596]

Walthers is primarily a maker of PISTOLS, so there's no sight adjustment tool or carbon scraper needed, in contrast to prior Leatherma, SOG and Gerber tools that are focused on the M16/M4 platform. As for the craptastic file, your criticism of that is dead on.

[@gerald8573]

@@johnsanford3596 Yes. Also: Walther is a German company. Not many direct gas impingement systems here. Stroke piston systems (no matter if long or short) don't get their breech dirty as much.

[@GarrettsGear]

They certainly didn't "just throw them in there" Guns don't typically use Phillips head screws or require scissors. It's a Gun Maintenance Tool, made by a gun company.

[@maxlvledc]

Sadly the small flat head is so thin and flexible I doubt it will last more than a few uses.

[@CharlesHeller]

@@maxlvledc Would work very ell on screws on grips of a 1911, which you do not want to over tighten.

[@danewood2309]

@@maxlvledc the flat head is designed to be specific to Walthers, as is the spring puller

[@Woowoo88]

By walther for walther pistols. I would have put a dedicated slide release key on there because walthers require a key to unlock the slide to take it off. My buddy had one that he got on the private sell market and it didnt have a key so i had to rig up one out of other things to turn the pivot in the frame to let the slide come off. I believe Ruger uses the same thing or type but their own key has to be used. I know the LC series does anyway.

[@davidkuehne476]

@@Woowoo88 It's a schrader valve core tool.

[@davidbrewer359]

GMT = gun maintenance tool

[@frakismaximus3052]

Niiiiiiiiiceee

[@johnshepherd9676]

Bingo. The name on the tool is a dead giveaway.

[@abc456f]

​@johnshepherd9676 Also who makes it.

[@rshinn8776]

I was wondering if it's for their guns

[@OutlawAlaska]

Yep, this isn't your standard load out EDC tool

[@robertmoorej]

The little hook is for clearing a failure to extract.

[@anthonymiller8979]

Handy rake tool for picking locks too 🙂

[@PaulsToolReview]

Or grabbing a spring leg to put it a post...this tool is designed well for gun maintenance. A small 2mm hex bit would be useful to add for some grips and a small punch to push pins through instead of a serradded edge would make it ideal.

[@InvidiousIgnoramus]

Umarex (Walther) calls it a spring hook.

[@PaulsToolReview]

​@@InvidiousIgnoramusThat's what I thought and use it for...

[@JeffBradley-yu4tr]

Using a steel tool for that is a bad idea. If this were the purpose, then the hook should be brass or polymer.

[@johnshepherd9676]

You can tell whose EDC includes a firearm and whose doesn't. This tool would be nice to have in the range bag or in the field. I probably won't be getting one because I already have a bunch of tools in the range bag.

[@Sammysosa518]

Cool bud

[@CA_0341]

Looks like those are all tools for weapons maintenance. It’s very specific to gunsmith’s. That multitool will NOT be for most people’s needs. But I like it and will use one as an armorer. I didn’t even know about that tool so thank you

[@seanthomas8864]

I was wondering if it was produced by the Walter firearms company. I guess that would explain it. I do love the size and shape, but as he says. I don’t really need it.

[@AndersTornqvistsvedbergh]

The "thin and long" formfactor is interesting. Also that it's so light. Inspirational

[@IAN_G_EDC]

That’s a very useful little gun maintenance tool! All the implements would work great for gun maintenance

[@frakismaximus3052]

Guns are cool

[@rebel-yellenterprises1479]

Thank you for showcasing this firearms maintenance specific multitool. I just ordered one for my range bag.

[@YuhNinja]

you know what sounds like it was thrown in there? This video onto KZbin without even looking at the product page or doing a lick of research lol.

[@muxmurki1497]

I looked at the GMT 150 because I'm writing a book on MTs and other pocket tools, even telephoned with the responsible product manager (here in Germany). The file may not be the greatest, but particularly that "weird thing" you didn't understand is very helpful to push an pull springs in weapons. So, as a lot of others correctly stated before, it's a specialized tool. On the one hand it is just that. On the other hand, as you stated yourself, it has got a very interesting form factor for the pliers. As I have commented several times, in comparison to small pliers from Knipex (and also some other companies) EVERY MT pliers fail to help to cope with medium jobs. Even a LM Surge pliers will fail to move a nut of 1/2 or 3/4", or get a grip on something of 20mm or more in width/thickness - which is no problem for a Cobra 150. But a small pair could complement those nicely. The Nextool Sailor and also the SOG power pint are pretty OK in that regard, but on very heavy, clumsy frames. So if you want a size between a real pair of pliers and the Victorinox pliers on SAKs, this fits perfectly... plus all the specific stuff.

[@maxlvledc]

question, what are your thoughts on the 100 cobra?

[@bighouse9524]

It has the weird tool set because it is a firearms maintenance multitool. Which it actually has a pretty decent tool set for. But from an edc perspective most of the tools are useless

[@chrisleeks3890]

Walther should have given it away 😁

[@palerider7171]

Dominic this has been mentioned by others but this is a Gun Maintenance Tool. Typically these have a few general tools, some ok others there to fill a slot with a few firearm specific tools especially those pertaining to the brand. Get the point you’re making however I doubt if Walther is trying to get into the full blown multi tool market. Full description below: The Gun Maintenance Tool 150 is a featherweight champion when it comes to gun maintenance. It includes eleven practical tools that together weigh only 66 g for quick help on the shooting range or in the field. Tools: pliers, plain blade, serrated blade, screwdriver, diameter gauge, file (fine and coarse), ruler, cable cutter and spring hook, plus a bottle opener for when youve finished your work. The GMT 150 can be carried almost invisibly on your belt in its nylon pouch.

[@Woowoo88]

It's because that is made for a gun specifically Walthers line of pistols. That's what GMT stands for. Gun Maintenance Tool. That injection molded plastic is called polymer and it's what they make their pistol frames out of. I would also say your gauges are for barrel sizes. If you are going to review things know what they are for.

[@SgtDuster]

Anybody can call himself a "reviewer" nowadays. It's not a problem if you don't know everything, just don't pretend

[@Woowoo88]

@@SgtDuster exactly! Now usually this guy is spot on for the most part but that was not in this video. I bet if he looked up gun multitool he would see a lot more similar to this one. This one isn't a good one in my opinion either. Half that stuff you don't really need to work on a pistol. What you do need is punches to get roll pins out and precision drivers maybe a sight pusher, scraper, etc.

[@InvidiousIgnoramus]

@@Woowoo88The tip of the file tool is sufficient for poking a roll pin out enough to pull it the rest of the way out with the pliers. Alternatively, just do what I do and keep an equivalent size hex key in your kit.

[@pj4433]

Not sure what the diameter gauges are for, too small for barrels. But they look good for me for measuring pins etc that you will find holding firearm, parts together.

[@elmadicine]

I know this is a tool made for guns by a gun company, but it is legitimately an awesome design and form factor. I would love to see them expand this tool into a line with more widely usable toolkits, better tool steel and quality control, and even larger versions keeping the same slim gun-grip-textured poly scales but with the slim form factor

[@paulgraumann2774]

As a guitar tech and work on bikes there are many times very small hex drivers are needed and as many different metric and standard sizes from .050 " to 5mm and also string spacing and nut sizing from 42mm to 45 and other sizes from 2 1/4 to 54 mm. i actually would appreciate the guages and rulers. Kind of a pain to constantly have to have at hand or reach for calipers in either fractional or decimal inches or mm. If the scale could double as a depth guage that would be even better. Have seen some bike specufic MT and one for casual guitar players but nothing as extensive as this one for pistol owners. This video points out a major for me problem with MT tools and reviews. The real quality in hardness and longevity of the incuded files whether diamond or otherwise never seems to be really tested ditto for some of the other tools. The scissor quality's are tested well and sometimes the knife blades and steels but rarely tbe main tool the pliers/ cutters. Where is the Rockwell hardness tests and such , german knife makers use to include the RH mark ON THE BLADE. The " it wont even file my nails" test I find totaly inadequate and is the sort of test that reminds me of US car reviewers basing a major time of their review to how many cup holders and interior gadgets the car " has" . I seriously doubt if any of the MT have a great file as even Victorianox only incuded a nail file as they knew that a real file that thin at RH 62 would just snap with the slightest consumer style mis use. So how about at least a diamond dust file review of how it cuts/ lasts in knife steel. Presumably that would be the primary use in EDC and outdoor use, but I see nothing about this. As guitar fret filer in an ever increasing use of hard SS fret use amoung even Chinese makers this is a critical tool.

[@W-C-F-o1k]

Hvac budget is a king. He was my first multitool channel. And now I've found you! Another king channel

[@ToolTechGeek]

these two guys have been consistently delivering top notch videos in this space. I’m grateful that we have them.

[@W-C-F-o1k]

@@ToolTechGeek 100%!

[@ddayblue]

Good channel

[@hrmIwonder]

The SOG powerpint for the win! I ordered thumb studs for it, made the bottle opener into a flathead, filed the scissors to a point and rearranged the tools so the most useful ones are on one side and all one handed opening and closing. It's an excellent compact tool.

[@j.t.553]

You should make a video on how you did all that. I would love to do everything you did. Or even offer the services to people for $. 😮

[@lesternielson9280]

is it possible that it's a companion tool for one of their firearms?

[@Locklear33]

I dont think so….none of the included tools seem particulary useful in firearm maintenace or cleaning

[@frakismaximus3052]

I love firearms!

[@johnshepherd9676]

​@@Locklear33 on the contrary, those tools are for gunsmithing.

[@FireFighterChen]

@@Locklear33 most of those tools are great for pistol and optic maintenance

[@gordonwelcher9598]

Ridiculous! Why would they make a tool to help service their products? Surely it is meant for electricians only.

[@AaronBlankenship]

There's a reason I don't carry folding pliers in my pocket anymore, and this video explains it perfectly. Once I can get a strong set of pliers plus Phillips plus scissors, it will live on me for the rest of my life. I probably grind the tip of the pliers to a little bit more of a point.

[@B0n3rdawg]

I would love a slimmer, more pocket friendly option like this from leatherman or victorinox.

[@etherealicer]

Victorinox makes the Victorinox FASS 90 for the StGw-90 (Sig 550) and it is mostly to adjust the sight. To my knowledge that is the only gun tool they make. Honestly, I would look at Real Avid, they have quite the selection of Gun-Multitools and they seem to be of decent/good quality.

[@RolandLowhorn]

I agree . .Strong saw ,file one side rougher..that works smooth metal Strong screw drivers .tight door screws ..actually work things ...

[@BluesmanSLC]

Thanks for reviewing this tool without actually knowing what it's for

[@jonniez62]

It's implemented correctly for Walther hand guns

[@CA_0341]

Absolutely!

[@Robin6512]

not only Walther 😁

[@yogibro6442]

Why the dull file ? Anymore that's what I look at first to decide if the tool is serious.

[@Crus0e]

100% agreed, hopefully they make a general purpose version and not just for gun maintenance

[@JeffBradley-yu4tr]

For a gun specific tool, it needs a small punch (1/16"), a medium punch (1/8"), a flat head, a Phillips head, a 1/4" drive, a micro "pry bar" made of something softer than steel (e.g. polymer, brass, etc.), and parallel pliers. If you are specific to a model (AR, shotgun, etc.), then you may want to add a front sight tool, choke wrench, or something along those lines. It doesn't need a knife blade at all. (How many people are there who carries guns and don't also have a pocketknife already on them?)

[@marcusott5054]

Glad to see more use of polymers in multitools. Below certain sizes you don't really need the strength of a steel frame anyway (mostly... I know some do). I'm aspleasantly surprised as I was back in the day by the Benchmade Bugout. Trimming excess weight.

[@brianwood876]

"in addition to the pliers, all you really need in this tool are 3 things. A blade, a flat head, and a Phillips head".... And that's why i happily edc a skeletool cx

[@josephthennes4656]

Nice multi tool, great for a range bag for sure. Now modifying it was my first thought and the possibilities are endless. I see a whole future of vids. Thanks for your time

[@RedneckDeluxe]

When it comes to EDC, the Leatherman Skeletool is perfect in my opinion. --- pliers, screwdriver and blade. Nothing useless added.

[@squirrelsurvival]

For EDC, nah im good. But to keep in a range bag, hell yeah! Also this is not meant to just carry, its for taking apart and cleaning guns. Maybe they should make an EDC version.

[@GoodPhotos]

Pliers/wire cutter, main blade, straight slot, phillips, can opener/cap lifter, awl, scissors, wood saw and metal saw/file in that slim form factor would be great.

[@rjflippo]

Thanks for the info Dom, Budget HVAC has some great finds.

[@sinister2376]

That tool is amazing for firearms cleaning. That's like 90% of a cleaning kit.

[@KnightRyder1990]

So the tools are meant for gun maintenance, Not EDC

[@blade9292]

You know some gun maintenance tools can be used for EDC or more importantly, other maintenance fields than just guns. I don't how this tool translates into a walther pistol, but I've seen more general purpose multitools from walther.

[@KnightRyder1990]

And some like this are just made to throw in a range bag to fix guns 🤷‍♂️

[@yvanleivacastro6027]

Well thank you. I was looking for this kind of multitool for bringing it to the shooting range. It's just perfect 😊

[@christopherchapman8893]

Well, I (was) going to be (helpful) and point out that the tool configuration signifies that this is more of an armorer's or CCW EDC tool, but this has been clearly communicated over the vast (and often unnecessarily rude) comments section. What I (will) say is mistake or not, thanks for posting this. I was unaware of this tool and will be adding one to my bag. Leopold also makes a tool (similar) to this which I own and is great to have. It doesn't have pliers so the Walther is actually a step up! Cheers!

[@andreasmerkel5717]

Maybe it fits in a gun case, for regular use there's nothing better than the Leatherman Wave. Full steel, several screwdrivers, a scissor, a very good diamond file, sharp blades and an amazingly sharp saw.

[@justinator1010]

When I'm not carrying my surge i tend to carry a triple blade friction folder because most edc tasks are to cut something open or shorter if i require anything else in never more than a few steps away from a screw driver or some type of pliers unless i leave the house without the car and I'm not at work.

[@tariqkamil7853]

Amazing, no mention of gun maintenance at all about the tool.

[@InternalIbex]

This isn’t supposed to be an EDC tool. It’s designed to go in your range bag or go bag to do gun maintenance.

[@maxlvledc]

The gun specific tools are fine, but most of the more generic tools are mediocre at best. Like the file that has no texture.

[@InternalIbex]

@@maxlvledcnever said it was a good gun tool 😂. Hook is for springs, guages for telling diameters on parts or bullets and whatnot, no carbon scrapper because many gun manufacturers tell you not to use them. It’s to do minor things to your gun at the range or in the field. Not at the level that would require an armorer.

[@BigChiefWiggles]

Looks like a very light tool for scraping your AR bolt and doing other cleaning/maintenance tasks. Considering how heavy a military loadout is: it need to be as light as possible.

[@adrianTNT]

I got mine today, unfortunately when it is closed, the handles do not align and they rub / move left/right a bit. I wish it had a phillips head too. It is nice, small and light thou. Smaller than you would expect :)

[@Ashton.everydaycarry]

I really love the size/form factor of this. Kind of reminds me of the sog baton multitools.

[@ucitymetalhead]

I normally carry my mt on my belt and usually go with a wave plus or surge/st300 but around the house I use the powerpint and it's just awesome.

[@dfx7105]

Cut your nails with nail clippers… that’s a file or metal burrs , Good review, right tool right job .

[@LastChanceKnives]

With a better set of tools the Walther would be a famtastic lightweight option for summer carry. If I am not carrying a Wave, Free Series, or Surge a modified SOG Powerpint is the small tool of choice. I find it to ne the smallest tool that "works".

[@Lostcyborg]

i own a couple walther pistols and let me say i never heard of this tool. My range bag usually has a leatherman signal and some of the best tools made in the USA Chapman MFG. Ottherwise very informative video.

[@Robin6512]

this is in my range bag. great tool

[@j0shll0yd]

Unless you're carrying a multitool on your keys, the weight shouldn't make a bit of difference. I'm yet to hear someone complain about being fatigued due to the excessive weight of their multitool. I don't know why people make a thing about weight. Usually heavier means stronger/heavier duty, but not always. Either way, the components and their ability are 75% of the priority to me, and how it can be carried is 25%. If I can't carry it how I want to carry it, I have little use for it unless it's just something that's going to be thrown into a backpack or truck for occasional usage. If it can't perform with the tools it has and they are just for show, I have no use for it. If the tools they put in are useless to me, like an awl, I have no use for it. It's amazing to me that so many companies make so few actual high quality useful multitools.

[@robbybankston4238]

I used to have an old black Leatherman PST II that was a more compact version of what they have now about 20 years ago and it was the best.

[@gravity1man669]

this is what ive been looking for in a multi tool for so loong the size it great and the grib looks likw my hand wont hurt after

[@Gooch072]

I have not seen a multitool that is worth carrying. The closest I've seen is the ones made with tool change out as a feature, but those usually cost enough for me to find better ways to spend that money, with Knipex being one of those things I feel is a better use of my money.

[@jwarehouse1]

That tool is a very nice size.....a lot of potential. Can't wait to see you disassemble it...and put in better implements...Keep blade...ditch everything else. Be interersting to see if Leatherman or Victorinox tools will fit. Better saw, file....91 mm Victorinox scissors,....maybe the awl from Farmer Alox that goes on the side of frame...a bit driver with a double sided bit...straight and phillips..... A tool this size / weight could be ideal...

[@danieljennagrouse]

I'd love screw extraction pliers in this form factor.

[@sergemarlon]

What tools do you think are mandatory for a screw extraction set? Electrician focused?

[@maxlvledc]

Omg..would be amazing

[@mcrobielord1503]

I just wish knipnex just makes their own multitool with their cobra plier head

[@CrowManyClouds]

NO!!!!!! Not a multitool, their plier head with folding handles.

[@B-RaDD]

I'll take either of those options

[@adjutant]

even though it was conceived as a gun maintenance tool. i would like to see it with a normal edc tool set. it looks really cool and neat as a platform, as you said

[@korgan7779]

Hmm, interesting design and certainly a good starting point for improvements as you've stated. It'll be nice to see what you come up with.

[@louishopwood3861]

Great review, I've just picked one up soley for the form factor as it's super-pocketable. Please keep us posted about any modifications you do.

[@the_swinging_axe]

Looks cool! I love the powerlitre and it replaced the skeletool cx in my pocket...but then I got the power access and it's all I carry. The one handed pliers are where it's at! Any other lightweight one handed options? I prefer pliers, file, knife, and drivers.....

[@wilshned]

Has an amazing form factor. If one side was a bit driver the other side had a blade, scissors maybe a pry tool or a file. I'd be very interested.

[@disciplebill]

Hard-core Leatherman fan boy here. Just stopped to say GOT-DAMN, THAT'S A COOL TOOL! Edit: Lol, after watching, I realized not everyone understands the purpose of a GMT.

[@maxlvledc]

as I've stated, in my pinned post... I could have done better..but still only 2 of the components are gun specific.

[@THExDUDEx8624]

I want , I want! 😂. Looks awesome.

[@Comm0ut]

That toy is adorable. The fastener diameter gauge is hilarious. I don't even want a free one. Tiny tools are bad enough without being nearly useless.

[@ericcook8422]

I do use a multi tool often. But I still carry the leatherman wave.

[@torenpm]

Would be cool if they emptied one side and put in a driver with interchangeable bits. Then the other side could have a blade, scissors and potentially an awl. I think weight would take a minor hit by that’s fine.

[@StevanOutdoor]

I like the slim profile but I don't own a firearm. If they would make one with a main straight blade, double sided file, 3d philips head screwdriver and a strong flat head screwdriver I would be interested.

[@jamesadowney]

This does look like an interesting platform for customizing. I don't pocket a multitool because most are heavy, but I'd pocket this if the tools could get dialed in. I don't EDC a firearm, so some of this stuff I don't care about. I'm not even that keen on a blade at all given that I'd still carry a knife. But this would be a cool platform to make an ultimate TSA friendly bladeless tool. I'm thinking adding a phillips, improving the flat, and getting a beefier file. I'd be interested to see what you come up with on customizing.

[@csmallstar]

I'd love to see what you come up with for modding this set

[@michaelbuddy]

beefy 1/4 bit driver, knife, file, prybar, combo opener. saw is nice too for whittling projects in woods. But for street use, not that important.

[@gapster77]

Not having a go, just noticed on a lot of American vids that you guys mispronounce Knipex? The K is silent, like in Knife or Knot. I’m a Spark in the UK, and I’ve used Knipex predominantly in my 25 years in this line of work. You can’t beat the German tools, they are so well made 👌🏻

[@maryhinge40]

Not been funny fella, but it took me 3 minutes to find out this is a gun maintenance kit.

[@paracop35]

😂

[@ThetaCreativeDesign]

Hi, I just purchased the 150 while visiting Portugal, I liked the size of it. I agree some of the tools are useless, which is where I would like to ask about the modifications you mentioned. Where can I find those mods, many thanks,

[@CharlesHeller]

It does not reflect well on the gun community when we make fun of someone who does a great job reviewing all kinds of stuff, but who may not be big into guns. A kind word turns away wrath, fellas... I find great value in seeing new things that I might not ever have discovered otherwise, even if I'm not going to go buy one.. I'd love to see Dom's mod, with a scissors, good file, bit driver, and a pocket clip. Keep the Serrated, lose the straight blade. Modify the end of the serrated blade with a hook cutter like the LM Charge. A bladeless TSA safe tool would also be excellent. This would be great in a bag you are trying to keep light for EDC, esp if you work somewhere where you can't carry a blade, but could leave a bag in your locker....

[@maxlvledc]

Appreciated, I was actually fine with all the gun specific stuff. I was more disappointed with the other tools in the kit.

[@preludedude07]

It’s a firearm multitool not a standard. That’s why the tools on it are different than your standard set.

[@johannestreitner9460]

Würde der typ eine Bohrmaschine erlären, muss er sich zwei Wochen Urlaub nehmen 😂

[@1on1c5]

Letherman K4 Free is the knife combo I carry daily.

[@triffh5956]

Hope they make one that comes with replacement blades for the wire Cutters

[@jwiz1911]

Love the size and form factor, but the rest of the tools would have to improve before I was ready to pay $50 for it. It would be cool to see more manufacturers produce tools with a steel frame and then plastic/G10/micarta "scales".

[@Chaosgoat]

I was just about to say the same, this isn't an EDC friendly tool, it's been designed for gun maintenance, not average daily tasks.

[@nycgags]

The power pint ROCKS

[@MichaelR-kl6hk]

The best small multitool I have and often carry on the weekend is the leatherman juice xe6 and its only ok. Would love something that size that you could pick and choose your tools.

[@sterkriger2572]

I hope the polymer is the same as what they use in their guns. BTW the weird implements are meant to be used in guns. GMT - Gun Maintenance Tool. A little of research would help a lot to understand what the tools are meant for.

[@greginthebox4975]

I missed the multitool reviews! Great video!

[@3wheelmannc860]

I am a solid Walther fan, but that multi-tool is multi-bad. Your thoughts are spot on. I do like the polymer/steel set up, but that tool set is terrible. Walther can and should do much better. Offer a steel @ 154cm and add a different/better tool set that continues that form and size and I'm in.

[@GC_4]

It’s a tool set for guns…hence the name GMT (gun maintenance tool)

[@kathleensmith370]

the mod will be interesting- I will stick with the powerpint for my edc multitool for now

[@mjnz]

If Victorinox made a sub-5 oz Spirit Mini with pocket clip, I’d happily pay minimum $80 knowing it would be top quality and have useful tools, even if it’s only 3-4 like you said. I’ll keep dreaming

[@Consumername]

Looks like a balisong. Pretty cool

[@rgdutch22]

That tool is ideal for a technician. For the pocket. Nothng greater than 24v DC. Small stuff. Not the bears you're trying to kill with a multitool.

[@mountainbearoutdoors]

Love the size of the tool, shame its not got anything I really use on it. Im still carrying an original leatherman PST, its perfect for odd jobs

[@MarlonOwnsYourCake]

I can't wait to see the mods, tbh.

[@TheMainMan.]

"I got a number of them" 🤣 Maybe consider doing a giveaway?

[@alltheseflavors]

Well that looks like a multitool I'd actually carry

[@soundknight]

I’d be interested on this if it had those tools you said. 3d Phillips, prybar flat head and a blade

[@mattyvlietstra5017]

Cool tool. I wish it had good scissors like the mini sailor

[@leodur13]

Looks like a great gun maintenence tool.

[@timmo971]

Someone who has over 100 multitools really misses the point of a multitool! Just kidding,.. I was really excited to see this at first as I’m passively searching for a lighter tool for my backpack. I’ve had a leather man supa tool for maybe 15 years but at 300grams+ I’d just like to get an ultralight something for the hiking pack. But this, after watching doesn’t quite tick any other boxes. I agree 100% with your summation. The Victorinox spirit X is at the top of my list right now but at 200g still a bit heavy although seems very functional

[@richmccullough]

So disappointing. I love the size and look. And then you opened it and it was such a let down. The pliers looked great and then failure for everything else. I was ready to buy 2 instantly when you pulled it from the box. I expected so much more from Walther.

[@heart4Pahoa]

Nice svelte design with so much potential. Would love to this with some much better interior tools. Could totally be marketed as a gentleman’s pocket multitool.

[@Imme...1]

Always with the ar for sure

[@J053GL3Z]

I hope Sog also watch and read the powerpint reviews and mods, beacuse with a better scissor and flat screwdriver it would be perfect