New parts for the BMW F30 328i N20 600HP+ Build! Almost there!

[@gagedraper2086]

love the build its rare to see someone build a motor on these

[@fantasy11222]

N20 is capable of a lot on stock internals regardless of what people say. Can not wait to see the final product.

[@Average.N20]

100% is low end torque that kills these motors. A nice low torque high hp tune and your golden. I know plenty of people pushing close to 400 wheel full e85 and big turbo and are running that for tens of thousands of miles

[@IDRC3000]

hey man, just wanted to say nice job! really respect the way you are doing and improvising stuff. i have '14 328i and almost thinking of going crazy the same way you doing. however in my country getting parts and stuff is really tough, I'll be here watching your build and learn from it for when my turn comes.

[@projectrandomCO]

Thanks for watching! Even if I had all the money, I would still build my own stuff. It makes it unique and a lot more fun!

[@IDRC3000]

@@projectrandomCO totally agree, I'm bored of seeing people just adding bolt-ons and calling it a "build". really excited to see how the turbo comes out.

[@prod.flippa2177]

I’m glad I found this series I really enjoy these videos I have a 2015 328i and I want to do something similar I hope all this works 🎉

[@projectrandomCO]

That means a lot man I appreciate it, I hope it works out too haha. Just ordered my turbo! All I need is to weld up the kit and get the tune and we are back up and running.

[@Rellderrick777]

@@projectrandomCO how much Hp are you expecting after that? Also I’m thinking about doing something with my 2015 328i if I blow it I’m going big turbo 5.3 or 6.0 cam etc

[@projectrandomCO]

@rellderrick3682 I have a big ass turbo in the mail (7875). Once I get my kit done I'll start with 500-600 and see what breaks, if it holds ill probably ride that for a little while and then turn it up. Car is fully built.

[@Rellderrick777]

@@projectrandomCO you motivating the people putting the big turbo on the 2.0💯

[@cribwalkgenetics9826]

I phantasized about the Vband flanged turbo and you’re out there just doing it. Much respect bro, I wish you all the best. Would you mind telling me what turbo you’re planning to run? I guess like a GTX28 or something?

[@projectrandomCO]

Hey, I went with a big turbo from aeroflow performance. 7875, 9 blade t4. Supposed to spool well with a 2.0, going for efficiency Soni don't have to over rev a smaller turbo. I am upping the max rpm by 400-600 to help with spool. We will see

[@delanogordon6572]

I cant wait till its done i am working on my and hopefully i can make 500 whp

[@projectrandomCO]

What all do you have done? Shoot me some pics! Email is on my profile

[@Datgrey.niteF30]

What have you done?

[@bigboyztv8104]

Really looking forward to this build bro! I was curious if once your done with the kit and everything is running solid if you would fabricate another kit and I would buy it from you for my 320i that has the same n20. So sad to see that nobody sells a top mount big turbo kit for this car that can handle more power than some WRX.

[@projectrandomCO]

Oh man lol, I don't think this kit is going to be anything anyone would want to buy, but maybe in the future. I just want to see if this all works first, then I'll see if I can put something more reliable together.

[@Datgrey.niteF30]

Im really stoked in this. I want to do the same and push at least 500, I just got my catless dp

[@projectrandomCO]

Sweet, I have no guarantee if any of this will hold up but that what I am here for. I plan on breaking a few things and rebuilding a lot to help everyone with the N20 try and figure out how to push this and how far. I had every bolt on for a few months minus a bigger turbo, definitely fast on the low end but falls off at 5-6k rpm and past 60mph. A built block or at least pistons is a must for anything over 300-350. A full list of mods and how I did it all is on the website if you haven't checked it out yet!

[@Datgrey.niteF30]

@@projectrandomCO no I haven’t seen it, so I’m going to take a look at it. I saw another company that’s building the car but it’s a Darton sleeves block and it’s on meth with nitrous and I’m like yea I don’t have that type of moneh

[@projectrandomCO]

@@Datgrey.niteF30 I probably won't go nitrous but will get a meth/water kit just to keep temps down. You can get an injection kit with one or two nozzles, most aftermarket intakes have the ports on them already. Kit is $500 ish and can be set up to inject by boost so you aren't squirting when just cruisin around. The juice is pre mixed and really inexpensive, $60 or so for 4 gallons.

[@Average.N20]

@@projectrandomCOnot true it’s low end torque that kills these. Plenty of people on stock everything pushing 380-400 wheel reliability and safe.

[@projectrandomCO]

@Alpine_N20 I'm not saying you are wrong, but I'd like to see a dyno with a 400hp n20 that hasn't had to be rebuilt and runs reliably. Even my own car had a popped piston when I bought it, definitely pre detonated but that happens with any setup, the stock cast pistons are weak. Ran into the same issue with my STI, cast pistons won't hold up unless your tune and setup is absolutely perfect. One misfire and you are bending/stretching a rod or blowing a piston.

[@TylerF30]

Extremely interesting in this as I have talked to navardi tuned and they stopped progress on there turbo manifold and iv been trying to figure out how to get my spare g25-550 on my 13’ 328i to turn it into a drift car

[@projectrandomCO]

I'll have a video up soon with the kit being built. I started it the other day with my crappy welder but it wasn't cutting it. The new welder will be here Friday so I'll probably be working on it this weekend.

[@TylerF30]

@@projectrandomCO also have been looking into cutting off the flange that bolts to the head and cheating a mid mount setup like the b58 so it can have more clearance away from the motor mount with a v band charge pipe for the turbo on the upgraded charge pipes ?

[@bigbadwolf2075]

LETS GOOOO

[@christopherparham-l8t]

Can u build my f30 b48 engine

[@projectrandomCO]

Hey, I can definitely help guide you along, but I wouldn't feel comfortable doing it just for liability reasons. I'm in Colorado but don't mind traveling if you are serious.