New Penn Slammer 4 IV vs Slammer 3 & older generations

[@stewie5101]

Most of my fishing is freshwater and I have 5 of the original slammers. They’ve never let me down. They’re such a simple and well constructed reel and I think that they’re the best value for money reel by far. If I see them come on special in the future, I’ll buy another 5 of them. They’re that good.

[@eaglesdurose3753]

Thanks for the video! Im still using my 260, 360 and 560 bought many, many years ago and haven’t had an issue yet. I do like the look of the new slammer 4 though and might pick one up just for the hell of it. Thanks again!

[@Nathan-qs3yl]

Best out of the box review I've seen on the Penn slammer 4

[@fishingmad]

Thank you !! Glad you enjoyed it.

[@Meditation409]

Those reels can handle anything!! They are very strong reels!! 🤩💪❤️

[@PicaNoPicaFishing]

Already bought a 4500HS and 8500DX Slammer 4. Just waiting on there release/shipping sometime this month cant wait. Great video much love from the Florida Keys

[@fishingmad]

Awesome, so good to get comments from Florida Keys. I'm sure you will like the new models, I'm pretty excited about them. Were still in lockdown so I cant wait to get on the water and test them thoroughly.

[@chrisjones720]

Lucky you . I have a Penn battle III DX 3000 I love it . Pulled in some monsters with that reel . But I love the DX versions of the Slammer IV’s

[@leslyons2723]

Never had one Alan might look into them one out of lockdown another great video yet again

[@fishingmad]

Thanks Les !!

[@teonggoh9710]

Thanks for that mate I had the option of getting a 3 Vs 4 today for 70 bucks so happy now I went for the 4!😬 Yesssss! I got the 10500 for trolling I'm so excited

[@fishingmad]

Glad I could help. That sounds super exciting

[@dn25crow71]

Nice reels, I was looking around to buy some penn 760 maybe...

[@jimbo4612]

enjoyed the trip down memory lane and many good years with Penn. From the info I got from Penn regarding The Slammer lll, the reel was optimally designed for tossing lures vs bait fishing. Optimal applications being lures in the heavy surf, lures off the jetty in rough waters, and for vertical jigging off a boat and kayak. Bait anglers particularly live bait anglers found the minimal drag setting perhaps to tight. As noted by the massive drag, the target species were also large fish where the tighter minimal drag would not be a huge concern. That being said, I have seen this reel used for everything even for throwing a crab snare, used to snag paddlefish and that type of fishing and downrigger fishing. Lots of applications where the minimal drag is not a big issue. With The Slammer 3 there were a few heads up including the top plate with hydrophobic and for those doing self service not to grease. Slammer 3 can be found for $150.00 range and for the features its quite the deal considering the Slammer 4 is $350 at best at top discount stores

[@fishingmad]

Brilliant comment, thanks for sharing some insight

[@Doodsy1975]

Brilliant video mate. Love the comparisons of the older models. Really well put together.

[@fishingmad]

Thank you Darren !!

[@Bronco2Cj]

@@fishingmad What kind of rod would you suggest matches the Penn IV Slammer 6500 or especially the 7500?

[@ronmb81]

Great review, I thought maybe you needed to add the weight comparison but a quick google search I guess could solve that! Your content is exceptional and your channel is so underrated... you deserve way more than 15.1k subs IMO 👍

[@fishingmad]

Thank you so much for the kind feedback, its really greatly appreciated. The weight comparison is a strange one as I've spoken with Penn directly and im assured that the updated rotor design has made the new slammer 4 reels lighter yet when you compare weights from slammer 3 to slammer 4s there about the same, yet in the hand they somehow feel a tad lighter. Thanks once again,

[@matthewlee1383]

The drag clicker on the original Slammer is by far the best, The metallic 'ting' it makes on each click makes it sound just so beefy. The other 2 sound too plastic-ish. Wonder how many anglers upgrade or select reels based on drag clickers. On that note, the new Daiwa 21 Certate drags are something else. Thanks for the upload Alan, keeps our sanity levels slightly in check.

[@fishingmad]

Thanks Matthew !! Yeah I find it amazing how the drag clickers on many of the older reels are often louder. I must admit i often check the drag sound as it does make the experience even more exciting listening to a reel scream. Thats really good to hear about the 21 certates as a few have said the drag sound on the certate LTs were very quiet.

[@ynots0625]

Slammers are great just recommend the knob neoprene knob for cold mornings on the yak chasing snapper. Great vid Alan as usual

[@fishingmad]

Thanks !! Yeah great advice. Should start warming up soon so hopefully wont have to worry about using the spare handle until next winter chasing some gummies.

[@jaredbuttigieg]

Awesome review Alan 👍🏼. I might pick one up for the surf

[@fishingmad]

Thanks Jared, yeah I must admit I was really impressed with it. Would be great for the surf.

[@viks2009]

Thank you for the good content. Helpful.

[@fishingmad]

My pleasure!

[@billybastar4022]

Loved the video. I love me some Slammer IIIs! One of the best reels I have ever owned. Bro, what restrictions to go outside on a boat? Our governments have lost their minds, or are drunk on power. I can’t believe your country has so willingly given up your freedoms. I look forward to you guys finally saying enough is enough..power to the people!

[@raj1634]

Hello mate can't decide between slammers and saragosa which one do you think is better.

[@harrygoodenough]

Just bought one for my first beach/rock setup. I got a 5500 and a 9”6 prevail 2, best review of this reel I have watched. Keep up the content

[@fishingmad]

Thank you !!

[@FishingWithMichaelTruong]

Very awesome review mate well done :)

[@fishingmad]

Thank you !!

[@sunshinecycling]

Where did they add the extra bearing?

[@eduardosoto6997]

Great video man!! In my opinion, if you already have a Slammer 3 That’s works good, I don’t see a reason for you to switch/upgrade to the Slammer 4. It’s literally almost the same thing just in a redesigned body/chassis. That’s just my view on it lol.

[@fishingmad]

Thanks for the comment !!

[@АлексейШнайдер-х1ш]

Добрый день)вы думаете нет смысла покупать Slammer 3 ?

[@813Tyler]

@@АлексейШнайдер-х1ш if you already own a slammer 4 I would not buy a 3 if you own a slammer 3 no need to only somewhat good difference is 2 more ball bearings.

[@АлексейШнайдер-х1ш]

@@813Tyler Спасибо за совет)С Новым годом!!!Всех благ)))Привет из России!!!)))

[@victorbitter583]

Geez they look the goods and that drag rating is off the charts. My cousin's husband has lived his whole life on the water. a mad fisherman who owns 3 boats. He has used and abused every reel there is over the years and the only ones he uses now is Penn. Has been using them exclusively for years. As you know I am a mad Shimano fanboi but geez, this does make me want a Penn. Anyway, I'll wait n see what the future holds before I but one. I may never be allowed to go fishing again cos i sure as plop am not having the l------l=====>----- ~~~~ . cheers Al.

[@fishingmad]

Thanks !!! All brilliant points that you make and I believe that 100% with your cousins husband. Yeah I have used the Penn reels off and off for saltwater and have a few mates who use them regularly. I've always been a massive Shimano fanboy for any saltwater offshore reel, but these Slammers are really good. There a tad heavier than some of the competitors products but in return there all metal construction and the drag capacities are crazy good. .Thanks for watching and the excellent comment.

[@markmoseley5503]

Great video Alan, think I might have to buy one 😀

[@fishingmad]

Thanks man !! Yeah they were super impressive. You 100% need a couple of bigger reels when we chase the gummies and kings. The 6500 is a great size for that. The Slammer 3s are also selling super cheap at the moment and also worth a look.

[@ridgecotting2367]

Can’t decide if I want a penn 4 or 3

[@andrewmorke]

I might be mistaken but it seems like Pure Fishing is ceasing production of the big Fin Nor spinners such as the Offshore range. Makes sense. Fin Nors just cannibalize sales from the Penn Spin Fisher and Slammer. If someone loves the stainless gears they can now go with the DX Penn reels instead.

[@Sam-xn7zp]

Another great video. Quick question, is the drag plunger inside the knob that presses against the spool when you tighten up the drag still plastic?

[@fishingmad]

Great question Sam, When i took the spool apart to check it out the drag plunger is directly under the inside of the drag knob, which makes it a little tricky to get out and remove the spool. If you need me to send you a photo let me know or email me at [e-mail]

[@Sam-xn7zp]

@@fishingmad thanks for the reply Alan. The plunger being plastic is what put put me off the slammer 3 in the heavier models as I didn't trust the abilty to disperse heat and then bind under high drag pressures. I went for the Gosa as they aluminium and disperse heat when under high pressure. I was hoping they had gone for aluminum in the 4.

[@fishingmad]

Yeah the drag plunger looks the same in the slammer 3, so that obviously hasn't changed. I have a Gosa SW aswell and rate them very highly.

[@damianlarsen3672]

Great review. Looking forward to seeing if it has fish attracting abilities when you get it out on the water

[@fishingmad]

Thanks, I certainly hope so

[@hownowbrowntrouttasmania7389]

Can you look at you part manual and see if they have put a bearing under the pinion gear in this new 4. cheers. the 3 didn't have it.Cheers😊

[@alsulaiti]

I was planning to get the Battle 3 DX, just saw this now and wondering on the comparison between them both?

[@fishingmad]

Hi Al, yeah it is an interesting choice between the 2. Both rugged, good water proofing and good drag capacities. Much will come down to cost and personal preference on look and feel. I was pretty impressed with the slammer 3 and 4s and would prob just lean towards them.

[@alsulaiti]

@@fishingmad thanks for the great video and feedback! 👍🏼

[@brendanjames1158]

Hi Alan, thanks for video mate. Just wondering when you unbox the reel, it’s there suppose to be a screw for the cap on opposite side of handle? I found that when you set the reel up you can just wind backward and hole reel comes undone? Is this normal? Cheers 🍻

[@brendanjames1158]

(Normally there is a screw or anti reverse so you can stop the wind back motion)!

[@marioscarpuzza9810]

Hi Alan nice video about those reels. I like Penn reels even if I don't have any. Maybe because I find them too heavy for my liking. But nice machine anyway, maybe one day I will change my mind on these and buy one for serious fishing. Ps:do you make any reviews about Daiwa reels???thanks in advance and happy fishing. 😃💪💪🤗👋👋

[@fishingmad]

Hi Mario, thanks for the comment !!! Yeah I only have a few Penn reels as they can be on the heavy side, when you take the reels apart you start to understand why there heavier as they have full brass gearing, and full metal construction compared to some that use cheaper or lighter materials. Because of that they will last longer. In tersm of Daiwa reels you can browse through the channel and see i did a review on the Sol 3s, Luvias, and Infeet Rods. I did have plans to look at the certate SW and revelry but with lockdowns Im quite a bit behind at the moments.

[@alexpadilla9870]

hello, one question, there are some penn slamer iv in alie express at a good price, they are original

[@heathbonnici6972]

Brilliant review well done, They do look very impressive, might be time for an upgrade LOL

[@fishingmad]

Thank you, yeah i think since 2016 they make a pretty worthy upgrade

[@youssefelmohamad5609]

hi do you know any flathead fishing spot around Williamstown

[@fishingmad]

Hi Youssef, Much of Williamstown is reef, you will have more success on flathead closer to Altona on the sandy flats

[@nicholassabella8338]

How long does the rubber seals last and how long before you have to change it

[@kresnobaskoro8923]

Di antar ketiga itu paling bagus yang mana ya trimakasih

[@marioscarpuzza9810]

Thanks Alan for your reply, very much appreciated. Probably I did missed out the previous review on Daiwa products. I will give a look asap. Ps:I would like to contact you in private if you don't mind thanks in advance ciao ciao have a good day 😃🤗🤗💪💪

[@fishingmad]

No problems Mario, feel free to contact me directly on [e-mail] Cheers

[@vsonic86]

Can you use line roller bearing slammer 4 5500 on slammer 3 5500? My slammer 3 5500 is having an issue with line roller bearing. I want to use to slammer 4 line roller bearing since it is new and improve.

[@FranciscoRodrigues-rk3qf]

When this penn slammer 4 coming to uk?

[@fishingmad]

Hi Francisco was supposed to be global release this month, so they wont be to far away.

[@FranciscoRodrigues-rk3qf]

Thanks bro counting on its.

[@jaishi...1426]

I am happy with my slammer 3...3500 ...😊..

[@fishingmad]

Yep, there great reels. And last ages too. Those smaller sizes can tangle with some decent fish

[@jaishi...1426]

@@fishingmad yes I catch sea bass with it ..only in the Netherlands we do not have huge fishes ...😔

[@carlossantos-es3gq]

Penn Slammer iv VS Shimano saragosa ...what win?

[@calallen8786]

Gosa all day man

[@andym2097]

How so? I'm interested in both

[@jpap967]

4 high speed options not 3, you forgot 8500hs 🙂

[@vijoykv5136]

Rate??

[@bestdragons6082]

Hello Alan, Nice review. I need a little help :) I want to buy new Penn Slammer reel for tuna fishing, but hesitate between two models, Slammer III 8500HS and Slammer IV 8500 DX. My question is about braid capacity, this info from internet about slammer III 8500HS is true? Can spool with 760 yards of 65lb braid, this is awesome capacity? When i check regular model Slammer III 8500 braid capacity is 555 yards of 65lb braid? This mean that is not same spool size on 8500 and 8500HS? I would be grateful to hear your opinion, which model best to choose. Braid capacity for diferent models: 1. SLAMMER III 8500HS Braid Capacity yd/lb:955/40 805/50 760/65 2. SLAMMER IV 8500 Line Capacity Braid (yds/lb): 730/40 • 600/50 • 555/65 3.SLAMMER IV 8500 DX Braid Capacity yd/lb:730/40 600/50 555/65 Thanks in advance!

[@fishingmad]

Yeah the specs for the Slammers are pretty crazy. Thsi is the specs they have advertised www.pennfishing.com/products/slammer-iii-spinning-1403987?variant=34036244709516 and the line capacity on all models is very high. I have the 6500 and can fit about 300M of 40lb no problems and the 8000 are significantly bigger and more capacity. In terms of HS vs normal vs DX sometimes you really need to go into a tackle store and feel for yourself. I would say that the Slammer 3's are going for bargain prices right now and there isnt a huge difference between the 3 and the 4, so thats the best value option. The DX still not available in many countries although they have slightly higher specs

[@pakde8002]

Has Penn released his dog yet? 😂😂😂 Just joking. I'm also a big fan of Penn products and it's a great review but after hearing that your Slammer III has performed so well I might try to pick one up at a discount. My budget has only allowed me to buy the fathom and fierce price range but as you point out the value is there and considering one purchase last possibly for decades it seems more reasonable. Thanks.

[@EziRifle]

When available in indonesian??

[@fishingmad]

My understanding is that they will be released globally over the coming month, so they shouldn't be far away. However COVID has stalled deployment in some areas.

[@EziRifle]

@@fishingmad ok thanks..

[@fishingmad]

no problems.

[@tasmizitas1319]

Why everyone always review only gold not dx. Did dx not good ??

[@fishingmad]

I touched on this towards the end of the vid, the DX models not available in Aus when the video was made, so not sure on their release date

[@jordanrose8764]

I own three of the original slammers all live liners and the only con is on the 560LL v Has not so good line lay but my 760LL does just fine I also have a slammer 3 3500 and the only con to it is that they make no live liner in it🤷‍♂️ So why are baitfeeders not worth making anymore at one time penn made a half a dozen liverliner reels now they only make two🤦‍♂️ im not too happy with where penn is going with this and I will not own another spin fisher 6 so I only go with the old slammer live liner or an Avet leverdrag mc conventional reel

[@ryanharris6776]

I use to like Penn until I realize all their new release are pretty much the same as the old ones. Unlike Shimano and daiwa that actually redesign the entire series. I'm now all daiwa and shimano

[@stephenhusak6098]

Many of us asked them to improve the small amount of flaws on the slammer 3. The company listened to us and gave us what we wanted. I call that brilliant customer service .

[@jacojonker4312]

@@stephenhusak6098...Penns biggest problem is Quality control.

[@calallen8786]

I'm always stand by shimano product's. Penns I got to much issues with them. Only penn I touch is conventional

[@DaveMars0]

I need a Shore Jigging Reel for my Majorcraft Solpara 1002H rod 60-100g. What reel would be better between Slammer 3, Slammer 4, BG MQ, Saltist LTD or Saragosa SW-A? And what size? I would put at least 300m of 40lbs PE3 Braid.

[@fishingmad]

Majorcraft Solpara 1002H rod 60-100g is a really nice rod, out of that list I would recommend either the Slammer 4 or Saragosa SW-A. I find the water proofing technology better in those reels, and they feel really nice in the hand. You could also consider the new twin power which is also an excellent choice. I use a 8000 and 100000 size quite a bit but thats jigging for species like kingfish. I hope that helps

[@DaveMars0]

@@fishingmad thank you so much! What size of reel would you suggest me?

[@fishingmad]

What species of fish are you jigging for ?

[@DaveMars0]

@@fishingmad false albacore, amberjacks, dentex, bonito and tuna (this will be my main target due to I had a good spot for that). I’ve thought to put at least 300m of 40lbs braid Pe3 0.28mm

[@fishingmad]

Thats sounds super exciting in that case I would 100% go with the bigger model reels either the slammer 8,500 or 10,500 which would cover the 40lb and 300m of line no problems or you could even go up the scale to something like a Saragosa SWA 14,000 or 18,000.

[@Well_Edumacated]

not worth the upgrade; i really didn't understand what Penn was doing with this release. Unless Penn haven't released all the information the Slammer 4 is pretty much identical to the Slammer 3. I'll wait and see if they change anything with the Slammer 5. i think i would've destroyed my Slammer 3's by then.

[@Nofishnoclue]

I think the main allure of the slammer 4 is the smaller softbait reel sizes and perhaps the dx veesion

[@vaskodimoski5690]

Slammer 3 and 4 hardly a difference not worth the extra money stick to the 3 get them really cheap at the moment

[@stickypaddle6432]

errr.... so after checking the differences between the two here is a list of differences weight saving 0 more drag 0 (but has a lighter drag setting) bearing +2 more looks different 2500 size price for slammer 3 3500 $300 10500 $380 price for slammer 4 3500$380 10500 $550 price in AUD internal differences unknown haven't been able to take one apart yet advice buy slammer 3 second hand after Christmas

[@Ozbullwinkle]

Or if you are in the market for one of the large models there are some great deals around on the III's. My local tackle store has the 8500HS for $299 & the 9500 for $319.

[@RobertTaylor-vd2mw]

Maybe a good vid but the music kills it .. When I watch a review of something mechanical I want to hear the target not some grunge music ....

[@menisorobertsunggam9393]

is this genuine american made? most penn brand reels in malaysia are made in china and this really upset me.

[@kanchanakumari7539]

ALLOYM2109

[@SaltyPirate71]

"Penn Slammer 4 IV"? 🤔🙄