New race 1.9 tdi pd ARL engine project 2024 build Time-lapse

[@Cuneiform585]

Superb Rar mai vezi TEHNICIAN auto, in mare parte e plin de schimbatori de piese care nu au tinut niciodata o dinamometrica in mana. 2 intrebari am, daca esti amabil: Tachetii sunt mecanici? Ce marca de ulei folosesti? Merci

[@WRCgarage]

Salut si mulțumesc, tachetii da sunt mecanici iar ulei eu personal numai motul specific norma pd 505.01 am folosit.

[@Cuneiform585]

@@WRCgarage multumesc, mult succes in continuare

[@bashkimskuqi3413]

Bello ❤️

[@man-fit7568]

@@WRCgarage Es que vous avez un document de tout les couples de serrage de se que vous avez monter sur cette vidéo. merci beaucoup ?

[@WRCgarage]

@man-fit7568 Just check my other videos as i have the torque specs on them

[@d.martins4471]

the first guy in youtube assembling an engine realllllly properly and the first guy assembling an engine which i dont have anything to criticize. congratulations!!!!!!

[@WRCgarage]

@@d.martins4471 Thank you !

[@bvcvcc1289]

@@WRCgarage Just built my first engine with lots of lessons. This is by far the best video i found so far with all that lessons in it. After watching this i dream engines! Thanks!

[@joaomoreira5583]

Amazing, seeing someone doing such a clean job.... wish everyone was like this.

[@ViiralDzn]

miss my 1.9 tdi pd, solid motor never ever gave me problems lol

[@StraightRazWhor]

Love how the valves showed up magically

[@p.s.2795]

Kawał solidnej pracy, gratuluję

[@ShiroArctic]

These 1.9s sound surprisingly good, honestly. I have a friend who drives a straight-piped Mk 4 with the ALH engine, and it actually sounds really good. He's working on getting a proper exhaust to really dial in the tone.

[@WRCgarage]

Have a look on my Tiktok to hear it on street... www.tiktok.com/@wrc.garage?_t=8koshDJ18FM&_r=1

[@ODB_]

​@@WRCgarage got it posted anywhere else?

[@zacnixon4579]

quick tip, use the digital vernier upside down when making a height measurement (piston protrusion). trust me it works rather well

[@WRCgarage]

Awww, is it nice in the school bus ? 🤣🤣🤣🤣

[@tuomas1754]

@@WRCgarage wtf is wrong with you

[@WRCgarage]

Nothing, why ?

[@tuomas1754]

@@WRCgarage he was giving you friendly advice and you mock him for no reason.

[@MooohMoooh-lr1np]

C'est un moteur puissant avec peu de problèmes et peut résister à tous les problèmes. Merci, Allemagne

[@szymon6207]

gaah. WHAT'S B4RE NEXT ?

[@Justiceandlaw]

Clean, perfect,accurate and quality job...

[@that_escalated_quickly2720]

Just a machinists tip for measuring the distance from top of the piston to the deck with calipers, use the front of the calipers, instead of the depth-gauge... U can use the bigger surfaces on the front of the calipers (exactly opposite to the depth-measuring-rod) to measure shallow depths much more reliably...

[@WRCgarage]

Hello mate, i just use it to get a near reading as i always install a 3 hole gasked, but just to make sure its not over the 3 holes size i use the caliper.

[@that_escalated_quickly2720]

@@WRCgarage ahh ookay, calipers are not that exact to begin with, so I suspected it was just a quick-check... Nice build! Cheers from a german 1.9 AVF quattro driver 💪🏼 love to see some quality 1.9 content

[@WRCgarage]

@that_escalated_quickly2720 Thank you, i will buy for the next time a special depth caliper as that will be more precise.

[@РондаревОлег]

​@@WRCgarageЗДРАСТВУЙТЕ КАКУЮ СМАЗКУ ВЫ ИСПОЛЬЗУЕТЕ НА БОЛТЫ ГБЦ, РЕЗЬБУ МАЖИТЕ КИСТОЧКОЙ, КАК СМАСКА НАЗЫВАЕТСЯ

[@WRCgarage]

Hello, its ARP assembly grease

[@SaitoGits]

Hell yeah old´s school style Diesel tune!

[@robertoudokrapf453]

OLÁ. Na referência de velha escola Sr Saito, lhe informo que o desenvolvimento dos atuais motores Diesel silenciosos tem muito a ver com meu trabalho. Não estou competindo com ninguém, jamais tentaria ver quem es

[@phoenixguy6461]

That's how satisfaction looks and sounds like 😍

[@WRCgarage]

@@phoenixguy6461 Thank you !

[@ViniciusLimadosSantos-b9b]

Trabalho bom profissional tem pessoas que fazem o serviço tudo lambuzado as vezes nem presta .bom trabalho amigo vc e uma inspiração pra fazer um serviços de ótima qualidade

[@kittidet1983]

Thanks!

[@WRCgarage]

Thank you ! 🙏

[@V12BHP]

PD engines run forever.

[@tukenmezkalem5367]

Mekanik atölyelerde artık bu şekilde motor toplayan formenler kalmadı,kural dışı yapılıyor,kompenatör anahtarı, dinamometre, kullanmadan motor toplanıyor; buda kısa ömürlü oluyor sen harika bir formensin

[@WRCgarage]

@@tukenmezkalem5367 Thank you 🙏

[@zekimolla3078]

you are mental bro ! big respect to your knowledge indeed ! :)

[@WRCgarage]

Thank you !

[@stilianivanov6328]

Браво Майстор си!!

[@MecaniculFLO]

bravo , daca mai sunt multi ca noi servisurile inchid bafta

[@WRCgarage]

Mulțumesc !

[@ka7ao]

Nu mai fii rau cu astia, mai zic si ei una alta asta cu gemul de capsuni a fost tare😂 frumos clipul. Am avut un 1.8T APP..fenomenal motor. Succes

[@WRCgarage]

Eu incerc sa nu fiu rau dar e greu frate cu cate unii, eu incerc in clipuri sa arat anumite chestii, secrete, etc, si ei imi spun ca era mai bine asa sau invers etc si deviaza de la subiect si mai rabufnesc câteodată.

[@anwaraz1712]

❤I like these jobs very much

[@anwaraz1712]

Excellent I love this work ❤

[@ceReal-p2iiiiiieater]

Excellent

[@ГульмираАткалиева-б1ш]

Превосходно !!!👍👍👍👍👍

[@MrOwnerxD]

very nice

[@leeisenberg]

Thanks for sharing. I've got a 2006 1.9tdi PD, 230,000 miles. Not running well right now, think I may have a bad vacuum leak or something. - take care

[@WRCgarage]

@@leeisenberg ARL is the engine code for 150hp, the most stronger blocks on them are pd130 ASZ, and pd150 ARL

[@Bread_45]

Great video for a great engine. Any idea what the power/torque will be?

[@WRCgarage]

Hello mate, i had @330hp and @600nm before to change the new ported head from veicomer with same turbocharger, so now it should be @350 wheel hp, i'm gonna do the measures after i do the DSG conversion in May as after upgrade i broke the manual gearbox wich is very weak on the 4th gear so that 4th gear gone now, and decide to go for dsg, ive got everything now bought just need time to do it, so in May hopefully ill post a full dsg conversion video.

[@dnjpadyo9415]

What type of oil do you put on the head gasket? Is the tightening different from the recommendations when the cylinder head studs are lubricated? Thanks.

[@WRCgarage]

Just normal engine oil but you dont have to, the tightening pattern is same, the studs in video are special studs for racing, they must to be greased

[@dnjpadyo9415]

@@WRCgarage Thanks a lot, have a good day !

[@bvcvcc1289]

@@WRCgarage I think he meant the torque. I've seen several videos about the subject and it turns out you should lower the torque about 10-15% (sometimes more) compared to torqueing without oil. But most torque values are based on lubricated threads.

[@WRCgarage]

@bvcvcc1289 Exactly

[@jadenrichards9270]

hey I am 17 doing my first engine I have a BRM engine code do you have any tips on how to find the specs for the bottom part of the engine or on how to get everything in the right diameter

[@WRCgarage]

@@jadenrichards9270 Hello mate, you should check my other videos as i have many with more details

[@scaslin2009]

Nice, but did you check the bearing clearance on caps and rods? The last thing you need is a spun bearing.

[@WRCgarage]

@@scaslin2009 Thank you, no i haven't, the crankshaft and caps are stock and good bearings brand it won't be any problem, these engines don't have problems with bearings spinning like some bm's, i did few race engine's and never had an issue with bearings, but yes you could do it if you not sure but i know these engines very well and i trust them 😅

[@brunodias6120]

why oil the gasket? Any advantage on that?

[@WRCgarage]

I like to do that but i don't think is any advantage just it feels like it will seal better if any dirt will fall there when installing it.

[@FlorentinaAirinei]

Bună ziua! Pastile din capul tachetului mecanic se poate schimba și la cele din gama vag? Mulțumesc.

[@WRCgarage]

@@FlorentinaAirinei Numai daca sunt mecanici se pot schimba, daca sunt hidraulici se schimba cu totul

[@FlorentinaAirinei]

@WRCgarage Mersi.

[@marekmarecki3500]

is there any way to deal with swinging unit injectors? My O-rings are wearing out, I already have brass sockets and it didn't help. ASZ 270hp

[@WRCgarage]

Just new head probably

[@nostalgia46]

Step 1, insert the crankshaft bearings. Step 2, slather strawberry jam evenly over bearings. 😂

[@WRCgarage]

Awww, how it's the view from the school bus ? 🤣🤣🤣🤣

[@nostalgia46]

@@WRCgarage It was a joke bro, chill.

[@Aweburn82]

That's red Loctite.

[@michaelm6364]

Organic only!

[@Resistculturaldecline]

Raspberry, not strawberry

[@malagagarage1102]

Hello WRC garage, I have a quick question, what injection fuel pump did you use and what injectors, everything standard?

[@WRCgarage]

@malagagarage1102 Hello, just check the description, everything on the engine is there

[@malagagarage1102]

@@WRCgarage ok, I'm sorry and thank you, I should check first

[@alexandrunacu3552]

Salutare la ce cuplu ai strans pielele forjate?

[@WRCgarage]

@alexandrunacu3552 Salut, vezi ca am clip cu montajul, vezi si tu acolo ca nu am timp sa ma uit acum

[@pezo-je-bog]

May I ask what is the knocking sound after you turned on the engine. Something similar is happening to me but only when the engine is cold. And when either I rev it up to 1500 rpms lets say, or let it warm up a bit it stops. What can be the cause of it.

[@WRCgarage]

@@pezo-je-bog That's the single mass flywheel sound's like that when i release the clutch pedal

[@pezo-je-bog]

@@WRCgarage So it means that is worn out and I should replace it right? Thank you for the response

[@WRCgarage]

@pezo-je-bog That may be the dual mass flywheel that gets broken and makes noises. The single mass doesn't break but makes noise all the time at the gears.

[@pezo-je-bog]

@@WRCgarage But why does it stop when I pump up the revs or let it work a bit in idle

[@WRCgarage]

@pezo-je-bog This is what it does dual mass flywheel when its gone

[@IsaacKofiArthur-od6bb]

great video!!!

[@anwaraz1712]

Excellent engine rebuilt

[@WRCgarage]

@@anwaraz1712 Thank you !

[@CompressedSoup]

Why were the piston pins oiled instead of assembly lubed?

[@WRCgarage]

@CompressedSoup It doesn't matter wich one you use as long as you use some lube, the oil it's a bit thinner than assembly lube and you oil it just to go through easier.

[@nightmare-pn8mx]

Hi! I really liked your video and I had a lot of questions. I'm always very careful about cylinder head bolts and I'm wondering how you lubricated them. And the second thing is why did you lubricate the gasket under the head and for what purpose?

[@WRCgarage]

Hello, the head bolts were gresed with arp assembly grease wich is special for that, and the gasket i oiled with engine oil just for a better contact, its not necessary but i like to do it as i feel better in my mind 😅

[@nightmare-pn8mx]

@@WRCgarage one of my friends also lubricates the gaskets with oil, but not with engine oil, but with transmission oil. he says that in this case it is easier to clean it off when removing it

[@WRCgarage]

To be honest i never had any dirt left on the engine when i removed one so it may be a good point, but i do it with new engine oil just because in my mind it feels that it has gonna be a better seal contact when i tighten the cilynder head.

[@randomstuffwithporgy3879]

What was the part number for the rods? Would love to upgrade

[@WRCgarage]

@randomstuffwithporgy3879 Hello mate, just go on their website ProRaceEngineering and you will find them there, dont know any part number

[@xoancabado]

why did you take measures of the piston rings? i have seen it many times on other rebuilds but i dont know why. If it is out of range, do you replace the rings or something?

[@WRCgarage]

@@xoancabado They have some specs in the repair manual and they must be in that specs, if they are "out of range" you just grind them untill they are in specs

[@mecanicamator5426]

Te salut cu respect, o întrebare as avea, la suruburi normale pt chiulasa de 1,9 care ar fi cuplu de strângere??merci!

[@WRCgarage]

Salut, sunt 4 pasi: 40nm, 60nm, 90° si iar 90°

[@mecanicamator5426]

@@WRCgarage multumesc..

[@markomikic6394]

Max gap compresion ring?

[@WRCgarage]

I've got another video where i explain all details for each individual ring, just check my channel

[@simoneelamanutenzione]

Bel video ma perche lubrifichi la guarnizione di testa scusa ?

[@WRCgarage]

It's not necessary but i like to do it for a better contact

[@simoneelamanutenzione]

@@WRCgarage sei sicuro che migliori la tenuta io non ho mai lubrificato guarnizioni di testata ne quelle in metallo ne tantomeno quelle in materiale gommato

[@WRCgarage]

I just sayd "it's not necessary" but this is the way i do it

[@CavanşirƏsədov-e4o]

Super, Əla! 🇦🇿🇹🇷🇦🇿.

[@spacedevilcz6885]

What is the procedure to tighten the cylinder head, what is the procedure for ARP nuts? bought ARP head bolts, but I can't find the procedure. Good video :)

[@WRCgarage]

You could simply check my channel and you could find the answer very quickly.

[@simonkrezias7615]

Great video.Rebuilding as it should be! Is there another with a Common rail tdi with two cams?

[@WRCgarage]

Thank you, yes it is the 16v ones

[@simonkrezias7615]

@@WRCgarage Thanks for your answer but have you put it up on YT,I cannot find it.

[@WRCgarage]

Unfortunately i don't have any video with 16v yet

[@yorkshireman7025]

Turbo? Injectors? Camshaft? I like flywheel noise at end of video when you let off the clutch😀

[@WRCgarage]

Hi, 😅 yeah the noise is from the single mass flywheel, turbo is GTB2566VK, firad 120 injectors, pipercam 272° cam, ive got all these details in another video as ive got to redo the engine because i had to replace the machined pistons with stock ones because of white smoke and heavy start at cold.

[@yorkshireman7025]

What does white smoke have to do with pistons. How heavily machined were they?

[@WRCgarage]

Mate when you machine the pistons you decompess the combustion chamber and obviously the engine wont be able to make pressure as it should for burning the diesel, just go on my tiktok wrcgarage and you will se some videos before and after.

[@joostsonneveld5407]

​@@yorkshireman7025white smoke is pure unburnt diesel in a hot exhaust. I used to have a small diesel tank to pump diesel into my hot manifold to make a 007 smoke screen😊

[@atrabanefiltruota]

mind sharing the tune for injectors? : trying to achieve something like you..)@@WRCgarage

[@sslife4444]

Amazing repair machine

[@gustavoquinteiro9108]

10:59 porque le pones aceite a la junta? no se le pone nada?

[@WRCgarage]

And if you oil it what would be the issue ?

[@gustavoquinteiro9108]

@@WRCgarage corres el riesgo que no se adhiera bien la junta con el block. el aceite con el calor se quema y genera una superficie no deseada

[@gustavoquinteiro9108]

@@WRCgarage es por eso que existen aerosoles especiales para eso.

[@WRCgarage]

@gustavoquinteiro9108 Do you think after 5 years of drag racing with a 330hp engine, it is supposed to still be working by now because of that or not? Also, do you think after tightening the cylinder head to torque specs, there will be any sign of oil remaining there?

[@gustavoquinteiro9108]

@@WRCgarage por eso te preguntaba, si decis que no queda señal de aceite, para que lo pones? es una pregunta...

[@SmartDataSolutions-t6u]

O mică întrebare am si eu 🆘 daca iau tacheți noi dupa ce ii desfac din ambalaj ii montez pe chiulasă asa cum vin nu ? 🤔 Iar daca tachetii vechi daca sunt buni 🤔 se mai descarca de ulei si se pun goi pe chiualsa sau 🤔 aici nu inteleg cum se montează cu ulei in ei sau ii golesc 🤔🆘🤌 ! Aștept un răspuns mulțumesc

[@WRCgarage]

Salut, nu conteaza daca bagi ulei in ei sau nu, daca nu bagi este posibil sa se auda tacanit la relanti la prima pornire pentru câteva minute pana se incarca ei de ulei, daca totuși vrei sa bagi, dupa ce ii scoti pe cei vechi afara pui ulei in locaș acolo puțin iar pe ei la jumătate ai cate o gaurica si pe acolo pui cate putin ulei in timp ce apesi in interiorul lor pe acel pin si se vor amorsa cat de cat, dar in general eu pun doar ulei in locul lor înainte de montare dupa care ulei pe ei de jur imprejur la montare si nu am probleme.

[@robertalex9433]

Te salut, cat a costat refacerea acestui motor ca si piese + manopera, as vrea sa fac asta pe un golf 5

[@WRCgarage]

@@robertalex9433 Salut, vezi ca mai este un clip cu rebuild si are in descriere absolut tot ce s-a bagat in el, manopera am făcut-o eu.

[@robertalex9433]

@@WRCgarage aa da tot tu esti :))))) tot acolo te intrebasem ca nu citisem descrierea

[@dawooddavids3327]

Whats your torque setting for the pistons?

[@WRCgarage]

@@dawooddavids3327 Check my other videos

[@dawooddavids3327]

@@WRCgarage thanks 👌

[@WRCgarage]

@@dawooddavids3327 kzbin.info/www/bejne/a4CVo2eZeqiZo7csi=YB77XePo7dPh5jP5

[@robertopiras9746]

Why did not use trimetal main bearings?

[@WRCgarage]

@robertopiras9746 I haven't heard about that and i don't see why not use this as long as the car had 330hp for 3 years on drag racing without any issues...

[@robertopiras9746]

@@WRCgarage i used selling the reinforced bearings for tdi engine from 110 hp and for pdi engines

[@powerbylightfutureisnow1579]

Very good 👍

[@FarasFaras-ht1oe]

شكرا شكرا اخي شكرا احسنت احسنت🎉🎉

[@krystianrakoczy7330]

Hi what screws did you put on the head I saw that ARP but the exact number

[@WRCgarage]

Hi, they are special made they not come as a kit like all the others wich ar weaker chrome-molly 8740. Just go on the website where i get them and order from there, they dont have these anymore due to cost of supply but they have even a beeter one stronger than these for same price so just go on website Whitbread performance llc USA and buy from there.

[@marsflexin2590]

i have i question, i want to learn building engines like this, how should i start ? any suggestions ?

[@WRCgarage]

@@marsflexin2590 Just watch my videos 😅

[@bvcvcc1289]

Wtf dude, you found the best video on the internet. Just buy the tools and do EXACTLY what he does. (After endless studies of your engine type, parts etc)

[@jackjones-er1ts]

what does the bottom ring on the piston do?

[@WRCgarage]

@@jackjones-er1ts A piston ring fitted at the lower end of a piston it is used to remove excess quantities of lubricating oil from the cylinder walls and return it to the crankcase.

[@mohammedsahloul4293]

صمام واحد لكل اسطوانه ؟ هل هذا محرك ثنائي الشوط ؟ وما نوع السياره من فضلك ؟

[@WRCgarage]

Audi 1.9 tdi pd 8v

[@victorgonzalez814]

What torque wrench brands do you use? And what brand is the magnetic base angle meter adapter?

[@WRCgarage]

Toolhub 8012 and Sealey Torque Wrench Set STW900SET

[@АлександрКоваленко-у6г]

Добрый день,а чем смазывали прокладку гбц ,и зачем.

[@WRCgarage]

Hi, it's just new engine oil, i like to do that evertime, it's not necessary but i always do it for a better contact.

[@АлександрКоваленко-у6г]

Спасибо 😁

[@WRCgarage]

You're welcome !

[@ballybunnionbhoy]

Awesome engine work Sir ! I have the 1.4tdi AMF 3pot PD version with a massive 75horses , what magic could you work on it, if in your HANDS ?

[@WRCgarage]

Hello mate, i haven't work with that engine but definately it can be upgraded a bit.

[@Belzebub54]

Hey guys,1.4 PD is literally a 1.9 with one cylinder take away so for the most bit the procedure is the same but there isn't as many parts available when it comes to going over 160 horses because cams are a ballache to get hold of.Other than that Firad injectors 50+,then ported head,custom manifold,hybrid turbos are available online,Cooler and map the same as 1.9 basically.I've seen one in the past rocking around 180 HP.Quite nippy but not worth the investment in my opinion as the engines longevity and mpg goes Down the drain.Better to swap for 1.9 or just get a 1.9 car.

[@nikolabozinovski2041]

Upgraded hydro tappets?

[@WRCgarage]

Mechanical lifters...

[@nikolabozinovski2041]

@@WRCgarage darn that's a first for me... i presume you're referring to classic "puck" style lifters? If so, have you had any issues with noise or wear? I'm sure you're aware that PD's eat away at their OEM tappets over time and that can be accelerated by increasing power. I don't want to bombard you with too many questions but I'll try to keep it short and direct. Have you had any issues with Injector lean? And by that i mean the injector wearing out it's factory seats, I've heard countless people struggling with the same issue and no one can really figure out a non invasive "fix", people just usually replace their head.

[@WRCgarage]

Hello, i haven't had any problems by now with the mechanical lifters and they sound really nice, the injectors aswell ive had no problem with the wearing seats but ive heard people having that problem, i suppose that happened because of bad installation not a factory problem, there are still people who reuse the old bolts and not tighten enough to avoid breaking them wich causes the injector wearing, this is my opinion

[@nikolabozinovski2041]

@@WRCgarage thanks for getting back to me! as for Injector seat wear I've only ever seen it once on a BLS and it was quite bad, i think it might have to do with setting the torsion value with the cam gear, while changing the timing belt many people forget or don't know how to set the torsion value on these engines and that's pretty crucial for adequate longevity and performance.

[@traianraduastelean8016]

Felicitari🙌🙌🙌 E mai indicat cu prezone decat cu suruburi arl?

[@WRCgarage]

Salutare, prezoanele le punem doar când modificam motorul pentru ai crește puterea, altfel nu este necesar, cele stock 12.9 sunt de ajuns.

[@traianraduastelean8016]

Si ce prezoane sunt? Subministresza veicomer pentru ca chilasa am vazit ca e de la ei ? Cati caí e targetul si ce boost?

[@WRCgarage]

Sunt ARP2000 din America comandate, la noi nu se gaseste decat ARP8740 Chome Moly care sunt mai slabe ca ARP2000. Target nu am, boost 2.5 bar @ 350hp

[@dn116]

Ar fi folositor să știm și noi cuplurile de strângere la șuruburi , piulițe etc Cum adică tacheți mecanici ? Există așa ceva pe 1.9 pd ? Ce firmă sunt și cât costă aproximativ ?

[@WRCgarage]

Am multe clipuri pe canal numai cu 1.9 tdi toate operatiile cu cupluri de strangere si detalii, tachetii mecanici nu se pun pe un motor stock doar dacă il modificăm.

[@алексейдиколенко]

Брат, подскажи для чего ты намазал маслом прокладку головки блока цилиндров?

[@WRCgarage]

Hello mate, you don't need to but i always do it for a better contact

[@evgenvw951]

​@@WRCgarageобычно наоборот,нужно обезжирить блок цилиндров и поверхность головы,а вы наоборот маслом))это на самом деле лучше или правильнее?

[@WRCgarage]

@evgenvw951 Hello mate, i always clean well the cylinder head and engine block surfaces but i like to oil the gasket because i fell that will make a better seal when i tighten the bolts, i know it it not necessary to do that but it's not wrong aswell if you do it.

[@evgenvw951]

@@WRCgarage thank you,bro👍

[@Florynsv]

Da' cuzinetii de la axul cu came nu ii schimbi? Cel putin primul de la distributie avea uzura pronuntata pana la cupru.

[@WRCgarage]

Sunt noi, tot motorul a avut 860 km nici rodajul nu il facusem, am schimbat pistoanele alezate cu altele stock, cuzinetii la axa nu sunt uzați nici măcar nu si-au făcut fata pe axa, nu am schimbat axa ca sa schimb cuzinetii ei avand doar 860 km de cand i-am montat noi. Credeți-mă ca stiu ce fac si nu este vorba de bani aici, dar când nu este nevoie nu se schimbă.

[@serghiemihnea2091]

am un asv dus la 270-280 cp.. am refacut curand motorul, mi-a recomandat cineva pt forja ulei motul 10w-60 , parere te rog?

[@WRCgarage]

@@serghiemihnea2091 Sincer nu știu, eu folosesc decat motul specific 5w40 50501 si nu am avut probleme deloc

[@serghiemihnea2091]

@@WRCgarage ok multumesc, o sa l incerc

[@mercenarul4338]

Salut la schimbarea segementilor este nevoie de honuirea cilindrilor?

[@WRCgarage]

Salut, nu neapărat, numai daca au fost honuiți cilindrii.

[@nilsons28]

Hei, what connecting rods are you using?

[@WRCgarage]

Hello, just read the description !

[@robinschweizer2471]

you forget One uniqe step , you should hammer after Crankshaft bearing no.3 before right and left on Crankshaft and than give torque and angle on the screws ,... but nice video :)

[@WRCgarage]

Everyone thinks that but i haven't forgott, they are new they have 860 km on that new head with new lifters and new camshaft, i just took the lifters out for a modification and put everything back, so no reason for new bearings as they are new.

[@v0tke245]

Hi what the point to lubricate head gasket?

[@WRCgarage]

Read the comments!

[@silidagreat]

Câți kilometri ține un motor din acesta? Mulțumesc❤

[@WRCgarage]

Daca il pastram stock si este intretinut tine si 1 milion

[@marianraicu5339]

Biele serioase de la Pro-Race,mergea si la palier un kit de prezoane ARP. Cati cai vrei sa scoti din el?

[@WRCgarage]

Nu am gasit pentru pd ce am vrut eu arp2000 dar merg cele stock fara probleme, are deja 380 cp si imi ajung deocamdata

[@hernanmendoza5930]

Buenas noches, si no es molestia. Me podrias decir el numero de pieza de los pistones forgados ?

[@WRCgarage]

Hi, they are ProRaceEngineering for 1.9 tdi PD, they have a Facebook page and website with same name.

[@1vantheterr1ble47]

I see a lot of very precise measuring - for what? They sent you the wrong parts?

[@WRCgarage]

This is a must when you rebuild an engine, no wrong parts

[@george199779]

y did you put oil on the head gasket?

[@WRCgarage]

You don't need to but i always do it for a better contact

[@george199779]

but does that lead to blown head gasket?

[@WRCgarage]

@george199779 😂 no, it has nothing to do with engine performance

[@george199779]

@@WRCgaragei know but i thought maybe its doing something with the engine temperature, u know cuz either is going to exit the thermodynamic system in aerial form or liquid form, so it may sound stupid but i thought if that oil in the head gasket either is going to burn or its going to get mixed with coolant you know

[@РусПутин-щ5ъ]

Прокладку гбц нужно смазывать маслом?🤔

[@4G63-z5r]

La ce suma ajunge recondiționarea unui motor? Nu de alta dar am unul de mazda 1.6 benzină ce trebuie oarecum recondiționat deoarece era pe GPL iar la cilindru 4 deja pierdea compresie. Ma interesează sa stiu daca se merita sau nu. Mulțumesc anticipat!

[@WRCgarage]

Salut, depinde de motor si ce vrei sa schimbi la el, nu stiu la alte motoare pentru ca nu ma pricep decat pe 1.9 tdi pd, dar in jur de 3500-4500 lei costa toate piesele de calitate buna, poti intrar pe autodoc de ex si iti bagi masina ta si cauti toate piesele le bagin in cos si vezi estimativ.

[@lvdautomotoservicemobile-bs4sg]

Suuuuuuper ❤❤❤

[@WRCgarage]

Mulțumesc 🙏

[@АртёмБуйневич-ю5ч]

Hi, can you tell me? What Compensators manufacturer you use?

[@WRCgarage]

Hi, JP GROUP 1511400100

[@АртёмБуйневич-ю5ч]

Thank you

[@dp8685]

Why smear oil on head gasket?

[@WRCgarage]

I answered to another 50 with the same question, it would help me if everyone check the comments before, the oil is not necessary but i just do it because i fell that in that way will seal better but again its not necessary.

[@M22garage]

Hi, I saw the full video, congratulations, just the tightening of the ARP head is not correct, the block will end up giving way.

[@WRCgarage]

Hi mate, thanks, that are the specifications from arp manufacturer, i did this job about four times and not an single issue by now.

[@M22garage]

@@WRCgarage I'm glad you've never had any problems, and I hope you never do, I never do it like that, but everyone works differently.

[@WRCgarage]

@M22garage I just followed the ARP instructions and i had no problems, and im sure they won't be as long as that ive been told to do, not rumors or advices

[@wassaab9683]

How much power that engine could make?

[@WRCgarage]

Depending what turbocharger you install on it, he can hold without any problems 600 hp as it is build now.

[@gratefultrucker7781]

​@@WRCgaragefor 0.1 seconds.😅

[@thanhnguyen4908]

Awesome

[@adrianilie9081]

Salut, ce vopsea ai folisit la bloc ?

[@WRCgarage]

Salut, o vopsea foarte proastă 😅, cauta ceva bun ca majoritatea sunt foarte proaste, ce am eu doar arata bine pe video dar se sterge imediat.

[@KarpaDanny]

Salut. Faina treaba. O intrebare. Stiu ca ARP se strang diferit fata de cele OEM ARL. Spune.mi te rog pasii cum le.ai strans? Mersi mult. ❤❤❤

[@WRCgarage]

Salut, am video complet pe canal cum le strang si ce cupluri

[@tomassobota5619]

Nice to see you :) what do you put on the screws, is it lubricant or screw glue? Thank you

[@WRCgarage]

Hello mate, it's ARP assembly grease.

[@Barbara-p9u]

how much did the generalka 1.9 tdi engine cost

[@WRCgarage]

@Barbara-p9u Somewhere a bit over 9k.£ just in the engine, ive got a video with all the parts in the description .

[@dorinbugnar5930]

Salutare ! Pistoanele, cuzinetii si garnitura de chiulasa sunt stock ?

[@WRCgarage]

Salut, da !

[@dorinbugnar5930]

@@WRCgarage și estimativ cam pana la ce putere ai putea sa ajungi cu aceste piese, ca să fie cât de cât safe ?

[@WRCgarage]

@dorinbugnar5930 Poti face si 600 cu ce am eu in motor, bineînțeles cu nos si turbina capabilă

[@dorinbugnar5930]

@@WRCgarage am înțeles, nu tinteam asa sus, 300 îmi sunt peste cap. Ce biele ai folosit ?

[@WRCgarage]

@dorinbugnar5930 Am clipuri cu tot ce am pus in motor unul din ele are in descriere si banii investiți, biele proraceengineering

[@lubieplackixd7255]

Smarować uszczelkę pod głowicą ja to zawsze odtłuszczam dokładnie blok głowice

[@WRCgarage]

If you give me only one reason why i shouldnt oil it i wont do it anymore !

[@bertbox69]

Only on restoration projects do engines get rebuilt nowadays, everything else is recycled or new if you can afford it. Warranties would never pay for this level of rebuild

[@manuelstouy8148]

hallo mein freund! Hast du den motorblock planschleifen und bohren lassen oder einfach low budget power?😄

[@WRCgarage]

Yeah 9000 £ low budget power engine 🤣🤣🤣

[@manuelstouy8148]

@@WRCgarage wtf, where is the money?🤣🤣🤣

[@WRCgarage]

​@@manuelstouy8148 Ive got more videos where i detailed the spendings on the engine but people just send h8 instead to check it first.

[@Гринго-н6н]

Nice. Give name tuning parts? What is hp ?

[@WRCgarage]

See description on this video for parts and prices kzbin.info/www/bejne/g6DHqXqsg5yfjsUsi=D46ctKWKfG_zgo9e , 350hp and @600nm

[@Гринго-н6н]

@@WRCgarage Thanks greetings from Bulgarian.

[@Durresdurres1604]

How much cost total parts where can i found ,

[@WRCgarage]

8136 £, list in the description here : kzbin.info/www/bejne/g6DHqXqsg5yfjsUsi=RhXb4Qkn7tGUwkX3

[@erg-su8086]

Solo vi dos piezas,los casquillos y las bielas,lo demás no sale en el segundo video como me comentaste 🤷🏻‍♂️

[@WRCgarage]

@@erg-su8086 kzbin.info/www/bejne/g6DHqXqsg5yfjsUsi=WcfBexi3N8sOqVMF