New Tekton Hand Tools Socket Set Ratchets and Stubby Wrench Organization must haves tool Haul

New Tekton Hand Tools Socket Set, Ratchets, and Stubby Wrench Organization must haves
www.tekton.com/
SKT05301 $55.00 www.tekton.com...
1/4 Inch Drive 6-Point Socket & Ratchet Set, 55-Piece (5/32-9/16 in., 4-14 mm)
6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads
Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off
Extra-large die-stamped size markings are easy to read and can’t wear off
Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
Four detent grooves provide a secure connection with the drive tool
Beveled inner rim of the socket opening helps guide it smoothly onto fasteners
Sockets come organized in a sturdy case that features strong latches and clear, molded markings for each tool
SHA24103 $10.00 www.tekton.com...
1/2 Inch Drive (F) x 3/4 Inch (M) Adapter
Connect 1/2 inch drive tools to 3/4 inch drive sockets and accessories to expand your range of available tools
Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
Beveled drive end helps guide extension smoothly onto drive tool
Four detent grooves provide a secure connection with the drive tool
Radiused corners inside drive avoid stress concentrations that can cause cracking
A spring-loaded retaining ball latches into sockets and hold them securely in place
SRH31006 $20.00 www.tekton.com...
1/4 Inch Drive x 6 Inch Flex Quick-Release Ratchet
90-tooth gear produces a working swing arc of just 4 degrees
180-degree, 9-position flex head lets you approach your work from any angle
Ultra-compact head is reduced in height, width, and length
Quick-release drive tang locks securely on to sockets
Sleek and simple handle design offers comfort and control in a variety of hand positions
SRH23112 $28.00 www.tekton.com...
3/8 Inch Drive x 12 Inch Flex Head Bent Handle Ratchet
90-tooth gear produces a working swing arc of just 4 degrees
180-degree, 9-position flex head lets you approach your work from any angle
Ultra-compact head is reduced in height, width, and length
Non-quick-release drive tang retains sockets with a spring-actuated detent ball
Sleek and simple handle design offers comfort and control in a variety of hand positions
SRH01118 $35.00 www.tekton.com...
3/8 Inch Drive x 18 Inch Ratchet
Long handle provides extended reach and extra leverage
90-tooth gear produces a working swing arc of just 4 degrees
Ultra-compact head is reduced in height, width, and length
Non-quick-release drive tang retains sockets with a spring-actuated detent ball
Sleek and simple handle design offers comfort and control in a variety of hand positions
ORG27212 $10.00 www.tekton.com...)
Stubby Combination Wrench Pouch, 12-Tool (8-19 mm)
Tailored cover keeps wrenches from sliding out when rolled up
Fabric hanging loops, instead of metal grommets, prevent scratches when laid on finished surfaces
Strong and flexible woven polyester fabric rolls easily and lays flat
WRN50108 $9.00 www.tekton.com...
8 mm Stubby Ratcheting Combination Wrench
WRN50110 $10.00 www.tekton.com...
10 mm Stubby Ratcheting Combination Wrench
Short length is easy to operate in areas with limited room
6-point box end snugly fits hex-shaped fastener heads and resists slipping off while you work
Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off
72-tooth ratchet gear needs only a 5-degree working swing arc
Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces
Tekton tools are Always Guaranteed®. www.tekton.com... a tool becomes yours, they try to help you no matter where you got it or how long ago.
Their guarantee has no time limits and no fine print-just personalized solutions. Shipment of replacement parts are always on Tekton free of charge.

[@andybub45]

I love how Tektons sets are all no skips. I always refer to Tekton as the new Craftsman.

[@danmckevittstoolsbagels3258]

I am a huge huge huge fan of tekton stuff, I have a ton, even some of their older stuff. I love the quality and that continues to always improve their line of tools!

[@scottfirman]

Went from an Ace Hardware socket set to a Craftsman set years ago. They contine to serve me well and now Ace sells craftsman. As with any tool, you learn by experience what works. If you are busting knuckles over broken sockets and wratchets, its time to change brands. I use and abuse my tools, they do not sit in the box looking shiny and new. I recently broke my long 3/8 flex head wratchet from craftsman. It was replaced no questions asked. I broke it changing a sway bar linkage, no light weight job. I wouldnt mind a set of stubby gear wrenches.

[@truckerpeterose]

I am slowly getting the upgraded ratchets. I have the 3/8” regular and extended non quick release ratchets and I honestly feel they are the best ratchets in my box. I like my 120xp ratchets and my snapon but always reach for these new Tektons.

[@FinallyMe78]

The new 1/4 drive set fixes most of the minor problems of the old set. They added 4 and 4.5 mm, and have slim headed ratchets. Add a 1/8 for perfection.

[@DaleLucid]

I'm not sure how I missed this GREAT tool haul until just now. Those Tekton tools are almost like jewelry.

[@adriannurse1502]

Yes they are! Now I need a Tekton fix! 😭

[@adriannurse1502]

Great video 👍 I just ordered that same quarter inch set just before the virus. After watching your video it makes me want to go Tekton shopping.

[@maxx_life]

Just got the tekton 3/8 and 1/4 metric socket sets. I like them but something i didnt find on any tool reviews or specs prior to buying them is the shallow sockets are about a 4th of an inch longer than most other brands and the deep sockets are about a 4th of an inch shorter. I may not keep them due to this, sometimes you need just that little bit to fit in a tight space on the shallows, and on the deeps you may need just that little extra to avoid needing an extension which might make you to long. Anyways just my 2cents, thankd for the vid

[@410AutoTech]

I've never owned tekton tools but maybe my next purchases to try it!! Appreciate the shoutout!! Keep up the awesome channel!!

[@kencama2671]

Love the 6 point ratchets. They don't chew the bolts up!

[@Dee--Jay]

Tekton make the best tools

[@ClientGraphics]

I have no complaints so far

[@noobinho8882]

But facom is better.

[@estongjr.2105]

@@noobinho8882 really? I have facom brand ratchet set made in france

[@scottthetoolenthusiast4785]

Great haul! I want the 18” 3/8 ratchet after watching this video. Thanks for sharing.

[@buffalobluecheese]

Really enjoy your channel, was a drive-by viewer for months but the more I watched, came to appreciate the effort & detail put into your videos. I was brought up on Craftsman, have a complete Grey Pneumatic 3/8" impact set I luv, some HF Pittsburgh Pro stuff, but after buying the Tekton 1/2" 25-250lb torque wrench 3+ yrs ago I've gone out of my way to seek out Tekton items before making any tool purchases (I'm just a home DIY wrencher). The 1/2" impact hand screwdriver for removing disc brakes set screws is a solid built tool as well. Glad to see a company that stands behind it's tools with a "always guaranteed" warranty can stand up to the higher priced brand names you put them all thru " torque truth tests" I like to think of them. Keep up the great content, surely keeping a lot of us sane in this time of quarantined "social distancing"....

[@PawOfRizzo]

Nice set! I do like the void in the case for storing nuts or bolts as needed.

[@felixf5211]

Impressed by the packaging and presentation from a value brand. Professionall. Really liked the long ratchet. I have some of their US made hand tools and 3/8 drive impacts. No complaints.

[@scott2228]

Strongly considering investing in this brand. Great review. Love the 1/4 flex head ratchet. Need that one 1st.

[@donaldhollums3278]

I received the Tekton 1/4" drive ratchet and socket set as a gift. The only difference is the ratchet is the older 72-tooth design. I'm impressed with Tekton, unfortunately there isn't a retail store anywhere near me.

[@keithwittman4741]

Order online! Amazon or company directly.

[@donaldhollums3278]

@@keithwittman4741 yeah, I always try to buy local first, if not I'll order directly from the Company. I'll give Amazon as little money as possible.

[@410AutoTech]

The bent handle looks similar to 1 that o own which I purchased from cornwell 8 years ago

[@derekquinones8614]

I just got the 74 piece 6 point 3/8 tekton set looks very nice so I picked it up..

[@amybanksfendrick135]

Great video! I know lots of family members that might want that shirt!

[@bobbygarrett9588]

Awesome Tekton tool haul! Thanks Chris for another great video. Tekton has came a long way. Thanks Again.

[@aux1z11]

I just bought that 1/4 set and a thing of impact sockets and the everybit set, going for the largest 3/8 and 1/2 sets next but after I order my ingersoll 7152 , I also ordered that 1/4 flex ratchet and when folded it fit perfect in the square storage spot in the case along with some bits.

[@charlieretherford]

Looking to get the long ratchet would like to see a torcher test on that one

[@johnd4348]

Up grading my tools. Most are big box tools (lowes , Home depot and harbor Freight.) Started a new job and I need better quality tools. Even the packaging looks good. I will be spending a months income on these tools. But hopefully ,the last tools I buy. It's a big investment for me.

[@kamthan7995]

Bought one 3/8 tool set one of the sockets break in half.have to use craftsman tools to take out the stubborn bolt that tekton give out.i only use less than 6 time.the tools is good for the price

[@johnaranjo2059]

they should go up to 15mm in quarter inch..

[@beardedtoolreviews7185]

They do sucky part is you have to buy it extra

[@brokebikemtb4448]

I have tekton metric wrenches and there 3/8 impact deep and they are really good quality...these ratchets look too similar to husky ...i have some husky ratchets and they aint junk but they aint nothing to write home about

[@georgeburns7251]

Hopefully the chrome polish wii assist with your hemorids. Thank you for sharing your medical condition.

[@MonStruO72]

They aren’t my tools but I’m excited

[@babydyke416]

I can't wait to get some tekton wrenches!! Other things on my list to tackle first though! Then I will get some tekton wrenches and start my collection of tekton impact sockets!! I'm just a DIY chick but I like to have the tools before I need to use them lol. Thanks for another great video, I also follow the others you mentioned at the end!

[@johnbailey2034]

Went back to see and that was a 3/4 drive so not a 3/8 drive but still like the price of there tools and they do the job .

[@ifitsnotbrokenfixit1193]

Thanks for the video. Tool hauls are always awesome.

[@TheHotandshot91]

Look great but I will always only run Snap on ratchets they are the best in the biz hands down but otherwise these actually look somewhat promising minus the clicking flex heads that’s a cheap gimmick just my opinion. Great video

[@daviserafini2022]

Cool! Very cool! The USA is an extraordinary country. It has everything. I bought this bag at TEKTON and paid a lot just to bring it to Brazil. About US$200. I even cried, but I bought it. I had to pay 230% tax to financing government criminals.

[@martinschaffmeir7729]

Nice post sir. I don't have any tekton tools ... Yet

[@josephriddle2772]

I just subscribed, i bought the complete Tekton 1/2 dr set, luv um, no problems with them

[@ClientGraphics]

Best priced complete 1/2 dr set available. Includes an easy warranty process as well should on ever have an accident. I know I broke a clip on the case hinge and they sent me 2 new replacement clips to fix the one.

[@johnbailey2034]

Tekton does make a longer ratchet I think it’s 22 inches .3/8 drive .

[@rmoore07]

That stubby wrench organizer looks nice! Would it work to hold 8-19mm 3/8" standard length Tekton sockets? It looks like the sockets would be a close fit. Not sure if it would still roll easily though. It would be really nice as a keep-in-the-car socket organizer.

[@jtoker9758]

2+ years later, how does the locking on the flex head hold up?

[@BradsWorkbench]

Nice segue

[@ClientGraphics]

Brads Workbench Saving space and tossing @Junk From Work in seemed appropriate. I had to voice over cause I couldn’t stop cracking up.

[@truckerpeterose]

Can you please compare those new sockets to the old ones? I am considering buying the 1/4”, 3/8” and 1/2” all over again.

[@ClientGraphics]

It's on my list but I won't be able to do a full old to new set comparison as I only have the older 1/2" set and new 1/4" set. But I do have 1 new 1/2" drive deep socket in 21mm that I will compare old vs new socket. I can tell you that I like the new size stamping but they changed or removed the inner coating so I would stick with the old set of sockets if you have it. I do prefer the new ratchet over the old.

[@ozemirdoespiritosanto2151]

Ferramentas d boa qualidade os americanos tem qualidade de ferramenta parabéns

[@ozzysgarage]

I am thinking of trying these next. Sad to see some of the Craftsman quality slipping in my recent purchases :/

[@estebandelatrinidad9241]

I’ll have to have it.thanks to your channel brother

[@bryantint1339]

May need a 9mm wrench later.

[@aurelioperez3517]

Really nice

[@skgousepeddabaji1062]

Nice tools

[@ottohibl9212]

I’m looking to buy a full socket set for under $450. What would you suggest?

[@markwelschmeyer2426]

they are working to move all production to the US

[@afara2000]

Are Tekton stubby wrenches made in Taiwan better than Gearwrench made in China? I just bought a Gearwrench stubby set from Carquest for $20 on sale. They are not reversible.

[@ClientGraphics]

Pirouz Farhani They are very similar. The GearWrench I had were all 12pt but for something like a stubby wrench to me it’s about access so it’s kind of a wash and they again are stubbies so the tools never receive too much torque or use. Both are a decent brands so it might come down to Price or 6pt vs 12pt or the coverage you need. I believe Harbor Freight has a 7 Pc metric stubby ratcheting wrench set for under $20 if you use a coupon, while it's not a complete set it's a great bang for your $$$

[@Don_ECHOguy]

That 18" - 3/8" ratchet sounds dry when you spin it... wonder what lube they use in it...real nice looking wrenches though, thx for the vid!

[@johnaranjo2059]

can always take the Torx screws out and grease it up. do that with every ratchet i get right away, well after spinning it dry so i can feel the difference. Tekton generally has a really thin layer of black grease inside.

[@m.jenkins8503]

I was more interested in a review of their quality. Especiallya review between kekton and u.s.a. made craftsman sockets, ratchets and wrenches.

[@moisesharo2432]

got. Lots of tekton tools awesome

[@nazrisemuni224]

awesome set of sockets! where can i buy them?? does anyone know if they deliver to malaysia

[@alconk7129]

I’m still trying to get used to there backwards on and off ratchets. What is that?

[@jimmyhallhallowen937]

Chris, what's your impression of the detents on the flex handle I read that on 3/8 Dr there not real positive and that it will easily move out of position. Would you recommend tekton tools

[@ClientGraphics]

Just picked it up yesterday, but my first impression would be that the flex is better than the Harbor Freight ones that only work on friction. With a 17mm standard socket you can do a slow wave and it won't move but if you speed up it will and I didn't try a deep socket. It would to me be similar or better than some GearWrench that just use the single pin/ball detent. I guess I could put on my list to compare it to a Gearwrench one that I have at home if others are interested.

[@themaintenanceman1]

Hey Chris great video! I have some tekton stuff and it’s been great so far! The 18 inch one caught my eye. I might have to purchase. Did you go through them directly or get off amazon? Thanks for the video and thanks for the shoutout! 👍 keep the videos coming! 🍻

[@ClientGraphics]

Did you catch your channel shout out at 9:36? I went to Tekton.com free shipping on orders over $50 and 10% cash back reward to use for a future purchase within a year or so as they do expire. Price was the same on Amazon vs Tekton.com the last time I checked. Just have to see what is cheapest for you.

[@themaintenanceman1]

ClientGraphics I sure did thanks again for that brother! I really appreciate it! And great transition into junk from work lol. I think I might have to grab that 18inch one . Awesome video and thanks again man!!

[@allanb3222]

@@themaintenanceman1 It has the right amount of leverage in a ratchet. I'm liking mine !!

[@themaintenanceman1]

allanb3222 yeah I’m gonna have to get one now for sure!! 👍 thanks!

[@LongIslandP8ntball]

What else would you use a 5.5mm on? I know it's for a old GM distributor

[@ClientGraphics]

Ford has some interior screws around the dash area on some models and a few stereos if I recall correctly. Seems like a lot of sets skip either 4.5 or 5.5 or both and if you were to need one they are likely $4 or more each. Now you could probably use pliers or a needle nose or something else since you can't tighten a little bolt like that very tight it might come down to access. Tekton is a big proponent of not skipping sizes. You don't even want to know how much a Snapon 4.5 shallow and deep socket will run you, $40.80 just for the 2 individual sockets. The entire Tekton Socket Set was $55

[@felixf5211]

@@ClientGraphics I prefer having a complete 1/4 drive set, as well, with a 4.5 and 5.5mm.

[@allanb3222]

Alot are used around the steering column to mount switches.

[@FinallyMe78]

My Tahoe and Saturn have a lot of interior screws that are 5.5mm. 7/32 also works.

[@ViperMods_216]

Hell yeah brother

[@joebishman6163]

You are going to miss that stubby 9mm.

[@aurelioramosdonascimentona522]

Boa noite , como para obter esses produtos da marca !

[@trankt54155]

When do you know you have enough tools?

[@liuwiliam6946]

how much does a ring key box fit

[@izzynutz2000]

I thought that all Teckton stuff was made in Michigan right here in the good old USA

[@ClientGraphics]

Izzynutz Restorations The company is based in Michigan with a few wrenches and items made in the USA, most however is not made in the USA. I believe country of origin is listed on each item on the company’s website.

[@RajuSk-mf2wo]

Whats Price

[@MuffyThePomeranian]

new sub here great review thank you

[@ClientGraphics]

That’s awesome! I’m working on another Tekton and hope to have it done in the next few days!

[@1966johnnywayne]

Can you comment on the depth of the broach...shallow (SO) or deep like most?

[@ClientGraphics]

They are broached deeper than most sockets

[@1966johnnywayne]

@@ClientGraphics That's unfortunate. Thx for the quick reply.

[@gulabk65]

Good evening sir

[@austingoleman9431]

Looks weird not having any marks on the head

[@TryoRacer]

lmao "HEY guys whats up?, and welcome to my channel! *ANNIHILATES BOX*

[@diksonalboin537]

Saya ingin memiliki ini semua...🙏🙏

[@johngibson3594]

Nice score

[@BigEightiesNewWave]

Ford uses 5.5mm on some things.

[@abe7907]

The hell did that box do to you to punch it like that 😭😭😭😭

[@dannypalmer7701]

Yep my tools are useless in a tight spot.!

[@kalumakrani9391]

Atul box mangawa mate 11 Flipkart Amazon par kevirite magavanu

[@johnysilver1853]

Where do you buy Tekton tools?

[@ClientGraphics]

Online at Tekton.com

[@estongjr.2105]

Is this better than snap on?

[@ClientGraphics]

That’s entirely up to you, but I feel with such a large difference in price between brands you have to compare your options. Both have a lifetime warranty so the initial investment cost makes Tekton a better initial value. If you need the personalized tool truck service and visits then maybe it better to pay more and support your local tool franchisee.

[@estongjr.2105]

@@ClientGraphics thanks for your reply, here in phil. we seldom find usa made tools . I got snap on tools in a second hand tools store in kuwait which are all came from us army base. I would say its very good tools i been using it for 6yrs now.

[@MarkK01]

I have that same 1/4" set but for ssome stupid reason the ratchet that came with it spins in the reverse of what my Gear Wrench ratchets does. This is the only reason I will not buy a Tekton ratchet or socket set. I do not know why Tekton chose to make it that way but I hate it and it drives me nuts.

[@ClientGraphics]

Mark Is it the 72 tooth one because that is the one that has the backwards selector switch. The 90 tooth one was released in the last year and has the more normal selector switch. I don’t personally care for the older ratchets from Tekton.

[@MarkK01]

@@ClientGraphics Thank you for the update. Either way, it is a really stupid design.

[@MarkK01]

@@ClientGraphics So I talked with Tekton about this issue with the 72 tooth ratchet and they told me to stuff it. I will never buy another Tekton tools again.

[@ClientGraphics]

Mark Sorry to hear that Mark. I know I have seen others report they didn’t like the 72tooth ratchets from them. Hear is an interesting story, www.garagejournal.com/forum/showthread.php?t=419531

[@madan7885]

Contain Allen keys or not??

[@ClientGraphics]

Madan Kulkarni nope no Allen keys

[@granadojl]

Don't forget to add that Tekton throws in a 30% discount for trade students. Get the discount while it's hot.

[@ClientGraphics]

IMPORTANT NOTICE: Effective June 17, 2019 the TEKTON Student Program discount rate will change to 15% off all regular price items, with no spending limits, on tekton.com.

[@granadojl]

@@ClientGraphics fuck... I'm going back to school in a few months.... I'm going to miss the 30%

[@madan7885]

Is this available on Amazon, please reply

[@ClientGraphics]

Madan Kulkarni Somethigs are available on Amazon, yes. All the item/part numbers are in the description so plug them into Amazon search. The 1/4 drive socket set is item SKT05301 @ $55

[@junior7393]

Good video. But who says three fourth?

[@ClientGraphics]

Mid-West thing?? 3/4" vs three quarters inch it's the same thing to me.

[@sameerchoudhary8809]

Price

[@ClientGraphics]

Sameer Choudhary price and links in description

[@vikramlamba4183]

Sir Indian price

[@rameshchand6230]

Bhai cost kya ha

[@NguyenToan-to6sd]

Bán không

[@antoniocompetente8445]

Where made this

[@ClientGraphics]

Antonio Competente Country of Origin will be listed under the Spec of a product on the Tekton.com website. Most of the products in my video were from Taiwan

[@sidheekh1235]

Howmuch

[@mohammadghaderi5675]

Hello How much?

[@ClientGraphics]

They are all listed on the website Tekton Tools website bit.ly/2m9jMOr

[@minysmith9043]

Three QUARTERS

[@sunnykkk4934]

Cast

[@nagarajnaik5408]

🙋

[@raynelyfe1083]

I love u

[@patrickgitchell1115]

I thought tekton was made in USA

[@rrt08]

Patrick Gitchell many of their tools are US made, their warranty is very good, just send photos of damaged tool, they mail you new one.

[@lunchlady2023]

I get a chubby when I get new tools.

[@VinodPatel108]

Please Please Please Give me.........

[@vimaldetailingcarwash5201]

Indai prise

[@rajbahadur2162]

Haw मच sar

[@ClientGraphics]

Hey 👋 thanks for stopping by and commenting.

[@alensabovic2221]

🇩🇪🇩🇪🇩🇪🇩🇪🇩🇪🇩🇪🇩🇪👍👍👍👍👍👍

[@altonriggs2352]

Not buying Tekton tools while owned by Justin Amash.

[@RatsnestHotrods]

He's an Anti Trump Republican Representative that does a lot of business in China.

[@fivecrosses9040]

Ratsnest Hotrods got a source for that? I’d like to check that out.

[@crawdaddy019]

@@RatsnestHotrods source?

[@RatsnestHotrods]

@@fivecrosses9040 garagegazette.com/index.php?topic=1784.0

[@fivecrosses9040]

@@RatsnestHotrods thanks for the link. I visited Michigan this last September and looked at the tools. The tools I needed weren’t made in USA. So I passed. To bad, at the time I was supportive but, not impressed.